PIC16C662-04E/P - 4MHz 8-bit OTP MCU, 7KB | Microchip
부품 번호: PIC16C662-04E/P ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $8.95 | $8.95 |
| 10 | $8.05 | $80.50 |
| 100 | $7.15 | $715.00 |
| 500 | $6.4 | $3,200.00 |
| 1,000 | $5.75 | $5,750.00 |
PIC16C662-04E/P 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one die, enabling compact embedded control in appliances, automotive modules, and industrial subsystems. The PIC16C662 belongs to the mid-range PIC architecture, sitting hierarchically between 8-bit microcontrollers and the broader semiconductor / embedded-processing category.
Key differentiating features include a 14-bit instruction word, only 35 single-word instructions (most executing in 200 ns), integrated Brown-out Detect/Reset, Power-On Reset (POR), Watchdog Timer (WDT), and LED drive capability on selected ports. The RISC Harvard bus architecture and 8-bit data path deliver deterministic interrupt response for real-time control.
Operating from 4.0 V to 6.0 V (4.5 V to 5.5 V typical), the device supports up to 4 MIPS throughput. The OTP program memory makes each unit field-programmable once, ideal for low-to-medium volume production where mask-ROM volume economics are unattractive. Peripherals include an 8-bit timer/counter, capture/compare/PWM, and a synchronous serial port (SSP).
Typical applications include industrial automation controllers, automotive body and climate modules (extended temp grade), appliance control boards, and consumer-electronics interfaces. The 33 I/O pins comfortably drive keypads, LED arrays, and small relays.
Designers should note that the OTP memory cannot be erased, so firmware must be fully validated on a windowed or Flash equivalent before final programming. Decoupling capacitors (0.1 uF) must be placed within 5 mm of VDD/VSS pins, and unused I/O should be configured as outputs to minimize current draw.
This page synthesizes distributor pricing, same-brand drop-in alternatives from the PIC16C6x family, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: PIC16C662-04E/P — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC16C662-04E/P (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Instruction Cycle Time, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC16C662-04I/P
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$5.07 / 개
데이터시트 보기 →PIC16F662-I/P
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC16F74-I/P
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC16C662-10E/P
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC16F884-E/P
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC16C662-04E/P 최대 정격 & 전기적 특성
| Core Architecture | PIC 8-bit RISC (Mid-Range) |
| Instruction Word | 14-bit |
| 최대 클록 주파수 | 4 MHz |
| Program Memory | 7 KB (4K x 14) OTP |
| Number of I/O Pins | 33 |
| Supply Voltage Range | 4.0 V to 6.0 V (4.5 V to 5.5 V typical) |
| Instruction Count | 35 |
| Instruction Cycle Time | 200 ns (single-cycle), 400 ns (branch) |
| Peripherals | Brown-out Reset, POR, WDT, LED driver, Timer, CCP, SSP |
| 패키지 | 40-pin PDIP (0.600" / 15.24 mm through-hole) |
| 실장 유형 | Through-Hole |
| 동작 온도 범위 | -40 C to +125 C (extended grade "E") |
| Temperature Grade | Automotive / Extended |
| ROM Type | OTP (One-Time-Programmable) |
PIC16C662-04E/P 핀 구성
| 핀 1 | MCLR/VPP — Master Clear (reset) input / programming voltage |
| 핀 2 | RA0/AN0 — Port A bit 0 / analog input 0 |
| 핀 3 | RA1/AN1 — Port A bit 1 / analog input 1 |
| 핀 4 | RA2/AN2 — Port A bit 2 / analog input 2 |
