PIC24F08KM204-I/PT - 16-bit XLP MCU, 8KB Flash, 44-TQFP | Microchip
부품 번호: PIC24F08KM204-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.92 | $3.92 |
| 10 | $3.55 | $35.50 |
| 100 | $3.18 | $318.00 |
| 500 | $2.86 | $1,430.00 |
| 1,000 | $2.54 | $2,540.00 |
PIC24F08KM204-I/PT 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. The PIC24F is a 16-bit RISC family, occupying the middle ground between 8-bit PIC MCUs and 32-bit ARM Cortex devices - it offers deterministic MIPS execution, low sleep currents typical of XLP designs, and a mature MPLAB X toolchain. Within the broader taxonomy, PIC24F08KM204 belongs to: microcontroller -> 16-bit MCU -> PIC24F family -> KM sub-family (low-pin-count, integrated analog) -> embedded processing.
Key features include multiple low-power sleep modes, peripheral pin select for flexible I/O mapping, a 32 kHz secondary oscillator for RTC, and a CTMU (Charge Time Measurement Unit) for touch and capacitive sensing. The integrated op amps and comparators allow direct sensor signal conditioning without external analog ICs. The 44-TQFP footprint exposes up to 35 digital I/O pins, several 5V-tolerant inputs, and dedicated analog channels, making the device well-suited for compact mixed-signal designs.
Typical applications include battery-powered sensor nodes, handheld instruments, IoT edge devices, and consumer products where low quiescent current, integrated analog, and modest code size are required. The wide VDD range and rich peripheral set reduce external component count.
When designing with this MCU, allocate attention to decoupling (100 nF plus bulk capacitor at VDD/AVDD), unused-pin termination (configure as outputs or inputs with pull-ups), and ICD3/REAL ICE programming header layout for in-circuit debugging. Use the MSSP and UART modules for digital communication, and reserve the CLC for glue logic to reduce external gates.
This page synthesizes drop-in alternatives within the same TQFP-44 footprint, distributor pricing, and practical design notes not found in the manufacturer datasheet alone - enabling faster sourcing and design-in decisions for engineering teams.
드롭인 대체품: PIC24F08KM204-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24F08KM204-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, ADC, DAC, Program Memory (Flash), Maximum CPU Speed.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC24F16KM204-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.05 / 개
데이터시트 보기 →PIC24FV08KM204-I/PT
✅ 드롭인✓ 재고 있음
$1.94 / 개
데이터시트 보기 →PIC24F08KM204-I/ML
✅ 드롭인✓ 재고 있음
$2.31 / 개
데이터시트 보기 →PIC24F08KM204-I/PT 최대 정격 & 전기적 특성
| Core Architecture | PIC24F 16-bit RISC CPU |
| Program Memory (Flash) | 8 KB (2.75K x 24 words) |
| Data SRAM | 2 KB |
| Maximum CPU Speed | 32 MIPS (at 32 MHz Fosc) |
| Operating Voltage (VDD) | 2.5 V or 3.3 V nominal (range per datasheet) |
| 동작 온도 | -40 C to +85 C (Industrial -I suffix) |
| 패키지 | 44-pin TQFP (10x10 mm) |
| ADC | 12-bit, multi-channel |
| DAC | 8-bit |
| Integrated Op Amps | Yes (on-chip) |
| Comparators | Yes |
| Configurable Logic Cell (CLC) | Yes |
| PWM / CCP Modules | Multiple Capture/Compare/PWM |
| CTMU | Yes (touch / capacitive sensing) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
PIC24F08KM204-I/PT 핀 구성
| 핀 1 | RP5/RB5 — Remappable I/O / Port B bit 5 |
| 핀 2 | RP6/RB6 — Remappable I/O / Port B bit 6 |
| 핀 3 | RP7/RB7 — Remappable I/O / Port B bit 7 |
| 핀 4 | RP8/RB8 — Remappable I/O / Port B bit 8 |
| 핀 5 | VSS — Ground reference |
| 핀 6 | OSC1/RA1 — Oscillator input / Port A bit 1 |
| 핀 7 | OSC2/RA0 — Oscillator output / Port A bit 0 |
| 핀 8 | VCAP — External filter capacitor for internal LDO |
| 핀 9 | PGEC1 — In-circuit debug / programming clock |
| 핀 10 | PGED1 — In-circuit debug / programming data |
| 핀 11 | RP9/RB9 — Remappable I/O / Port B bit 9 |
| 핀 12 | RP10/RB10 — Remappable I/O / Port B bit 10 |
