PIC18F8723-I/PT - 8-Bit 40MHz 128KB Flash MCU | Microchip 80-TQFP
부품 번호: PIC18F8723-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $12.33 | $12.33 |
| 10 | $11.1 | $111.00 |
| 100 | $9.75 | $975.00 |
| 500 | $8.8 | $4,400.00 |
| 1,000 | $7.95 | $7,950.00 |
PIC18F8723-I/PT 개요
What is a PIC 8-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash program, SRAM data, optional EEPROM), and peripherals on one die to serve as the brain of an embedded system. The PIC18F family sits in the performance tier of Microchip's 8-bit PIC architecture, sitting between baseline PIC10/12/16/17 parts and the 16-bit dsPIC/PIC24 families in the broader 8-bit-vs-32-bit MCU hierarchy.
Key features include 75 instruction set operations, an 8 x 8 hardware multiplier, three 16-bit timers (Timer0/1/2/3/5 equivalents), two Capture/Compare/PWM modules, 70 interrupt sources with an 8-level hardware priority scheme, and a 32 kHz secondary oscillator for low-power RTCC operation. The 80-TQFP footprint exposes ample I/O - 70 I/O lines, of which up to 12 share analog input channels.
Typical applications include industrial control panels, large low-power connected appliances, automotive body/comfort LIN nodes, USB/serial bridges, data-logger front-ends, and graphics-capable human-machine interfaces. The 128 KB Flash and 4 KB RAM also suit Chinese-character and multi-language LCD UI stacks.
When designing with this device, note that the 'I' suffix denotes the industrial temperature range (-40C to +85C), while the 'F' suffix is required for automotive-grade (AEC-Q100) qualification; always verify the package suffix vs the application's environmental target. Bulk erase time and Flash endurance (typically 100K cycles) should also be considered when planning firmware update strategies.
드롭인 대체품: PIC18F8723-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC18F8723-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Core Architecture, Timers, I/O Pins.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC18F8723T-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC18F8722-I/PT
✅ 드롭인✓ 재고 있음
$6.5 / 개
데이터시트 보기 →PIC18F8627-I/PT
✅ 드롭인✓ 재고 있음
$9.05 / 개
데이터시트 보기 →PIC18F8621-I/PT
✅ 드롭인✓ 재고 있음
$12.4 / 개
데이터시트 보기 →PIC18F8620-E/PT
✅ 드롭인✓ 재고 있음
$6.55 / 개
데이터시트 보기 →PIC18F85K22-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC18F8723-I/PT 최대 정격 & 전기적 특성
| Product Family | PIC18F (8-bit) |
| CPU Core | PIC18 / RISC 8-bit |
| Maximum CPU Frequency | 40 MHz |
| Program Memory (Flash) | 128 KB (64K x 16) |
| SRAM | 4 KB |
| Data EEPROM | 1024 bytes |
| ADC | 12-channel, 10-bit, up to 100 ksps |
| 공급 전압 | 4.2 V to 5.5 V |
| I/O Pins | 70 |
| Timers | 5 x 16-bit (or 8/16-bit configurable) |
| CCP/ECCP Modules | 2 |
| Serial Interfaces | 2 MSSP (I2C/SPI), 2 USART (LIN-capable) |
| Operating Temperature (Industrial) | -40C to +85C |
| 패키지 | 80-TQFP (PT), 12x12 mm |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
PIC18F8723-I/PT 80-tqfp (pt), 12x12 mm 핀 구성 가이드
PIC18F8723-I/PT(80-tqfp (pt), 12x12 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC18F8723-I/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC18F8723-I/PT 적합 용도: 7 애플리케이션s: Industrial Control Panels, Automotive LIN Networked Nodes, Data Acquisition Front-Ends, USB / Serial Bridge Devices, LCD & Graphics Display Drivers, Low-Power Connected Appliance Controllers, Sensor Aggregation Hub.