| 핀 5 | RA3/AN3/VREF+ — Port A bit 3 / analog input 3 / voltage reference |
| 핀 6 | RA4/T0CKI — Port A bit 4 / Timer0 clock input |
| 핀 7 | RA5/AN4/SS — Port A bit 5 / analog input 4 / SSP slave select |
| 핀 8 | OSC1/CLKIN — Oscillator crystal input / external clock in |
| 핀 9 | OSC2/CLKOUT — Oscillator crystal output / clock out |
| 핀 10 | RC0/T1OSO/T1CKI — Port C bit 0 / Timer1 oscillator out / clock in |
| 핀 11 | RC1/T1OSI/CCP2 — Port C bit 1 / Timer1 oscillator in / CCP2 |
| 핀 12 | RC2/CCP1 — Port C bit 2 / Capture Compare PWM 1 |
| 핀 13 | RC3/SCK/SCL — Port C bit 3 / SPI clock / I2C clock |
| 핀 14 | RC4/SDI/SDA — Port C bit 4 / SPI data in / I2C data |
| 핀 15 | RC5/SDO — Port C bit 5 / SPI data out |
| 핀 16 | RC6/TX/CK — Port C bit 6 / UART TX / clock |
| 핀 17 | RC7/RX/DT — Port C bit 7 / UART RX / data |
| 핀 18 | RD0 — Port D bit 0 |
| 핀 19 | RD1 — Port D bit 1 |
| 핀 20 | RD2 — Port D bit 2 |
| 핀 21 | RD3 — Port D bit 3 |
| 핀 22 | RD4 — Port D bit 4 |
| 핀 23 | RD5 — Port D bit 5 |
| 핀 24 | RD6 — Port D bit 6 |
| 핀 25 | RD7 — Port D bit 7 |
| 핀 26 | RE0/RD — Port E bit 0 / read control |
| 핀 27 | RE1/WR — Port E bit 1 / write control |
| 핀 28 | RE2/CS — Port E bit 2 / chip select |
| 핀 29 | VSS — Ground reference |
| 핀 30 | VDD — Positive supply voltage |
| 핀 31 | RB0/INT — Port B bit 0 / external interrupt |
| 핀 32 | RB1 — Port B bit 1 |
| 핀 33 | RB2 — Port B bit 2 |
| 핀 34 | RB3 — Port B bit 3 |
| 핀 35 | RB4 — Port B bit 4 |
| 핀 36 | RB5 — Port B bit 5 |
| 핀 37 | RB6/PGC — Port B bit 6 / ICSP clock |
| 핀 38 | RB7/PGD — Port B bit 7 / ICSP data |
| 핀 39 | NC — Not connected (per datasheet) |
| 핀 40 | NC — Not connected (per datasheet) |
일반적인 애플리케이션
PIC16C662-04E/P 적합 용도: 6 애플리케이션s: Automotive Body Control Modules, Industrial Automation Controllers, Appliance Control Boards, Consumer Electronics Interface Panels, HVAC and Climate Control, Security and Access Control Panels.
Automotive Body Control Modules
The PIC16C662-04E/P's extended -40 C to +125 C temperature grade and automotive qualification make it well suited to body-electronics ECUs that drive mirrors, locks, and lighting. With 33 digital I/O, the MCU can scan keypads, multiplex LEDs, and read switches directly, while the on-chip WDT and Brown-out Reset handle the noisy 12 V automotive environment. The 200 ns instruction cycle supports debounce and PWM tasks in real time. Place 0.1 uF decoupling close to VDD/VSS and use optocouplers for any 12 V load switching.
추천
Industrial Automation Controllers
In industrial PLCs and sensor-interface boards, the PIC16C662-04E/P provides 33 I/O lines that can drive relays, read limit switches, and interface 4-20 mA loops through external conditioning. The OTP memory locks firmware to prevent unauthorized field modification, while the RISC core executes deterministic scan loops within microseconds. Brown-out detection protects against the voltage sags common on long factory wiring runs. Use the CCP and SSP peripherals for PWM valve control and SPI sensor polling respectively.
추천
Appliance Control Boards
White-goods control boards (washers, dishwashers, ovens) benefit from the PIC16C662-04E/P's integrated LED drive, 33 I/O, and timer/counter peripherals that handle motor triac drive, user-panel scanning, and temperature sensor polling. The 4 MHz clock keeps EMI low compared to faster MCUs, simplifying CE/UL compliance. The 5 V supply envelope matches common appliance power rails. OTP memory prevents firmware tampering and ensures field units ship with locked behavior.
