PIC18F45Q10-I/P - 32KB Flash 8-bit MCU 64MHz 40-PDIP | Microchip
부품 번호: PIC18F45Q10-I/P ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.3 | $3.30 |
| 10 | $2.97 | $29.70 |
| 100 | $2.66 | $266.00 |
| 500 | $2.4 | $1,200.00 |
| 1,000 | $2.15 | $2,150.00 |
PIC18F45Q10-I/P 개요
The PIC18F45Q10 belongs to the PIC18 family of 8-bit microcontrollers (MCUs) within Microchip's broader PIC® architecture hierarchy. An 8-bit MCU executes instructions on 8-bit data paths and is the workhorse of embedded control for cost-sensitive, deterministic real-time applications. PIC18 devices extend the baseline and mid-range PIC cores with 16-bit instructions, hardware multiplier, and C-optimized architecture, enabling efficient high-level language development while retaining deterministic interrupt response.
Key features of this part include a 64 MHz internal oscillator, up to 64 MHz CPU clock with 4x PLL option, 35 instruction set, 10-bit ADC with Computation (ADCC) automating averaging and threshold comparison, 5-bit DAC, 2 analog comparators with selectable hysteresis, Configurable Logic Cells (CLC) for hardware state-machine peripherals, Complementary Waveform Generator (CWG), and Peripheral Pin Select (PPS) for flexible signal routing. Functional Safety (FuSa) diagnostics make it suitable for IEC 61508 SIL-2 capable designs when used with the supporting FMEDA and diagnostic libraries.
Typical applications include industrial sensor nodes, household appliances, motor control, lighting ballasts, IoT edge nodes, automotive body and chassis subsystems, HVAC controllers, and any real-time control loop where deterministic behavior, low power, and 5V noise immunity are required. The 32KB Flash supports moderate firmware footprints typical of connected sensor firmware with protocol stacks.
When designing with this device, allocate sufficient decoupling (100 nF + 1 µF near each supply pin), use the ICSP™ header for in-circuit programming, and follow Microchip AN1255 for Class B / IEC 60730 safety diagnostics on white goods. The wide 2.3V-5.5V VDD range supports both 3.3V and 5V systems, but power-on reset thresholds differ at each range.
드롭인 대체품: PIC18F45Q10-I/P — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC18F45Q10-I/P (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, Core Architecture, Mounting Type, Program Memory (Flash).
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC18F46Q10-I/P
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC18F45Q10-I/MP
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.78 / 개
데이터시트 보기 →PIC18F46K22-I/P
✅ 드롭인✓ 재고 있음
$2.61 / 개
데이터시트 보기 →PIC18F45K22-I/P
✅ 드롭인✓ 재고 있음
$2.1 / 개
데이터시트 보기 →PIC18F46K20-I/P
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC18F4520-I/P
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$5.35 / 개
데이터시트 보기 →PIC18F45Q10-I/P 최대 정격 & 전기적 특성
| Core Architecture | PIC18 8-bit RISC |
| Program Memory (Flash) | 32 KB (32K x 8) |
| Data SRAM | 2 KB |
| Data EEPROM | 1 KB |
| Maximum CPU Frequency | 64 MHz |
| Operating Voltage Range | 2.3 V to 5.5 V |
| I/O Pins | 36 |
| ADC | 10-bit, up to 35 channels with ADCC |
| DAC | 5-bit, 2 outputs |
| Comparators | 2 with selectable hysteresis |
| Timers | 8-/16-bit, multiple CCP/ECCP |
| Communication | UART, SPI, I2C (with PPS) |
| Peripheral Pin Select (PPS) | Yes |
| Configurable Logic Cells (CLC) | Yes |
| Complementary Waveform Generator (CWG) | Yes |
| Functional Safety (FuSa) | Yes |
| 동작 온도 범위 | -40C to +85C (Industrial) |
| 패키지 | 40-pin PDIP (0.600 in / 15.24 mm) |
| 실장 유형 | Through-Hole |
| RoHS 상태 | Compliant |
PIC18F45Q10-I/P 핀 구성
| 핀 1 | RE3/MCLR — Master Clear (reset) input or digital input only |
