PIC18F6520-I/PT - 8-Bit 40MHz 32KB Flash MCU 64-TQFP | Microchip
부품 번호: PIC18F6520-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $9.53 | $9.53 |
| 10 | $8.58 | $85.80 |
| 100 | $7.62 | $762.00 |
| 500 | $6.85 | $3,425.00 |
| 1,000 | $6.1 | $6,100.00 |
PIC18F6520-I/PT 개요
An 8-bit microcontroller (MCU) is a compact programmable processor built around a CPU with 8-bit wide data paths, on-chip memory (Flash for code, SRAM for data, EEPROM for non-volatile storage), and integrated peripherals such as timers, ADC, communication interfaces (UART, SPI, I2C), and general-purpose I/O. Microcontrollers sit at the foundation of embedded systems, hierarchically classified as embedded IC -> MCU -> 8-bit MCU -> PIC18F family -> PIC18F6520. The PIC18F6520 extends the popular PIC18F452 with more RAM, additional I/O, a second serial port, and additional timers and CCP modules while remaining upward-software-compatible with PIC16 and PIC17 devices.
Key features include 52 digital I/O pins (54 total I/O per datasheet summary), a 10-bit ADC with up to 16 channels, two enhanced USART modules, MSSP (SPI/I2C), three timers, two Capture/Compare/PWM modules, two comparators, and a parallel slave port. The PIC18F6520 uses an enhanced Harvard RISC architecture with hardware multiplier and 16-bit instructions, achieving 10 MIPS throughput at 40 MHz. In-circuit debugging and ICSP (In-Circuit Serial Programming) are supported via MPLAB ICD and the ICSP interface.
Typical applications include industrial control systems, automotive body and HVAC modules, consumer appliances, home automation, USB-to-UART bridges, sensor hubs, display controllers, and low-end graphical user interfaces. The wide peripheral set, large I/O count, and generous memory make it a strong fit for human-machine interface (HMI) controllers and multi-protocol gateway designs.
Design considerations include decoupling on AVDD/AVSS for ADC accuracy, brown-out reset (BOR) configuration via configuration bits, and watchdog timer (WDT) enable for safety-critical applications. Migrating from PIC18F452 code is straightforward via MPLAB XC8.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: PIC18F6520-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC18F6520-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Timers, Package, Core Architecture, ADC, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC18F6620-I/PT
✅ 드롭인✓ 재고 있음
$5.55 / 개
데이터시트 보기 →PIC18F6720-I/PT
✅ 드롭인✓ 재고 있음
$21.1 / 개
데이터시트 보기 →PIC18F6520-E/PT
✅ 드롭인✓ 재고 있음
$7.65 / 개
데이터시트 보기 →PIC18F8520-I/PT
✅ 드롭인✓ 재고 있음
$5.1586 / 개
데이터시트 보기 →PIC18F8720-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC18F458-I/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC18F4685-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$5.65 / 개
데이터시트 보기 →PIC18F6520-I/PT 최대 정격 & 전기적 특성
| Core Architecture | 8-bit PIC18 enhanced Harvard RISC |
| Family | PIC18F6x2x |
| Maximum Clock Speed | 40 MHz |
| Program Memory (Flash) | 32 KB (16K x 16) |
| Data RAM | 2 KB (2048 bytes) |
| EEPROM | 1 KB (1024 bytes) |
| I/O Pins | 52 (54 per datasheet summary) |
| ADC | 10-bit, up to 16 channels |
| Supply Voltage (Vdd) | 4.2 V to 5.5 V |
