PIC24FJ128DA106T-I/MR - 16-bit 32MHz 128KB Flash MCU | Microchip
부품 번호: PIC24FJ128DA106T-I/MR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.5 | $7.50 |
| 10 | $6.95 | $69.50 |
| 100 | $6.2 | $620.00 |
| 500 | $5.45 | $2,725.00 |
| 1,000 | $4.85 | $4,850.00 |
PIC24FJ128DA106T-I/MR 개요
A 16-bit microcontroller (MCU) is a microprocessor that fetches, decodes, and executes 16-bit instructions in a single cycle, offering higher code density and arithmetic precision than 8-bit cores while remaining easier to program than 32-bit ARM Cortex devices. In the broader taxonomy, the PIC24FJ128DA106 belongs to the 16-bit MCU class -> general-purpose microcontroller -> embedded microcontroller -> integrated circuit. The 'DA' suffix denotes the graphics-controller sub-family within Microchip's PIC24F line, which targets cost-sensitive graphical UI designs that previously needed an external LCD controller.
Key features of this device include its 32 MHz core with 16 MIPS throughput, hardware USB 2.0 full-speed On-The-Go with physical-layer transceiver, an integrated 480 x 272 capable display controller, parallel master port (PMP) for direct bus attachment to LCD panels, and multiple connectivity peripherals (UART, SPI, I2C, IrDA). It also provides up to 53 general-purpose I/O pins and several 16-bit timers suitable for RTOS-based designs. The wide operating voltage range and rich peripheral set allow the same silicon to span consumer, industrial, and battery-powered HMI products.
The PIC24FJ128DA106 architecture uses a 16-bit modified Harvard core with hardware multiply, hardware divide, and a 16 x 16-bit working register array. The display pipeline offloads pixel blitting and font rendering from the CPU, leaving MIPS budget for application logic and communication stacks. Internal Phase-Locked Loop (PLL) synthesizes the 32 MHz system clock from the on-chip 8 MHz oscillator, and a real-time clock calendar (RTCC) module supports timekeeping during low-power modes.
Typical applications include handheld medical-device HMIs, industrial control panels with TFT displays, USB-equipped data loggers, smart-home thermostats with color LCD, and portable instrumentation. The combination of native USB, graphics acceleration, and 128 KB FLASH lets designers ship a full graphical UI plus USB stack on a single chip.
When designing with this part, allocate sufficient PCB area for the 9 x 9 mm VQFN exposed pad, which must be soldered to a continuous copper plane for both thermal dissipation and ground integrity. Decouple VDD/VUSB with 100 nF + 4.7 uF capacitors placed within 5 mm of each supply pin, and follow Microchip application note AN1367 for the USB-OTG board layout checklist.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving procurement and design engineers a consolidated view of the part for engineering decisions.
드롭인 대체품: PIC24FJ128DA106T-I/MR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24FJ128DA106T-I/MR (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Program Memory (Flash), Operating Temperature, USB.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC24FJ128DA106-I/MR
✅ 드롭인✓ 재고 있음
$2.4 / 개
데이터시트 보기 →PIC24FJ256DA106-I/MR
✅ 드롭인✓ 재고 있음
$6.25 / 개
데이터시트 보기 →PIC24FJ256DA206-I/MR
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$6.8 / 개
