PIC16F722-I/MV - 8-Bit 3.5KB Flash MCU | Microchip Technology
부품 번호: PIC16F722-I/MV ✓ 활성PIC16F722-I/MV 개요
A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, and peripherals on one device. The PIC16F722 belongs to the PIC16 family, a hierarchy of 8-bit RISC microcontrollers within the broader embedded semiconductor and embedded-control market. Its combination of Flash memory, nanoWatt XLP technology, and a compact surface-mount package supports applications requiring low standby power, rapid deployment, and minimal external component count.
Key device characteristics include 3.5 KB of program Flash, 128 bytes of RAM, one 10-bit ADC, and operation from 1.8 V to 5.5 V. The device also integrates an internal low-dropout regulator with VCAP stabilization pins, allowing the internal core voltage to remain regulated across changing external supply conditions. The manufacturer identifies the PIC16F722 as a versatile 28-pin MCU designed around Extreme Low Power nanoWatt XLP technology.
The PIC16 architecture provides a compact, deterministic control platform suitable for embedded products requiring modest computation rather than high-performance application processing. Its 28-pin UQFN footprint supports dense PCB layouts, while the exposed-pad construction assists heat transfer when appropriate PCB copper is provided. Designers should use the manufacturer pin-description and package drawings when assigning tracks because the exposed pad, power pins, and VCAP pins have specific electrical and layout requirements.
Typical uses include low-power sensor nodes, compact industrial controls, appliance interfaces, battery-powered accessories, and embedded monitoring modules. The 1.8 V minimum operating voltage supports energy-conscious designs, while the single ADC allows basic analog measurement. Firmware size should remain within the 3.5 KB Flash constraint, and RAM-intensive buffering should be avoided because the device provides only 128 bytes of data memory.
Design around the complete pin-assignment table rather than only the power and I/O functions. Place the required VCAP capacitor close to its designated pin, provide appropriate decoupling across the supply pins, and route the exposed pad according to the package land pattern. Confirm that the board's analog and digital grounding strategy limits ADC noise and that the operating temperature remains within the selected device grade.
This product page combines the manufacturer family information with package-level details, sourcing guidance, compatible same-family alternatives, and practical design considerations. It is intended to help engineers establish whether the 28-pin PIC16F722-I/MV matches a low-power embedded-control design before committing the MCU to firmware and PCB development.
드롭인 대체품: PIC16F722-I/MV — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC16F722-I/MV (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Timers, Operating Temperature, I/O Pins.
PIC16F722T-I/MV
✅ 드롭인가격 문의
데이터시트 보기 →PIC16F722AT-I/MV
✅ 드롭인가격 문의
데이터시트 보기 →PIC16F722A-I/MV
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC16F722-E/MV
✅ 드롭인가격 문의
데이터시트 보기 →PIC16F723A-E/MV
✅ 드롭인가격 문의
데이터시트 보기 →PIC16F722-I/MV 최대 정격 & 전기적 특성
| Product Type | 8-bit RISC microcontroller |
| Architecture | PIC16 |
| Program Memory | 3.5 KB Flash |
| RAM | 128 bytes |
| Operating Voltage | 1.8 V to 5.5 V |
| ADC | 1 ADC |
| 패키지 | 28-pin UQFN with exposed pad |
| 실장 유형 | Surface mount |
| Power Dissipation | 800 mW |
| Internal Core Regulator | Low-dropout regulator with VCAP stabilization |
| Low-Power Technology | nanoWatt XLP technology |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
PIC16F722-I/MV 28-pin uqfn with exposed pad 핀 구성 가이드
PIC16F722-I/MV(28-pin uqfn with exposed pad 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC16F722-I/MV.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC16F722-I/MV 적합 용도: 6 애플리케이션s: Low-Power Sensor Node, Industrial Control Module, Appliance User Interface, Battery-Powered Accessory, Compact Data Logger, Environmental Monitoring.
Low-Power Sensor Node
The PIC16F722-I/MV fits compact battery-powered sensor nodes where a 1.8 V to 5.5 V operating range and nanoWatt XLP technology are important. Its one ADC can acquire a basic analog sensor signal, while 128 bytes of RAM supports short acquisition and filtering cycles rather than large data buffers. A practical design can wake periodically, read the sensor, perform compact control calculations, and transmit the result before returning to a low-power state. The 3.5 KB Flash limit requires disciplined firmware sizing, and the exposed pad should be connected according to the manufacturer package drawing.
추천
Industrial Control Module
The PIC16F722-I/MV is suitable for a small industrial control module that monitors discrete inputs, operates a relay or actuator, and communicates status through a serial interface. The 8-bit PIC16 RISC core and 3.5 KB of Flash are appropriate for deterministic supervisory logic, while the 28-pin UQFN package preserves board area in compact equipment. Industrial designs should pay particular attention to the ADC reference, input protection, grounding, and firmware debounce behavior. Because the device has only 128 bytes of RAM, processing should be structured to avoid large buffers and deep call chains.
