PIC24FJ128DA206T-I/PT - 128KB Flash 16-Bit MCU w/ USB OTG | Microchip
부품 번호: PIC24FJ128DA206T-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.85 | $7.85 |
| 10 | $7.1 | $71.00 |
| 100 | $6.35 | $635.00 |
| 500 | $5.78 | $2,890.00 |
| 1,000 | $5.22 | $5,220.00 |
PIC24FJ128DA206T-I/PT 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals. Within the embedded hierarchy, the PIC24FJ belongs to the 16-bit MCU class, which sits between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (PIC32). The "PIC24F" prefix designates the family, while "J" indicates the high-performance, low-power Flash variant using Microchip's nanoWatt technology. The "DA" series specifically integrates display and USB-OTG peripherals, targeting human-machine interface (HMI) and USB-embedded designs.
Key features include an integrated Full-Speed USB 2.0 OTG controller with on-chip transceiver, a graphics controller supporting TFT/STN/CSTN panels up to 640x480 (VGA), a 16-channel 10-bit ADC with 500 ksps conversion rate, up to 52 dedicated digital I/O pins, and hardware crypto engines for secure data transfer. The device also supports PMP (Parallel Master Port), I2S, SPI, I2C, UART, and CAN peripherals, providing extensive connectivity.
Architecturally, the PIC24FJ uses a modified Harvard architecture with separate buses for instruction and data, a 16-bit wide datapath, and a 24-bit instruction word. This delivers deterministic execution with single-cycle 16x16 MAC operations. The nanoWatt XLP technology reduces sleep current to the nanoampere range, making the device suitable for battery-powered applications.
Typical applications include USB barcode scanners, USB medical instrumentation, USB sensor hubs, USB-to-UART bridges, low-cost HMI panels with TFT displays, industrial control panels, and embedded graphics terminals. The integrated USB OTG reduces BOM cost and PCB area compared to designs using an external USB controller.
When designing with this device, ensure proper decoupling (100 nF ceramic plus 10 uF bulk) close to each VDD/VSS pair, follow Microchip's USB hardware design guidelines for the 90-ohm differential D+/D- trace impedance, and use the free MPLAB X IDE with the XC16 compiler for firmware development.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical USB/graphics design notes not consolidated in the manufacturer datasheet.
드롭인 대체품: PIC24FJ128DA206T-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24FJ128DA206T-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Graphics Controller, Package, Core Architecture, ADC, Timers.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC24FJ128DA206-I/PT
✅ 드롭인✓ 재고 있음
$4.1 / 개
데이터시트 보기 →PIC24FJ128DA110T-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.79 / 개
데이터시트 보기 →PIC24FJ128DA106T-I/MR
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.85 / 개
데이터시트 보기 →PIC24FJ128DA106-I/PT
✅ 드롭인✓ 재고 있음
$5.07 / 개
데이터시트 보기 →PIC24FJ128DA206-I/MR
✅ 드롭인✓ 재고 있음
$4.71 / 개
데이터시트 보기 →PIC24FJ128DA206T-I/PT 최대 정격 & 전기적 특성
| Core | PIC24F (16-bit RISC) |
| Family | PIC24FJ DA-series |
| Program Memory (Flash) | 128 KB (43K x 24) |
| RAM | 96 KB |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| 공급 전압 | 2.5 V to 3.6 V |
| 동작 온도 | -40 C to +85 C (Industrial) |
| 패키지 | 64-pin TQFP (10x10 mm) |
| 실장 유형 | Surface Mount |
| USB | USB 2.0 Full-Speed OTG with on-chip transceiver |
| Graphics Controller | Integrated (TFT/STN/CSTN, up to VGA) |
| ADC | 10-bit, 16-channel, up to 500 ksps |
| I/O Pins | Up to 52 |
| Timers | Five 16-bit |
| Communication | UART, SPI, I2C, I2S, PMP, CAN |
| Low-Power Technology | nanoWatt XLP |
| RoHS 상태 | Compliant |
PIC24FJ128DA206T-I/PT 핀 구성
| 핀 1 | RG15 — EPMP address/control line or general-purpose I/O |
| 핀 2 | VDD — Positive supply (2.5V-3.6V) |
| 핀 3 | RC15 — General-purpose I/O / oscillator |
| 핀 4 | RC13 — General-purpose I/O |
| 핀 5 | RC14 — General-purpose I/O / oscillator |
| 핀 6 | RA15 — General-purpose I/O |
| 핀 7 | RA14 — General-purpose I/O |
| 핀 8 | VDD — Positive supply |
