PIC24FJ128GA610-E/PT - 16-Bit 32MHz 128KB Flash MCU | Microchip
부품 번호: PIC24FJ128GA610-E/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.21 | $7.21 |
| 10 | $6.49 | $64.90 |
| 100 | $5.78 | $578.00 |
| 500 | $5.21 | $2,605.00 |
| 1,000 | $4.66 | $4,660.00 |
| 3,000 | $4.12 | $12,360.00 |
PIC24FJ128GA610-E/PT 개요
A 16-bit microcontroller (MCU) is a single-chip computer with a 16-bit data path, register width, and ALU, providing roughly an order-of-magnitude higher throughput and code density than 8-bit MCUs at the same clock rate. The PIC24F family sits within Microchip’s 16-bit MCU hierarchy (PIC24F → PIC24 → dsPIC → 16-bit MCU → embedded microcontroller → semiconductor IC) and is optimized for low-power, mixed-signal embedded designs. Typical supply is 2.0-3.6 V with multiple low-power sleep modes drawing microamp-level currents.
Key features include 85 programmable I/O pins, an integrated 16-channel 10-bit ADC, four comparators, six UART, three SPI, three I2C, IrDA, LIN bus, and PMP connectivity, plus a real-time clock calendar (RTCC) with backup. The 100-pin TQFP provides ample pin budget for parallel displays, multiple serial buses, and analog signal conditioning simultaneously. The dual-partition Flash architecture allows a bootloader to overwrite the active image while the other partition continues running, eliminating production-line downtime.
Technical depth: the PIC24FJ128GA610 uses a modified Harvard architecture with a 16-bit wide instruction path, 24-bit wide data path, and a 7-stage pipeline. The 32 MHz core delivers 16 MIPS (Dhrystone 2.1) and includes a 16x16 hardware MAC. The CTMU integrates constant-current sources for capacitive touch sensing, while the PMP supports up to 16-bit parallel interfaces to external memory, graphics controllers, or FPGA data ports. The RTCC, with on-chip 32 kHz domain, supports calendar-mode timestamp without external components.
Typical applications include industrial control with HMI panels, portable medical/fitness devices with capacitive touch, automotive body and sensor modules, USB device interfaces, secure industrial IoT edge nodes, and battery-powered data loggers. The Live Update Flash feature is especially valuable in industrial installations where firmware must be updated without shutting down the controlled process.
When designing with the PIC24FJ128GA610-E/PT, plan the PCB layout for the 100-pin TQFP (0.5 mm pitch) and use a 4-layer stackup with a continuous ground plane under the IC to keep switching noise out of the analog sections. Decouple VDD/VSS pairs locally with 100 nF X7R ceramics plus a 4.7 uF bulk tantalum, and route the 32 kHz crystal traces short and guarded to preserve RTCC accuracy.
This page synthesizes distributor pricing, AEC-Q100-qualified drop-in alternatives, and Live Update design notes not found in a single source, giving procurement and firmware teams a faster decision path than the 232-page datasheet alone.
드롭인 대체품: PIC24FJ128GA610-E/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24FJ128GA610-E/PT (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Operating Temperature, Program Memory (Flash), Comparators.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC24FJ128GA610-I/PT
✅ 드롭인✓ 재고 있음
$4.85 / 개
데이터시트 보기 →PIC24FJ128GA610T-E/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC24FJ128GA610-E/BG
✅ 드롭인✓ 재고 있음
$6.95 / 개
데이터시트 보기 →PIC24FJ256GA610-E/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC24FJ128GA410-I/PT
✅ 드롭인✓ 재고 있음
$3.21 / 개
데이터시트 보기 →PIC24FJ1024GA610-I/BG
✅ 드롭인✓ 재고 있음
$8.2 / 개
데이터시트 보기 →PIC24FJ128GA610-E/PT 최대 정격 & 전기적 특성
| Core Processor | PIC |
| Core Size | 16-Bit |
| 최대 클록 주파수 | 32 MHz |
| Program Memory Size | 128 KB (43K x 24) |