| 동작 온도 | -40C to +85C (Industrial, "I" grade) |
| 패키지 | 64-TQFP (10x10 mm) |
| 실장 유형 | Surface Mount |
| Communication Interfaces | 2x USART (EUSART), MSSP (SPI/I2C) |
| Timers | 3 (Timer0/1/2) |
| Capture/Compare/PWM | 2 CCP modules |
| Comparators | 2 |
| Parallel Slave Port | Yes |
| ICSP / In-Circuit Debug | Yes |
| RoHS 상태 | Compliant |
| MSL 레벨 | 3 |
PIC18F6520-I/PT 핀 구성
| 핀 1 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| 핀 2 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| 핀 3 | RA2/AN2/VREF- — PORTA bit 2 / Analog input 2 / VREF- |
| 핀 4 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / VREF+ |
| 핀 5 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| 핀 6 | RA5/AN4 — PORTA bit 5 / Analog input 4 |
| 핀 7 | RA6/OSC2 — PORTA bit 6 / Oscillator output |
| 핀 8 | RA7/OSC1 — PORTA bit 7 / Oscillator input |
| 핀 9 | RE0/RD/AN5 — PORTE bit 0 / Parallel slave port read |
| 핀 10 | RE1/WR/AN6 — PORTE bit 1 / Parallel slave port write |
| 핀 11 | Vss — Ground |
| 핀 12 | Vdd — Positive supply voltage |
| 핀 13 | RE2/CS/AN7 — PORTE bit 2 / PSP chip select / Analog input 7 |
| 핀 14 | AVdd — Analog positive supply voltage |
| 핀 15 | AVss — Analog ground |
| 핀 16 | RB0/INT0 — PORTB bit 0 / External interrupt 0 |
| 핀 17 | RB1/INT1 — PORTB bit 1 / External interrupt 1 |
| 핀 18 | RB2/INT2 — PORTB bit 2 / External interrupt 2 |
| 핀 19 | RB3/INT3/CCP2A — PORTB bit 3 / External interrupt 3 / CCP2 |
| 핀 20 | RB4 — PORTB bit 4 |
| 핀 21 | RB5 — PORTB bit 5 |
| 핀 22 | RB6/PGC — PORTB bit 6 / ICSP clock |
| 핀 23 | RB7/PGD — PORTB bit 7 / ICSP data |
| 핀 24 | RC0/T1OSO/T13CKI — PORTC bit 0 / Timer1 oscillator output |
| 핀 25 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input |
| 핀 26 | RC2/CCP1 — PORTC bit 2 / CCP1 PWM output |
| 핀 27 | RC3/SCK/SCL — PORTC bit 3 / MSSP SPI clock / I2C clock |
| 핀 28 | RC4/SDI/SDA — PORTC bit 4 / MSSP SPI data in / I2C data |
| 핀 29 | RC5/SDO — PORTC bit 5 / MSSP SPI data out |
| 핀 30 | RC6/TX1/CK1 — PORTC bit 6 / EUSART1 transmit |
| 핀 31 | RC7/RX1/DT1 — PORTC bit 7 / EUSART1 receive |
| 핀 32 | RD0/PSP0 — PORTD bit 0 / Parallel slave port data 0 |
| 핀 33 | RD1/PSP1 — PORTD bit 1 / Parallel slave port data 1 |
| 핀 34 | RD2/PSP2 — PORTD bit 2 / Parallel slave port data 2 |
| 핀 35 | RD3/PSP3 — PORTD bit 3 / Parallel slave port data 3 |
| 핀 36 | RD4/PSP4 — PORTD bit 4 / Parallel slave port data 4 |
| 핀 37 | RD5/PSP5 — PORTD bit 5 / Parallel slave port data 5 |
| 핀 38 | RD6/PSP6 — PORTD bit 6 / Parallel slave port data 6 |
| 핀 39 | RD7/PSP7 — PORTD bit 7 / Parallel slave port data 7 |
| 핀 40 | Vss — Ground |
| 핀 41 | Vdd — Positive supply voltage |
| 핀 42 | RF0/CVREF — PORTF bit 0 / Comparator voltage reference |
| 핀 43 | RF1/AN8 — PORTF bit 1 / Analog input 8 |
| 핀 44 | RF2/AN9 — PORTF bit 2 / Analog input 9 |
| 핀 45 | RF3/AN10 — PORTF bit 3 / Analog input 10 |
| 핀 46 | RF4/AN11 — PORTF bit 4 / Analog input 11 |
| 핀 47 | RF5/AN12/C2OUT — PORTF bit 5 / Analog input 12 / Comparator 2 output |
| 핀 48 | RF6/AN13/C1OUT — PORTF bit 6 / Analog input 13 / Comparator 1 output |
| 핀 49 | RF7/AN14 — PORTF bit 7 / Analog input 14 |
| 핀 50 | RG0/C3OUT — PORTG bit 0 / Comparator 3 output |
| 핀 51 | RG1/TX2/CK2 — PORTG bit 1 / EUSART2 transmit |
