PIC24EP64MC206-I/PT - 70 MIPS 64KB Flash Motor Control MCU | Microchip
MPN: PIC24EP64MC206-I/PT ✓ AktifPIC24EP64MC206-I/PT Ringkasan
A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O and dedicated peripherals on one device. The PIC24E belongs to the 16-bit microcontroller family within the broader embedded-control and power-management ecosystem. Its motor-control feature set combines high-speed switching functions with analog signal conditioning, reducing the number of external components required in compact motor-control systems.
The PIC24EP64MC206-I/PT provides 83 I/O ports, Flash memory and an 8-bit data-bus interface. Its high-speed PWM hardware is suited to electronic commutation, field-oriented control and other timing-sensitive algorithms. Three integrated operational amplifiers and four comparators support current sensing, control-loop conditioning and protection. The integrated motor-control peripherals can improve responsiveness by placing measurement and switching functions close to the processor core.
The 64-pin TQFP package measures 10 mm by 10 mm and has a stated body height of 1.10 mm. This surface-mount format provides more I/O and peripheral connections than smaller packages while remaining compatible with conventional reflow assembly. The MCU combines 64 KB of Flash with 8 KB of SRAM, giving embedded developers space for control code, parameter tables and working data in a single device.
Typical uses include brushless DC motor controllers, stepper-motor drives, servo amplifiers, HVAC compressor controls, industrial automation modules and energy-efficient appliance drives. The analog peripherals are particularly useful when a design requires current measurement and closed-loop current control close to the PWM generation circuitry.
Designers should allocate the pins required by the selected motor-control topology and preserve clear copper paths between the MCU, power stage and current-sense network. Decoupling, analog grounding and exposed-pin soldering must follow the Microchip package guidelines. Firmware, peripheral configuration and fault-handling behavior should be validated against the manufacturer data sheet and application notes before production release.
This product page combines the verified ordering details, key motor-control features, package information and practical design guidance. It also identifies the limits of direct replacement: a pin-compatible MCU must preserve the peripheral mapping, interrupt behavior, memory organization and software-tool assumptions of the original design.
Alternatif penggantian untuk PIC24EP64MC206-I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24EP64MC206-I/PT (sama faktor bentuk dan footprint) — berbeda di dalam Package.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifPIC24EP64MC206-I/PT Rating Maksimal & Karakteristik Listrik
| Product Type | 16-bit motor-control microcontroller |
| Maximum CPU Performance | 70 MIPS |
| Maximum Clock Speed | 60 MHz |
| Flash Memory | 64 KB (22K x 24) |
| SRAM | 8 KB |
| Program Memory Type | Flash |
| Tegangan Pemuat Kerja | 3.0 V to 3.6 V |
| Lebar Bus Data | 8 bit |
| I/O Port Count | 83 |
| General-Purpose Timer Count | 27 timers |
| Integrated Operational Amplifiers | 3 amplifiers |
| Integrated Comparators | 4 comparators |
| Motor-Control Peripherals | MCPWM and QEI |
| Peripheral Timing Block | PTG |
| Paket | 64-pin TQFP, 10 mm x 10 mm |
| Package Height | 1.10 mm |
| Tipe Mounting | Surface mount |
| Automotive Qualification | AEC-Q100 qualified |
| Lifecycle Stage | Active |
| Temperature Grade | Industrial grade |
PIC24EP64MC206-I/PT 1.10 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk PIC24EP64MC206-I/PT (1.10 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk PIC24EP64MC206-I/PT.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
PIC24EP64MC206-I/PT cocok untuk 6 aplikasis: Brushless DC Motor Control, Stepper Motor Position Control, Servo Drive and Closed-Loop Control, Industrial HVAC Compressor Drive, Pump and Valve Control, Energy-Efficient Appliance Motor Drive.
Brushless DC Motor Control
The PIC24EP64MC206-I/PT fits brushless DC motor drives because its MCPWM, QEI and PTG resources support coordinated switching and rotor-position feedback within one 16-bit controller. The 70 MIPS family performance provides substantial control-loop bandwidth, while the integrated three amplifiers and four comparators can support current-sense conditioning and protection. Place the MCU close to the gate-driver interface, route PWM signals away from sensitive analog traces and validate dead time, fault shutdown and current limits against the manufacturer timing specifications.
