PIC18F45Q10-I/P - 32KB Flash 8-bit MCU 64MHz 40-PDIP | Microchip
Артикул: PIC18F45Q10-I/P ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.3 | $3,30 |
| 10 | $2.97 | $29,70 |
| 100 | $2.66 | $266,00 |
| 500 | $2.4 | $1.200,00 |
| 1.000 | $2.15 | $2.150,00 |
PIC18F45Q10-I/P Обзор
The PIC18F45Q10 belongs to the PIC18 family of 8-bit microcontrollers (MCUs) within Microchip's broader PIC® architecture hierarchy. An 8-bit MCU executes instructions on 8-bit data paths and is the workhorse of embedded control for cost-sensitive, deterministic real-time applications. PIC18 devices extend the baseline and mid-range PIC cores with 16-bit instructions, hardware multiplier, and C-optimized architecture, enabling efficient high-level language development while retaining deterministic interrupt response.
Key features of this part include a 64 MHz internal oscillator, up to 64 MHz CPU clock with 4x PLL option, 35 instruction set, 10-bit ADC with Computation (ADCC) automating averaging and threshold comparison, 5-bit DAC, 2 analog comparators with selectable hysteresis, Configurable Logic Cells (CLC) for hardware state-machine peripherals, Complementary Waveform Generator (CWG), and Peripheral Pin Select (PPS) for flexible signal routing. Functional Safety (FuSa) diagnostics make it suitable for IEC 61508 SIL-2 capable designs when used with the supporting FMEDA and diagnostic libraries.
Typical applications include industrial sensor nodes, household appliances, motor control, lighting ballasts, IoT edge nodes, automotive body and chassis subsystems, HVAC controllers, and any real-time control loop where deterministic behavior, low power, and 5V noise immunity are required. The 32KB Flash supports moderate firmware footprints typical of connected sensor firmware with protocol stacks.
When designing with this device, allocate sufficient decoupling (100 nF + 1 µF near each supply pin), use the ICSP™ header for in-circuit programming, and follow Microchip AN1255 for Class B / IEC 60730 safety diagnostics on white goods. The wide 2.3V-5.5V VDD range supports both 3.3V and 5V systems, but power-on reset thresholds differ at each range.
Аналоги без доработки для PIC18F45Q10-I/P — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18F45Q10-I/P (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Core Architecture, Mounting Type, Program Memory (Flash).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18F46Q10-I/P
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC18F45Q10-I/MP
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.78 / шт.
Открыть даташит →PIC18F46K22-I/P
✅ Прямая замена✓ В наличии
$2.61 / шт.
Открыть даташит →PIC18F45K22-I/P
✅ Прямая замена✓ В наличии
$2.1 / шт.
Открыть даташит →PIC18F46K20-I/P
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC18F4520-I/P
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$5.35 / шт.
Открыть даташит →PIC18F45Q10-I/P Максимальные параметры и электрические характеристики
| Core Architecture | PIC18 8-bit RISC |
| Program Memory (Flash) | 32 KB (32K x 8) |
| Data SRAM | 2 KB |
| Data EEPROM | 1 KB |
| Maximum CPU Frequency | 64 MHz |
| Operating Voltage Range | 2.3 V to 5.5 V |
| I/O Pins | 36 |
| ADC | 10-bit, up to 35 channels with ADCC |
| DAC | 5-bit, 2 outputs |
| Comparators | 2 with selectable hysteresis |
| Timers | 8-/16-bit, multiple CCP/ECCP |
| Communication | UART, SPI, I2C (with PPS) |
| Peripheral Pin Select (PPS) | Yes |
| Configurable Logic Cells (CLC) | Yes |
| Complementary Waveform Generator (CWG) | Yes |
| Functional Safety (FuSa) | Yes |
| Диапазон рабочих температур | -40C to +85C (Industrial) |
| Корпус | 40-pin PDIP (0.600 in / 15.24 mm) |
| Тип монтажа | Through-Hole |
| Статус RoHS | Compliant |
Конфигурация выводов PIC18F45Q10-I/P
| Контакт 1 | RE3/MCLR — Master Clear (reset) input or digital input only |