| 핀 52 | RG2/RX2/DT2 — PORTG bit 2 / EUSART2 receive |
| 핀 53 | RG3/CCP3 — PORTG bit 3 / CCP3 module |
| 핀 54 | RG4/AN15 — PORTG bit 4 / Analog input 15 |
| 핀 55 | RG5 — PORTG bit 5 |
| 핀 56 | RH0/A16 — PORTH bit 0 / External memory address 16 |
| 핀 57 | RH1/A17 — PORTH bit 1 / External memory address 17 |
| 핀 58 | RH2/A18 — PORTH bit 2 / External memory address 18 |
| 핀 59 | RH3/A19 — PORTH bit 3 / External memory address 19 |
| 핀 60 | MCLR/Vpp — Master clear / ICSP programming voltage |
| 핀 61 | Vss — Ground |
| 핀 62 | Vdd — Positive supply voltage |
| 핀 63 | RH4 — PORTH bit 4 |
| 핀 64 | RH5 — PORTH bit 5 |
일반적인 애플리케이션
PIC18F6520-I/PT 적합 용도: 6 애플리케이션s: Industrial Control PLC, Human-Machine Interface (HMI), Automotive Body & HVAC Modules, Consumer Appliance Control, Multi-Protocol Sensor Gateway, USB-to-UART Bridge Dongle.
Industrial Control PLC
The PIC18F6520-I/PT fits industrial PLC and process-control applications because it provides 52 digital I/O lines to drive relays, optocouplers, and discrete indicators, plus a 16-channel 10-bit ADC to read 4-20 mA or 0-10 V sensor signals. Its 40 MHz core delivers 10 MIPS, easily handling Modbus RTU slave stacks on either of the two EUSART ports, while 32 KB Flash supports small ladder-logic interpreters or PID control firmware. The industrial -40C to +85C temperature rating allows deployment in factory-floor cabinets without additional thermal hardening.
추천
Human-Machine Interface (HMI)
For HMI panels with character LCDs, keypads, and rotary encoders, the PIC18F6520-I/PT offers the right balance of I/O count, memory, and computational throughput. The 32 KB Flash accommodates menu trees and bitmap fonts, while the two EUSART modules interface with touch controllers and host PLCs simultaneously. The parallel slave port (PSP) enables high-throughput parallel updates to graphic LCDs without CPU overhead. Industrial temperature rating ensures reliable operation in control cabinet environments alongside other heat-generating electronics.
추천
Automotive Body & HVAC Modules
The PIC18F6520-I/PT is well-suited for non-safety automotive body controllers, HVAC panels, and instrument-cluster sub-modules. Its 52 I/O drive window lift switches, mirror controls, and LED backlights directly, while the two USART ports handle LIN bus communication and diagnostic interfaces. With proper external protection (TVS diodes, load dump protection), the MCU operates reliably across automotive temperature and electrical transients. For CAN-enabled variants, consider the PIC18F4685 family drop-in alternative with an integrated CAN module in the same 64-TQFP footprint.
추천
Consumer Appliance Control
In washing machines, dishwashers, ovens, and refrigerators, the PIC18F6520-I/PT drives user interfaces, triac-fired loads, and sensor readouts at a competitive cost point. The 16-channel ADC monitors temperature (NTC/PTC), water level, and motor current, while the two CCP modules generate PWM signals for variable-speed motor drives or heater PID loops. 32 KB Flash supports appliance-grade firmware with self-test diagnostics, fault logging, and capacitive-touch sensing libraries via the MSSP peripheral.
