Microchip Technology

PIC16LF1708-E/SO - 8-bit MCU, 4KB Flash, 512B RAM, SOIC-20 | Microchip

부품 번호: PIC16LF1708-E/SO ✓ 활성
재고 있음 영업일 기준 1~3일 내 발송
1.8 V to 3.6 V Vdss SOIC-20 (SO) 7.50 mm Package 32 MHz (16 MIPS) Speed 4 KB Memory
시작가 $0.47 USD / 개
MOQ: 1 |
가격 업데이트: 2026-09-23
볼륨 가격
수량 단가 합계
1 $0.62 $0.62
10 $0.59 $5.90
100 $0.55 $55.00
500 $0.51 $255.00
1,000 $0.47 $470.00
ℹ️ 모든 가격은 USD 기준입니다

PIC16LF1708-E/SO 개요

The Microchip Technology PIC16LF1708-E/SO is an 8-bit flash microcontroller in the PIC16F170x/171x family, integrating Intelligent Analog peripherals with eXtreme Low Power (XLP) technology. Housed in a 20-pin SOIC (SO) package, the device provides 4 KB of Flash program memory, 512 bytes of RAM, and operates from a 1.8 V to 3.6 V supply. Its 32 MHz internal oscillator and 16 MIPS core deliver responsive performance for cost-sensitive general-purpose designs.

A microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals such as timers, ADC, communication interfaces, and I/O pins. In the system hierarchy, an MCU belongs to the embedded computing layer that sits above simple logic ICs and below more complex microprocessors. The PIC16LF1708 falls within the 8-bit RISC MCU category, characterized by a streamlined instruction set that simplifies firmware development while keeping silicon cost low.

Key features include on-chip op amps, Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Complementary Output Generator (COG), and Zero-Cross Detect (ZCD), as well as a 10-bit ADC with computation, a 5-/8-bit DAC, and high-speed comparators. The XLP architecture achieves nanoWatt sleep currents below 100 nA, making the device well suited for battery-powered sensors and IoT nodes. Multiple communication interfaces support UART, SPI, and I2C for flexible peripheral expansion.

From an architectural perspective, the PIC16LF1708 uses a Harvard RISC core with a 14-bit instruction word and a separate 8-bit data path, providing deterministic interrupt latency and predictable timing. Internal voltage reference, hardware limiting on the ADC, and PWM modules with dead-band control reduce external component count and PCB area in motor control, lighting, and power-conversion applications.

Typical applications include low-power IoT sensor nodes, consumer electronics remote controls, battery management for handheld instruments, LED lighting drivers, and small motor or fan control loops. The SOIC-20 footprint simplifies hand prototyping and rework in development labs.

When designing with this device, ensure VDD decoupling is placed within 5 mm of the package, and that MCLR is pulled high through a resistor for normal operation. Pair the part with MPLAB X IDE and XC8 compiler to leverage the full peripheral library.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not aggregated on a single manufacturer or distributor datasheet page.

드롭인 대체품: PIC16LF1708-E/SO — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PIC16LF1708-E/SO (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Core Architecture, Operating Temperature, Comparators.

Microchip Technology
Package: 20-SOIC (7.50 mm body)
ADC: 10-bit, 8 channels
Operating Temperature: -40 °C to +125 °C (E, industrial)
Microchip Technology
Package: 20-pin SOIC (SO), narrow body
ADC: 12 channels, 10-bit
Core Architecture: PIC16 (Enhanced Mid-Range 8-bit RISC)
Microchip Technology
Package: 20-SOIC (7.50 mm width, 0.295")
ADC: 10-bit, up to 17 channels
Core Architecture: 8-bit PIC
Microchip Technology
Package: 20-pin SSOP (5.30 mm body width, 0.65 mm pitch)
ADC: 10-bit, up to 17 channels
Core Architecture: PIC16 enhanced mid-range x14 (Harvard RISC)
Microchip Technology
Package: 20-SOIC (0.295" / 7.50 mm body width)
ADC: 10-bit, multiple channels (peripherally shared via PPS)
Core Architecture: 8-bit PIC MCU (enhanced mid-range, 14-bit instruction word)

빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:

PIC16LF1708-I/SO

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 SOIC-20 (SO)
8-bit PIC MCU (enhanced mid-range, 14-bit instruction word) · PIC® XLP™ 16F, PIC16F170x/171x series · 7 KB (4K x 14 words) · 512 bytes · 32 MHz · 1.8 V to 3.6 V · -40 °C to +85 °C (Industrial)

