Microchip Technology

PIC12F609-I/MS - 8-Bit 20MHz Flash MCU | Microchip Technology

부품 번호: PIC12F609-I/MS ✓ 활성
8-pin MSOP Package 20 MHz Speed 1.75 KB (1K x 14 words) Memory
MOQ: 1 |

PIC12F609-I/MS 개요

Microchip Technology PIC12F609-I/MS is an 8-bit CMOS flash-based microcontroller with a 20 MHz maximum instruction-clock rate, 1.75 KB of program Flash, 64 bytes of RAM, and an 8-pin MSOP package. It combines a compact 8-pin footprint with an internal 8 MHz oscillator, making it suitable for compact control systems that do not require a large external component count.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital input/output ports, and peripherals into one device. The PIC12F609 belongs to Microchip's PIC12 8-bit Flash MCU family within the broader embedded-controller and embedded-processing hierarchy. Its small pin count and low-power-oriented architecture are useful when a product needs autonomous sensing, timing, state-machine control, or simple actuator management rather than high computational throughput.

The principal features of the PIC12F609-I/MS include 1.75 KB of Flash program memory, 64 bytes of data RAM, eight GPIO pins in the MSOP package, and operation up to 20 MHz. The manufacturer also identifies an 8 MHz internal oscillator for the device family. Flash memory permits field programming and in-circuit configuration, while the integrated oscillator reduces the number of external timing components needed in basic control boards.

Internally, the PIC12F609 uses an 8-bit architecture and includes dedicated port circuitry for digital input and output. Its compact pin allocation makes pin multiplexing especially important: several analog, timer, and control functions share I/O pins, so the datasheet pin table and device-specific peripheral descriptions should be used when assigning a board. The -I grade identifies the industrial-temperature ordering option, while the /MS suffix identifies the 8-pin MSOP package.

Typical uses include compact appliance controls, fan-speed controllers, industrial switch interfaces, simple sensor-conditioning systems, battery-operated instruments, and embedded timing modules. The internal oscillator and GPIO-focused design are particularly helpful in cost-sensitive designs where an external crystal, larger package, or high pin count would add unnecessary complexity.

Design the decoupling network with a local supply capacitor at VDD and route the ground return directly to the VSS pin. Confirm oscillator, timer, and comparator settings against the PIC12F609 datasheet, especially when shared I/O pins are assigned to sensitive inputs. The small MSOP footprint also demands careful assembly planning and adequate solder-mask spacing between adjacent pads.

This page combines manufacturer specifications, package and pinout guidance, replacement analysis, and practical design notes to support faster engineering selection. It also identifies which nearby family members can share the same footprint while clarifying the programming-memory and package differences that determine true drop-in suitability.

드롭인 대체품: PIC12F609-I/MS — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PIC12F609-I/MS (동일 폼 팩터 및 풋프린트) — 차이점: Internal Oscillator, Program Memory, Timers, Comparator, Package.

Microchip Technology
Internal Oscillator: 8 MHz (factory calibrated)
Timers: 1 x 8-bit, 1 x 16-bit
Microchip Technology
Timers: 1 x 8-bit, 1 x 16-bit
Microchip Technology
Internal Oscillator: 4/8 MHz user-selectable
Program Memory: 3.5 KB (2K x 14) Flash
Timers: TMR0 (8-bit), TMR1 (16-bit), TMR2 (8-bit)
Microchip Technology
Program Memory: 3.5 KB Flash
Comparator: 1 comparator with configurable hysteresis
Microchip Technology
Internal Oscillator: 8 MHz (HFINTOSC) + 31 kHz (LFINTOSC)
Program Memory: 1.75 KB (1K x 14) Flash
Timers: 1 x 8-bit (TMR0), 1 x 16-bit (TMR1)

PIC12F615-I/MS

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 8-pin MSOP
PIC® 12F · 8-bit RISC (Harvard) · 8-bit · Flash · 1.75 KB (1K x 14) · 64 bytes · 128 bytes · 20 MHz

가격 문의

데이터시트 보기 →

PIC12F617-I/MS

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 8-pin MSOP
8-bit RISC · 20 MHz · 8 MHz · 3.5 KB Flash · 128 B RAM · 6 pins · 25 mA · 35 single-word instructions

가격 문의

데이터시트 보기 →

PIC12HV609-I/MS

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 8-pin MSOP
PIC 8-bit RISC, 14-bit instruction word · 1.75 KB (1K x 14) Flash · 64 bytes · 128 bytes · 20 MHz · 5 MIPS · 2.0 V to user-defined VDD (typ. 5.5 V max) · 6