추천
Consumer Electronics Interface Panels
User-interface panels for AV receivers, HVAC thermostats, and home automation gateways use the PIC16C662-04E/P to scan keypads, drive 7-segment or matrix LED displays, and bridge to a host processor via UART or SPI. The PIC's 35-instruction RISC core is easy to program in assembly or C, accelerating time-to-market for cost-sensitive consumer products. The 33 I/O accommodate 4x4 keypads plus dedicated LED sink lines without external drivers.
추천
HVAC and Climate Control
The PIC16C662-04E/P's extended temperature grade suits HVAC controllers exposed to attic and outdoor-cabinet conditions. The MCU can multiplex temperature inputs from NTC thermistors, drive triac-based fan speed control via PWM (CCP module), and communicate with indoor units over UART. OTP memory locks calibrated firmware and protects against unauthorized reflash. Brown-out Reset is essential for handling compressor inrush that sags the supply rail.
추천
Security and Access Control Panels
Door controllers, alarm panels, and access-control keypads use the PIC16C662-04E/P to scan keypads, drive buzzers and LEDs, and supervise reed-switch zones. The WDT catches firmware lockups, while OTP memory ensures the security logic cannot be reflashed in the field. The 4 MHz clock gives 5 ms instruction loops that comfortably debounce mechanical keypresses without missing events. Use external EEPROM or serial FRAM for event-log persistence.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC16C662-04E/P — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC16C662-04I/P | PIC16F662-I/P | PIC16F74-I/P | PIC16C662-10E/P | PIC16F884-E/P |
|---|---|---|---|---|---|---|
| Package | 40-PDIP | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Max Clock Frequency | 4 MHz | 4 MHz | 20 MHz | 20 MHz | 10 MHz | 20 MHz |
| Program Memory | 7 KB OTP | 7 KB OTP | 7 KB Flash | 4 KB Flash | 7 KB OTP | 7 KB Flash |
| Memory Type | OTP | OTP | Flash | Flash | OTP | Flash |
| Temperature Grade | -40 to +125 C (Extended) | -40 to +85 C (Industrial) | -40 to +85 C (Industrial) | -40 to +85 C (Industrial) | -40 to +125 C (Extended) | -40 to +125 C (Extended) |
| Number of I/O Pins | 33 | 33 | 33 | 33 | 33 | 36 |
| Supply Voltage | 4.0 to 6.0 V | 4.0 to 6.0 V | 2.0 to 5.5 V | 2.0 to 5.5 V | 4.0 to 6.0 V | 2.0 to 5.5 V |
| Brown-out Reset | Yes | Yes | Yes | Yes | Yes | Yes |
| Watchdog Timer | Yes | Yes | Yes | Yes | Yes | Yes |
주요 차별점
- Extended automotive temperature grade in standard SKU (vs PIC16C662-04I/P)
- 7 KB OTP program memory with 33 I/O at 4 MHz clock grade (vs PIC16F74-I/P)
- Same-brand drop-in availability across OTP and Flash variants (vs PIC16F884-E/P)
설계 노트
Place a 0.1 uF ceramic decoupling capacitor within 5 mm of the VDD pin (pin 30) and a bulk 10 uF electrolytic near the IC. The PIC16C662-04E/P can source/sink up to 25 mA per pin, but the total port current is limited; avoid tying multiple LEDs to the same VDD rail without current-limiting resistors. Route the MCLR line directly to the reset circuit with a 10 kohm pull-up to VDD.
Estimated: at 4 MHz clock and VDD = 5.0 V, supply current is typically 2-5 mA with all I/O floating. Adding LED loads at 10 mA total and analog peripherals active can push this to ~15 mA. The extended temperature grade means derate supply current at +125 C by ~20 percent. Always enable Brown-out Reset to protect Flash/OTP integrity during voltage sags.
Do not leave unused I/O pins floating - configure them as outputs or enable the internal weak pull-ups to prevent shoot-through and spurious interrupts. The MCLR pin must NOT be left floating; tie through a resistor to VDD. When programming OTP, ensure VPP rises monotonically to 13 V within the datasheet-specified rise time, or the programming cycle will fail silently and leave the part unprogrammed.
규정 준수 정보
RoHS and REACH status not explicitly stated in provided data. Lead-free assumed for PDIP package family. AEC-Q100 not separately qualified - extended temp grade "/E" suffix is automotive-style but not formal AEC-Q100.
