PIC16LF1847T-I/SO - 8-bit MCU, 14KB Flash, 32MHz | Microchip
부품 번호: PIC16LF1847T-I/SO ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.84 | $2.84 |
| 10 | $2.56 | $25.60 |
| 100 | $2.27 | $227.00 |
| 500 | $2.04 | $1,020.00 |
| 1,000 | $1.82 | $1,820.00 |
| 2,600 | $1.62 | $4,212.00 |
PIC16LF1847T-I/SO 개요
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of peripheral blocks. The PIC16 family is part of Microchip's legacy 8-bit portfolio, sitting between the baseline PIC10/12/16 families and the higher-performance PIC18 line, and is widely used in cost-sensitive, low-power, and mixed-signal embedded designs. PIC MCUs use a Harvard RISC architecture with a small, deterministic instruction set optimized for compact code generation and predictable interrupt latency.
The device operates from a wide 1.8V to 3.6V supply, supports internal oscillator frequencies up to 32 MHz, and includes integrated mTouch capacitive-touch sensing, a 12-channel 10-bit ADC, two comparators, a DAC, PWM, UART/I2C/SPI, and 16 enhanced I/O pins. The 'LF' prefix denotes the low-voltage variant; the 'T' suffix denotes tape-and-reel packaging; 'I' indicates the industrial -40C to +85C temperature range.
Key features include 49 instructions, a 16-level hardware stack with overflow/underflow reset, automatic context saving on interrupts, and on-board debug via PICkit 3 / MPLAB ICD 3. Typical applications include capacitive-touch user interfaces, sensor signal conditioning, low-power battery monitoring, and small home-appliance control boards.
드롭인 대체품: PIC16LF1847T-I/SO — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC16LF1847T-I/SO (동일 폼 팩터 및 풋프린트) — 차이점: Package, Program Memory (Flash), I/O Pins, Operating Temperature, ADC.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC16LF1847-I/SO
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC16F1847T-I/SO
✅ 드롭인✓ 재고 있음
$1.73 / 개
데이터시트 보기 →PIC16LF1827T-I/SO
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.15 / 개
데이터시트 보기 →PIC16LF1829T-I/SO
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC16LF1847T-I/SO 최대 정격 & 전기적 특성
| Family | PIC16F/LF184x |
| Core | PIC16 enhanced mid-range 8-bit |
| Instruction Set | 49 instructions |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Data RAM | 1 KB |
| Data EEPROM | 256 bytes |
| Max CPU Frequency | 32 MHz |
| Supply Voltage (VDD) | 1.8 V to 3.6 V |
| I/O Pins | 16 |
| ADC | 12-channel, 10-bit |
| Comparators | 2 |
| 패키지 | 18-pin SOIC (SOIC-18, 7.50 mm width) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40 C to +85 C (Industrial) |
| Technology | nanoWatt XLP (eXtreme Low Power) |
| MSL 레벨 | 1 |
| RoHS 상태 | Compliant |
| Packaging | Tape & Reel |
PIC16LF1847T-I/SO 핀 구성
| 핀 1 | RA3/MCLR/VPP — Digital I/O / Master Clear (reset) / Programming voltage |
| 핀 2 | RA4/AN3/C1OUT — Digital I/O / Analog input 3 / Comparator 1 output |
| 핀 3 | RA5/AN4/SS/HLVDIN — Digital I/O / Analog input 4 / SPI slave select / HLVD input |
| 핀 4 | RA6/OSC2/CLKOUT — Digital I/O / Crystal oscillator output / CLKOUT |
| 핀 5 | RA7/OSC1/CLKIN — Digital I/O / Crystal oscillator input / CLKIN |
| 핀 6 | VSS — Ground reference |
| 핀 7 | RA0/AN0/C12IN0+ — Digital I/O / Analog input 0 / Comparator 1/2 positive input 0 |
| 핀 8 | RA1/AN1/C12IN1- — Digital I/O / Analog input 1 / Comparator 1/2 negative input 1 |
| 핀 9 | RA2/AN2/C2OUT — Digital I/O / Analog input 2 / Comparator 2 output |
| 핀 10 | RC0/SOSCO/T1CKI — Digital I/O / Secondary oscillator output / Timer1 clock input |
| 핀 11 | RC1/SOSCI/CCP2 — Digital I/O / Secondary oscillator input / Capture/Compare/PWM 2 |
| 핀 12 | RC2/AN6/CCP1 — Digital I/O / Analog input 6 / Capture/Compare/PWM 1 |
| 핀 13 | RC3/AN7/SEG7 — Digital I/O / Analog input 7 / LCD segment 7 |
| 핀 14 | RC4/AN8/SDA/SDI — Digital I/O / Analog input 8 / I2C data / SPI data in |
| 핀 15 | RC5/AN9/SCL/SCK — Digital I/O / Analog input 9 / I2C clock / SPI clock |
| 핀 16 | RC6/AN10/TX/CK — Digital I/O / Analog input 10 / USART TX / USART clock |
| 핀 17 | RC7/AN11/RX/DT — Digital I/O / Analog input 11 / USART RX / USART data |
| 핀 18 | VDD — Positive supply voltage (1.8V to 3.6V) |
일반적인 애플리케이션
PIC16LF1847T-I/SO 적합 용도: 6 애플리케이션s: Capacitive Touch HMI, Battery-Powered Sensor Node, Home Appliance Control Board, LED Lighting Driver Controller, Industrial Sensor Conditioning, Consumer Remote Control.