| Контакт 2 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| Контакт 3 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| Контакт 4 | RA2/AN2 — PORTA bit 2 / analog input 2 |
| Контакт 5 | RA3/AN3 — PORTA bit 3 / analog input 3 / Vref+ |
| Контакт 6 | RA4/AN4 — PORTA bit 4 / analog input 4 |
| Контакт 7 | RA5/AN5 — PORTA bit 5 / analog input 5 |
| Контакт 8 | RE0/AN6 — PORTE bit 0 / analog input 6 |
| Контакт 9 | RE1/AN7 — PORTE bit 1 / analog input 7 |
| Контакт 10 | RE2/AN8 — PORTE bit 2 / analog input 8 |
| Контакт 11 | VDD — Positive supply voltage (2.3V-5.5V) |
| Контакт 12 | VSS — Ground reference |
| Контакт 13 | RA7/OSC1 — PORTA bit 7 / crystal oscillator input |
| Контакт 14 | RA6/OSC2 — PORTA bit 6 / crystal oscillator output |
| Контакт 15 | RC0/SOSC1 — PORTC bit 0 / secondary oscillator input |
| Контакт 16 | RC1/SOSC2 — PORTC bit 1 / secondary oscillator output |
| Контакт 17 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| Контакт 18 | RC3/SCL1 — PORTC bit 3 / I2C clock |
| Контакт 19 | RD0 — PORTD bit 0 |
| Контакт 20 | RD1 — PORTD bit 1 |
| Контакт 21 | RD2 — PORTD bit 2 |
| Контакт 22 | RD3 — PORTD bit 3 |
| Контакт 23 | RC4/SDA1 — PORTC bit 4 / I2C data |
| Контакт 24 | RC5 — PORTC bit 5 |
| Контакт 25 | RC6 — PORTC bit 6 |
| Контакт 26 | RC7 — PORTC bit 7 |
| Контакт 27 | RD4 — PORTD bit 4 |
| Контакт 28 | RD5 — PORTD bit 5 |
| Контакт 29 | RD6 — PORTD bit 6 |
| Контакт 30 | RD7 — PORTD bit 7 |
| Контакт 31 | VSS — Ground reference |
| Контакт 32 | VDD — Positive supply voltage (2.3V-5.5V) |
| Контакт 33 | RB0/INT — PORTB bit 0 / external interrupt |
| Контакт 34 | RB1 — PORTB bit 1 |
| Контакт 35 | RB2 — PORTB bit 2 |
| Контакт 36 | RB3 — PORTB bit 3 |
| Контакт 37 | RB4 — PORTB bit 4 |
| Контакт 38 | RB5 — PORTB bit 5 |
| Контакт 39 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Контакт 40 | RB7/PGD — PORTB bit 7 / ICSP data |
Типичное применение
PIC18F45Q10-I/P подходит для 6 применениеs: Industrial Sensor Nodes, Household Appliance Control, HVAC and Building Automation Controllers, Automotive Body and Chassis Modules, Motor Control and BLDC Fan Drivers, IoT Edge Nodes and Connected Sensors.
Industrial Sensor Nodes
The PIC18F45Q10-I/P fits industrial sensor nodes because its 5V VDD range and noise-immune I/O tolerate the transients of factory-floor wiring, while the 32 KB Flash and 64 MHz core run deterministic sampling loops. According to the Microchip PIC18F45Q10 family datasheet, the ADCC (10-bit ADC with computation) automates averaging and threshold comparison, offloading repetitive math from the CPU and reducing firmware complexity for thermocouple, RTD, or strain-gauge conditioning firmware.
Рекомендуется
Household Appliance Control
The PIC18F45Q10-I/P is well suited to washing machines, dishwashers, and microwave ovens thanks to its FuSa (Functional Safety) diagnostics, IEC 60730 class-B support libraries, and 5V noise immunity. The CWG and ECCP modules generate complementary PWM for triac or IGBT-based motor drive, while the 32 KB Flash holds the appliance state machine plus UI logic.
Рекомендуется
HVAC and Building Automation Controllers
For HVAC thermostats, damper actuators, and VAV box controllers, the PIC18F45Q10-I/P provides 64 MIPS deterministic control with PPS-based flexible I/O mapping that simplifies PCB routing. The CLC (Configurable Logic Cells) implement hardware state machines for sensor-debounce or PWM edge shaping without burdening the CPU. The wide 2.3V-5.5V supply range allows direct operation from a rectified 24VAC transformer rail.
Рекомендуется
Automotive Body and Chassis Modules
The PIC18F45Q10-I/P targets low-end body-electronics nodes like seat controllers, mirror adjusters, RKE receivers, and lighting ballasts where 8-bit cost efficiency is critical. Its 5V-tolerant I/O interfaces directly to LIN or CAN physical layers, and the ADCC performs wheel-speed or ambient-light sensing in hardware. For AEC-Q100 automotive qualification, select the automotive-grade variant of the same die.