Industrial Control Panels
The PIC18F8723-I/PT is a strong fit for industrial control panels where multiple human-machine-interface peripherals (keypad, character LCD, status LEDs) and serial fieldbus links must coexist on a single processor. With 70 I/O pins it can drive a 4x4 matrix keypad plus a 16x4 LCD directly, and 128 KB of Flash is enough room for Chinese-character lookup tables needed on multilingual HMIs. Its 12-channel 10-bit ADC handles analog inputs from temperature sensors, pressure transducers and 4-20 mA current loops simultaneously, while the dual USART supports an RS-485 Modbus slave link to a PLC. Estimated power consumption in panel-mount applications stays below 15 mA active / 50 uA sleep, allowing the unit to run from a 24 V industrial rail through a small switching regulator.
추천
Automotive LIN Networked Nodes
Although the PIC18F8723-I/PT itself is industrial-grade, designers prototyping automotive LIN 1.2/2.0 body-comfort nodes can leverage its dual Enhanced USART ports to bridge a LIN master and an auxiliary UART sensor such as a GPS or body controller. Per the Microchip PIC18F8723 datasheet, the EUSART block supports LIN's 13-bit break field and automatic baud-rate detection on the 16-bit Baud Rate Generator. With 4 KB of SRAM and a 32 kHz RTCC domain, the device can stay in low-power sleep while waking on EUSART activity for body-network duty cycles. A migration to the automotive-grade PIC18F86J72-I/PT is straightforward because both share the 80-TQFP footprint and the same PIC18 peripheral set.
추천
Data Acquisition Front-Ends
With 12 analog inputs and a 10-bit ADC capable of 100 ksps, the PIC18F8723-I/PT can act as the analog front-end for multi-channel data loggers, capturing temperature, pressure, vibration, and process variables simultaneously. The 4 KB SRAM buffers burst samples, then the dual MSSP/I2C peripherals push the dataset to an external EEPROM or FRAM for non-volatile storage. Designers can leverage the 16-bit Timer1 to schedule ADC conversions and trigger CCP2 to assert an alarm when a threshold is crossed. Estimated sample throughput is up to 8 ksps sustained when the CPU is also servicing UART commands, enough for vibration loggers and HVAC monitoring systems.
추천
USB / Serial Bridge Devices
The PIC18F8723-I/PT's two USARTs make it a convenient bridge between USB-CDC virtual COM ports and legacy RS-232 peripherals, especially when one EUSART is dedicated to a CP2102-style USB controller while the second talks to a real RS-232 transceiver. 128 KB of Flash is more than enough to host both a full protocol-conversion stack and a small web-server-style configuration UI. Industrial instrumentation readers, weighing scales and POS terminals benefit from this dual-bus topology without needing a dedicated USB-aware microcontroller.
추천
LCD & Graphics Display Drivers
With 128 KB of Flash and 70 I/O pins, the PIC18F8723-I/PT can drive large alphanumeric and dot-matrix LCD/LED panels directly, including 320-segment LCDs and small graphic OLEDs via SPI. The MCU fits printers, weighing scales, and fuel dispensers that need bilingual text or graphical icons. Using the MSSP SPI channel to push frame data plus a parallel 4-bit/8-bit data bus to the panel keeps CPU overhead low. The device's nanoWatt sleep modes are valuable in battery-powered signage that wakes periodically to refresh content.
추천
Low-Power Connected Appliance Controllers
The PIC18F8723-I/PT was designed into the brief of low-power connected appliances, leveraging Microchip's nanoWatt technology to deliver a 32 kHz RTCC domain and multiple power-managed sleep modes. Drawing under 100 nA in deep sleep and a few mA active, the device supports battery-backed appliances such as smart locks, thermostats, and sensorised kitchen appliances where the dual EUSART can drive both a wireless module (over UART) and an appliance-side control bus. With 1024 bytes of EEPROM, designers retain last-state settings across power cycles without external non-volatile memory.
