PIC24EP64MC206-I/PT - 70 MIPS 64KB Flash Motor Control MCU | Microchip
부품 번호: PIC24EP64MC206-I/PT ✓ 활성PIC24EP64MC206-I/PT 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O and dedicated peripherals on one device. The PIC24E belongs to the 16-bit microcontroller family within the broader embedded-control and power-management ecosystem. Its motor-control feature set combines high-speed switching functions with analog signal conditioning, reducing the number of external components required in compact motor-control systems.
The PIC24EP64MC206-I/PT provides 83 I/O ports, Flash memory and an 8-bit data-bus interface. Its high-speed PWM hardware is suited to electronic commutation, field-oriented control and other timing-sensitive algorithms. Three integrated operational amplifiers and four comparators support current sensing, control-loop conditioning and protection. The integrated motor-control peripherals can improve responsiveness by placing measurement and switching functions close to the processor core.
The 64-pin TQFP package measures 10 mm by 10 mm and has a stated body height of 1.10 mm. This surface-mount format provides more I/O and peripheral connections than smaller packages while remaining compatible with conventional reflow assembly. The MCU combines 64 KB of Flash with 8 KB of SRAM, giving embedded developers space for control code, parameter tables and working data in a single device.
Typical uses include brushless DC motor controllers, stepper-motor drives, servo amplifiers, HVAC compressor controls, industrial automation modules and energy-efficient appliance drives. The analog peripherals are particularly useful when a design requires current measurement and closed-loop current control close to the PWM generation circuitry.
Designers should allocate the pins required by the selected motor-control topology and preserve clear copper paths between the MCU, power stage and current-sense network. Decoupling, analog grounding and exposed-pin soldering must follow the Microchip package guidelines. Firmware, peripheral configuration and fault-handling behavior should be validated against the manufacturer data sheet and application notes before production release.
This product page combines the verified ordering details, key motor-control features, package information and practical design guidance. It also identifies the limits of direct replacement: a pin-compatible MCU must preserve the peripheral mapping, interrupt behavior, memory organization and software-tool assumptions of the original design.
드롭인 대체품: PIC24EP64MC206-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24EP64MC206-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Package.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청PIC24EP64MC206-I/PT 최대 정격 & 전기적 특성
| Product Type | 16-bit motor-control microcontroller |
| Maximum CPU Performance | 70 MIPS |
| Maximum Clock Speed | 60 MHz |
| Flash Memory | 64 KB (22K x 24) |
| SRAM | 8 KB |
| Program Memory Type | Flash |
| 동작 공급 전압 | 3.0 V to 3.6 V |
| 데이터 버스 폭 | 8 bit |
| I/O Port Count | 83 |
| General-Purpose Timer Count | 27 timers |
| Integrated Operational Amplifiers | 3 amplifiers |
| Integrated Comparators | 4 comparators |
| Motor-Control Peripherals | MCPWM and QEI |
| Peripheral Timing Block | PTG |
| 패키지 | 64-pin TQFP, 10 mm x 10 mm |
| Package Height | 1.10 mm |
| 실장 유형 | Surface mount |
| Automotive Qualification | AEC-Q100 qualified |
| Lifecycle Stage | Active |
| Temperature Grade | Industrial grade |
PIC24EP64MC206-I/PT 1.10 mm 핀 구성 가이드
PIC24EP64MC206-I/PT(1.10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC24EP64MC206-I/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC24EP64MC206-I/PT 적합 용도: 6 애플리케이션s: Brushless DC Motor Control, Stepper Motor Position Control, Servo Drive and Closed-Loop Control, Industrial HVAC Compressor Drive, Pump and Valve Control, Energy-Efficient Appliance Motor Drive.
Brushless DC Motor Control
The PIC24EP64MC206-I/PT fits brushless DC motor drives because its MCPWM, QEI and PTG resources support coordinated switching and rotor-position feedback within one 16-bit controller. The 70 MIPS family performance provides substantial control-loop bandwidth, while the integrated three amplifiers and four comparators can support current-sense conditioning and protection. Place the MCU close to the gate-driver interface, route PWM signals away from sensitive analog traces and validate dead time, fault shutdown and current limits against the manufacturer timing specifications.
