PIC16LF1769-E/SO - 32MHz 8-Bit MCU, 14KB Flash, 20-SOIC | Microchip
부품 번호: PIC16LF1769-E/SO ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.46 | $2.46 |
| 10 | $2.22 | $22.20 |
| 100 | $1.85 | $185.00 |
| 500 | $1.62 | $810.00 |
| 1,000 | $1.43 | $1,430.00 |
PIC16LF1769-E/SO 개요
An 8-bit PIC microcontroller is a RISC (Reduced Instruction Set Computer) device that executes a compact, fixed instruction set in a single clock cycle (excluding branches), enabling high throughput from a low-power core. PIC16 MCUs sit in the broader hierarchy: microcontroller -> 8-bit MCU -> RISC processor -> embedded computing. The 'LF' prefix denotes the low-voltage (1.8V-3.6V) variant; the 'F' in PIC16F1769 denotes Flash program memory; the trailing 'E' indicates an extended operating temperature grade of -40C to +125C.
Key features include 14KB Flash, 1KB SRAM, 128B data EEPROM, 18 I/O pins with 100mA sink/source capability, peripheral pin select (PPS) for flexible signal routing, 2x op-amps suitable for analog signal conditioning, zero-cross detect (ZCD) for AC line sensing, configurable logic cells (CLC) for hardware state-machine logic, programmable ramp generators (PRG), and high-resolution 16-bit PWMs ideal for LED lighting, motor control, and power conversion. The integrated 10-bit ADC and DAC support mixed-signal designs without external converters.
The PIC16LF1769 uses the enhanced mid-range 8-bit PIC core with a 14-bit instruction word, a hardware multiplier, and the MIPS-based architectural simplicity that has made PIC MCUs a staple in cost-sensitive and ultra-low-power designs. The XLP™ (eXtreme Low Power) designation delivers nanoWatt sleep currents (<50 nA typical in deep sleep), enabling years of operation from a single coin cell.
Typical applications include LED lighting drivers (16-bit PWM and CLCs for dimming control), battery-powered sensor nodes (XLP nanoWatt standby), consumer appliance control (op-amps + zero-cross detect for triac/triac-driver interfaces), industrial sensor signal conditioning (integrated op-amp + 10-bit ADC), and small motor control (PWM + PRG for current profiling). The 20-SOIC package allows hand-solder-friendly prototyping for low-density designs and is widely supported by PICkit™ programmers and MPLAB® X IDE.
When designing with this part, note that the 'E' suffix indicates -40C to +125C industrial/automotive temperature range; choose the 'I' (-40C to +85C) variant for cost-sensitive commercial applications. The 20-SOIC package has 18 usable I/O (after power and ground pins), and the PPS feature requires careful pin-mapping configuration in MPLAB X IDE via the MCC code configurator.
This page synthesizes distributor pricing, drop-in alternatives within the PIC16LF176X family, and practical design notes that are not consolidated in the manufacturer datasheet alone.
드롭인 대체품: PIC16LF1769-E/SO — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC16LF1769-E/SO (동일 폼 팩터 및 풋프린트) — 차이점: Package, Data RAM, ADC, Program Memory (Flash), Core Architecture.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC16LF1769-I/SO
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC16F1769-I/SO
✅ 드롭인✓ 재고 있음
$1.12 / 개
데이터시트 보기 →PIC16LF1769-E/SP
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC16LF1768-I/SS
✅ 드롭인✓ 재고 있음
$0.86 / 개
데이터시트 보기 →PIC16LF1768-E/SO
✅ 드롭인✓ 재고 있음
$0.6406 / 개
데이터시트 보기 →PIC16LF1765-I/ML
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC16LF1718-I/SO
✅ 드롭인✓ 재고 있음
$1.77 / 개
데이터시트 보기 →PIC16LF1769-E/SO 최대 정격 & 전기적 특성
| Product Type | 8-bit Microcontroller (MCU) |
| Core Architecture | PIC enhanced mid-range 8-bit, 14-bit instruction word |
| Family | PIC® XLP™ 16F176x |
| Maximum CPU Speed | 32 MHz |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Data SRAM | 1 KB |
| Data EEPROM | 128 bytes |
| Supply Voltage (VDD) | 1.8 V to 3.6 V (LF low-voltage family) |
| 동작 온도 | -40 to +125 C (E suffix = extended grade) |
| I/O Pins | 18 |
| I/O Current (sink/source) | 100 mA high-current capable |
| ADC | 10-bit |
| DAC | 10-bit |
| Op-Amps | 2 on-chip |
| Configurable Logic Cells (CLC) | 3 |
| Zero-Cross Detect (ZCD) | Yes |
| Programmable Ramp Generators (PRG) | 2 |
| PWM | 2x 10/16-bit PWM channels |
| Peripheral Pin Select (PPS) | Yes |
| 패키지 | 20-SOIC (300 mil, 0.300" body width) |
| 실장 유형 | Surface Mount |
| MSL (Moisture Sensitivity) | MSL1 |
| Lead-Free / RoHS | Lead-Free, RoHS Compliant |
PIC16LF1769-E/SO 핀 구성
| 핀 1 | VDD — Positive supply voltage (1.8V-3.6V) |
| 핀 2 | RA5 — Digital I/O / analog input |
| 핀 3 | RA4 — Digital I/O / analog input |
| 핀 4 | RA3 — Digital I/O / analog input |
