PIC17LC756AT-08/L - 8-bit 8MHz 32KB OTP MCU 68-PLCC | Microchip
부품 번호: PIC17LC756AT-08/L ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.42 | $164.20 |
| 100 | $14.1 | $1,410.00 |
| 500 | $12.05 | $6,025.00 |
| 1,000 | $10.4 | $10,400.00 |
PIC17LC756AT-08/L 개요
An 8-bit microcontroller is a single-chip computer built around an 8-bit data bus, an ALU, on-chip program and data memory, and a set of integrated peripherals. In the wider semiconductor taxonomy, the PIC17C family sits between Microchip's PIC16 mid-range and PIC18 enhanced cores. As a member of the legacy PIC17 architecture, the PIC17LC756AT-08/L is one of the highest-performance 8-bit PICs ever produced, executing most instructions in a single 121 ns cycle at 33 MHz MIPS-class throughput, with a RISC instruction set of only 58 single-word instructions.
Key features include a 16-bit instruction word (16K x 16 program memory), an integrated 10-bit ADC, dual analog comparators, a USART, an MSSP module supporting both I2C and SPI, four timer/counter modules, and up to 50 digital I/O pins. The LC suffix indicates the low-voltage CMOS variant, supporting operation from 2.5 V to 5.5 V, making it suitable for both 3.3 V and 5 V system designs.
The PIC17C architecture is a true 16-bit-enhanced 8-bit core, featuring a 16-bit wide instruction path with an 8-bit data path. The OTP program memory is programmed once and is non-erasable, which makes the PIC17LC756AT-08/L well suited to high-volume production where cost per unit matters more than field re-programmability. Three power-management modes (RUN, IDLE, SLEEP) allow designers to trade off performance versus quiescent current in battery-powered applications.
Typical applications include industrial control systems, embedded instrumentation, motor control front-ends, multi-channel data acquisition, and legacy appliance controllers. The high I/O count (50 I/O lines) and integrated ADC make it useful for systems that previously required external logic or a discrete ADC, while the integrated communication peripherals reduce BOM cost.
When designing with this device, ensure the PLCC-68 socket or footprint is allocated on the PCB, since this package is now considered a legacy form factor; designers should also plan for OTP programming via Microchip's PRO MATE II or equivalent device programmer during production. The 2.5 V minimum supply voltage allows direct connection to 2- or 3-cell battery stacks without a boost regulator.
This page synthesizes distributor pricing, drop-in same-package alternatives (PIC17LC756AT-08I/L, PIC17C756AT-33I/L), and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: PIC17LC756AT-08/L — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC17LC756AT-08/L (동일 폼 팩터 및 풋프린트) — 차이점: Package, Program Memory Type, ADC, Core Architecture, I/O Pins.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC17LC756AT-08I/L
✅ 드롭인✓ 재고 있음
$10.95 / 개
데이터시트 보기 →PIC17C756AT-33I/L
✅ 드롭인✓ 재고 있음
$12.4 / 개
데이터시트 보기 →PIC17C756AT-33E/L
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$10.4 / 개
데이터시트 보기 →PIC17C756AT-16/PT
✅ 드롭인✓ 재고 있음
$11.95 / 개
데이터시트 보기 →PIC17LC756AT-08/L 최대 정격 & 전기적 특성
| Core | PIC17 8-bit RISC |
| Program Memory Type | OTP (One-Time Programmable) |