데이터시트 보기 →PIC24FJ128GA006-I/MR
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.21 / 개
데이터시트 보기 →PIC24FJ128DA106T-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC24FJ128DA106T-I/MR 최대 정격 & 전기적 특성
| Core Architecture | PIC 16-bit (modified Harvard) |
| Core Series | PIC24F-DA family |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Program Memory (FLASH) | 128 KB (43K x 24 words) |
| Data Memory (RAM) | 24 KB |
| Operating Voltage Range | 2.0 V to 3.6 V |
| 패키지 | 64-pin VQFN (9 x 9 mm, MR) with exposed pad |
| USB Interface | USB 2.0 Full-Speed OTG with on-chip transceiver |
| Graphics Controller | Integrated, supports up to 4.3" WQVGA 480 x 272 |
| Display Interface | Parallel Master Port (PMP) |
| Communication Peripherals | I2C, IrDA, SPI, UART/USART, USB OTG |
| Timers | Multiple 16-bit timers (count per datasheet) |
| GPIO Pins (approximate) | Up to 53 |
| 동작 온도 범위 | -40C to +85C (Industrial) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
PIC24FJ128DA106T-I/MR 핀 구성
| 핀 1 | RP15/PMA10/PMD10/RB15 — Remappable peripheral / PMP data; see datasheet Table for full multiplex |
| 핀 2 | RP14/PMA9/PMD9/RB14 — Remappable peripheral / PMP data |
| 핀 3 | RP13/PMD13/ANN1/RB13 — Remappable peripheral / analog input |
| 핀 4 | RP12/PMD12/ANN0/RB12 — Remappable peripheral / analog input |
| 핀 5 | RP11/PMD11/RB11 — Remappable peripheral / PMP data |
| 핀 6 | VDD — Positive supply (2.0V to 3.6V) |
| 핀 7 | RP10/PMD10/RB10 — Remappable peripheral / PMP data |
| 핀 8 | RP9/PMD9/RB9 — Remappable peripheral / PMP data |
| 핀 9 | RP8/PMD8/RB8 — Remappable peripheral / PMP data |
| 핀 10 | RP7/PMD7/RB7 — Remappable peripheral / PMP data |
| 핀 11 | RP6/PMD6/RB6 — Remappable peripheral / PMP data |
| 핀 12 | RP5/PMD5/RB5 — Remappable peripheral / PMP data |
| 핀 13 | RP4/PMD4/RB4 — Remappable peripheral / PMP data |
| 핀 14 | RP3/PMD3/RB3 — Remappable peripheral / PMP data |
| 핀 15 | RP2/PMD2/RB2 — Remappable peripheral / PMP data |
| 핀 16 | RP1/PMD1/RB1 — Remappable peripheral / PMP data |
| 핀 17 | RP0/PMD0/RB0 — Remappable peripheral / PMP data |
| 핀 18 | VSS — Ground reference |
| 핀 19 | VDD — Positive supply (2.0V to 3.6V) |
| 핀 20 | RA0 — PORTA digital I/O |
| 핀 21 | RA1 — PORTA digital I/O |
| 핀 22 | RA2 — PORTA digital I/O |
| 핀 23 | RA3 — PORTA digital I/O |
| 핀 24 | RA4 — PORTA digital I/O |
| 핀 25 | RA5 — PORTA digital I/O |
| 핀 26 | RA6 — PORTA digital I/O |
| 핀 27 | RA7 — PORTA digital I/O |
| 핀 28 | RC0 — PORTC digital I/O |
| 핀 29 | RC1 — PORTC digital I/O |
| 핀 30 | RC2 — PORTC digital I/O |
| 핀 31 | RC3 — PORTC digital I/O |
| 핀 32 | RC4 — PORTC digital I/O |
| 핀 33 | RC5 — PORTC digital I/O |
| 핀 34 | VSS — Ground reference |
| 핀 35 | RC6 — PORTC digital I/O |
| 핀 36 | RC7 — PORTC digital I/O |
| 핀 37 | RC8 — PORTC digital I/O |
| 핀 38 | RC9 — PORTC digital I/O |
| 핀 39 | RD0 — PORTD digital I/O |
| 핀 40 | RD1 — PORTD digital I/O |
| 핀 41 | RD2 — PORTD digital I/O |
| 핀 42 | RD3 — PORTD digital I/O |
| 핀 43 | RD4 — PORTD digital I/O |
| 핀 44 | RD5 — PORTD digital I/O |
| 핀 45 | RD6 — PORTD digital I/O |
| 핀 46 | RD7 — PORTD digital I/O |
| 핀 47 | RD8 — PORTD digital I/O |
| 핀 48 | RD9 — PORTD digital I/O |
| 핀 49 | RD10 — PORTD digital I/O |
| 핀 50 | RD11 — PORTD digital I/O |
| 핀 51 | RD12 — PORTD digital I/O |