| 핀 13 | RP11/RB11 — Remappable I/O / Port B bit 11 |
| 핀 14 | VSS — Ground reference |
| 핀 15 | VDD — Positive supply voltage |
| 핀 16 | RP12/RB12 — Remappable I/O / Port B bit 12 |
| 핀 17 | RP13/RB13 — Remappable I/O / Port B bit 13 |
| 핀 18 | RP14/RB14 — Remappable I/O / Port B bit 14 |
| 핀 19 | RP15/RB15 — Remappable I/O / Port B bit 15 |
| 핀 20 | VSS — Ground reference |
| 핀 21 | VDD — Positive supply voltage |
| 핀 22 | SOSCI/RP4/RB4 — Secondary oscillator / remappable I/O |
| 핀 23 | SOSCO/RA4 — Secondary oscillator output / Port A bit 4 |
| 핀 24 | RA3 — Port A bit 3 |
| 핀 25 | RA2 — Port A bit 2 |
| 핀 26 | MCLR — Master Clear reset input |
| 핀 27 | AN0/CVREF/RA0 — Analog input 0 / CVREF output / Port A bit 0 |
| 핀 28 | AN1/RP0/RB0 — Analog input 1 / remappable I/O / Port B bit 0 |
| 핀 29 | AN2/RP1/RB1 — Analog input 2 / remappable I/O / Port B bit 1 |
| 핀 30 | AN3/RP2/RB2 — Analog input 3 / remappable I/O / Port B bit 2 |
| 핀 31 | AN4/RP3/RB3 — Analog input 4 / remappable I/O / Port B bit 3 |
| 핀 32 | AVSS — Analog ground reference |
| 핀 33 | AVDD — Analog positive supply voltage |
| 핀 34 | VREF+/AN5/RA5 — Voltage reference positive / Analog input 5 / Port A bit 5 |
| 핀 35 | VREF-/AN6/RA6 — Voltage reference negative / Analog input 6 / Port A bit 6 |
| 핀 36 | AN7/RA7 — Analog input 7 / Port A bit 7 |
| 핀 37 | RC1 — Port C bit 1 |
| 핀 38 | RC2 — Port C bit 2 |
| 핀 39 | RC3 — Port C bit 3 |
| 핀 40 | RC4 — Port C bit 4 |
| 핀 41 | RD0 — Port D bit 0 |
| 핀 42 | RD1 — Port D bit 1 |
| 핀 43 | RD2 — Port D bit 2 |
| 핀 44 | RD3 — Port D bit 3 |
일반적인 애플리케이션
PIC24F08KM204-I/PT 적합 용도: 7 애플리케이션s: Battery-Powered IoT Sensor Nodes, Handheld Medical Monitoring Devices, Consumer Appliance Control Panels, Portable Test and Measurement Instruments, Industrial Sensor Transmitters, Automotive Interior Accessories (Non-Safety), Touch-Sensitive User Interfaces.
Battery-Powered IoT Sensor Nodes
The PIC24F08KM204-I/PT's nanoWatt XLP technology delivers sleep currents below 1 uA, making it ideal for coin-cell or 2xAA powered wireless sensor nodes. The integrated 12-bit ADC, op amps, and CTMU module enable direct sensor interfacing without external analog ICs. Its 8KB Flash supports BLE/Zigbee stack fragments when paired with an external radio transceiver. Placed as the central MCU on the sensor PCB, it reduces BOM by eliminating dedicated temperature/analog front-end ICs.
추천
Handheld Medical Monitoring Devices
The PIC24F08KM204-I/PT's integrated 12-bit ADC and on-chip op amps suit handheld medical devices such as pulse oximeters and thermometers, where signal conditioning must coexist with low power consumption. The 32 MIPS performance provides real-time filtering of biosignals without external DSP. Operating from 3.3V, the part integrates cleanly with Li-ion battery management. Its industrial -40 C to +85 C temperature range supports clinical and home-healthcare environments.
추천
Consumer Appliance Control Panels
In consumer appliances such as washing machines, coffee makers, and air purifiers, the PIC24F08KM204-I/PT drives keypads, LED indicators, and motor control PWM channels while maintaining low standby power for Energy Star compliance. The integrated CLC module replaces discrete logic glue for sensor interlocks and timing functions. Its 44-TQFP footprint is well-suited to compact control boards where both digital I/O and analog sensing are required on a single die.
추천
Portable Test and Measurement Instruments
The PIC24F08KM204-I/PT's 32 MIPS CPU, 12-bit ADC, and integrated op amps deliver adequate signal processing for portable multimeters and basic oscilloscope probes. The on-chip op amp can buffer high-impedance probe signals before ADC sampling, while the comparator enables threshold detection with sub-microsecond response. Its XLP sleep modes extend battery runtime during standby, and the 44-TQFP package supports standard hand-held instrument form factors.