Рекомендуется
Motor Control and BLDC Fan Drivers
For BLDC or PMSM motor control in fans, pumps, and small appliances, the PIC18F45Q10-I/P delivers 64 MHz core plus the CWG and ECCP peripherals needed for sensorless or Hall-sensor trapezoidal commutation. The 32 KB Flash fits sensored FOC libraries for low-speed precision, and the 10-bit ADC with computation samples back-EMF in hardware, enabling quieter commutation. The 36 I/O functional from the 40-pin PDIP is sufficient for 3-phase gate drive plus HMI inputs.
Рекомендуется
IoT Edge Nodes and Connected Sensors
IoT edge nodes benefit from the PIC18F45Q10-I/P's XLP (eXtreme Low Power) modes, 5V noise immunity, and 32 KB Flash sufficient for small MQTT-SN or CoAP stacks. PPS allows UART/SPI/I2C peripherals to be remapped to any I/O pin, simplifying PCB routing when integrating Wi-Fi or LoRa modules. The on-chip ADCC performs sensor conditioning with zero CPU overhead, extending battery life in battery-powered edge deployments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18F45Q10-I/P — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18F46Q10-I/P | PIC18F46K22-I/P | PIC18F45K22-I/P | PIC18F4520-I/P |
|---|---|---|---|---|---|
| Package | 40-PDIP (0.600 in) | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 64 KB (+100%) | 64 KB (+100%) | 32 KB (same) | 32 KB (same) |
| SRAM | 2 KB | 2 KB (same) | 3 KB (+50%) | 1.5 KB (-25%) | 1.5 KB (-25%) |
| CPU Speed | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS (same) | 64 MHz / 16 MIPS (same) | 64 MHz / 16 MIPS (same) | 40 MHz / 10 MIPS (-37%) |
| ADC | 10-bit ADCC | 10-bit ADCC (same) | 10-bit ADC (no ADCC) | 10-bit ADC (no ADCC) | 10-bit ADC (no ADCC) |
| CLC / CWG | Yes | Yes (same) | No | No | No |
| Functional Safety (FuSa) | Yes | Yes (same) | No | No | No |
| Approx Unit Price (qty-1) | $3.30 | $3.80 (+15%) | $5.00 (+51%) | $4.50 (+36%) | $4.20 (+27%) |
Ключевые отличия
- Functional Safety (FuSa) diagnostics built in (против PIC18F45K22-I/P)
- ADCC hardware averaging offloads CPU (против PIC18F4520-I/P)
- CLC + CWG add programmable peripherals (против PIC18F45K22-I/P)
Заметки по проектированию
Place a 100 nF ceramic decoupling capacitor within 5 mm of each VDD pin (pins 11 and 32) and a bulk 1 µF-10 µF tantalum or ceramic capacitor near the device. The PIC18F45Q10-I/P has two VDD pins; both must be decoupled to suppress switching noise from the internal oscillator and CWG/ECCP peripherals.
Do not leave the MCLR pin (pin 1) floating. Per the PIC18F45Q10 datasheet, MCLR must be tied to VDD through a 10 kΩ resistor (or driven by the supervisor) for reliable reset. Floating MCLR causes erratic resets in noisy industrial environments. Configure the MCLRE configuration bit to disable internal MCLR only when an external supervisor is present.
Estimated: at 64 MHz, 5V supply, full I/O load (~36 mA), and 50% I/O toggling, internal dissipation stays under 200 mW. The 40-PDIP package handles this comfortably without heatsinking. In high-temperature industrial enclosures (>70°C ambient), verify that the -40C to +85C industrial rating covers your worst-case ambient plus self-heating.
Route the ICSP clock (PGC, pin 39) and ICSP data (PGD, pin 40) lines with ground shielding or keep them short to prevent programming errors. Use a 5-pin header (VDD, VSS, PGC, PGD, MCLR) placed on the board edge for production programming access; this avoids the need for socket removal in manufacturing.
When using the ADC for precision measurements, place a 100 nF ceramic on the Vref+ pin (RA3) and avoid switching digital signals near AVDD/AVSS. Use PPS to remap high-frequency PWM (ECCP/CWG) to PORTB or PORTD pins away from analog inputs to reduce crosstalk below 1 LSB on the 10-bit ADC.
Информация о соответствии
Industrial temperature grade (-40C to +85C) per -I suffix. Not AEC-Q100 qualified - automotive applications should select the automotive grade variant of the same die. RoHS compliant per Microchip product declaration.