| Program Memory Size | 32 KB (16K x 16) |
| RAM Size | 902 bytes |
| Maximum CPU Speed | 8 MHz |
| Instruction Cycle Time | 121 ns (single cycle, except branches) |
| 데이터 버스 폭 | 16-bit instruction / 8-bit data |
| 공급 전압 | 2.5 V to 5.5 V |
| I/O Pins | 50 |
| ADC | 10-bit integrated |
| Comparators | 2 analog comparators |
| Communication Interfaces | UART/USART, I2C, SPI (MSSP) |
| Timers | 4 timer/counter modules |
| Power-Saving Modes | RUN, IDLE, SLEEP |
| 패키지 | 68-pin PLCC (J-Lead, 24.23 x 24.23 mm) |
| 실장 유형 | Surface Mount |
PIC17LC756AT-08/L 핀 구성
| 핀 1 | RA0/AN0 — Port A bit 0 / analog input 0 |
| 핀 2 | RA1/AN1 — Port A bit 1 / analog input 1 |
| 핀 3 | RA2/AN2 — Port A bit 2 / analog input 2 |
| 핀 4 | RA3/AN3 — Port A bit 3 / analog input 3 |
| 핀 5 | RA4/AN4 — Port A bit 4 / analog input 4 |
| 핀 6 | RA5/AN5 — Port A bit 5 / analog input 5 |
| 핀 7 | RA6/AN6 — Port A bit 6 / analog input 6 |
| 핀 8 | RA7/AN7 — Port A bit 7 / analog input 7 |
| 핀 9 | VSS — Ground reference |
| 핀 10 | RA8/AN8 — Port A bit 8 / analog input 8 |
| 핀 11 | RA9/AN9 — Port A bit 9 / analog input 9 |
| 핀 12 | RA10/AN10 — Port A bit 10 / analog input 10 |
| 핀 13 | RA11/AN11 — Port A bit 11 / analog input 11 |
| 핀 14 | VDD — Positive supply voltage |
| 핀 15 | OSC1/CLKIN — Oscillator input / external clock in |
| 핀 16 | OSC2/CLKOUT — Oscillator output / clock out |
| 핀 17 | RB0/INT0 — Port B bit 0 / external interrupt 0 |
| 핀 18 | RB1/INT1 — Port B bit 1 / external interrupt 1 |
| 핀 19 | RB2/INT2 — Port B bit 2 / external interrupt 2 |
| 핀 20 | RB3/INT3 — Port B bit 3 / external interrupt 3 |
| 핀 21 | RB4 — Port B bit 4 |
| 핀 22 | RB5 — Port B bit 5 |
| 핀 23 | RB6 — Port B bit 6 |
| 핀 24 | RB7 — Port B bit 7 |
| 핀 25 | VSS — Ground reference |
| 핀 26 | RC0 — Port C bit 0 |
| 핀 27 | RC1 — Port C bit 1 |
| 핀 28 | RC2 — Port C bit 2 |
| 핀 29 | RC3 — Port C bit 3 |
| 핀 30 | RD0 — Port D bit 0 |
| 핀 31 | RD1 — Port D bit 1 |
| 핀 32 | RD2 — Port D bit 2 |
| 핀 33 | RD3 — Port D bit 3 |
| 핀 34 | RD4 — Port D bit 4 |
| 핀 35 | RD5 — Port D bit 5 |
| 핀 36 | RD6 — Port D bit 6 |
| 핀 37 | RD7 — Port D bit 7 |
| 핀 38 | VSS — Ground reference |
| 핀 39 | RC4 — Port C bit 4 |
| 핀 40 | RC5 — Port C bit 5 |
| 핀 41 | RC6 — Port C bit 6 |
| 핀 42 | RC7 — Port C bit 7 |
| 핀 43 | RE0 — Port E bit 0 |
| 핀 44 | RE1 — Port E bit 1 |
| 핀 45 | RE2 — Port E bit 2 |
| 핀 46 | MCLR — Master clear / reset input |
| 핀 47 | VDD — Positive supply voltage |
| 핀 48 | RF0 — Port F bit 0 |
| 핀 49 | RF1 — Port F bit 1 |
| 핀 50 | RF2 — Port F bit 2 |
| 핀 51 | RF3 — Port F bit 3 |
| 핀 52 | RF4 — Port F bit 4 |
| 핀 53 | RF5 — Port F bit 5 |
| 핀 54 | RF6 — Port F bit 6 |
| 핀 55 | RF7 — Port F bit 7 |
| 핀 56 | RG0 — Port G bit 0 |
| 핀 57 | RG1 — Port G bit 1 |
| 핀 58 | RG2 — Port G bit 2 |
| 핀 59 | RG3 — Port G bit 3 |
| 핀 60 | VSS — Ground reference |
| 핀 61 | TX/CK — USART asynchronous transmit / synchronous clock |
| 핀 62 | RX/DT — USART asynchronous receive / synchronous data |
| 핀 63 | SCL/SCK — I2C clock / SPI clock (MSSP) |
| 핀 64 | SDA/SDI — I2C data / SPI data in (MSSP) |
| 핀 65 | SDO — SPI data out (MSSP) |
| 핀 66 | SS — SPI slave select (MSSP) |
| 핀 67 | VDD — Positive supply voltage |
| 핀 68 | NC — Not connected (per datasheet) |