가격 문의

데이터시트 보기 →

PIC12F609-I/MS 최대 정격 & 전기적 특성

Device Type 8-bit flash-based CMOS microcontroller
Maximum Instruction Clock Rate 20 MHz
Program Memory 1.75 KB (1K x 14 words)
Data RAM 64 bytes
Internal Oscillator 8 MHz
Data EEPROM 0 bytes
핀 수 8 pins
패키지 8-pin MSOP
실장 유형 Surface mount
Architecture 8-bit RISC
Temperature Grade Industrial
GPIO Pins 6 I/O pins according to the 8-pin device configuration
Flash Programming In-system programmable flash
Terminal Form Gull wing
Package Shape Square

PIC12F609-I/MS 핀 구성

MSOP-8 Package Pinout Diagram MSOP-8 3x3mm, P0.65mm, JEDEC MO-187. 1 8 2 7 3 6 4 5 MSOP-8
핀 1 VDD — Positive supply voltage connection
핀 2 RA5/IC2/OSC1 — RA5 input/output, Timer1 input capture or output compare, or oscillator input
핀 3 RA4/T1OSC — RA4 input/output or Timer1 oscillator input
핀 4 RA3/AN3/PC3 — RA3 input/output, analog input AN3, or peripheral input PC3
핀 5 RA2/AN2/PC2 — RA2 input/output, analog input AN2, or peripheral input PC2
핀 6 RA0/AN0/ULPWU/C12 — RA0 input/output, analog input AN0, ultra-low-power wake-up, or comparator output
핀 7 VSS — Ground reference connection
핀 8 RA1/AN1/PC1 — RA1 input/output, analog input AN1, or peripheral input PC1

일반적인 애플리케이션

PIC12F609-I/MS 적합 용도: 6 애플리케이션s: Compact Fan and Motor Control, Industrial Switch and Sensor Interface, Battery-Powered Sensor Node, Appliance and Kitchen Equipment Controller, Simple Lighting and LED Control, Measurement and Calibration Controller.

🏭

Compact Fan and Motor Control

The PIC12F609-I/MS suits compact fan-speed and motor-control modules because its 8-bit core, 20 MHz maximum instruction-clock rate, and 8-pin MSOP footprint leave limited board area for control logic. The internal 8 MHz oscillator can simplify designs that do not require a high-accuracy external clock. An application can use timer and digital I/O functions for speed selection, start sequencing, fault detection, and controlled output updates. The device's 1.75 KB Flash budget is sufficient for compact state machines and fixed parameter tables, while 64 bytes of RAM can support short-term counters and status variables. Design the power stage separately because the microcontroller controls low-power logic rather than directly driving motor windings.

🏭

Industrial Switch and Sensor Interface

The PIC12F609-I/MS can act as the local controller for a compact industrial switch, remote sensor interface, or discrete condition-monitoring module. Its 8 GPIO-oriented pins in the MSOP package support digital inputs, outputs, and multiplexed peripheral assignments, while the 20 MHz maximum clock rate provides additional timing margin over an 8 MHz internal-oscillator configuration. Firmware can debounce inputs, implement operating modes, and update indicators without an external processor. With 1.75 KB of program Flash and 64 bytes of RAM, the device is best suited to compact control logic rather than large communications stacks. Industrial designs should verify temperature limits, supply behavior, and EMC requirements before production release.

🧩

Battery-Powered Sensor Node

A battery-powered sensor node can use the PIC12F609-I/MS when the node performs local thresholding, counting, filtering, or periodic sampling rather than demanding high-throughput data processing. The integrated 8 MHz internal oscillator eliminates a crystal in suitable timing applications, helping preserve the small MSOP footprint and reduce assembly cost. Its 8-bit architecture is well matched to simple sensor control loops, and the 64-byte RAM allows temporary measurement and status storage. Because the device has no data EEPROM, calibration values that must survive power removal should be compiled into Flash or managed in external nonvolatile memory. Final battery-life calculations require the operating-mode current and wake-up behavior specified in the Microchip datasheet 41302c.pdf.