Capacitive Touch HMI
The PIC16LF1847T-I/SO is well suited for low-power capacitive-touch human-machine interfaces because of its integrated mTouch peripheral, 12-channel 10-bit ADC, and nanoWatt XLP technology. The CVD-based touch acquisition runs through standard I/O pins, allowing up to 16 touch electrodes without external touch ICs, lowering BOM cost. Its 1.8V-3.6V operation makes it ideal for battery-powered remote controls, smart locks, and wearable touch panels. The 14 KB Flash and 1 KB RAM comfortably host a touch-scanning state machine plus simple debounce and gesture logic. Estimated: at 32 MHz active / 1.8V, the device draws ~3 mA, while XLP sleep drops below 1 uA, enabling weeks of standby on a CR2032 coin cell.
추천
Battery-Powered Sensor Node
For wireless or wired sensor nodes on coin-cell or 2xAA batteries, the PIC16LF1847T-I/SO offers a sub-3.6V supply range and nanoWatt XLP sleep currents under 1 uA. The integrated 10-bit ADC, two comparators, and 256-byte EEPROM allow direct connection to thermistors, photodiodes, or 4-20 mA loop sensors. With 14 KB Flash and 1 KB RAM, the MCU runs small scheduling loops and stores calibration in EEPROM. Recommended companion ICs include low-power op-amps for signal conditioning and sub-GHz RF transceivers for wireless uplink; the PIC's UART/SPI/I2C peripherals interoperate with all common sensor and radio ICs. Estimated: at 1 sample/second duty cycle, average current is dominated by sensor excitation, not MCU.
추천
Home Appliance Control Board
Small home appliances such as coffee makers, air purifiers, and countertop ovens benefit from the PIC16LF1847T-I/SO's robust 16 I/O pins, 32 MHz speed, and PWM/CCP peripherals. The MCU directly drives triac-gate optocouplers, MOSFET gate drivers, and relay coils, while its ADC samples thermistor or pressure-sensor feedback for closed-loop control. With 14 KB Flash, designers can implement PID loops, EEPROM-stored user presets, and simple UI logic on character LCDs or LED ring indicators. The -40C to +85C industrial temperature range supports under-cabinet kitchen environments. Recommended companion ICs include zero-cross triac drivers and isolated AC mains sensing.
추천
LED Lighting Driver Controller
The PIC16LF1847T-I/SO suits cost-sensitive LED drivers in architectural, accent, and decorative luminaires. Its PWM module with multiple channels enables smooth dimming via analog or PWM dimming standards, while the 10-bit ADC reads ambient light sensors and potentiometer dim controls. With 14 KB Flash, the device implements dimming curves, color-mixing logic, and DALI or 0-10V protocol handling for commercial fixtures. The wide 1.8V-3.6V supply allows direct operation from a small switching supply or even battery backup. Estimated: at 32 MHz / 3.3V, the MCU easily handles 8+ PWM channels simultaneously. Recommended companions: constant-current LED drivers and I2C-controlled RGB color sensors.
추천
Industrial Sensor Conditioning
Factory-floor sensors measuring pressure, flow, or position benefit from the PIC16LF1847T-I/SO's 12-channel 10-bit ADC, two comparators, and hardware-capable PWM for excitation signals. Its 1.8V-3.6V operation tolerates 4-20 mA loop power arrangements when paired with an external LDO or shunt regulator. With 14 KB Flash and 1 KB RAM, the MCU runs moving-average filters, linearization math, and HART or Modbus slave stacks. The -40C to +85C industrial temperature rating ensures operation inside sealed sensor housings. Recommended companions: 4-20 mA loop transmitters, RS-485 transceivers, and precision op-amps for thermocouple/bridge excitation.