추천
Appliance User Interface
PIC16F722-I/MV can manage a small appliance interface containing buttons, indicators, and one analog control or sensing channel. Its 3.5 KB of Flash supports compact state-machine firmware, and its 28-pin UQFN package leaves board area for power conversion, communication, and protection components. Button scanning should use a timer-driven debounce routine rather than blocking delays, while the ADC can support a potentiometer or simple sensor input. The 1.8 V minimum operating voltage also allows the MCU to operate from low-voltage derived rails when the rest of the interface supports them.
추천
Battery-Powered Accessory
The PIC16F722-I/MV is well suited to a battery-powered accessory that requires periodic sensing, simple logic, and low standby consumption. The 1.8 V to 5.5 V operating range provides flexibility across single-cell-derived and regulated low-voltage systems, while nanoWatt XLP technology provides the basis for duty-cycled operation. Its one ADC is sufficient for a basic analog measurement, and 128 bytes of RAM is adequate for small state machines that do not retain large histories. Battery-life calculations should use the family datasheet's sleep-mode and active-current values under the exact voltage, temperature, and peripheral conditions of the product.
추천
Compact Data Logger
A small PIC16F722-I/MV data logger can sample one analog channel and retain a limited sequence of measurements before forwarding them through a serial interface. The 3.5 KB Flash stores firmware, while 128 bytes of RAM constrains how many samples can be buffered at once, making streaming and circular-buffer designs preferable to large local histories. Firmware should minimize RAM usage and use efficient serial transmission to avoid prolonged active periods. For production designs, the ADC input, reference arrangement, and grounding should be evaluated together because the single converter and limited memory simplify the architecture but increase the importance of disciplined data flow.
추천
Environmental Monitoring
The PIC16F722-I/MV can serve as the controller in a compact environmental monitoring product that periodically reads a simple analog sensor and reports status. The 1.8 V minimum supply voltage supports low-power designs, and the 28-pin UQFN footprint makes the controller suitable for densely assembled remote nodes. One ADC channel limits the number of simultaneous analog measurements, so additional sensors may require multiplexing or a separate converter. The internal core regulator and external VCAP capacitor support stable operation, while the exposed pad and grounding layout should follow the manufacturer's package recommendations to minimize thermal gradients and analog noise.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC16F722-I/MV — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC16F722T-I/MV | PIC16F722AT-I/MV | PIC16F722A-I/MV | PIC16F722-E/MV | PIC16F723A-E/MV |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin UQFN with exposed pad | 28-pin UQFN with exposed pad | 28-pin UQFN with exposed pad | 28-pin UQFN with exposed pad | 28-pin UQFN with exposed pad | 28-pin UQFN with exposed pad |
| Microcontroller Architecture | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC |
| Special Ordering Feature | -I industrial-temperature ordering option | -T shipping-format suffix | -AT family and shipping-format suffixes | -A family revision suffix | -E temperature-grade suffix | -A family revision and -E temperature-grade suffixes |
주요 차별점
- Direct same-footprint assembly option (vs PIC16F722T-I/MV)
- Same-family revision path without changing the footprint (vs PIC16F722A-I/MV)
- Multiple temperature-grade and family options on one land pattern (vs PIC16F723A-E/MV)
설계 노트
Implement the 28-pin UQFN footprint from the manufacturer package drawing, including the exposed pad and its thermal-via recommendations. Keep the required VCAP capacitor close to its assigned pin so the internal low-dropout regulator remains stable. Place supply decoupling at the power pins and maintain a continuous return path beneath the device. A generic 28-pin QFN footprint should not be assumed because pad dimensions, pin numbering, and exposed-pad geometry must match the exact package.
Estimate the device power budget using the selected operating voltage, active current, sleep current, and external load rather than assuming the regulator's efficiency. The listed 800 mW power-dissipation figure is a device limit, not a recommended operating point. Keep the calculated internal dissipation comfortably below that limit at the highest ambient temperature. For battery systems, calculate average current from duty cycle and include leakage, ADC operation, and peripheral activity in the energy budget.
Treat the single ADC input as a sensitive analog node and route it away from switching nodes and high-current return paths. Use a defined reference arrangement, local return current, and input filtering appropriate to the source impedance. Because the device offers only 128 bytes of RAM, avoid long acquisition buffers; sample, convert, and process the signal incrementally. Validate ADC settling, reference stability, and acquisition timing in hardware rather than relying on nominal processing speed.
Do not substitute a -T, -A, or -E ordering variant without reviewing the ordering table, temperature grade, package dimensions, and firmware assumptions. The 3.5 KB Flash limit and 128-byte RAM limit can cause toolchain, stack, and buffer problems before they become visible in basic functional tests. Build firmware with worst-case RAM usage enabled, and verify VCAP stability, brownout behavior, reset behavior, and exposed-pad soldering on representative boards before production release.
규정 준수 정보
Compliance attributes were not stated in the cited product information. The -I ordering suffix identifies an industrial-temperature device but does not by itself establish AEC-Q100 qualification.