PIC18F2523-I/SO - 8-Bit 40MHz 32KB Flash MCU 28-SOIC | Microchip
부품 번호: PIC18F2523-I/SO ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.77 | $4.77 |
| 10 | $4.42 | $44.20 |
| 100 | $3.95 | $395.00 |
| 500 | $3.51 | $1,755.00 |
| 1,000 | $3.12 | $3,120.00 |
PIC18F2523-I/SO 개요
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripheral interfaces on one die; the PIC18 family uses a RISC-based architecture with hardware multiply, providing deterministic instruction execution and C-compiler-friendly performance for embedded control applications.
Key features of the PIC18F2523 include 1536 bytes of RAM, 256 bytes of EEPROM, 25 digital I/O pins, 10-channel 12-bit A/D converter, two CCP modules, one Enhanced CCP (ECCP), two comparators, a USART with LIN support, an MSSP (SPI/I2C) port, and an internal oscillator block programmable from 31 kHz to 8 MHz (and up to 32 MHz with the 4X PLL). The nanoWatt technology adds multiple power-managed modes for battery-aware designs.
Architecturally the device uses a 16-bit wide instruction word, an 8-bit data path, a hardware 8x8 multiplier (single-cycle), and a 31-level hardware stack. The 12-bit ADC supports up to 12 input channels on larger pin-count variants, enabling sensor conditioning and motor-control feedback loops in a single chip.
Typical applications include industrial sensor interfaces, automotive body and HVAC control, appliance control panels, low-power remote sensor nodes, USB/serial bridging using the USART, and small motor drivers via CCP/PWM. The wide 2.0V-5.5V operating range also makes it attractive for portable battery-powered products.
When designing with this part, place decoupling capacitors (100 nF and 10 uF) within 5 mm of VDD/AVDD, tie MCLR through a 10 kohm pull-up to VDD, and ensure the 28-SOIC footprint accommodates a 300-mil wide-body SO land pattern for proper soldering.
This page consolidates current distributor pricing, drop-in PIC18F alternatives, and practical design notes beyond what the Microchip datasheet alone provides.
드롭인 대체품: PIC18F2523-I/SO — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC18F2523-I/SO (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, RAM, ADC, Communication Peripherals.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC18F2523-E/SO
✅ 드롭인✓ 재고 있음
$5.2 / 개
데이터시트 보기 →PIC18F2520-I/SO
✅ 드롭인✓ 재고 있음
$4.65 / 개
데이터시트 보기 →PIC18F2423-E/SO
✅ 드롭인✓ 재고 있음
$4.42 / 개
데이터시트 보기 →PIC18F2520-E/SO
✅ 드롭인✓ 재고 있음
$4.36 / 개
데이터시트 보기 →PIC18F2420-I/SO
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC18F2523-I/SO 최대 정격 & 전기적 특성
| Core Architecture | PIC18 (8-bit RISC, 16-bit instruction word) |
| CPU Speed | 40 MHz (up to 10 MIPS, 200 ns instruction cycle) |
| Program Flash Memory | 32 KB (16K x 16) |
| RAM | 1536 bytes |
| EEPROM | 256 bytes |
| I/O Pins | 25 |
| A/D Converter | 10-channel, 12-bit |
| Comparators | 2 |
| CCP Modules | 2 CCP + 1 ECCP |
| Communication Peripherals | 1x USART (LIN), 1x MSSP (SPI / I2C) |
| Internal Oscillator | 31 kHz to 8 MHz; up to 32 MHz with 4X PLL |
| 공급 전압 | 2.0 V to 5.5 V |
| 동작 온도 | -40 C to +85 C (industrial, 'I' suffix) |
| 패키지 | 28-pin SOIC (SO), 300-mil wide-body |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
PIC18F2523-I/SO 핀 구성
| 핀 1 | MCLR/RE3 — Master Clear (reset) input or digital input RE3 |
| 핀 2 | RA0/AN0 — Digital I/O RA0 / analog input AN0 |
| 핀 3 | RA1/AN1 — Digital I/O RA1 / analog input AN1 |
| 핀 4 | RA2/AN2/VREF- — Digital I/O RA2 / analog AN2 / negative reference |
| 핀 5 | RA3/AN3/VREF+ — Digital I/O RA3 / analog AN3 / positive reference |
| 핀 6 | RA4/T0CKI — Digital I/O RA4 / Timer0 clock input |
| 핀 7 | RA5/AN4/SS — Digital I/O RA5 / analog AN4 / SPI slave select |
| 핀 8 | VSS — Ground reference |
| 핀 9 | OSC1/RA7 — Crystal oscillator input / digital I/O RA7 |
| 핀 10 | OSC2/RA6 — Crystal oscillator output / digital I/O RA6 |
