PIC17C756AT-33I/PT - 33MHz 8-bit OTP MCU 32KB TQFP-64 | Microchip
부품 번호: PIC17C756AT-33I/PT ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $14.5 | $14.50 |
| 10 | $13.2 | $132.00 |
| 100 | $11.85 | $1,185.00 |
| 500 | $10.4 | $5,200.00 |
| 1,000 | $9.15 | $9,150.00 |
PIC17C756AT-33I/PT 개요
A PIC microcontroller is a Harvard-architecture RISC processor family that separates program and data memory spaces to enable single-cycle instruction fetch and deterministic execution. The PIC17C family sits at the top of Microchip's classic 8-bit portfolio: in the system hierarchy it is classified as a microcontroller (MCU) -> embedded controller -> 8-bit RISC processor -> semiconductor IC. Unlike PIC16C/PIC12C parts, the PIC17C line provides a 16-bit instruction word, hardware multiply, and an extended peripheral set aimed at more demanding embedded designs while remaining source-compatible with smaller PIC parts.
Key differentiating specifications include the 33 MHz maximum clock input (giving 121 ns instruction cycle for branches and 121 ns for normal single-cycle instructions), hardware single-cycle multiplier, 10-bit ADC, and 50 I/O - significantly more than legacy PIC16F parts. The part runs from a 4.5 V to 5.5 V single supply and is offered in a plastic TQFP-64 (10x10 mm) footprint for surface-mount production.
Typical applications include industrial control front-ends, motor drive signal conditioning, sensor aggregation nodes, and legacy embedded products where the PIC17C toolchain and code base are already deployed. The device is suited to designs that need more RAM and I/O than PIC16F or PIC18F parts can supply, while keeping the established 5 V PIC ecosystem. Designers should note that PIC17C is OTP-only; for in-field reprogrammability the recommended migration path is the Flash-based PIC18F6520. Per Microchip, the PIC17C756A is being replaced by PIC18F6520 in new designs.
드롭인 대체품: PIC17C756AT-33I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC17C756AT-33I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Data Bus Width, Package, ADC, Operating Temperature, Core Architecture.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC17C756AT-33E/PT
✅ 드롭인✓ 재고 있음
$10.36 / 개
데이터시트 보기 →PIC17C756A-33I/PT
✅ 드롭인✓ 재고 있음
$10.2 / 개
데이터시트 보기 →PIC17C756A-33E/PT
✅ 드롭인✓ 재고 있음
$7.55 / 개
데이터시트 보기 →PIC17C756AT-16/PT
✅ 드롭인✓ 재고 있음
$11.95 / 개
데이터시트 보기 →PIC18F6520-I/PT
✅ 드롭인✓ 재고 있음
$6.1 / 개
데이터시트 보기 →PIC17C756AT-33I/PT 최대 정격 & 전기적 특성
| Core Architecture | PIC 8-bit RISC (Harvard) |
| Series | PIC 17C |
| 최대 클록 주파수 | 33 MHz |
| Instruction Cycle Time | 121 ns (single-cycle) |
| Performance | 8.25 MIPS |
| Program Memory Size | 32 KB (16K x 16) OTP |
| RAM Size | 902 bytes |
| 데이터 버스 폭 | 16-bit (external) |
| I/O Pins | 50 |
| 공급 전압 | 4.5 V to 5.5 V |
| ADC | 10-bit A/D converter |
| Communication Interfaces | I2C, SPI, UART/USART |
| Peripherals | Brown-out Detect, POR, PWM, WDT |
| Hardware Multiplier | Single-cycle 8x8 |
| 동작 온도 | -40C to +85C (Industrial) |
| 패키지 | 64-pin TQFP (10x10 mm) |
| 실장 유형 | Surface Mount |
| Program Memory Type | OTP (One-Time Programmable) |
PIC17C756AT-33I/PT 핀 구성
| 핀 1 | RA0/AN0 — Port A bit 0 / Analog input 0 |
| 핀 2 | RA1/AN1 — Port A bit 1 / Analog input 1 |
| 핀 3 | RA2/AN2 — Port A bit 2 / Analog input 2 |
| 핀 4 | RA3/AN3 — Port A bit 3 / Analog input 3 |
| 핀 5 | RA4/AN4 — Port A bit 4 / Analog input 4 |
| 핀 6 | RA5/AN5 — Port A bit 5 / Analog input 5 |
| 핀 7 | RA6/AN6 — Port A bit 6 / Analog input 6 |
| 핀 8 | RA7/AN7 — Port A bit 7 / Analog input 7 |
| 핀 9 | VSS — Ground reference |
| 핀 10 | OSC1/CLKIN — Oscillator input / external clock in |
| 핀 11 | OSC2/CLKOUT — Oscillator output / clock out |
| 핀 12 | MCLR — Master clear reset input (active low) |
