PIC24F16KL402T-I/ML - 32MHz 16-bit XLP MCU | Microchip
부품 번호: PIC24F16KL402T-I/ML ✓ 활성PIC24F16KL402T-I/ML 개요
A 16-bit microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated circuit. The PIC24F16KL402 belongs to the PIC24F family and positions itself between an 8-bit controller and a more complex general-purpose MCU. Its architecture is intended for cost-sensitive systems requiring stronger computational performance and communication peripherals without the cost and complexity of a larger microcontroller.
The principal resources are 16 KB of Flash, 1 KB of SRAM, and 512 bytes of EEPROM, while the 10-bit ADC supports analog measurements required in control and sensing systems. Operation up to 32 MHz provides up to 16 MIPS performance. Integrated MSSP resources support I2C and SPI communication, and CCP/ECCP peripherals add capture, compare, and PWM capabilities for timing-sensitive applications.
The -I grade identifies the industrial temperature option, supporting operation from -40°C to +125°C. The T-I/ML ordering code selects the industrial-grade device in the 28-QFN 6x6 mm package. Lead-free construction is identified for this ordering code, making it appropriate for current RoHS-oriented manufacturing processes when the applicable product declarations and assembly requirements are confirmed for the production lot.
Typical uses include industrial sensor nodes, compact control panels, battery-operated instruments, serial data acquisition modules, and low-cost communications equipment. The MSSP peripherals are particularly useful when a design must connect an ADC, display, external memory, or sensor over I2C or SPI. The CCP/ECCP blocks are valuable for motor-control timing, signal capture, and PWM generation without relying on software timing loops.
When laying out the circuit, place input, output, and decoupling connections directly beneath the associated QFN terminals and follow the manufacturer land-pattern requirements. Keep sensitive analog inputs away from high-current switching paths, provide a stable supply reference, and validate the complete pin assignment against the datasheet before routing a replacement board.
This product overview combines the key electrical limits, package details, application guidance, cross-reference constraints, and practical design considerations engineers need when evaluating the PIC24F16KL402T-I/ML for a new low-power embedded platform.
드롭인 대체품: PIC24F16KL402T-I/ML — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24F16KL402T-I/ML (동일 폼 팩터 및 풋프린트) — 차이점: Package, Data EEPROM, ADC, CCP/ECCP Modules, Core Architecture.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청PIC24F16KL402T-I/ML 최대 정격 & 전기적 특성
| Architecture | 16-bit PIC24F |
| 최대 클록 주파수 | 32 MHz |
| Maximum Performance | 16 MIPS |
| Program Memory | 16 KB Flash |
| Program Memory Organization | 5.5K x 24 words |
| SRAM | 1 KB |
| Data EEPROM | 512 bytes |
| ADC Resolution | 10 bits |
| 동작 공급 전압 | 1.8 V to 3.6 V |
| I/O Port Count | 17 ports |
| Serial Peripherals | MSSP supporting I2C and SPI |
| Timer Peripherals | CCP and ECCP |
| Low-Power Technology | nanoWatt XLP |
| 동작 온도 | -40°C to +125°C |
| 패키지 | 28-QFN, 6 x 6 mm |
| 실장 유형 | Surface mount |
| Lead-Free Construction | Lead-free |
| 수명 주기 상태 | Active |
PIC24F16KL402T-I/ML 28-qfn, 6 x 6 mm 핀 구성 가이드
PIC24F16KL402T-I/ML(28-qfn, 6 x 6 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC24F16KL402T-I/ML.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC24F16KL402T-I/ML 적합 용도: 6 애플리케이션s: Industrial Sensor Node, Battery-Powered Data Logger, Serial Communication Controller, Compact Motor and PWM Controller, Medical Instrument Control Module, Cost-Sensitive Embedded Control.
Industrial Sensor Node
The PIC24F16KL402T-I/ML fits an industrial sensor node that combines analog measurement with low-power serial communications. Its 10-bit ADC can acquire sensor signals, while MSSP peripherals provide I2C or SPI connectivity to sensors, signal conditioners, or local storage. The 32 MHz processor provides 16 MIPS performance for filtering, control, diagnostics, and communication framing, while the -40°C to +125°C grade supports industrial equipment. The 1 KB SRAM and 512-byte EEPROM provide useful working and configuration memory for compact designs. A practical implementation places the ADC input near its signal source, connects the serial bus through defined pull-ups where required, and uses a low-leakage 3.3 V regulator to preserve power headroom.
추천
Battery-Powered Data Logger
The PIC24F16KL402T-I/ML is suitable for a battery-powered data logger because nanoWatt XLP technology supports low-power operating strategies and the device runs from a 1.8 V to 3.6 V supply. Its 10-bit ADC can sample basic environmental or analog inputs, while 1 KB of SRAM provides a working buffer and 512 bytes of EEPROM can retain configuration or counters. At 32 MHz, the controller can perform measurement sequencing, scaling, and compact data preparation between sleep intervals. The design should measure current across active, idle, and sleep states rather than assume a single consumption figure. A low-leakage regulator, minimized sensor duty cycle, and local bulk capacitance help preserve energy, while the 28-QFN footprint keeps the controller compact.