✓ 재고 있음

$1.05 / 개

데이터시트 보기 →

PIC16LF1708-E/P

✅ 드롭인 ⚠️ 사양 미검증
📦 SOIC-20 (SO)
same die in PDIP-20 package vs SOIC-20, requires PCB redesign for through-hole footprint

📋 참조 대체품 (카탈로그에 없음)

PIC16LF1708-E/SS

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 SOIC-20 (SO)
PIC16F170x (Mid-range 8-bit, XLP) · PIC16 enhanced mid-range x14 (Harvard RISC) · 7 KB (4K x 14 words) · 512 B · 256 B · 32 MHz · 200 ns (at 20 MHz FOSC) · 1.8 V to 3.6 V

✓ 재고 있음

$1.65 / 개

데이터시트 보기 →

PIC16F1708-E/SO

✅ 드롭인
Microchip Technology
📦 SOIC-20 (SO)
PIC 8-bit enhanced mid-range · 8-bit · 32 MHz · 200 ns · 7 KB (4K × 14) Flash · FLASH · 512 bytes · 256 bytes

✓ 재고 있음

$1.18 / 개

데이터시트 보기 →

PIC16LF1707T-I/SO

✅ 드롭인
Microchip Technology
📦 SOIC-20 (SO)
PIC® XLP™ 16F · 8-bit PIC · 3.5 KB (2K x 14) Flash · 256 B · None · 32 MHz · 1.8 V to 3.6 V · 10-bit, up to 17 channels

✓ 재고 있음

$0.49 / 개

데이터시트 보기 →

PIC16LF1507-E/SO

✅ 드롭인
Microchip Technology
📦 SOIC-20 (SO)
Microchip Technology · PIC16F150x · PIC16 (Enhanced Mid-Range 8-bit RISC) · 14-bit · 49 · 20 MHz · 3.5 KB (2K x 14 words) · 128 bytes

✓ 재고 있음

$0.55 / 개

데이터시트 보기 →

PIC16LF1708-E/SO 최대 정격 & 전기적 특성

Core Architecture 8-bit RISC Harvard (PIC)
Program Memory (Flash) 4 KB
Data Memory (RAM) 512 B
Maximum CPU Speed 32 MHz (16 MIPS)
Supply Voltage (VDD) 1.8 V to 3.6 V
동작 온도 -40 C to +125 C
I/O Pins 18
ADC 10-bit, up to 12 channels
DAC 5-/8-bit, 1 channel
Comparators 2 (high-speed)
Op Amps 2 on-chip
Timers 8-/16-bit (multiple)
Communication Interfaces UART, SPI, I2C
Core Independent Peripherals CLC, COG, ZCD, NCO
패키지 SOIC-20 (SO) 7.50 mm
실장 유형 Surface Mount
MSL 레벨 1
RoHS 상태 Compliant

PIC16LF1708-E/SO 핀 구성

SOIC-20 Package Pinout Diagram SOIC-20W 20-pin, 7.5x12.8mm, P1.27mm, JEDEC MS-013. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 SOIC-20
핀 1 RA3/AN3/VREF+ — Analog input 3 / positive voltage reference / GPIO
핀 2 RA4/AN4 — Analog input 4 / GPIO
핀 3 RA5/AN5 — Analog input 5 / GPIO
핀 4 RA6/OSC2 — GPIO / crystal oscillator output
핀 5 RA7/OSC1 — GPIO / crystal oscillator input
핀 6 VSS — Ground reference
핀 7 RA0/AN0 — Analog input 0 / GPIO
핀 8 RA1/AN1 — Analog input 1 / GPIO
핀 9 RA2/AN2 — Analog input 2 / GPIO
핀 10 RC0 — GPIO / PWM output
핀 11 RC1 — GPIO / PWM output
핀 12 RC2 — GPIO / PWM output
핀 13 RC3 — GPIO / PWM output
핀 14 RC4 — GPIO / I2C/SPI
핀 15 RC5 — GPIO / I2C/SPI
핀 16 RC6 — GPIO / UART TX
핀 17 RC7 — GPIO / UART RX
핀 18 VDD — Positive supply voltage
핀 19 VSS — Ground reference
핀 20 MCLR/VPP — Master clear reset / programming voltage

일반적인 애플리케이션

PIC16LF1708-E/SO 적합 용도: 6 애플리케이션s: Battery-Powered IoT Sensor Nodes, Consumer Remote Controls, LED Lighting Drivers, Small Motor and Fan Control, Handheld Instruments and Metering, Industrial Control Modules.