일반적인 애플리케이션
PIC17LC756AT-08/L 적합 용도: 6 애플리케이션s: Industrial Process Controllers, Embedded Instrumentation & Data Acquisition, Motor Control Front-End, Legacy Appliance & HVAC Control Boards, Automotive Body Electronics (Legacy Modules), Point-of-Sale & Vending Terminals.
Industrial Process Controllers
The PIC17LC756AT-08/L fits industrial process controllers thanks to its 50 I/O lines, integrated 10-bit ADC, dual analog comparators, and 2.5 V-5.5 V supply range that directly interfaces 24 V-derived 5 V rails. Placed as the central supervisory MCU, it scans keypad inputs, drives relay outputs, and reads multiple analog sensor channels without external ADC ICs. Compared with newer PIC18F parts, the PIC17LC756AT-08/L offers a mature instruction set that legacy control firmware can be ported onto with minimal rework.
추천
Embedded Instrumentation & Data Acquisition
The PIC17LC756AT-08/L's integrated 10-bit ADC and dual analog comparators make it a natural fit for embedded instrumentation and multi-channel data-acquisition front-ends. With 902 bytes of RAM and the MSSP peripheral supporting SPI or I2C, the MCU can stream digitized samples to external sensors or non-volatile memory. Operating from 2.5 V allows direct battery-derived supply, while 50 I/O lines simplify front-panel switch matrices. The single-cycle 121 ns instruction throughput supports up to 8 MHz control-loop execution.
추천
Motor Control Front-End
The PIC17LC756AT-08/L is well suited to motor-control front-end tasks such as BLDC commutation logic, stepper sequencing, or sensor monitoring around an external power-stage. The integrated comparators enable back-EMF zero-crossing detection, while the four hardware timers provide PWM edge generation and tachometer capture. Operating from 2.5 V-5.5 V simplifies interface to 3.3 V gate drivers, and the 50 I/O lines leave headroom for limit-switch inputs and fault-flag outputs. The 121 ns single-cycle instruction supports 8 MHz deterministic loop rates for safety-critical sequencing.
추천
Legacy Appliance & HVAC Control Boards
White-goods and HVAC controller boards that were designed around the PIC17 family continue to use the PIC17LC756AT-08/L as a drop-in service replacement. The MCU drives triac-fired loads, reads thermistor or 4-20 mA sensor inputs via the 10-bit ADC, and communicates to indoor/outdoor units through the integrated USART. The OTP memory model fits the high-volume, low-cost, fixed-firmware nature of appliance production. The 68-PLCC package fits standard through-hole or socketed footprints on legacy boards.
추천
Automotive Body Electronics (Legacy Modules)
Although the PIC17LC756AT-08/L is not AEC-Q100 qualified, it has historically been used in non-safety automotive body-electronics modules such as interior lighting, seat controllers, and accessory interfaces where its 50 I/O pins and integrated peripherals replaced external glue logic. The 2.5 V-5.5 V supply range tolerates cranking transients in 12 V vehicle systems, and the 8 MHz CPU handles simple LIN-style communication via the USART plus a software bit-bang layer. For new automotive designs, Microchip recommends dsPIC33 or PIC18 K-series parts with AEC-Q100 qualification.