| 핀 13 | RB0/INT0 — Port B bit 0 / External interrupt 0 |
| 핀 14 | RB1/INT1 — Port B bit 1 / External interrupt 1 |
| 핀 15 | RB2/INT2 — Port B bit 2 / External interrupt 2 |
| 핀 16 | RB3/INT3 — Port B bit 3 / External interrupt 3 |
| 핀 17 | RB4 — Port B bit 4 |
| 핀 18 | RB5 — Port B bit 5 |
| 핀 19 | RB6/PGC — Port B bit 6 / ICSP clock |
| 핀 20 | RB7/PGD — Port B bit 7 / ICSP data |
| 핀 21 | RC0 — Port C bit 0 |
| 핀 22 | RC1 — Port C bit 1 |
| 핀 23 | RC2 — Port C bit 2 |
| 핀 24 | RC3 — Port C bit 3 |
| 핀 25 | RC4 — Port C bit 4 |
| 핀 26 | RC5 — Port C bit 5 |
| 핀 27 | RC6/TX/CK — Port C bit 6 / UART TX / I2C clock |
| 핀 28 | RC7/RX/DT — Port C bit 7 / UART RX / I2C data |
| 핀 29 | RD0 — Port D bit 0 |
| 핀 30 | RD1 — Port D bit 1 |
| 핀 31 | RD2 — Port D bit 2 |
| 핀 32 | RD3 — Port D bit 3 |
| 핀 33 | RD4 — Port D bit 4 |
| 핀 34 | RD5 — Port D bit 5 |
| 핀 35 | RD6 — Port D bit 6 |
| 핀 36 | RD7 — Port D bit 7 |
| 핀 37 | VDD — Digital supply voltage |
| 핀 38 | VSS — Ground reference |
| 핀 39 | RE0/RD — Port E bit 0 / Parallel port read |
| 핀 40 | RE1/WR — Port E bit 1 / Parallel port write |
| 핀 41 | RE2/CS — Port E bit 2 / Parallel port chip select |
| 핀 42 | RF0 — Port F bit 0 |
| 핀 43 | RF1 — Port F bit 1 |
| 핀 44 | RF2 — Port F bit 2 |
| 핀 45 | RF3 — Port F bit 3 |
| 핀 46 | RF4 — Port F bit 4 |
| 핀 47 | RF5 — Port F bit 5 |
| 핀 48 | RF6 — Port F bit 6 |
| 핀 49 | RF7 — Port F bit 7 |
| 핀 50 | RG0 — Port G bit 0 |
| 핀 51 | RG1 — Port G bit 1 |
| 핀 52 | RG2 — Port G bit 2 |
| 핀 53 | RG3 — Port G bit 3 |
| 핀 54 | RG4 — Port G bit 4 |
| 핀 55 | AVDD — Analog supply voltage |
| 핀 56 | AVSS — Analog ground reference |
| 핀 57 | NC — Not connected (per datasheet) |
| 핀 58 | NC — Not connected (per datasheet) |
| 핀 59 | NC — Not connected (per datasheet) |
| 핀 60 | NC — Not connected (per datasheet) |
| 핀 61 | NC — Not connected (per datasheet) |
| 핀 62 | NC — Not connected (per datasheet) |
| 핀 63 | NC — Not connected (per datasheet) |
| 핀 64 | NC — Not connected (per datasheet) |
일반적인 애플리케이션
PIC17C756AT-33I/PT 적합 용도: 6 애플리케이션s: Industrial Process Control Front-End, Sensor Aggregation and Data Logger Nodes, Motor Drive Signal Conditioning, Legacy Embedded Replacement Boards, User Interface / HMI Controllers, Automotive Body and Chassis Modules (Legacy).
Industrial Process Control Front-End
The PIC17C756AT-33I/PT's 50 I/O pins and integrated 10-bit ADC make it a strong fit for industrial process-control front-ends that aggregate multiple analog sensor inputs (temperature, pressure, flow) and drive digital control outputs. At 33 MHz / 8.25 MIPS, the part can service a multi-channel scan loop and run a PID control cycle within a sub-millisecond control period while leaving headroom for serial communication. Its 902 bytes of RAM support modest data buffers and the on-chip I2C/SPI/UART block allows connection to industrial HMI modules. Choose this part only when legacy OTP code or approved tooling must be preserved; otherwise the Flash-based PIC18F6520 is preferred.
추천
Sensor Aggregation and Data Logger Nodes
With 50 digital I/O and a 10-bit ADC, the PIC17C756AT-33I/PT can read a dozen analog sensors plus digital switch inputs in a single chip, making it useful for remote sensor-aggregation nodes that buffer readings in 902 bytes of RAM before forwarding them over UART or SPI to a host. The 8.25 MIPS throughput is enough to apply moving-average filtering and run a simple state machine without offloading work to an external DSP. Brown-out detect and POR simplify unattended deployment, while the industrial -40C to +85C temperature grade handles outdoor enclosures. For new designs, PIC18F6520-I/PT offers Flash reprogrammability for field firmware updates.