추천
Serial Communication Controller
The PIC24F16KL402T-I/ML works well as a compact serial communication controller for configuration, monitoring, or embedded protocol bridging. Its MSSP peripheral supports I2C and SPI, reducing the need for discrete interface circuitry when connecting sensors, memory, converters, or external controllers. A 32 MHz execution rate gives enough throughput for protocol handling, checksums, framing, and supervisory tasks, while the 10-bit ADC adds local monitoring capability. Designers should use the manufacturer pin and peripheral mapping when assigning alternate-function signals and should account for bus rise-time requirements with suitable pull-ups or line drivers. Keeping serial traces short and separating switching currents from the MCU supply and analog reference improves reliability in compact embedded assemblies.
추천
Compact Motor and PWM Controller
PIC24F16KL402T-I/ML can control small motor, valve, or actuator systems using its CCP and ECCP peripherals for precise timing and PWM generation. The 16-bit architecture and 32 MHz clock support responsive duty-cycle updates and coordinated control tasks, while the 10-bit ADC can monitor a current, position, temperature, or supply signal. The 28-QFN 6x6 mm package allows a compact controller footprint, and the industrial -40°C to +125°C range fits demanding equipment. Power transistors and protection components should be selected separately according to load voltage and current. Firmware must include suitable dead time or shoot-through protection, while PCB layout should keep high-current switching loops away from analog inputs and sensitive control traces.
추천
Medical Instrument Control Module
The PIC24F16KL402T-I/ML can serve as the control core of a compact medical or laboratory instrument that handles sensor acquisition, operator I/O, and serial communication. The 10-bit ADC supports basic analog monitoring, while I2C and SPI interfaces can connect measurement peripherals, displays, and external data storage. Its -40°C to +125°C industrial rating provides useful temperature-range flexibility for equipment deployed outside a controlled bench environment. The 1 KB SRAM is adequate for modest buffering, but the designer should confirm that logging, display, and safety tasks do not exceed the available memory. Protective current limits, watchdogs, calibration records, and fault handling belong in the system design, and the analog front end should be isolated electrically from switching and actuator circuitry.
추천
Cost-Sensitive Embedded Control
The PIC24F16KL402T-I/ML is appropriate for cost-sensitive embedded controllers that need more capability than an 8-bit design without adopting a larger processor. It combines 16-bit execution, 32 MHz performance, 16 KB of Flash, 1 KB of SRAM, EEPROM, ADC, MSSP, and timer peripherals in one 28-QFN device. This integration can reduce external component count in appliances, simple test equipment, access-control terminals, and compact automation modules. The 1.8 V to 3.6 V operating range also supports common low-voltage rails, while the industrial grade covers wide ambient conditions. Development should include a brownout-aware startup strategy, careful ADC-reference design, firmware checks for unused peripheral pins, and production programming procedures that preserve the configured flash and EEPROM content.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24F16KL402T-I/ML — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 28-QFN, 6 x 6 mm |
| Brand | Microchip Technology |
| Architecture | 16-bit PIC24F |
| Maximum Clock Frequency | 32 MHz |
| Maximum Performance | 16 MIPS |
| Program Memory | 16 KB Flash |
| SRAM | 1 KB |
| Data EEPROM | 512 bytes |
| ADC Resolution | 10 bits |
| Operating Voltage | 1.8 V to 3.6 V |
| I/O Port Count | 17 ports |
| Operating Temperature | -40°C to +125°C |
주요 차별점
- Integrated low-power communication peripherals (vs PIC24FJ16GA002T-I/ML)
- Industrial temperature coverage (vs PIC24F16KL402-E/ML)
- Compact integrated resource set (vs PIC24FJ16GA002T-I/ML)
설계 노트
Use the 28-QFN 6x6 mm land pattern and exposed-pad connection specified by Microchip rather than treating the device as a generic 28-pin QFN. Place input and output decoupling capacitors close to their corresponding terminals, provide a continuous ground reference beneath the device where the package drawing permits, and route programming and debug access before finalizing the board outline.
Design the supply for the 1.8 V to 3.6 V operating range and evaluate current under the highest expected clock, peripheral, and I/O loading. Because the MCU supports nanoWatt XLP operation, measure active and sleep current at the system level; a low-power mode specification alone does not include regulator, sensor, or communication-load consumption.
Keep the 10-bit ADC input and reference paths away from I2C, SPI, switching, and high-current actuator routes. Use a quiet reference source, minimize copper around sensitive analog nets, and establish return paths that do not share high-current switching loops. Validate acquisition accuracy in the final enclosure because digital activity and nearby power converters can affect analog measurements.
Do not substitute a differently suffixed family member without checking the package drawing and pin table. The -I temperature grade, QFN dimensions, exposed pad, packing designation, and available peripheral pins all affect qualification. A functional-equivalent listing is not automatically a footprint-compatible replacement, particularly when the package suffix changes.
규정 준수 정보
The ordering-code listing identifies the device as lead-free plastic. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations were not stated for this exact MPN.