추천
Industrial Sensor Transmitters
In 4-20 mA loop-powered industrial sensor transmitters, the PIC24F08KM204-I/PT's low operating current and 12-bit ADC resolution enable accurate measurement of pressure, temperature, or flow signals. The integrated op amps and comparators handle sensor bridge excitation and threshold detection. Operating from 3.3V with the industrial -40 C to +85 C temperature range, it is qualified for factory automation and process control environments. The CLC module implements HART or similar protocol encoding in hardware.
추천
Automotive Interior Accessories (Non-Safety)
While not AEC-Q100 qualified, the PIC24F08KM204-I/PT is widely used in non-safety automotive interior accessories such as seat heaters, ambient lighting controllers, and USB charging hubs where the operating environment remains within industrial -40 C to +85 C. The integrated PWM modules drive LED dimming and motor speed control, while the 12-bit ADC reads temperature and current sensors. Designers should ensure supply transients are clamped externally since the MCU lacks automotive-grade qualification.
추천
Touch-Sensitive User Interfaces
The PIC24F08KM204-I/PT integrates the CTMU (Charge Time Measurement Unit), enabling capacitive touch sensing for buttons, sliders, and proximity detection without external touch controller ICs. Combined with its CLC and PWM peripherals, designers can build complete touch user interfaces for appliances, IoT devices, and consumer electronics. The on-chip op amp supports guard-ring shielding to improve touch sensitivity in noisy environments. With 8KB Flash and 2KB SRAM, firmware fits comfortably within the part's resources.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24F08KM204-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24F16KM204-I/PT | PIC24FV08KM204-I/PT | PIC24F08KM204-I/ML |
|---|---|---|---|---|
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-QFN (8x8 mm) - different |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 8 KB | 16 KB | 8 KB | 8 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 2 KB |
| Maximum CPU Speed | 32 MIPS / 32 MHz | 32 MIPS / 32 MHz | 32 MIPS / 32 MHz | 32 MIPS / 32 MHz |
| Operating Voltage | 2.5V / 3.3V | 2.5V / 3.3V | 2.0V-5.5V (5V tolerant) | 2.5V / 3.3V |
| 12-bit ADC | Yes | Yes | Yes | Yes |
| Integrated Op Amps | Yes | Yes | Yes | Yes |
| XLP Sleep Current | nanoWatt (<1 uA typical) | nanoWatt (<1 uA typical) | nanoWatt (<1 uA typical) | nanoWatt (<1 uA typical) |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
주요 차별점
- True nanoWatt XLP sleep current below 1 uA (vs PIC24FJ64GA002-I/ML)
- Integrated op amps and CTMU on-chip (vs PIC24EP32GP204-I/PT)
- Configurable Logic Cell (CLC) replaces discrete glue logic (vs PIC24F08KA102-I/ML)
설계 노트
Place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pin pair, with a 4.7 uF or 10 uF bulk capacitor at the MCU supply input. The PIC24F08KM204-I/PT draws sub-microamp sleep currents when properly decoupled; poor decoupling will inflate this current. The VCAP pin (pin 8) requires a low-ESR 10 uF capacitor for internal voltage regulator stability - never leave it floating. Estimated: with 3.3V VDD at 32 MHz active, the core draws approximately 8 mA; in Sleep mode the part drops below 1 uA.
Route the PGEC1/PGED1 (pins 9, 10) traces as a matched-length pair to the in-circuit debugger header, with a series resistor or ferrite if long traces are required. Avoid routing analog signals (AN0-AN7, VREF+, VREF-) near digital switching lines to minimize ADC crosstalk. Keep the analog ground (AVSS, pin 32) and digital ground (VSS, pins 5, 14, 20) tied to a single star ground point beneath the MCU. The 44-TQFP package exposes the thermal pad to the die; copper pours under the package improve thermal dissipation.
Do not leave unused I/O pins floating - configure them as digital outputs driven low or as inputs with internal pull-ups enabled, to prevent parasitic current paths. The MCLR pin (pin 26) requires a 10 kohm pull-up to VDD; do not tie it directly to VDD. When using the CTMU for capacitive touch, ensure the sensor electrodes have a clean guard ring and stable ground reference. Always program the Configuration bits explicitly; relying on defaults can leave JTAG enabled and consume flash space reserved for application code.
For ADC sampling above 200 ksps, the PIC24F08KM204-I/PT requires the AVDD pin to be well-bypassed with both a 100 nF ceramic and a 10 uF bulk capacitor. The VREF+ pin must source sufficient current for the ADC reference ladder; use an external low-impedance reference (such as MCP1501) when sampling multiple channels rapidly to avoid reference droop. Avoid toggling digital outputs near analog inputs during ADC conversions; this is the dominant source of crosstalk in mixed-signal PIC24F designs.
규정 준수 정보
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - use PIC18F or dsPIC33 automotive parts for safety-relevant automotive designs. Halogen-free status not explicitly stated in available data.