🔧

Appliance and Kitchen Equipment Controller

The PIC12F609-I/MS is appropriate for appliance control boards that coordinate buttons, indicators, sensors, relays, and timing functions within a compact enclosure. Its 20 MHz maximum instruction-clock rate provides timing flexibility, while the internal 8 MHz oscillator can support economical fixed-function control without an external resonator. The 1.75 KB Flash capacity is useful for compact product-state logic, timers, lookup tables, and fault handling, and the 64-byte RAM can hold working variables for multiple short tasks. The MSOP package helps minimize PCB area compared with larger controller packages. Engineers should map every signal to the datasheet pin table because alternate functions share I/O pins, and should provide local supply decoupling for reliable operation near switching loads.

💡

Simple Lighting and LED Control

A compact LED driver or lighting-control module can use the PIC12F609-I/MS for dimming logic, operating-mode selection, fault reporting, and communication with external control hardware. The microcontroller's digital I/O resources are more relevant than raw computational throughput for these tasks, and its 8-pin MSOP package leaves room for driver components in space-constrained assemblies. Firmware can maintain timing state, apply lookup-table dimming profiles, and monitor enable or fault inputs. The internal 8 MHz oscillator simplifies many low-precision timing schemes, although accurate lighting calibration may require a suitable external timing reference. The MCU should not drive LED current directly; its outputs should control a transistor or dedicated driver stage with appropriate electrical isolation and protection.

💊

Measurement and Calibration Controller

The PIC12F609-I/MS can serve as a measurement front-end controller when the design needs signal conditioning decisions, calibration offsets, limit comparisons, and output updates on a small board. Its 20 MHz maximum clock rate gives designers headroom for timed sampling or digital filtering, while the 8 MHz internal oscillator supports applications where absolute timing precision is not required. The 1.75 KB program Flash and 64-byte RAM are appropriate for compact algorithms and calibration tables. Because the device includes no data EEPROM, persistent production calibration data must be stored in Flash or external memory. Engineers should verify the required analog and timer functions in the device-specific pin and peripheral tables and account for analog-ground layout when interpreting sensor measurements.