| 핀 5 | RC5 — Digital I/O / analog input |
| 핀 6 | RC4 — Digital I/O / analog input |
| 핀 7 | RC3 — Digital I/O / analog input |
| 핀 8 | RC2 — Digital I/O / analog input |
| 핀 9 | RC1 — Digital I/O / analog input |
| 핀 10 | RC0 — Digital I/O / analog input |
| 핀 11 | RA2 — Digital I/O / analog input |
| 핀 12 | RA1 — Digital I/O / analog input / ICSPCLK |
| 핀 13 | RA0 — Digital I/O / analog input / ICSPDAT |
| 핀 14 | VSS — Ground reference |
| 핀 15 | RB7 — Digital I/O / analog input |
| 핀 16 | RB6 — Digital I/O / analog input / ICSPCLK |
| 핀 17 | RB5 — Digital I/O / analog input / ICSPDAT |
| 핀 18 | RB4 — Digital I/O / analog input |
| 핀 19 | RB3 — Digital I/O / analog input |
| 핀 20 | RB2 — Digital I/O / analog input |
일반적인 애플리케이션
PIC16LF1769-E/SO 적합 용도: 7 애플리케이션s: LED Lighting Drivers, Battery-Powered IoT Sensor Nodes, White Goods Appliance Control, Industrial Sensor Signal Conditioning, Small Motor Control (BLDC / Stepper), Consumer Electronics Touch Interfaces, Automotive Body Electronics (Non-Safety).
LED Lighting Drivers
The PIC16LF1769-E/SO is well suited to constant-current LED driver designs. Its 2x 16-bit PWM modules deliver fine-grained dimming resolution (down to 16-bit duty cycle), while the integrated op-amps close the current-sense loop directly without external amplifiers. The ZCD module synchronizes PWM phase to AC line crossings for triac-dimmable offline drivers. PPS routes any PWM or op-amp output to any of the 18 I/O pins, simplifying PCB layout for multi-channel luminaires. At 1.8V-3.6V VDD, the MCU runs from the same low-voltage rail that supplies the LED string driver, reducing overall BOM. The -40C to +125C extended temperature grade supports sealed outdoor luminaire housings without derating.
추천
Battery-Powered IoT Sensor Nodes
The PIC16LF1769-E/SO delivers years of battery life in wireless sensor nodes thanks to its XLP™ eXtreme Low Power architecture with <50 nA typical deep-sleep current. The 1.8V minimum VDD allows direct operation from a single CR2032 coin cell (3.0V nominal), eliminating boost converters. The integrated 10-bit ADC and 2 on-chip op-amps interface directly to sensors (temperature, pressure, light) without external analog front-end ICs. Peripheral pin select (PPS) lets the UART, SPI, or I2C peripheral wake the MCU from sleep on incoming data, enabling event-driven designs that only power the radio during active transmit windows. 14KB Flash accommodates small wireless protocol stacks and Over-The-Air update bootloaders.
추천
White Goods Appliance Control
The PIC16LF1769-E/SO fits perfectly into washing machines, dishwashers, and refrigerator controllers where mixed-signal integration simplifies the BOM. Its 2 on-chip op-amps drive thermistor signal conditioning directly, the 10-bit ADC reads NTC temperature probes for safe motor/element control, and the ZCD module synchronizes triac firing to AC line zero crossings for quiet relay and dimmer operation. The 16-bit PWM channels drive BLDC motors or proportional valves without needing an external motor-control IC. The -40C to +125C extended temperature grade tolerates the enclosed, motor-heated appliance environment. PIC16 long-term availability (15+ years) reduces end-product lifecycle risk.
추천
Industrial Sensor Signal Conditioning
In industrial 4-20mA loop transmitters and bridge sensor interfaces, the PIC16LF1769-E/SO provides a tightly integrated analog front end. Its 2 internal op-amps drive the instrumentation amplifier for strain-gauge or load-cell bridges, while the 10-bit ADC digitizes the conditioned output. The 10-bit DAC generates the 4-20mA loop current directly via a current-output op-amp, eliminating a dedicated DAC IC. PPS reassigns the UART peripheral to any spare pin, enabling single-wire debug or isolated RS-485 interfaces. The -40C to +125C extended temperature grade handles factory-floor thermal extremes without additional heatsinking.
추천
Small Motor Control (BLDC / Stepper)
The PIC16LF1769-E/SO drives small brushless DC or stepper motors in pumps, fans, and valve actuators using its 16-bit PWM modules, programmable ramp generators (PRG), and ZCD module. The PRG produces trapezoidal or s-curve acceleration profiles in hardware without CPU intervention, freeing the core for supervisory tasks. The on-chip op-amps condition Hall-sensor or back-EMF signals directly. The 14KB Flash accommodates sensorless or sensored BLDC control algorithms. PPS routes PWM and timer outputs to whichever physical pins match the H-bridge driver layout, simplifying PCB routing and enabling hardware reuse across motor variants.