추천
Motor Drive Signal Conditioning
The PIC17C756AT-33I/PT's PWM, capture, and 10-bit ADC blocks map cleanly to motor-drive signal-conditioning applications where the MCU reads back shunt currents, DC-bus voltage, and position sensors and generates PWM reference signals for a downstream gate driver. With 8.25 MIPS, the part can close a current loop in tens of microseconds and still service UART diagnostics. Its 5 V supply simplifies interface to traditional analog gate-driver front-ends. Choose this part for maintaining compatibility with existing 5 V motor-control firmware; for new motor-control designs, the dsPIC33EP64MC204 offers DSP-class performance.
추천
Legacy Embedded Replacement Boards
The PIC17C756AT-33I/PT is the preferred source for replacement boards on already-deployed equipment whose firmware was compiled against the PIC17C architecture and is no longer available in source form. Because the part is OTP-only, exact silicon behavior - including instruction timing at 33 MHz - is preserved, making it ideal for one-to-one swap repair of legacy 5 V PIC systems. For higher-volume replacements, Microchip's officially recommended migration target is the pin-compatible PIC18F6520-I/PT, which can be reflashed in-circuit for future serviceability.
추천
User Interface / HMI Controllers
With 50 I/O, the PIC17C756AT-33I/PT can drive key matrices, LED indicators, and character or small graphic LCDs in standalone HMI panels without external I/O expanders. The integrated I2C and SPI buses make it straightforward to connect to dedicated LED drivers or to a graphical OLED module from a Microchip partner. At 8.25 MIPS the part can scan a 4x5 key matrix plus a 4-digit 7-segment display inside a 10 ms update window while running UART diagnostics. For new HMI designs, PIC18F6520-I/PT offers Flash reprogrammability for last-minute screen changes.
추천
Automotive Body and Chassis Modules (Legacy)
Although not AEC-Q100 qualified in the standard 'I' grade, the PIC17C756AT-33I/PT family is sometimes found in older 5 V body-control modules where its 50 I/O drive relays, switches, and indicator lamps. For new automotive designs the standard replacement path is a modern AEC-Q100-qualified PIC18 or dsPIC33 variant; for one-to-one repair of legacy 5 V automotive modules, the PIC17C756AT-33E/PT extended-temperature variant (-40C to +125C) is the most rugged drop-in within the same family.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC17C756AT-33I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC17C756AT-33E/PT | PIC17C756A-33I/PT | PIC17C756A-33E/PT | PIC17C756AT-16/PT | PIC18F6520-I/PT |
|---|---|---|---|---|---|---|
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 16 MHz | 40 MHz |
| Program Memory | 32 KB OTP | 32 KB OTP | 32 KB OTP | 32 KB OTP | 32 KB OTP | 32 KB Flash |
| Memory Type | OTP | OTP | OTP | OTP | OTP | Flash |
| RAM Size | 902 bytes | 902 bytes | 902 bytes | 902 bytes | 902 bytes | 2048 bytes |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | Active |
주요 차별점
- Highest clock grade of the OTP PIC17C756A family (vs PIC17C756AT-16/PT)
- Industrial temperature grade vs commercial (vs PIC17C756A-33/PT (no 'I' suffix))
- Official Flash-based migration target from Microchip (vs PIC17C756A-33I/PT (same die, OTP))
설계 노트
The PIC17C756AT-33I/PT operates from a single 4.5 V to 5.5 V rail. Place a 100 nF decoupling capacitor as close as possible to each VDD pin and a bulk 10 uF tantalum or ceramic cap on the board-level 5 V rail. The analog supply AVDD should be tied to VDD through a ferrite bead for ADC-sensitive designs and bypassed with a dedicated 100 nF cap. Brown-out Detect (BOD) is factory-trimmed and should be enabled in configuration bits for unattended deployments.
PIC17C756AT-33I/PT is OTP-only - the program memory can be written once and cannot be erased or rewritten. Always verify compiled firmware on a PIC17C756A JW windowed or PIC18F Flash equivalent before committing to OTP programming. In-system programming uses the PGC/PGD pins (RB6/RB7); do not repurpose these for application I/O. The oscillator start-up timer (OST) is mandatory for crystal modes; running from an external clock without OST selected can produce intermittent resets.
Keep the OSC1/OSC2 traces short and surrounded by ground pour to minimize radiated EMI from the 33 MHz fundamental. Route the analog inputs (RA0-RA7) away from PWM and digital switching lines to preserve 10-bit ADC accuracy; use a ground guard ring around AVSS. Place the MCLR pull-up (typically 10 kohm) close to the pin and add a 100 nF cap on MCLR for noise immunity in electrically noisy industrial environments.
규정 준수 정보
RoHS/REACH compliance status was not present in the verified web data; check Microchip product page for the latest declaration. The part is NOT AEC-Q100 qualified; for automotive designs use the Flash-based PIC18F or dsPIC33 automotive-grade family.