| 핀 11 | RC0/T1OSO/T1CKI — Digital I/O RC0 / Timer1 oscillator output / clock input |
| 핀 12 | RC1/T1OSI/CCP2 — Digital I/O RC1 / Timer1 oscillator input / CCP2 output |
| 핀 13 | RC2/CCP1 — Digital I/O RC2 / CCP1 PWM output |
| 핀 14 | RC3/SCK/SCL — Digital I/O RC3 / SPI clock / I2C clock |
| 핀 15 | RC4/SDI/SDA — Digital I/O RC4 / SPI data in / I2C data |
| 핀 16 | RC5/SDO — Digital I/O RC5 / SPI data out |
| 핀 17 | RC6/TX/CK — Digital I/O RC6 / USART TX / clock |
| 핀 18 | RC7/RX/DT — Digital I/O RC7 / USART RX / data |
| 핀 19 | VSS — Ground reference (second pin) |
| 핀 20 | VDD — Positive supply (2.0 V to 5.5 V) |
| 핀 21 | RB0/INT0/FLT0 — Digital I/O RB0 / external interrupt 0 / PWM fault input |
| 핀 22 | RB1/INT1 — Digital I/O RB1 / external interrupt 1 |
| 핀 23 | RB2/INT2 — Digital I/O RB2 / external interrupt 2 |
| 핀 24 | RB3/CCP2 — Digital I/O RB3 / CCP2 output (alternate) |
| 핀 25 | RB4 — Digital I/O RB4 (interrupt-on-change) |
| 핀 26 | RB5 — Digital I/O RB5 (interrupt-on-change) |
| 핀 27 | RB6/PGC — Digital I/O RB6 / ICSP clock |
| 핀 28 | RB7/PGD — Digital I/O RB7 / ICSP data |
일반적인 애플리케이션
PIC18F2523-I/SO 적합 용도: 6 애플리케이션s: Industrial Sensor Interface Module, Automotive Body and HVAC Control, Appliance Control Panels, Portable Battery-Powered Sensor Nodes, Small Motor Control (BLDC / Stepper), USB/Serial Bridging and Embedded Gateways.
Industrial Sensor Interface Module
The PIC18F2523-I/SO fits industrial sensor-interface modules because its 10-channel 12-bit ADC and 32 KB flash provide enough code space for linearization, calibration tables, and Modbus or LIN protocol stacks. The 2.0 V-5.5 V supply supports 3.3 V and 5 V analog front-ends, while the 25 I/O lines directly drive optocouplers, relays, and isolated 4-20 mA loops. Internal oscillator accuracy is sufficient for UART-based fieldbuses; for tighter protocols an external crystal can be added. nanoWatt modes let the device enter sleep between sensor reads, dropping current to microamp levels for energy-harvesting nodes.
추천
Automotive Body and HVAC Control
In automotive body controllers and HVAC panels, the PIC18F2523-I/SO provides LIN-bus communication via the integrated USART, 12-bit ADC for temperature and blend-door position sensing, and ECCP PWM for fan and motor drive. The 40 MHz core handles control loops for actuators and supports CAN emulation via SPI-to-CAN bridges if needed. The 28-SOIC package is well-suited for through-hole or SMT modules inside dashboard assemblies, and the industrial -40 C to +85 C range covers cabin electronics. Compared with 5 V-only predecessors, the 2.0 V-5.5 V range also tolerates cranking transients when paired with a TVS diode.
추천
Appliance Control Panels
The PIC18F2523-I/SO is a strong fit for washing-machine, dishwasher, and oven control boards because its 25 I/O pins directly scan keypads, drive triac-zero-cross circuits, and read temperature sensors via the 12-bit ADC. The 1536-byte RAM and 32 KB flash comfortably host segmented LCD drivers, EEPROM-backed user settings, and fault-history logs. The MSSP peripheral handles SPI displays or I2C EEPROM expansion. nanoWatt idle modes minimize standby power, helping appliances meet energy-star ratings. The wide 2.0 V-5.5 V range tolerates rectified mains ripple in transformer-less power supplies.
추천
Portable Battery-Powered Sensor Nodes
For battery-powered wireless sensor nodes, the PIC18F2523-I/SO's nanoWatt technology and 2.0 V minimum supply extend runtime from 2xAA alkaline or Li-coin cells. The 12-bit ADC reads thermistors, photodiodes, or strain gauges with sufficient resolution for environmental monitoring, while the internal 31 kHz to 8 MHz oscillator eliminates the need for external crystals, reducing BOM cost. Sleep current in the nanoamp range and fast wake-up via WDT or interrupt-on-change make it ideal for duty-cycled IoT edge devices that wake briefly to measure and transmit.