추천
Sensor Aggregation Hub
With four serial peripherals (2x MSSP, 2x EUSART) and 12 analog inputs, the PIC18F8723-I/PT can act as a sensor aggregation hub in environmental monitoring or smart-building systems, fanning in I2C sensors, SPI sensors, RS-485 Modbus devices and analog field sensors in one chassis. 128 KB of Flash supports sensor-fusion firmware and over-the-air updates, while 4 KB of SRAM buffers sample packets before relaying to a higher-level gateway. A 32 kHz secondary oscillator keeps time-stamping accurate even when the CPU is in a low-duty-cycle sleep.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC18F8723-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC18F8723T-I/PT | PIC18F8722-I/PT | PIC18F8627-I/PT | PIC18F8621-I/PT | PIC18F85K22-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-TQFP (PT) 12x12 mm | 80-TQFP (PT) - same | 80-TQFP (PT) - same | 80-TQFP (PT) - same | 80-TQFP (PT) - same | 80-TQFP (PT) - same |
| Program Memory (Flash) | 128 KB | 128 KB | 64 KB (-50%) | 96 KB (-25%) | 64 KB (-50%) | 32 KB (-75%) |
| SRAM | 4 KB | 4 KB | 3.8 KB | 3.8 KB | 3.8 KB | 2 KB (-50%) |
| Data EEPROM | 1024 bytes | 1024 bytes | 1024 bytes | 1024 bytes | 1024 bytes | 256 bytes (-75%) |
| Maximum CPU Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 64 MHz (+60%) |
| ADC Channels | 12 ch, 10-bit | 12 ch, 10-bit | 12 ch, 10-bit | 12 ch, 10-bit | 16 ch, 10-bit (+33%) | 24 ch, 12-bit (+100%) |
| I/O Pins | 70 | 70 | 70 | 70 | 70 | 67 (-4%) |
| AEC-Q100 Automotive Grade | No (Industrial only) | No | No | No | No | Available on -F suffix variant |
| Supply Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 1.8 V to 5.5 V (wider range) |
주요 차별점
- Highest-density Flash in the legacy PIC18F family (vs PIC18F8722-I/PT)
- 12-channel 10-bit ADC with on-chip bandgap reference (vs PIC18F85K22-I/PT)
- Four serial peripherals in a single 80-TQFP (vs PIC18F8621-I/PT)
설계 노트
The PIC18F8723-I/PT operates from 4.2 V to 5.5 V on VDD, which rules out 3.3 V-only rails. Estimated: at 40 MHz CPU, the active current at 5.0 V is approximately 17-20 mA per Microchip's typical curves, so a 5 V 100 mA LDO with 1% regulation is sufficient. Place a 100 nF ceramic bypass cap adjacent to each VDD/VSS pin pair, and add a 10 uF bulk capacitor on the regulator output. For battery-backup domains, drive Vbat from the RTCC battery through a 10 kOhm isolation resistor to avoid backfeed.
The 80-TQFP (PT) package has a thermal resistance theta_JA of approximately 50 C/W on a 4-layer JEDEC test PCB. Estimated: continuous 20 mA active at 5.0 V gives 100 mW dissipation, so at an ambient of 25 C the junction rises only 5 C - well inside the 85 C industrial rating. However, if the device is mounted inside a sealed enclosure or near a hot power stage, derate by adding copper pours under the TQFP body and avoid placing large heat-generating components within 5 mm of the IC.
The PIC18F8723-I/PT uses an internal 16 MHz instruction-cycle oscillator by default but requires ICSP programming mode to operate on factory-default configuration. Common pitfalls: (1) MCLR must be pulled high through a 10 kOhm resistor - never left floating. (2) The two analog reference pins (AVDD/AVSS) must always be connected, even when ADC is unused - floats cause current leakage. (3) Flash endurance is approximately 100K cycles per row - do not use internal Flash for high-write applications; reserve 1 KB EEPROM for that workload.
Place decoupling capacitors as close to each VDD/VSS pair as physically possible - within 1-2 mm trace length to avoid inductance. For the 80-TQFP package, six VDD pins and six VSS pins are arranged around the die; each pair needs its own 100 nF bypass cap plus a 1 uF bulk capacitor on the analog rail (AVDD/AVSS). Crystal traces should be short, symmetric, and routed over a continuous ground plane. If the device is driving long external bus lines (parallel LCD), add 33 Ohm series damping resistors on each data line close to the MCU.
규정 준수 정보
The PIC18F8723-I/PT ('I' suffix denotes industrial -40C to +85C) is RoHS / REACH compliant and lead-free per Microchip's product page. It is not AEC-Q100 qualified - choose the 'F' suffix variant for automotive qualification. Microchip publishes a PMMC (Perfluorocompound) and conflict-mineral CMRT declaration confirming Section 1502 compliance.