Direkomendasikan
Stepper Motor Position Control
The PIC24EP64MC206-I/PT is suitable for compact stepper-motor position controllers because its high-speed PWM channels can generate excitation waveforms while QEI supports incremental encoder feedback. The 64 KB Flash provides room for motion tables, acceleration profiles and diagnostic logic, and the 8 KB SRAM supports real-time state. Keep encoder and current-sense paths away from switching-node returns, use a continuous ground reference for analog measurements and test open-circuit and overcurrent responses across startup conditions.
Direkomendasikan
Servo Drive and Closed-Loop Control
A servo amplifier can use the PIC24EP64MC206-I/PT for deterministic position, velocity and current-loop control because the MCU combines high-speed PWM, QEI and integrated analog comparison functions. At up to 60 MHz, the controller supports responsive digital filtering and fault management while retaining a simple 64-pin surface-mount footprint. Design the analog and power grounds as carefully as the digital logic, provide local regulator and MCU decoupling, and verify timing margins across the complete motor position range.
Direkomendasikan
Industrial HVAC Compressor Drive
The PIC24EP64MC206-I/PT can control compact HVAC compressor and fan drives where high-speed PWM, current sensing and position feedback are needed in one controller. Its 3.0 V to 3.6 V operating range suits regulated embedded power rails, and the integrated amplifiers and comparators reduce analog front-end complexity. Validate startup behavior, stalled-rotor detection and brownout recovery, while maintaining separation between motor-switching returns and low-level measurement paths.
Direkomendasikan
Pump and Valve Control
The PIC24EP64MC206-I/PT is appropriate for precision pumps, proportional valves and actuator controllers because its PWM resources can command power stages while comparator and amplifier inputs support feedback and threshold detection. The 64 KB Flash accommodates application-specific control tables, diagnostics and communication stacks. Keep feedback traces short and referenced to a clean analog ground, specify external protection against inductive transients, and validate closed-loop stability under minimum and maximum supply conditions.
Direkomendasikan
Energy-Efficient Appliance Motor Drive
The PIC24EP64MC206-I/PT can support efficient appliance motors by combining high-resolution PWM control, position feedback and integrated analog sensing in a compact 10 mm by 10 mm package. Its 70 MIPS family performance supports current shaping and load-aware control, reducing the need for separate analog and timing components. Choose decoupling and analog filtering that preserve control accuracy, account for motor-startup current in the power design, and test thermal behavior in the fully assembled enclosure.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24EP64MC206-I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Catatan Desain
Separate high-current motor-switching paths from the MCU's analog and reference routing. Keep the MCPWM outputs and QEI signals away from current-sense amplifiers, comparator inputs and external crystal or timing components. Use a continuous ground reference for measurement circuitry and follow the ground and decoupling arrangement in the Microchip family documentation when placing the 64-pin TQFP on the PCB.
The PIC24EP64MC206-I/PT operates from 3.0 V to 3.6 V, so the MCU rail should be generated with adequate transient response for the digital load and any analog references. Place the required local decoupling capacitors beside their associated supply pins, keep the power-stage return current out of the analog ground path, and verify brownout behavior across startup, stall and rapid deceleration conditions.
Do not treat a same-footprint PIC24E device as a drop-in replacement without checking the complete peripheral and pin tables. The PIC24EP64MC206-I/PT combines MCPWM, QEI, PTG, three amplifiers and four comparators, and alternate pin multiplexing can move these functions. A valid substitution must preserve power pins, analog channels, timer resources, memory capacity, temperature grade and software compatibility.
Treat motor-control feedback as an analog signal path even though it is sampled digitally. Use short, guarded routes for encoder and current-sense connections, provide a clean analog ground reference and place filtering close to the relevant amplifier or comparator pins. Check timing and noise margins with the power stage operating because switching transients can couple into sensitive measurement nodes even when the PCB has a solid ground plane.
Informasi Konformitas
The component listing identifies the device as AEC-Q100 automotive qualified. RoHS, REACH, lead-free, halogen-free and conflict-minerals status were not established and remain unknown.