추천
Consumer Remote Control
IR/RF remote controls for TVs, set-top boxes, and smart-home hubs use the PIC16LF1847T-I/SO because of its nanoWatt XLP technology (sub-uA standby), low-voltage 1.8V-3.6V operation from a single CR2032 or 2xAAA, and small SOIC-18 footprint. The 14 KB Flash supports multiple IR protocols (RC5, NEC, SIRC) or simple RF pairing stacks, while the 1 KB RAM handles button debouncing and rolling-code buffers. The 16 I/O pins accommodate full keypads plus status indicators. Estimated: a remote transmitting a few keystrokes per day can operate 1-3 years on a CR2032 thanks to XLP sleep. Recommended companions: IR emitters, sub-GHz RF transmitters, and piezoelectric buzzers.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC16LF1847T-I/SO — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC16LF1847-I/SO | PIC16F1847T-I/SO | PIC16LF1827T-I/SO | PIC16LF1829T-I/SO |
|---|---|---|---|---|---|
| Package | SOIC-18 (7.50 mm) | SOIC-18 (7.50 mm) - same | SOIC-18 (7.50 mm) - same | SOIC-18 (7.50 mm) - same | SOIC-18 (7.50 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory (Flash) | 14 KB | 14 KB | 14 KB | 7 KB | 14 KB |
| Data RAM | 1 KB | 1 KB | 1 KB | 384 bytes | 1 KB |
| Data EEPROM | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes |
| Max CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Supply Voltage (VDD) | 1.8V to 3.6V | 1.8V to 3.6V | 1.8V to 5.5V | 1.8V to 3.6V | 1.8V to 3.6V |
| I/O Pins | 16 | 16 | 16 | 16 | 16 |
| ADC | 12-channel, 10-bit | 12-channel, 10-bit | 12-channel, 10-bit | 12-channel, 10-bit | 12-channel, 10-bit |
주요 차별점
- Lowest voltage range with mTouch + 12-bit ADC compatibility (vs PIC16F1847T-I/SO)
- Larger Flash than nearest-cost reduced variant (vs PIC16LF1827T-I/SO)
- mTouch-capable while staying in same SOIC-18 footprint (vs PIC16LF1829T-I/SO)
설계 노트
The PIC16LF1847T-I/SO operates from 1.8V to 3.6V. Add a 100 nF decoupling capacitor as close as possible to the VDD pin (pin 18) and a bulk 10 uF tantalum or ceramic capacitor at the supply rail entry. For battery applications, a series ferrite bead between battery and VDD reduces inrush transients; the nanoWatt XLP technology allows the MCU to enter sleep mode below 1 uA typical when the WDT is disabled.
Pin 1 (RA3/MCLR/VPP) is shared between digital I/O, external reset, and ICSP voltage. If left as digital I/O without configuring MCLRE=0 in configuration words, the device will not start without a proper MCLR pull-up. For low-power applications where MCLR is disabled, ensure configuration word MCLRE=0 is set in code to avoid a floating reset pin. Estimated: an unconfigured MCLR pin can pull >50 uA continuously through internal weak pull-up.
Place the 32.768 kHz crystal (if used for RTCC) within 5 mm of pins 10 (SOSCO) and 11 (SOSCI). Keep high-current switching traces (PWM, LED drivers) away from analog ADC traces (RC2-RC7 in analog mode). Use a ground plane on the bottom layer and route the VDD/VSS traces as wide as possible; the SOIC-18 package has adequate thermal performance for normal MCU operation but no heatsinking is required.
For mTouch capacitive-sensing applications, route the touch electrode traces as short, narrow traces with a ground pour around them; minimize trace-to-trace coupling. Add a 1-2 mm keep-out zone around each touch pad. Per Microchip application notes, ground-fill hatching (rather than solid pour) beneath touch electrodes improves sensitivity consistency across the PCB. Series resistors (1-10 kohm) on touch pins reduce EMI susceptibility.
규정 준수 정보
RoHS compliant per Microchip product page and DigiKey listing. Not AEC-Q100 qualified; choose PIC16F1847-E/SO or PIC16LF1847T-I/SO automotive-grade variants for automotive designs. Industrial temperature grade -40C to +85C.