| 핀 2 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| 핀 3 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| 핀 4 | RA2/AN2 — PORTA bit 2 / analog input 2 |
| 핀 5 | RA3/AN3 — PORTA bit 3 / analog input 3 / Vref+ |
| 핀 6 | RA4/AN4 — PORTA bit 4 / analog input 4 |
| 핀 7 | RA5/AN5 — PORTA bit 5 / analog input 5 |
| 핀 8 | RE0/AN6 — PORTE bit 0 / analog input 6 |
| 핀 9 | RE1/AN7 — PORTE bit 1 / analog input 7 |
| 핀 10 | RE2/AN8 — PORTE bit 2 / analog input 8 |
| 핀 11 | VDD — Positive supply voltage (2.3V-5.5V) |
| 핀 12 | VSS — Ground reference |
| 핀 13 | RA7/OSC1 — PORTA bit 7 / crystal oscillator input |
| 핀 14 | RA6/OSC2 — PORTA bit 6 / crystal oscillator output |
| 핀 15 | RC0/SOSC1 — PORTC bit 0 / secondary oscillator input |
| 핀 16 | RC1/SOSC2 — PORTC bit 1 / secondary oscillator output |
| 핀 17 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| 핀 18 | RC3/SCL1 — PORTC bit 3 / I2C clock |
| 핀 19 | RD0 — PORTD bit 0 |
| 핀 20 | RD1 — PORTD bit 1 |
| 핀 21 | RD2 — PORTD bit 2 |
| 핀 22 | RD3 — PORTD bit 3 |
| 핀 23 | RC4/SDA1 — PORTC bit 4 / I2C data |
| 핀 24 | RC5 — PORTC bit 5 |
| 핀 25 | RC6 — PORTC bit 6 |
| 핀 26 | RC7 — PORTC bit 7 |
| 핀 27 | RD4 — PORTD bit 4 |
| 핀 28 | RD5 — PORTD bit 5 |
| 핀 29 | RD6 — PORTD bit 6 |
| 핀 30 | RD7 — PORTD bit 7 |
| 핀 31 | VSS — Ground reference |
| 핀 32 | VDD — Positive supply voltage (2.3V-5.5V) |
| 핀 33 | RB0/INT — PORTB bit 0 / external interrupt |
| 핀 34 | RB1 — PORTB bit 1 |
| 핀 35 | RB2 — PORTB bit 2 |
| 핀 36 | RB3 — PORTB bit 3 |
| 핀 37 | RB4 — PORTB bit 4 |
| 핀 38 | RB5 — PORTB bit 5 |
| 핀 39 | RB6/PGC — PORTB bit 6 / ICSP clock |
| 핀 40 | RB7/PGD — PORTB bit 7 / ICSP data |
일반적인 애플리케이션
PIC18F45Q10-I/P 적합 용도: 6 애플리케이션s: Industrial Sensor Nodes, Household Appliance Control, HVAC and Building Automation Controllers, Automotive Body and Chassis Modules, Motor Control and BLDC Fan Drivers, IoT Edge Nodes and Connected Sensors.
Industrial Sensor Nodes
The PIC18F45Q10-I/P fits industrial sensor nodes because its 5V VDD range and noise-immune I/O tolerate the transients of factory-floor wiring, while the 32 KB Flash and 64 MHz core run deterministic sampling loops. According to the Microchip PIC18F45Q10 family datasheet, the ADCC (10-bit ADC with computation) automates averaging and threshold comparison, offloading repetitive math from the CPU and reducing firmware complexity for thermocouple, RTD, or strain-gauge conditioning firmware.
추천
Household Appliance Control
The PIC18F45Q10-I/P is well suited to washing machines, dishwashers, and microwave ovens thanks to its FuSa (Functional Safety) diagnostics, IEC 60730 class-B support libraries, and 5V noise immunity. The CWG and ECCP modules generate complementary PWM for triac or IGBT-based motor drive, while the 32 KB Flash holds the appliance state machine plus UI logic.
추천
HVAC and Building Automation Controllers
For HVAC thermostats, damper actuators, and VAV box controllers, the PIC18F45Q10-I/P provides 64 MIPS deterministic control with PPS-based flexible I/O mapping that simplifies PCB routing. The CLC (Configurable Logic Cells) implement hardware state machines for sensor-debounce or PWM edge shaping without burdening the CPU. The wide 2.3V-5.5V supply range allows direct operation from a rectified 24VAC transformer rail.
추천
Automotive Body and Chassis Modules
The PIC18F45Q10-I/P targets low-end body-electronics nodes like seat controllers, mirror adjusters, RKE receivers, and lighting ballasts where 8-bit cost efficiency is critical. Its 5V-tolerant I/O interfaces directly to LIN or CAN physical layers, and the ADCC performs wheel-speed or ambient-light sensing in hardware. For AEC-Q100 automotive qualification, select the automotive-grade variant of the same die.