| 핀 9 | RA13 — General-purpose I/O |
| 핀 10 | RA12 — General-purpose I/O |
| 핀 11 | RA11 — General-purpose I/O |
| 핀 12 | VSS — Ground |
| 핀 13 | RA10 — General-purpose I/O |
| 핀 14 | RA9 — General-purpose I/O |
| 핀 15 | RA8 — General-purpose I/O |
| 핀 16 | RA7 — General-purpose I/O |
| 핀 17 | RA6 — General-purpose I/O |
| 핀 18 | RC12 — General-purpose I/O |
| 핀 19 | RC11 — General-purpose I/O |
| 핀 20 | RC10 — General-purpose I/O |
| 핀 21 | RC9 — General-purpose I/O |
| 핀 22 | RC8 — General-purpose I/O |
| 핀 23 | RC7 — General-purpose I/O |
| 핀 24 | RC6 — General-purpose I/O |
| 핀 25 | RC5 — General-purpose I/O |
| 핀 26 | RC4 — General-purpose I/O |
| 핀 27 | VSS — Ground |
| 핀 28 | VDD — Positive supply |
| 핀 29 | RD15 — EPMP data bus / general-purpose I/O |
| 핀 30 | RD14 — EPMP data bus / general-purpose I/O |
| 핀 31 | RD13 — EPMP data bus / general-purpose I/O |
| 핀 32 | RD12 — EPMP data bus / general-purpose I/O |
| 핀 33 | D+ — USB D+ data line |
| 핀 34 | D- — USB D- data line |
| 핀 35 | VUSB33 — USB 3.3V regulator input |
| 핀 36 | RB15 — General-purpose I/O |
| 핀 37 | RB14 — General-purpose I/O / AN14 |
| 핀 38 | VSS — Ground |
| 핀 39 | RB13 — General-purpose I/O / AN13 |
| 핀 40 | RB12 — General-purpose I/O / AN12 |
| 핀 41 | RB11 — General-purpose I/O / AN11 |
| 핀 42 | RB10 — General-purpose I/O / AN10 |
| 핀 43 | RB9 — General-purpose I/O / AN9 |
| 핀 44 | RB8 — General-purpose I/O / AN8 |
| 핀 45 | RB7 — General-purpose I/O / AN7 |
| 핀 46 | RB6 — General-purpose I/O / AN6 |
| 핀 47 | RB5 — General-purpose I/O / AN5 |
| 핀 48 | RB4 — General-purpose I/O / AN4 |
| 핀 49 | RB3 — General-purpose I/O / AN3 |
| 핀 50 | RB2 — General-purpose I/O / AN2 |
| 핀 51 | RB1 — General-purpose I/O / AN1 |
| 핀 52 | RB0 — General-purpose I/O / AN0 |
| 핀 53 | RF7 — General-purpose I/O |
| 핀 54 | RF6 — General-purpose I/O |
| 핀 55 | RF5 — General-purpose I/O |
| 핀 56 | RF4 — General-purpose I/O |
| 핀 57 | RF3 — General-purpose I/O |
| 핀 58 | RF2 — General-purpose I/O |
| 핀 59 | RG2 — EPMP control / general-purpose I/O |
| 핀 60 | RG3 — EPMP control / general-purpose I/O |
| 핀 61 | RG6 — EPMP control / general-purpose I/O |
| 핀 62 | RG7 — EPMP control / general-purpose I/O |
| 핀 63 | RG8 — EPMP control / general-purpose I/O |
| 핀 64 | RG9 — EPMP control / general-purpose I/O / VDD core |
일반적인 애플리케이션
PIC24FJ128DA206T-I/PT 적합 용도: 6 애플리케이션s: USB Barcode Scanner, USB Medical Instrumentation, Low-Cost HMI Panel with TFT Display, USB-to-UART Bridge, Industrial Control Panel with Display, USB Sensor Hub.
USB Barcode Scanner
The PIC24FJ128DA206T-I/PT is well-suited for USB barcode scanner designs because of its integrated USB 2.0 Full-Speed OTG controller with on-chip transceiver, eliminating the need for an external USB chip and shrinking BOM cost by roughly $1. The 96 KB RAM buffers raw scan data, while the 32 MHz MIPS core performs image decoding in real time without choking on data bursts. Connect a 1D/2D imager module (e.g., Honeywell N5600) to the PMP/EPMP interface for high-speed sensor data acquisition.
추천
USB Medical Instrumentation
Medical instruments requiring USB connectivity (e.g., handheld spirometers, glucose meters, USB patient monitors) benefit from the PIC24FJ128DA206T-I/PT's nanoWatt XLP low-power sleep modes and integrated USB OTG. Sleep current in the nanoamp range extends battery life, while the integrated USB eliminates external PHY chips. The 10-bit 500 ksps ADC samples analog signals from sensors with adequate resolution for medical-grade accuracy when paired with proper analog signal conditioning.
추천
Low-Cost HMI Panel with TFT Display
The integrated graphics LCD controller of the PIC24FJ128DA206T-I/PT drives TFT/STN/CSTN panels up to VGA (640x480) without an external graphics controller, reducing system cost by $3-$5 per unit. The 96 KB RAM buffers full frames for smooth UI animations, and the EPMP interface outputs RGB data, hsync, VSYNC, and pixel clock directly to the display. Suitable for industrial control panels, appliance HMIs, and low-cost IoT touch displays.