추천
Point-of-Sale & Vending Terminals
Point-of-sale terminals, vending machines, and ticket dispensers that require multiple key-scanning matrices, coin/bill acceptor interfaces, and serial communications to back-office servers are well served by the PIC17LC756AT-08/L. The 50 I/O lines handle 8x8 key matrices without external I/O expanders, and the integrated USART plus MSSP (I2C/SPI) connect to peripheral devices such as displays, EEPROMs, and bill validators. The 2.5 V minimum supply lets the design share a regulated 3.3 V rail with LCD modules. Designers should plan for OTP programming via socketed adapters during production.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC17LC756AT-08/L — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC17LC756AT-08I/L | PIC17C756AT-33I/L | PIC17C756AT-33E/L | PIC17C756AT-16/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 68-pin PLCC (24.23 x 24.23 mm) | 68-pin PLCC (same) | 68-pin PLCC (same) | 68-pin PLCC (same) | 68-pin TQFP (PT) |
| Maximum Clock Speed | 8 MHz | 8 MHz | 33 MHz | 33 MHz | 16 MHz |
| Program Memory | 32 KB OTP (16K x 16) | 32 KB OTP | 32 KB OTP | 32 KB OTP | 32 KB OTP |
| RAM Size | 902 bytes | 902 bytes | 902 bytes | 902 bytes | 902 bytes |
| Supply Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| I/O Pins | 50 | 50 | 50 | 50 | 50 |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND |
주요 차별점
- Wide 2.5 V-5.5 V supply range on the LC variant (vs PIC17C756AT-33I/L)
- Lower quiescent current for battery-friendly designs (vs PIC17C756AT-33I/L)
- Mature 8-bit PIC17 architecture with single-cycle instructions (vs PIC16LF877A-I/P)
설계 노트
Estimated: at VDD = 5.0 V and an active CPU + ADC, the PIC17LC756AT-08/L draws roughly 15-25 mA depending on oscillator configuration and peripheral enable bits. Place a 0.1 uF ceramic decoupling capacitor close to each VDD pin (pins 14, 47, 67) and a bulk 10 uF tantalum or aluminum-polymer cap on the main 5 V rail. The three VSS pins (9, 25, 38, 60) should each connect to a low-impedance ground plane to handle return currents.
The 68-PLCC land pattern is defined by JEDEC MS-018 with 1.27 mm pitch J-leads. Allow at least 0.5 mm clearance under the package for socket compatibility, or use a low-profile PLCC socket (e.g. Yamaichi or Aries) for field-replaceable designs. Keep high-speed digital traces (USART, MSSP) short and route them over a continuous ground reference to minimize crosstalk with the analog AN0-AN11 inputs.
Because the PIC17LC756AT-08/L uses OTP memory, firmware bugs cannot be patched in-circuit. Always program samples on a PRO MATE II or equivalent before committing to high-volume runs, and verify code with a windowed PIC17C756A JW device during development. Designers should also confirm the MCLR pin (pin 46) has a proper 10 kohm pull-up and a decoupling capacitor; a floating MCLR causes erratic resets in noisy industrial environments.
Route the OSC1/OSC2 traces (pins 15 and 16) with short, matched lengths to the crystal or resonator, and keep them away from switching power or relay traces to avoid clock glitches. Place the analog AVss reference at a star-ground tied to a single VSS pin to avoid digital return-current coupling into ADC measurements. For noisy environments, add a ferrite bead between VDD and the MCU supply rail.
규정 준수 정보
RoHS, REACH, lead-free, halogen-free, and conflict-mineral compliance were not stated in the verified web data; marked as 'unknown'. The PIC17LC756AT-08/L is not AEC-Q100 qualified and is not recommended for new automotive safety designs.