추천
Stepper Motor Position Control
The PIC24EP64MC206-I/PT is suitable for compact stepper-motor position controllers because its high-speed PWM channels can generate excitation waveforms while QEI supports incremental encoder feedback. The 64 KB Flash provides room for motion tables, acceleration profiles and diagnostic logic, and the 8 KB SRAM supports real-time state. Keep encoder and current-sense paths away from switching-node returns, use a continuous ground reference for analog measurements and test open-circuit and overcurrent responses across startup conditions.
추천
Servo Drive and Closed-Loop Control
A servo amplifier can use the PIC24EP64MC206-I/PT for deterministic position, velocity and current-loop control because the MCU combines high-speed PWM, QEI and integrated analog comparison functions. At up to 60 MHz, the controller supports responsive digital filtering and fault management while retaining a simple 64-pin surface-mount footprint. Design the analog and power grounds as carefully as the digital logic, provide local regulator and MCU decoupling, and verify timing margins across the complete motor position range.
추천
Industrial HVAC Compressor Drive
The PIC24EP64MC206-I/PT can control compact HVAC compressor and fan drives where high-speed PWM, current sensing and position feedback are needed in one controller. Its 3.0 V to 3.6 V operating range suits regulated embedded power rails, and the integrated amplifiers and comparators reduce analog front-end complexity. Validate startup behavior, stalled-rotor detection and brownout recovery, while maintaining separation between motor-switching returns and low-level measurement paths.
추천
Pump and Valve Control
The PIC24EP64MC206-I/PT is appropriate for precision pumps, proportional valves and actuator controllers because its PWM resources can command power stages while comparator and amplifier inputs support feedback and threshold detection. The 64 KB Flash accommodates application-specific control tables, diagnostics and communication stacks. Keep feedback traces short and referenced to a clean analog ground, specify external protection against inductive transients, and validate closed-loop stability under minimum and maximum supply conditions.
추천
Energy-Efficient Appliance Motor Drive
The PIC24EP64MC206-I/PT can support efficient appliance motors by combining high-resolution PWM control, position feedback and integrated analog sensing in a compact 10 mm by 10 mm package. Its 70 MIPS family performance supports current shaping and load-aware control, reducing the need for separate analog and timing components. Choose decoupling and analog filtering that preserve control accuracy, account for motor-startup current in the power design, and test thermal behavior in the fully assembled enclosure.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24EP64MC206-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
설계 노트
Separate high-current motor-switching paths from the MCU's analog and reference routing. Keep the MCPWM outputs and QEI signals away from current-sense amplifiers, comparator inputs and external crystal or timing components. Use a continuous ground reference for measurement circuitry and follow the ground and decoupling arrangement in the Microchip family documentation when placing the 64-pin TQFP on the PCB.
The PIC24EP64MC206-I/PT operates from 3.0 V to 3.6 V, so the MCU rail should be generated with adequate transient response for the digital load and any analog references. Place the required local decoupling capacitors beside their associated supply pins, keep the power-stage return current out of the analog ground path, and verify brownout behavior across startup, stall and rapid deceleration conditions.
Do not treat a same-footprint PIC24E device as a drop-in replacement without checking the complete peripheral and pin tables. The PIC24EP64MC206-I/PT combines MCPWM, QEI, PTG, three amplifiers and four comparators, and alternate pin multiplexing can move these functions. A valid substitution must preserve power pins, analog channels, timer resources, memory capacity, temperature grade and software compatibility.
Treat motor-control feedback as an analog signal path even though it is sampled digitally. Use short, guarded routes for encoder and current-sense connections, provide a clean analog ground reference and place filtering close to the relevant amplifier or comparator pins. Check timing and noise margins with the power stage operating because switching transients can couple into sensitive measurement nodes even when the PCB has a solid ground plane.
규정 준수 정보
The component listing identifies the device as AEC-Q100 automotive qualified. RoHS, REACH, lead-free, halogen-free and conflict-minerals status were not established and remain unknown.