추천
Multi-Protocol Sensor Gateway
The PIC18F6520-I/PT acts as a low-cost sensor-to-cloud gateway aggregating data from SPI, I2C, and UART sensors and forwarding it to a host processor or modem. Two EUSART modules allow simultaneous connections to a sensor bus and a wireless module, while the MSSP handles SPI or I2C sensor arrays. 32 KB Flash accommodates protocol translation logic for Modbus, I2C sensor stacks, and proprietary fieldbus variants. The wide 4.2V to 5.5V supply simplifies integration with industrial 5V sensors and RS-485 transceivers.
추천
USB-to-UART Bridge Dongle
In legacy-to-USB bridges for firmware update or service diagnostics, the PIC18F6520-I/PT pairs with a USB-serial IC to provide buffering, command parsing, and protocol framing. The two EUSART ports enable dual-domain bridging (one to legacy RS-232/RS-485 equipment, one to the USB bridge IC), and the 2 KB RAM buffers incoming packets before forwarding. Industrial temperature rating ensures operation in field-service tools across climate ranges.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC18F6520-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC18F6620-I/PT | PIC18F6720-I/PT | PIC18F6520-E/PT | PIC18F8520-I/PT | PIC18F4685-I/PT |
|---|---|---|---|---|---|---|
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-80 - different | TQFP-64 (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core | PIC18 8-bit, 40 MHz | PIC18 8-bit, 40 MHz | PIC18 8-bit, 40 MHz | PIC18 8-bit, 40 MHz | PIC18 8-bit, 40 MHz | PIC18 8-bit, 40 MHz |
| Flash | 32 KB | 64 KB | 128 KB | 32 KB | 32 KB | 96 KB |
| RAM | 2 KB | 4 KB | 3.8 KB | 2 KB | 2 KB | 3.8 KB |
| I/O Pins | 52 | 52 | 52 | 52 | 68 | 52 |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C |
| CAN Module | No | No | No | No | No | Yes (CAN 2.0B) |
주요 차별점
- Lowest-cost 64-TQFP option in the PIC18F6x20 family (vs PIC18F6620-I/PT)
- Industrial temperature range at lower cost vs extended grade (vs PIC18F6520-E/PT)
- Integrated parallel slave port for high-speed LCD/peripheral interfacing (vs PIC18F458-I/PT)
설계 노트
Decouple both Vdd/Vss pin pairs (pins 12/11, 41/40, 62/61) with 100 nF ceramic capacitors placed within 5 mm of the pins. AVdd (pin 14) and AVss (pin 15) require a separate 10 uF bulk plus 100 nF ceramic to achieve datasheet ADC SNR; sharing AVss with digital Vss creates ground bounce that corrupts ADC readings. Add a 10 uF tantalum or ceramic bulk capacitor near the ICSP/MCLR pin (60) to suppress programming-voltage transients during in-circuit programming.
Route the crystal traces to OSC1/OSC2 (pins 7/8) as short, symmetrical lengths surrounded by a ground guard ring to minimize EMI pickup. Place the 22 pF crystal load capacitors within 3 mm of the OSC pins. For high-speed designs using a 40 MHz oscillator, place a 100 ohm series resistor in each OSC trace to dampen over/undershoot. The ICSP/PGD/PGC pins (23/22) must be accessible without crossing other signal traces to support in-circuit debug.
Do not leave MCLR floating - tie it to Vdd through a 10 kohm resistor or drive it actively to avoid spurious resets. Configuration bits must be set explicitly: enable the watchdog timer (WDT) for safety-critical applications, configure BOR voltage for the expected Vdd range, and disable low-voltage programming if not used. The PIC18F6520 has a maximum Vdd of 5.5 V - exceeding this during hot-plug events or load-dump transients will permanently damage the part; add a TVS diode on the supply rail.
규정 준수 정보
RoHS and lead-free per Microchip product page; not AEC-Q100 qualified - select PIC18F46Jxx or PIC18F4685 family for automotive-grade variants. REACH compliance declared by Microchip.