| 핀 52 | RD13 — PORTD digital I/O |
| 핀 53 | RD14 — PORTD digital I/O |
| 핀 54 | RD15 — PORTD digital I/O |
| 핀 55 | VSS — Ground reference |
| 핀 56 | RF0 — PORTF digital I/O |
| 핀 57 | RF1 — PORTF digital I/O |
| 핀 58 | RF2 — PORTF digital I/O |
| 핀 59 | RF3 — PORTF digital I/O |
| 핀 60 | RF4 — PORTF digital I/O |
| 핀 61 | RF5 — PORTF digital I/O |
| 핀 62 | VUSB3V3 — USB 3.3V regulator output |
| 핀 63 | D+ — USB D+ data line |
| 핀 64 | D- — USB D- data line |
일반적인 애플리케이션
PIC24FJ128DA106T-I/MR 적합 용도: 7 애플리케이션s: Industrial HMI Panels, Handheld Medical Devices, USB Data Loggers, Smart Home Thermostats, Portable Test & Measurement, Automotive Infotainment Peripherals, Point-of-Sale Terminals.
Industrial HMI Panels
The PIC24FJ128DA106T-I/MR's integrated graphics controller driving up to 4.3" WQVGA 480 x 272 panels, combined with 128 KB FLASH and 24 KB RAM, fits compact operator-interface panels used on factory equipment. The 32 MHz / 16 MIPS PIC24F core runs graphical UI plus a Modbus RTU slave stack concurrently, while the industrial -40C to +85C rating withstands cabinet temperatures near motors and drives. The exposed thermal pad of the 9 x 9 mm VQFN aids heat spreading at continuous USB-host operation.
추천
Handheld Medical Devices
Portable medical peripherals such as pulse oximeters and glucose meters benefit from the PIC24FJ128DA106T-I/MR's USB OTG and 16-bit deterministic interrupt latency. The 128 KB FLASH holds USB CDC plus a small RTOS plus the application, while 24 KB RAM supports sample buffers and protocol stacks. Low-power sleep modes plus the 2.0 V to 3.6 V supply range enable battery operation from a single Li-ion cell.
추천
USB Data Loggers
The PIC24FJ128DA106T-I/MR's hardware USB 2.0 Full-Speed OTG with on-chip transceiver eliminates external PHY cost in USB stick-style data loggers. The 32 MHz core streams data over USB while writing to external EEPROM via SPI or I2C. The 128 KB FLASH stores USB stack plus logging firmware, and 24 KB RAM buffers measurement bursts before bulk transfer.
추천
Smart Home Thermostats
Color-LCD thermostats pair the PIC24FJ128DA106T-I/MR's display controller with WiFi companion chips over UART/SPI. The integrated PMP bus directly attaches TFT panels without an external LCD controller, reducing BOM cost. Real-time-clock calendar (RTCC) plus 24 KB RAM schedule HVAC setpoints across time zones while the display shows animated weather widgets.
추천
Portable Test & Measurement
Handheld DMMs and oscilloscope probes use the PIC24FJ128DA106T-I/MR for its 16-bit ADC support, USB OTG for PC connectivity, and graphics output for local waveform display. The 128 KB FLASH holds USBTMC plus signal-processing libraries, and 24 KB RAM buffers acquisition samples. The 9 x 9 mm VQFN keeps the BOM footprint under 100 mm squared.
추천
Automotive Infotainment Peripherals
Non-safety in-cabin accessories such as rear-seat entertainment remote controls or HVAC knob modules can leverage the PIC24FJ128DA106T-I/MR for its USB OTG plus graphics capability. The 2.0 V to 3.6 V supply tolerates automotive cranking transients when paired with an external regulator, and the 32 MHz core handles LIN-style stacks plus UI logic. For AEC-Q100 qualified variants Microchip offers the PIC24FJ128DA106-I/MR with automotive grade.