추천
Motor Control and BLDC Fan Drivers
For BLDC or PMSM motor control in fans, pumps, and small appliances, the PIC18F45Q10-I/P delivers 64 MHz core plus the CWG and ECCP peripherals needed for sensorless or Hall-sensor trapezoidal commutation. The 32 KB Flash fits sensored FOC libraries for low-speed precision, and the 10-bit ADC with computation samples back-EMF in hardware, enabling quieter commutation. The 36 I/O functional from the 40-pin PDIP is sufficient for 3-phase gate drive plus HMI inputs.
추천
IoT Edge Nodes and Connected Sensors
IoT edge nodes benefit from the PIC18F45Q10-I/P's XLP (eXtreme Low Power) modes, 5V noise immunity, and 32 KB Flash sufficient for small MQTT-SN or CoAP stacks. PPS allows UART/SPI/I2C peripherals to be remapped to any I/O pin, simplifying PCB routing when integrating Wi-Fi or LoRa modules. The on-chip ADCC performs sensor conditioning with zero CPU overhead, extending battery life in battery-powered edge deployments.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC18F45Q10-I/P — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC18F46Q10-I/P | PIC18F46K22-I/P | PIC18F45K22-I/P | PIC18F4520-I/P |
|---|---|---|---|---|---|
| Package | 40-PDIP (0.600 in) | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 64 KB (+100%) | 64 KB (+100%) | 32 KB (same) | 32 KB (same) |
| SRAM | 2 KB | 2 KB (same) | 3 KB (+50%) | 1.5 KB (-25%) | 1.5 KB (-25%) |
| CPU Speed | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS (same) | 64 MHz / 16 MIPS (same) | 64 MHz / 16 MIPS (same) | 40 MHz / 10 MIPS (-37%) |
| ADC | 10-bit ADCC | 10-bit ADCC (same) | 10-bit ADC (no ADCC) | 10-bit ADC (no ADCC) | 10-bit ADC (no ADCC) |
| CLC / CWG | Yes | Yes (same) | No | No | No |
| Functional Safety (FuSa) | Yes | Yes (same) | No | No | No |
| Approx Unit Price (qty-1) | $3.30 | $3.80 (+15%) | $5.00 (+51%) | $4.50 (+36%) | $4.20 (+27%) |
주요 차별점
- Functional Safety (FuSa) diagnostics built in (vs PIC18F45K22-I/P)
- ADCC hardware averaging offloads CPU (vs PIC18F4520-I/P)
- CLC + CWG add programmable peripherals (vs PIC18F45K22-I/P)
설계 노트
Place a 100 nF ceramic decoupling capacitor within 5 mm of each VDD pin (pins 11 and 32) and a bulk 1 µF-10 µF tantalum or ceramic capacitor near the device. The PIC18F45Q10-I/P has two VDD pins; both must be decoupled to suppress switching noise from the internal oscillator and CWG/ECCP peripherals.
Do not leave the MCLR pin (pin 1) floating. Per the PIC18F45Q10 datasheet, MCLR must be tied to VDD through a 10 kΩ resistor (or driven by the supervisor) for reliable reset. Floating MCLR causes erratic resets in noisy industrial environments. Configure the MCLRE configuration bit to disable internal MCLR only when an external supervisor is present.
Estimated: at 64 MHz, 5V supply, full I/O load (~36 mA), and 50% I/O toggling, internal dissipation stays under 200 mW. The 40-PDIP package handles this comfortably without heatsinking. In high-temperature industrial enclosures (>70°C ambient), verify that the -40C to +85C industrial rating covers your worst-case ambient plus self-heating.
Route the ICSP clock (PGC, pin 39) and ICSP data (PGD, pin 40) lines with ground shielding or keep them short to prevent programming errors. Use a 5-pin header (VDD, VSS, PGC, PGD, MCLR) placed on the board edge for production programming access; this avoids the need for socket removal in manufacturing.
When using the ADC for precision measurements, place a 100 nF ceramic on the Vref+ pin (RA3) and avoid switching digital signals near AVDD/AVSS. Use PPS to remap high-frequency PWM (ECCP/CWG) to PORTB or PORTD pins away from analog inputs to reduce crosstalk below 1 LSB on the 10-bit ADC.
규정 준수 정보
Industrial temperature grade (-40C to +85C) per -I suffix. Not AEC-Q100 qualified - automotive applications should select the automotive grade variant of the same die. RoHS compliant per Microchip product declaration.