🧩

Battery-Powered IoT Sensor Nodes

The PIC16LF1708-E/SO is well matched to battery-powered IoT sensor nodes thanks to its nanoWatt XLP sleep currents below 100 nA, wide 1.8 V to 3.6 V supply range, and on-chip 10-bit ADC. Engineers typically run the core at 32 MHz only during a sensor read, then enter sleep to extend coin-cell life to multiple years. The integrated op amps and comparators eliminate the need for external signal conditioning on thermistor, photodiode, or gas-sensor front ends, reducing BOM and PCB footprint in wireless sensor designs.

📱

Consumer Remote Controls

For IR or RF remote controls, the PIC16LF1708-E/SO combines low-cost 4 KB Flash, deep-sleep currents under 100 nA, and flexible PWM peripherals for IR carrier generation. The 18 I/O pins are sufficient for keypad matrix scanning up to 8x8 and LED indicators. XLP sleep between button events keeps total quiescent draw in the microampere range, allowing alkaline AAA operation for the lifetime of the device without user-replaceable batteries.

💡

LED Lighting Drivers

The PIC16LF1708-E/SO is an excellent fit for small LED lighting drivers due to its 5-/8-bit DAC, multiple PWM channels with dead-band control, and integrated op amps for current sensing. Engineers use the CLC and COG Core Independent Peripherals to drive MOSFET half-bridges without CPU intervention, reducing firmware overhead and improving dimming accuracy. The 1.8 V to 3.6 V supply range accepts direct Li-Ion or two-AA inputs for portable fixtures.

🏭

Small Motor and Fan Control

Brushless DC fan and small motor control loops benefit from the PIC16LF1708-E/SO's high-speed comparators, configurable CLC, and Complementary Output Generator (COG) peripherals. The 32 MHz core runs sensorless back-EMF zero-cross detection firmware in real time, while on-chip op amps condition the phase feedback without external amplifiers. Hardware dead-band control prevents shoot-through on the half-bridge, improving efficiency and EMI in compact motor designs.

🔧

Handheld Instruments and Metering

Handheld multimeters, clamp meters, and portable environmental testers leverage the PIC16LF1708-E/SO's combination of low power, integrated ADC, op amps, and -40 C to +125 C extended temperature range. The 10-bit ADC with computation performs oversampling and averaging in hardware, offloading the CPU for faster display updates. With XLP sleep below 100 nA, the device contributes negligibly to standby drain between measurements.

🏭

Industrial Control Modules

Industrial PLC expansion modules, sensor interface boards, and process-control front ends use the PIC16LF1708-E/SO to provide UART/SPI/I2C bridges to higher-level controllers. The extended -40 C to +125 C temperature range supports cabinet-mounted deployment, and the Core Independent Peripherals handle timing-critical tasks in hardware, freeing the CPU for protocol stacks. The SOIC-20 footprint simplifies optical-inspection-based manufacturing for high-volume industrial products.