What is PIC12F609-I/MS?
The PIC12F609-I/MS is an 8-bit flash-based CMOS microcontroller from Microchip Technology with 1.75 KB of program Flash, 64 bytes of RAM, a maximum 20 MHz instruction-clock rate, and an 8-pin MSOP package. According to the Microchip datasheet 41302c.pdf, it is designed for compact embedded control applications that require programmable logic, digital I/O, and an integrated 8 MHz internal oscillator.
How much memory does the PIC12F609-I/MS have?
The PIC12F609-I/MS contains 1.75 KB of program Flash, equivalent to 1K x 14 words, and 64 bytes of data RAM. It has no data EEPROM. According to the Microchip datasheet 41302c.pdf, the Flash memory supports in-system programming, making the device suitable for firmware that can be configured or updated in the target circuit.
What is the maximum clock frequency of PIC12F609-I/MS?
The PIC12F609-I/MS supports a maximum instruction-clock rate of 20 MHz. Its 8 MHz internal oscillator can provide a lower-cost clock source when the application does not require maximum timing performance. The Microchip datasheet 41302c.pdf should be used to confirm oscillator-control bits, timing behavior, and the required configuration for the intended operating condition.
What package does PIC12F609-I/MS use?
The PIC12F609-I/MS is supplied in an 8-pin MSOP package with a gull-wing terminal form and surface-mount assembly. The /MS package suffix identifies this MSOP configuration, while the -I suffix identifies the industrial-temperature ordering option. The exact pad geometry and recommended land pattern should be taken from the manufacturer package drawing.
Where can I download the PIC12F609 datasheet PDF?
The official Microchip datasheet is available as the PDF at https://ww1.microchip.com/downloads/en/DeviceDoc/41302c.pdf. It covers the PIC12F609, PIC12HV609, PIC12F615, PIC12HV615, and PIC12F617 family members. Use its pin-description table, electrical-characteristics tables, and memory maps when designing the PCB or configuring the device.
Where can I find the PIC12F609-I/MS pinout?
The PIC12F609-I/MS pinout is defined by the manufacturer datasheet 41302c.pdf for the 8-pin MSOP configuration. Pins 1 and 7 provide the supply and ground connections, while the remaining pins implement GPIO and optional multiplexed peripheral functions. Use the pin-description table when assigning functions because several alternate capabilities share the same physical pins.
Where can I buy PIC12F609-I/MS online?
Use the Request a Quote form on this page to request current availability, minimum order quantity, lead time, and a formal quotation for PIC12F609-I/MS. The manufacturer lists the PIC12F609 family as in production, while contract terms and shipment timing should be confirmed when the order is placed.
What is the price of PIC12F609-I/MS?
Request a current quotation for PIC12F609-I/MS through the Request a Quote form on this page. The form can provide the applicable quantity breaks and commercial terms for the exact MPN. Quotation conditions may vary with order quantity, delivery schedule, and current component availability.
What is the lead time for PIC12F609-I/MS?
The current lead time for PIC12F609-I/MS should be requested through the Request a Quote form on this page with the required quantity and target delivery date. Microchip identifies the PIC12F609 as in production, but production status alone does not establish a fixed lead time for every order quantity or shipment schedule.
Is PIC12F609-I/MS in stock?
Use the Request a Quote form on this page to check the current allocation and delivery status for PIC12F609-I/MS. Enter the required quantity and destination so the quotation can reflect the applicable packing option and supply conditions. Microchip lists the underlying PIC12F609 family as in production.
What is the difference between PIC12F609-I/MS and PIC12F615-I/MS?
The PIC12F615-I/MS belongs to the same 8-pin Flash MCU family and uses the same MSOP footprint, but it provides additional program-memory capacity compared with the PIC12F609's 1.75 KB. According to the Microchip datasheet 41302c.pdf, firmware size and device-specific peripherals must be checked before treating the two devices as interchangeable.
Is PIC12F609-I/MS the same as PIC12F617-I/MS?
No, the PIC12F617-I/MS is not an identical device: it belongs to the same 8-pin family but has more Flash memory than the PIC12F609-I/MS. Both use an 8-pin MSOP outline, yet the larger program-memory capacity changes the firmware constraint. According to the Microchip datasheet 41302c.pdf, device features and peripheral assignments must also be reviewed before substitution.
When should I choose PIC12F609-I/MS over PIC12F615-I/MS?
Choose the PIC12F609-I/MS when the application fits within its 1.75 KB of Flash and does not require the additional resources of the PIC12F615-I/MS. The PIC12F609-I/MS can be preferable for simple fixed-function controls where firmware remains comfortably below the memory limit. Select the larger-memory family member when code growth, added tables, or more application features are expected.
What can replace PIC12F609-I/MS?
The closest documented drop-in candidates are the same-package PIC12F615-I/MS and PIC12F617-I/MS, while PIC12HV609-I/MS requires closer review because its high-voltage feature set changes operating constraints. According to the Microchip datasheet 41302c.pdf, pin compatibility does not by itself guarantee identical behavior; confirm memory size, supply limits, peripherals, and programming configuration before replacement.
What is the best equivalent for PIC12F609-I/MS from another manufacturer?
No cross-manufacturer drop-in equivalent for PIC12F609-I/MS is established by the available manufacturer family data. A competitor MCU would need the same 8-pin MSOP footprint, compatible power and I/O characteristics, sufficient Flash and RAM, equivalent peripheral behavior, and a verified toolchain migration path. The Request a Quote form can be used to ask for a formal sourcing review of a proposed substitute.
What are the key specifications of PIC12F609-I/MS that engineers should know?
The key PIC12F609-I/MS specifications are its 8-bit architecture, 20 MHz maximum instruction-clock rate, 1.75 KB of Flash, 64 bytes of RAM, 8 MHz internal oscillator, and 8-pin MSOP package. According to the Microchip datasheet 41302c.pdf, the device has no data EEPROM, so constant data should be stored in program Flash or RAM rather than assumed to survive power removal.
Can PIC12F609-I/MS be used for battery-operated equipment?
The PIC12F609-I/MS can be used in battery-operated equipment when its internal oscillator and compact 8-pin package suit the design, but battery-life calculations must include MCU run and sleep current under the selected operating mode. The Microchip datasheet 41302c.pdf supplies the electrical characteristics needed to compare active consumption, sleep behavior, and wake-up requirements against the battery's load profile.
Does PIC12F609-I/MS support automotive qualification?
The -I suffix identifies an industrial-temperature ordering option, not an AEC-Q100 automotive qualification. Automotive qualification status for this exact MPN is not stated in the manufacturer family listing, so it should be confirmed before use in a vehicle. If AEC-Q100 qualification is mandatory, request a specifically qualified automotive-grade part rather than assuming the industrial grade meets that requirement.