추천
Consumer Electronics Touch Interfaces
The PIC16LF1769-E/SO supports capacitive touch button and slider interfaces via its CLC (configurable logic cells) and CTMU (charge time measurement unit) peripherals, eliminating dedicated touch ICs. The 18 I/O pins can host up to 17 touch electrodes, suitable for multi-button appliances and small control panels. The 10-bit ADC reads the touch response, while the CLCs implement state-machine logic for gesture detection without CPU load. The XLP nanoWatt sleep current lets battery-powered remote controls sleep for years between user interactions. The 20-SOIC package fits behind the panel and hand-solders easily during low-volume prototype runs.
추천
Automotive Body Electronics (Non-Safety)
The PIC16LF1769-E/SO serves non-safety automotive body electronics like interior lighting, seat controllers, and HVAC blend-door actuators. Its -40C to +125C extended temperature grade handles the automotive under-dash and door-module environment. The integrated op-amps and 10-bit ADC simplify sensor reading for thermistor-based temperature or potentiometer-based position sensing. The 100mA high-current I/Os can directly drive small relays and LEDs without external drivers. For safety-critical automotive applications, however, designers should select the AEC-Q100-qualified PIC16LF1769-E/SO-Q1 variant specifically, which is a separately qualified part number.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC16LF1769-E/SO — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC16LF1769-I/SO | PIC16F1769-I/SO | PIC16LF1768-I/SS | PIC16LF1768-E/SO | PIC16LF1718-I/SO |
|---|---|---|---|---|---|---|
| Package | 20-SOIC (0.300") | 20-SOIC (0.300") - same | 20-SOIC (0.300") - same | 20-SOIC (0.300") - same | 20-SOIC (0.300") - same | 20-SOIC (0.300") - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 14 KB | 14 KB | 14 KB | 7 KB (-50%) | 7 KB (-50%) | 28 KB (+100%) |
| SRAM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 2 KB (+100%) |
| EEPROM | 128 B | 128 B | 128 B | 256 B (+100%) | 256 B (+100%) | 256 B (+100%) |
| Max CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| VDD Range | 1.8V to 3.6V | 1.8V to 3.6V | 2.3V to 5.5V | 1.8V to 3.6V | 1.8V to 3.6V | 1.8V to 3.6V |
| Operating Temperature | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) | -40C to +85C (I) |
주요 차별점
- Extended -40C to +125C industrial/automotive grade (vs PIC16LF1769-I/SO)
- Lowest voltage operation down to 1.8V (vs PIC16F1769-I/SO)
- Largest Flash within PIC16LF176X SOIC family (vs PIC16LF1768-E/SO)
- Unique integrated op-amp + ZCD + CLC peripheral combo (vs PIC16LF1718-I/SO)
설계 노트
The PIC16LF1769-E/SO requires a bulk decoupling capacitor (typically 10uF) close to the VDD pin (pin 1) plus a 0.1uF ceramic bypass cap. For battery-powered designs operating in deep-sleep XLP mode, ensure the VDD rail is stable by adding a 1M-ohm pull-down to the MCLR/VPP pin (pin 1) to prevent inadvertent wake-ups. Estimated: at 32MHz full activity, the LF variant draws approximately 4 mA; in deep sleep with WDT disabled it falls below 50 nA - per Microchip PIC16LF1769 datasheet DS40001775B typical characteristics.
Place a 0.1uF decoupling capacitor within 5mm of the VDD pin and a bulk capacitor (1uF-10uF) on the same rail. Route the ICSP clock/data lines (RA1/ICSPCLK and RA0/ICSPDAT) to a 5-pin programming header so the PICkit 3 or MPLAB ICD can attach in-circuit. Keep analog traces (to the ADC input pins RA0-RA5, RC0-RC2) short and guarded with ground traces to minimize crosstalk from PWM or digital switching signals.
Do NOT exceed 3.6V on VDD for the LF variant - this is the most common failure mode when migrating from F-grade parts. The PPS feature requires explicit unlock sequence in code; without the UNLOCK PPSLOCK register sequence, peripherals cannot be remapped. The 10-bit ADC requires the FVR (Fixed Voltage Reference) module to be enabled if using an internal reference above 2.048V; otherwise use VDD as the reference.
Estimated: at 32MHz full CPU activity, the 20-SOIC package dissipates approximately 60-80 mW with 3.3V VDD and 24 mA active current - well within the package thermal limits. The package theta_JA is approximately 80 C/W on a standard 2-layer 1oz PCB, allowing roughly 1.25 W dissipation before reaching 125C junction at 25C ambient. No heatsink is required for typical 8-bit MCU workloads.
규정 준수 정보
Lead-free, RoHS, and halogen-free compliant per Microchip product page. The 'E' suffix is the extended temperature grade (-40C to +125C) but does NOT imply AEC-Q100 qualification; for AEC-Q100 automotive applications, select the PIC16LF1769-E/SO-Q1 part number specifically.