What is the program memory size of PIC16LF1708-E/SO?
The PIC16LF1708-E/SO contains 4 KB of Flash program memory, 512 bytes of data RAM, and a separate data EEPROM region. According to the Microchip PIC16F1704/1708 datasheet, the 4 KB Flash provides space for approximately 2,000 to 4,000 instructions, depending on call/jump density, which suits cost-sensitive applications such as sensor nodes and small consumer devices.
What is the operating voltage range of PIC16LF1708-E/SO?
The PIC16LF1708-E/SO operates from 1.8 V to 3.6 V across the -40 C to +125 C industrial temperature range. According to the Microchip datasheet, the 'LF' prefix denotes the lower-voltage variant optimized for battery-powered designs; at 3.3 V typical operation, the device draws nanoWatt XLP sleep currents, making it a fit for coin-cell and energy-harvesting applications.
Does PIC16LF1708-E/SO support low-power sleep modes?
Yes, the PIC16LF1708-E/SO supports multiple XLP (eXtreme Low Power) sleep modes with currents below 100 nA typical in deep sleep with peripherals disabled. According to the Microchip datasheet, the device retains RAM in sleep and offers a Real-Time Clock calendar mode drawing only a few microamperes, which suits battery-powered metering and IoT endpoints.
What peripherals are integrated in PIC16LF1708-E/SO?
The PIC16LF1708-E/SO integrates two op amps, two high-speed comparators, a 10-bit ADC with computation, a 5-/8-bit DAC, and Core Independent Peripherals (CLC, COG, NCO, ZCD). According to the Microchip datasheet, this analog-rich integration reduces external component count for sensor signal conditioning, lighting control, and small motor drive loops.
Where to download PIC16LF1708-E/SO datasheet PDF?
The official PIC16LF1708-E/SO datasheet is published by Microchip as the PIC16F1704/1708 family datasheet and can be downloaded from the Microchip product page or the ww1.microchip.com document server. According to the manufacturer link, searching 'PIC16F1708 datasheet' on microchip.com returns the latest revision with electrical characteristics, pinout, and peripheral details.
Where to find the PIC16LF1708-E/SO pinout for SOIC-20?
The PIC16LF1708-E/SO pinout is documented in the Microchip PIC16F1704/1708 family datasheet. According to the manufacturer page, the SOIC-20 package assigns VDD, VSS, MCLR, and up to 18 I/O pins with alternate peripheral functions; an interactive pinout diagram is also available on the Microchip MPLAB X IDE device database.
What is the price of PIC16LF1708-E/SO?
The PIC16LF1708-E/SO lists at approximately $0.62 per unit at qty 1, dropping to roughly $0.47 at qty 1000 as of 2026-09-23. According to DigiKey distributor listings, volume pricing below $0.50 is achievable at higher breaks; LCSC also offers the part at a competitive tier, useful for hobby and low-volume production.
Is PIC16LF1708-E/SO in stock at major distributors?
Yes, the PIC16LF1708-E/SO is reported in stock at DigiKey, LCSC, and Microchip Direct as of 2026-09-23. According to the verified distributor listings, Microchip Direct is the most reliable source for production volumes, while LCSC and DigiKey offer tape-and-reel cut-pack options for prototyping.
What is the lead time for PIC16LF1708-E/SO?
The PIC16LF1708-E/SO lead time is typically 8 to 12 weeks from Microchip factory as of 2026-09-23. According to distributor inventory data, channel stock at DigiKey and LCSC can shorten delivery for small orders, but high-volume production should place orders through Microchip Direct to secure allocation.
PIC16LF1708-E/SO vs PIC16LF1709-E/SO - which is better for analog applications?
The PIC16LF1708-E/SO and PIC16LF1709-E/SO share the same SOIC-20 footprint and XLP architecture, but the 1709 adds more program memory and additional peripherals. According to the Microchip family datasheet, the 1708 is the right choice for low-cost 4 KB Flash designs, while the 1709 is preferred when firmware growth and richer analog blocks are needed.
What is the best drop-in replacement for PIC16LF1708-E/SO?
The best drop-in replacement for PIC16LF1708-E/SO is PIC16LF1708-I/SO in the same SOIC-20 footprint, sharing identical peripheral set and pinout. According to the Microchip family datasheet, the only difference is the operating temperature grade (I vs E); the E suffix covers -40 C to +125 C, while I covers the industrial range. Verify with your contract manufacturer that the I-grade meets your environmental requirements before substituting.
Is PIC16LF1708-E/SO suitable for battery-powered IoT sensor nodes?
Yes, the PIC16LF1708-E/SO is highly suitable for battery-powered IoT sensor nodes due to its XLP nanoWatt sleep currents and wide 1.8 V to 3.6 V supply range. According to the Microchip datasheet, the device wakes from sleep in microseconds and retains RAM without brown-out reset, supporting years of operation on coin cells when firmware is optimized.
When should I choose PIC16LF1708-E/SO over PIC16F1708-I/SO?
Choose the PIC16LF1708-E/SO when you need guaranteed operation across the -40 C to +125 C automotive-style temperature envelope, particularly for outdoor or industrial sensor applications. According to Microchip part-numbering conventions, the 'LF' prefix denotes the lower-voltage variant, while 'E' specifies the extended temperature grade; the I-grade suffices for indoor commercial designs.
Can PIC16F1708 replace PIC16LF1708 in a 3.3 V design?
Yes, the PIC16F1708 in the same SOIC-20 package can functionally replace the PIC16LF1708 in designs operating from 2.3 V to 3.6 V. According to the Microchip family datasheet, the PIC16F version supports a wider 1.8 V to 5.5 V range but draws slightly higher active current; verify that your brown-out and voltage-monitor thresholds are compatible with the higher minimum voltage of the F-variant.
What are the key specifications of PIC16LF1708-E/SO that engineers should know?
The PIC16LF1708-E/SO is an 8-bit PIC16 RISC microcontroller with 4 KB Flash, 512 B RAM, 32 MHz core, 1.8-3.6 V supply, 18 I/O, 10-bit ADC, op amps, comparators, DAC, and XLP sleep below 100 nA in SOIC-20. According to the Microchip family datasheet, this combination delivers cost-optimized analog integration for IoT and consumer products.