추천
Small Motor Control (BLDC / Stepper)
The PIC18F2523-I/SO drives small BLDC and stepper motors using its Enhanced CCP (ECCP) module for complementary PWM outputs with programmable dead-band and fault input. The 12-bit ADC samples back-EMF or current-sense amplifiers for sensorless commutation, while the 40 MHz core executes Field-Oriented Control loops within the required PWM period. Hardware quadrature encoder interface (via CCP) supports closed-loop position control. The 28-SOIC footprint fits compact motor-driver PCBs alongside gate drivers such as the MCP14 family.
추천
USB/Serial Bridging and Embedded Gateways
The PIC18F2523-I/SO serves as a USB-to-UART or USB-to-I2C/SPI bridge for embedded gateways, using the integrated USART and MSSP peripherals plus an external USB-serial converter such as the MCP2200 or MCP2210. The 32 KB flash hosts lightweight TCP/IP or MQTT-over-serial stacks for edge nodes forwarding sensor data to a host processor. ECCP and ADC provide auxiliary analog/digital functions, reducing the need for a secondary MCU. The 2.0 V-5.5 V supply supports direct connection to 3.3 V hosts and 5 V legacy UART equipment.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC18F2523-I/SO — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC18F2523-E/SO | PIC18F2520-I/SO | PIC18F2423-E/SO | PIC18F2520-E/SO | PIC18F2420-I/SO |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SOIC (SO) | 28-SOIC (SO) - same | 28-SOIC (SO) - same | 28-SOIC (SO) - same | 28-SOIC (SO) - same | 28-SOIC (SO) - same |
| Program Flash | 32 KB | 32 KB | 32 KB | 16 KB | 32 KB | 16 KB |
| ADC Resolution | 12-bit (10 ch) | 12-bit (10 ch) | 10-bit (8 ch) | 12-bit (10 ch) | 10-bit (8 ch) | 10-bit (8 ch) |
| RAM | 1536 B | 1536 B | 1536 B | 768 B | 1536 B | 768 B |
| EEPROM | 256 B | 256 B | 256 B | 256 B | 256 B | 256 B |
| Max CPU Speed | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS |
| Operating Temperature | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +125 C | -40 C to +125 C | -40 C to +85 C |
| Supply Voltage | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
주요 차별점
- 12-bit ADC vs 10-bit on legacy PIC18F2520 (vs PIC18F2520-I/SO)
- Industrial -40 C to +85 C standard; E variant extends to +125 C (vs PIC18F2523-E/SO)
- 32 KB flash with ECCP and nanoWatt power management (vs PIC18F2423-E/SO)
설계 노트
Place a 100 nF decoupling capacitor within 5 mm of VDD (pin 20) and a bulk 10 uF aluminum-polymer or ceramic capacitor on the same supply trace. For analog references, add a separate AVDD decoupling network if the application uses the 12-bit ADC at full bandwidth. The 2.0 V minimum supply enables direct Li-coin cell operation, but peak CPU clock must be derated to 4 MHz below 4.2 V per the PIC18 voltage-frequency curve.
Use a 300-mil wide-body SOIC land pattern (SOIJ-style footprint compatible) with exposed pad not required for the 28-pin variant. Keep the crystal traces short and guard them with a ground ring; the internal oscillator eliminates the crystal if 2 percent frequency accuracy is acceptable for UART baud rates. Reserve a 6-pin header or Tag-Connect footprint for ICSP using RB6/PGC and RB7/PGD so the board can be re-programmed in-circuit.
Do not leave MCLR floating - tie it through a 10 kohm pull-up to VDD to prevent spurious resets. When migrating from PIC18F2520 to PIC18F2523, the ADC initialization sequence must be updated because the 12-bit converter adds a longer acquisition time. Code exceeding 16 KB will not fit on the PIC18F2423 family and must be split or recompiled before migrating down. Avoid driving CCP outputs above their 25 mA source/sink rating without a buffer MOSFET.
At 40 MHz and 5 V the PIC18F2523-I/SO consumes approximately 11 mA active and below 1 uA in sleep. Estimated: at 25 C ambient in still air, the 28-SOIC package self-heats by less than 5 C under full-load MCU activity, well below the 150 C junction limit. No external heatsink is required for typical embedded workloads, but the copper pour around VDD/VSS should be maximized to reduce theta_JA.
규정 준수 정보
RoHS compliant per FindMyChip and Microchip product page. Not AEC-Q100 qualified; PIC18F2523-I/SO is industrial grade (-40C to +85C). For AEC-Q100 needs, Microchip offers automotive-grade variants such as PIC18F2523-I/SO under specific part numbers - consult Microchip automotive product line.