추천
USB-to-UART Bridge
With integrated USB OTG and multiple UART peripherals, the PIC24FJ128DA206T-I/PT builds compact USB-to-UART/I2C/SPI bridges for industrial and embedded use cases. The 128 KB Flash accommodates CDC-ACM firmware plus vendor-specific protocols. Operating from 2.5 V to 3.6 V supports both 3.3 V and lower-voltage target MCUs, and the 52 GPIO pins provide ample signaling for status LEDs and configuration switches.
추천
Industrial Control Panel with Display
Industrial HMIs combine display + USB connectivity + sensor I/O - exactly the PIC24FJ128DA206T-I/PT's sweet spot. The graphics controller drives TFT displays, USB OTG supports configuration uploads from a laptop, and CAN/UART peripherals interface to industrial PLCs and motor drives. The -40 C to +85 C industrial temperature grade is suitable for factory floor deployments. Wide supply tolerance (2.5 V-3.6 V) handles noisy 24V-bus-derived rails.
추천
USB Sensor Hub
IoT sensor hubs aggregating temperature, humidity, pressure, and motion sensors over USB benefit from the PIC24FJ128DA206T-I/PT's USB OTG plus multiple I2C/SPI peripherals. The 10-bit 16-channel ADC adds analog sensor support, and 96 KB RAM buffers high-rate data streams. Firmware updates via USB OTG simplify field maintenance for deployed sensors. nanoWatt XLP sleep modes enable solar or battery-powered remote deployments.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24FJ128DA206T-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24FJ128DA206-I/PT | PIC24FJ128DA206-I/MR | PIC24FJ128DA106-I/PT | PIC24FJ128DA110T-I/PT | PIC24FJ128DA106T-I/MR |
|---|---|---|---|---|---|---|
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) - same | QFN-64 - different | TQFP-64 (10x10 mm) - same | TQFP-100 - different | QFN-64 - different |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | PIC24F 16-bit | PIC24F 16-bit | PIC24F 16-bit | PIC24F 16-bit | PIC24F 16-bit | PIC24F 16-bit |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| RAM | 96 KB | 96 KB | 96 KB | 96 KB | 96 KB | 96 KB |
| Maximum CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| USB OTG | Yes (integrated transceiver) | Yes (integrated transceiver) | Yes (integrated transceiver) | Yes (integrated transceiver) | Yes (integrated transceiver) | Yes (integrated transceiver) |
| Graphics Controller | Integrated (up to VGA) | Integrated (up to VGA) | Integrated (up to VGA) | Integrated (up to QVGA) | Integrated (up to VGA) | Integrated (up to QVGA) |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
주요 차별점
- Integrated USB OTG with on-chip transceiver (vs PIC24FJ64GP205-I/PT)
- Integrated graphics controller supporting VGA resolution (vs PIC24FJ128GA006-I/PT)
- 96 KB RAM for full-frame graphics buffering (vs PIC24FJ64GP205-I/PT)
설계 노트
Estimated: at 32 MHz active CPU speed, the PIC24FJ128DA206T-I/PT draws approximately 30 mA from a 3.3V supply, plus up to 8 mA when the USB OTG transceiver is active. Use a 100 nF ceramic decoupling capacitor close to each VDD/VSS pair (pins 2/12, 8/27, 28/38, 64/AG pair) plus a single 10 uF bulk capacitor at the chip's main supply pin. The VUSB33 pin (pin 35) requires a separate 100 nF bypass capacitor and an internal voltage regulator can supply the USB transceiver from VDD; consult section 2 of the datasheet for exact topology.
For USB OTG operation, the D+ (pin 33) and D- (pin 34) traces must be routed as a 90-ohm differential pair with matched length and continuous reference plane on the inner layer. Place the 15 kB pull-down resistor on D+ (for full-speed detection) within 4 mm of the pin. The TQFP-64 package exposes the EPMP data bus on pins 29-32 (RD12-RD15), which should be routed together to the display connector with controlled impedance. Add a 4-layer PCB with dedicated ground plane for USB signals.
Do not operate USB OTG below 3.0V on VUSB33 - USB signaling will fail. The ICSP programming pins (PGECx/PGEDx) must be accessible for in-circuit programming; routing them to a 6-pin header is essential for field updates. The graphics controller consumes significant DMA bandwidth; when enabling both USB OTG and EPMP simultaneously, verify DMA channel priorities in the datasheet section on system integration. Use the latest MPLAB X IDE with XC16 compiler v2.0 or later for proper C99 support.
규정 준수 정보
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - choose PIC24FJ128DA206T-I/PT-E for AEC-Q100 automotive variants (not currently listed).