엔지니어링 참조 데이터: PIC12F609-I/MS — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the PIC12F609-I/MS for compact embedded-control products whose firmware fits comfortably within 1.75 KB of Flash and whose working set remains within 64 bytes of RAM. Its 8 MHz internal oscillator, 20 MHz maximum clock rate, and 8-pin MSOP package are effective when minimizing external components and board area are priorities. Choose the PIC12F615-I/MS when the application needs approximately 2.0 KB of program Flash but can otherwise remain within the same family configuration. Choose the PIC12F617-I/MS for substantially larger firmware or double the RAM, provided its peripheral configuration and toolchain requirements match the design. Consider the PIC12HV609-I/MS only when the board genuinely requires the family's high-voltage capability. In every case, confirm the exact MPN's package, supply limits, temperature grade, pin multiplexing, programming configuration, and qualification status before releasing the PCB.

대체품과의 비교

파라미터 이 제품 PIC12F615-I/MS PIC12F617-I/MS PIC12HV609-I/MS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-pin MSOP 8-pin MSOP - same 8-pin MSOP - same 8-pin MSOP - same
Architecture 8-bit CMOS microcontroller 8-bit CMOS microcontroller 8-bit CMOS microcontroller 8-bit CMOS microcontroller
Program Memory 1.75 KB (1K x 14 words) 2.0 KB 3.5 KB 1.75 KB
Data RAM 64 bytes 64 bytes 128 bytes 64 bytes
Maximum Instruction Clock Rate 20 MHz 20 MHz 20 MHz 20 MHz
Internal Oscillator 8 MHz 8 MHz 8 MHz 8 MHz
Data EEPROM 0 bytes 0 bytes 0 bytes 0 bytes
High-Voltage Feature Not indicated in the device-family summary Not indicated in the device-family summary Not indicated in the device-family summary High-voltage support
Temperature Grade Industrial Industrial Industrial Industrial

주요 차별점

  • Smallest program-memory requirement among the listed family alternatives (vs PIC12F615-I/MS)
  • Lower RAM requirement than the PIC12F617 (vs PIC12F617-I/MS)
  • Avoids high-voltage-specific device behavior (vs PIC12HV609-I/MS)

설계 노트

Place the supply decoupling capacitor immediately between the VDD pin and the VSS pin, with the ground connection following the shortest practical path back to the controller ground reference. Keep the capacitor footprint and trace short enough to provide effective high-frequency bypass. Because the MSOP pads are closely spaced, preserve adequate solder-mask dams between adjacent pads and follow the manufacturer's recommended land pattern during assembly.

Assign pins from the device pin-description table before laying out the PCB, since several I/O pins carry alternate analog, timer, and comparator functions. Reserve every required signal even if its peripheral is disabled initially, and avoid routing high-current or switching-node copper beneath sensitive input traces. A single ground reference should serve the MCU and nearby low-current sensing circuitry to prevent ground-current offsets from appearing as sensor errors.

Do not treat a shared package as proof that every family member is functionally identical. The PIC12F615 and PIC12F617 provide more program memory than the PIC12F609, while the PIC12HV609 changes the high-voltage operating regime. Before substitution, compare the device configuration bits, peripheral assignments, oscillator limits, supply range, memory map, programming configuration, and any application-specific qualification requirements against the manufacturer datasheet.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer lists the PIC12F609 family as in production. The -I suffix identifies the industrial-temperature ordering option, but it does not by itself establish AEC-Q100 qualification. Compliance status for the exact MPN must be confirmed with the manufacturer before regulatory or customer qualification.

관련 검색

pic12f609 datasheet PIC12F609-I/MS datasheet PIC12F609-I/MS pinout PIC12F609-I/MS specifications PIC12F609-I/MS price PIC12F609-I/MS stock PIC12F609 8 pin MSOP PIC12F609 20MHz microcontroller PIC12F609 drop-in replacement PIC12F609 vs PIC12F615 PIC12F609 vs PIC12F617 PIC12F609 equivalent PIC12F609 application circuit Microchip PIC12F609-I/MS PIC12F609-I/MS replacement

관련 부품 & 용어

Microchip Technology PIC12F609-I/MS PIC12F609 PIC12F615-I/MS PIC12F617-I/MS PIC12HV609-I/MS PIC12 8-bit Flash MCU family 8-bit microcontroller RISC microcontroller embedded controller flash memory program memory data RAM internal oscillator 8 MHz oscillator 20 MHz instruction clock MSOP-8 surface-mount package industrial temperature grade GPIO timer analog input comparator Microchip datasheet 41302c.pdf
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기