엔지니어링 참조 데이터: PIC16LF1708-E/SO — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the PIC16LF1708-E/SO when you need a low-cost 8-bit MCU with on-chip op amps, Core Independent Peripherals, and a -40 C to +125 C extended temperature range in the SOIC-20 footprint. Pick the PIC16LF1708-I/SO if your product only needs the -40 C to +85 C industrial range, since the I-grade variant is generally cheaper. Pick the PIC16F1708-E/SO when your supply rail can rise above 3.6 V (up to 5.5 V). For cost-optimized designs that can drop to 2 KB Flash and fewer peripherals, choose PIC16LF1707T-I/SO; for minimal analog needs, PIC16LF1507-E/SO is even lower cost. All variants share the SOIC-20 footprint for layout reuse.

대체품과의 비교

파라미터 이 제품 PIC16LF1708-I/SO PIC16F1708-E/SO PIC16LF1707T-I/SO PIC16LF1507-E/SO
Package SOIC-20 (SO) SOIC-20 (SO) - same SOIC-20 (SO) - same SOIC-20 (SO) - same SOIC-20 (SO) - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Program Memory (Flash) 4 KB 4 KB 4 KB 2 KB 1.75 KB
Data Memory (RAM) 512 B 512 B 512 B 256 B 128 B
Supply Voltage 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 5.5 V 1.8 V to 3.6 V 1.8 V to 3.6 V
Maximum CPU Speed 32 MHz / 16 MIPS 32 MHz / 16 MIPS 32 MHz / 16 MIPS 32 MHz / 16 MIPS 20 MHz / 10 MIPS
Operating Temperature -40 C to +125 C -40 C to +85 C -40 C to +125 C -40 C to +85 C -40 C to +125 C
Op Amps 2 2 2 1 0
DAC 5-/8-bit 5-/8-bit 5-/8-bit 5-bit 5-bit

주요 차별점

  • 2 on-chip op amps reduce external analog BOM (vs PIC16LF1507-E/SO)
  • Core Independent Peripherals (CLC, COG, NCO) offload timing-critical tasks (vs PIC16LF1707T-I/SO)
  • 10-bit ADC with computation oversamples in hardware (vs PIC16LF1507-E/SO)

설계 노트

Estimated: at 32 MHz active and 3.3 V VDD, the PIC16LF1708-E/SO core draws roughly 4 to 6 mA. Decoupling requires a 100 nF X7R placed within 5 mm of VDD (pin 18) and a 10 uF bulk capacitor on the same rail. For battery designs, enable the on-chip voltage regulator's low-power mode and route all unused I/O as outputs driving low to minimize supply toggling current.

Place the 20 MHz crystal (or resonator) within 5 mm of OSC1/OSC2 (pins 5/4) and guard the traces with a ground pour to reduce EMI pickup. Keep the MCLR pull-up resistor (typically 10 kohm) close to pin 20 to provide a clean reset signal. SOIC-20 land pattern should use 1.27 mm pitch pads per JEDEC MS-013, with thermal reliefs on the ground pad to ease hand rework.

Do not leave the MCLR pin floating - a floating MCLR can trigger spurious resets in noisy environments. Always configure the unused I/O pins as outputs driving low rather than inputs to avoid shoot-through current on the internal ESD structures. When migrating firmware between PIC16LF1708 and PIC16F1708, verify ADC and DAC reference voltage ranges because the F-variant supports a wider VDD range that may invalidate 3.3 V assumptions.

규정 준수 정보

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Qualified
무연
Yes
무할로겐
Yes
분쟁 광물
Compliant

RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified; for automotive designs use a PIC16F1708-E/SO Q-grade variant if available.

데이터 검증일: 2026-09-23 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PIC16LF1708-E/SO PIC16LF1708-E/SO datasheet Microchip PIC16LF1708 SOIC-20 PIC16LF1708 price qty 1000 PIC16LF1708 vs PIC16F1708 PIC16LF1708 drop-in replacement SOIC-20 low power 8-bit microcontroller 4KB flash SOIC-20 PIC16LF1708 battery IoT sensor node PIC16LF1708 pinout SOIC-20 PIC16LF1708 op amp CLC COG peripherals PIC16LF1708 buy online distributor PIC16LF1708 lead time stock

관련 부품 & 용어

Microchip Technology PIC16LF1708-E/SO PIC16LF1708-I/SO PIC16F1708-E/SO PIC16LF1707T-I/SO PIC16LF1507-E/SO PIC16 8-bit microcontroller MCU PIC16F170x family RISC Harvard architecture Flash memory RAM EEPROM XLP eXtreme Low Power nanoWatt SOIC-20 ADC DAC CLC COG NCO AEC-Q100 RoHS REACH IoT sensor node LED driver MPLAB X IDE
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
합계: $0.00 USD
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기