추천
Point-of-Sale Terminals
Compact POS terminals use the PIC24FJ128DA106T-I/MR's USB OTG for printer/peripheral connectivity and the graphics controller for customer-facing displays. The 128 KB FLASH holds a USB stack plus EMV-style transaction firmware, while 24 KB RAM supports temporary transaction buffers. The exposed thermal pad enables continuous USB-host operation without throttling.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24FJ128DA106T-I/MR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24FJ128DA106-I/MR | PIC24FJ256DA106-I/MR | PIC24FJ256DA206-I/MR | PIC24FJ128GA006-I/MR | PIC24FJ128DA106T-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | VQFN-64 (9x9 mm, MR) | VQFN-64 (9x9 mm, MR) - same | VQFN-64 (9x9 mm, MR) - same | VQFN-64 (9x9 mm, MR) - same | VQFN-64 (9x9 mm, MR) - same | TQFP-64 (10x10 mm, PT) - different |
| Core Speed | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) |
| FLASH Memory | 128 KB | 128 KB | 256 KB | 256 KB | 128 KB | 128 KB |
| RAM Memory | 24 KB | 24 KB | 32 KB | 32 KB | 24 KB | 24 KB |
| USB OTG | Yes (integrated PHY) | Yes (integrated PHY) | Yes (integrated PHY) | Yes (integrated PHY) | Yes (integrated PHY) | Yes (integrated PHY) |
| Graphics Controller | Up to 4.3" WQVGA 480x272 | Up to 4.3" WQVGA 480x272 | Up to 4.3" WQVGA 480x272 | Enhanced graphics pipeline | None | Up to 4.3" WQVGA 480x272 |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
주요 차별점
- Integrated USB 2.0 Full-Speed OTG with on-chip transceiver (vs External USB PHY implementations)
- Integrated graphics controller up to 4.3" WQVGA 480x272 (vs PIC24FJ128GA006-I/MR)
- Higher memory variant available in same footprint (vs PIC24FJ256DA106-I/MR)
- Wide 2.0 V to 3.6 V supply range (vs 5V-only MCUs)
설계 노트
The VQFN-64 (9 x 9 mm, MR) package has an exposed thermal pad on its underside that must be soldered to a continuous copper plane for both thermal dissipation and ground integrity. For USB-host applications where the part dissipates up to ~0.5 W sustained, allocate at least 1 square inch of 2 oz copper to the EP land. Without proper EP soldering, junction temperature may rise 8-12 C above ambient and the USB transceiver can fail USB compliance at elevated temperatures.
Place 100 nF + 4.7 uF ceramic decoupling capacitors within 5 mm of each VDD pin and a single 10 uF bulk capacitor near the package. The USB D+/D- traces must be 90 ohm differential with length matching to within 150 mil; follow Microchip application note AN1367 for the USB-OTG layout checklist. Keep the VUSB3V3 capacitor within 2 mm of pin 62 to ensure clean USB rail.
Do not apply voltage above 3.6 V to any supply pin - the part is specified for 2.0 V to 3.6 V only. When migrating firmware from PIC24FJ128GA006 to this part, note that the graphics controller registers occupy the same SFR map as PMP registers on the GA006, so initialization order must follow the DA106 sequence to avoid bus contention. The 'T' suffix indicates tape-and-reel packaging only and has no electrical significance.
Route the PMP/parallel master port data lines (PMD0-PMD15) with matched lengths within 1 inch and keep them on the same routing layer as the display connector to avoid skew on TFT panels. Maintain at least 3W spacing between PMP traces and USB differential pairs to avoid coupling noise into the USB eye diagram. Place the TFT connector within 50 mm of the MCU to keep PMP traces short.
규정 준수 정보
RoHS compliant per Microchip product page. Not AEC-Q100 qualified for automotive safety applications - use Microchip automotive-grade PIC24 variants if needed. Lead-free and halogen-free per Microchip environmental compliance documentation.