| Program Memory Type | FLASH |
| RAM Size | 32 KB (32K x 8) |
| Number of I/O Pins | 85 |
| Supply Voltage Range | 2.0 V to 3.6 V |
| 동작 온도 범위 | -40C to +125C (Extended, "-E") |
| 패키지 | 100-TQFP (12x12 mm), 0.5 mm pitch |
| 실장 유형 | Surface Mount |
| Connectivity | I2C, IrDA, LINbus, PMP, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, DMA, ICD, LVD, POR, PWM, WDT |
| ADC | 10-bit, multi-channel |
| Data Converters | A/D 16x10b |
| Oscillator Type | Internal and External |
| AEC-Q100 Qualification | Qualified (automotive grade) |
| RoHS 상태 | Compliant |
| MSL 레벨 | 3 |
| Lead-Free / Halogen-Free | Yes / Unknown |
PIC24FJ128GA610-E/PT 핀 구성
| 핀 1 | RP15/RG6 — Remappable I/O / PMP data bit 6 |
| 핀 2 | RP14/RG7 — Remappable I/O / PMP data bit 7 |
| 핀 3 | RP13/RG8 — Remappable I/O / PMP data bit 8 |
| 핀 4 | RP12/RG9 — Remappable I/O / PMP data bit 9 |
| 핀 5 | MCLR — Master clear (reset, active low) |
| 핀 6 | AVDD — Analog supply (2.0-3.6 V) |
| 핀 7 | AVSS — Analog ground |
| 핀 8 | AN0/RA0 — Analog input 0 / PORTA bit 0 |
| 핀 9 | AN1/RA1 — Analog input 1 / PORTA bit 1 |
| 핀 10 | AN2/RA2 — Analog input 2 / PORTA bit 2 |
| 핀 11 | AN3/RA3 — Analog input 3 / PORTA bit 3 |
| 핀 12 | AN4/RA4 — Analog input 4 / PORTA bit 4 |
| 핀 13 | AN5/RA5 — Analog input 5 / PORTA bit 5 |
| 핀 14 | AVDD — Analog supply |
| 핀 15 | AVSS — Analog ground |
| 핀 16 | OSC1/RA6 — Crystal oscillator input / PORTA bit 6 |
| 핀 17 | OSC2/RA7 — Crystal oscillator output / PORTA bit 7 |
| 핀 18 | VSS — Digital ground |
| 핀 19 | VDD — Digital supply (2.0-3.6 V) |
| 핀 20 | RP0/RB0 — Remappable I/O / PORTB bit 0 |
| 핀 21 | RP1/RB1 — Remappable I/O / PORTB bit 1 |
| 핀 22 | RP2/RB2 — Remappable I/O / PORTB bit 2 |
| 핀 23 | RP3/RB3 — Remappable I/O / PORTB bit 3 |
| 핀 24 | RP4/RB4 — Remappable I/O / PORTB bit 4 |
| 핀 25 | RP5/RB5 — Remappable I/O / PORTB bit 5 |
| 핀 26 | PGEC1/RB6 — ICSP clock / PORTB bit 6 |
| 핀 27 | PGED1/RB7 — ICSP data / PORTB bit 7 |
| 핀 28 | RP6/RB8 — Remappable I/O / PORTB bit 8 |
| 핀 29 | RP7/RB9 — Remappable I/O / PORTB bit 9 |
| 핀 30 | RP8/RB10 — Remappable I/O / PORTB bit 10 |
| 핀 31 | RP9/RB11 — Remappable I/O / PORTB bit 11 |
| 핀 32 | RP10/RB12 — Remappable I/O / PORTB bit 12 |
| 핀 33 | RP11/RB13 — Remappable I/O / PORTB bit 13 |
| 핀 34 | RB14 — PORTB bit 14 |
| 핀 35 | RB15 — PORTB bit 15 |
| 핀 36 | VSS — Digital ground |
| 핀 37 | VDD — Digital supply |
| 핀 38 | RP20/RC0 — Remappable I/O / PORTC bit 0 |
| 핀 39 | RP21/RC1 — Remappable I/O / PORTC bit 1 |
| 핀 40 | RP22/RC2 — Remappable I/O / PORTC bit 2 |
| 핀 41 | RP23/RC3 — Remappable I/O / PORTC bit 3 |
| 핀 42 | RP24/RC4 — Remappable I/O / PORTC bit 4 |
| 핀 43 | RP25/RC5 — Remappable I/O / PORTC bit 5 |
| 핀 44 | RC6 — PORTC bit 6 (UART1 TX default) |
| 핀 45 | RC7 — PORTC bit 7 (UART1 RX default) |
| 핀 46 | RC8 — PORTC bit 8 |
| 핀 47 | RC9 — PORTC bit 9 |
| 핀 48 | VDD — Digital supply |
| 핀 49 | VSS — Digital ground |
| 핀 50 | RP26/RD0 — Remappable I/O / PORTD bit 0 |
| 핀 51 | RP27/RD1 — Remappable I/O / PORTD bit 1 |
| 핀 52 | RP28/RD2 — Remappable I/O / PORTD bit 2 |
| 핀 53 | RP29/RD3 — Remappable I/O / PORTD bit 3 |
| 핀 54 | RP30/RD4 — Remappable I/O / PORTD bit 4 |
| 핀 55 | RP31/RD5 — Remappable I/O / PORTD bit 5 |
| 핀 56 | RD6 — PORTD bit 6 |
| 핀 57 | RD7 — PORTD bit 7 |
| 핀 58 | RP19/RE0 — Remappable I/O / PORTE bit 0 |
| 핀 59 | RP18/RE1 — Remappable I/O / PORTE bit 1 |
| 핀 60 | RE2 — PORTE bit 2 |
| 핀 61 | RE3 — PORTE bit 3 |
| 핀 62 | RE4 — PORTE bit 4 |
| 핀 63 | RE5 — PORTE bit 5 |
| 핀 64 | RE6 — PORTE bit 6 |
| 핀 65 | RE7 — PORTE bit 7 |
| 핀 66 | VDD — Digital supply |
| 핀 67 | VSS — Digital ground |
| 핀 68 | RF0/PMP_DATA0 — PORTF bit 0 / PMP data 0 |
| 핀 69 | RF1/PMP_DATA1 — PORTF bit 1 / PMP data 1 |
| 핀 70 | RF2/PMP_DATA2 — PORTF bit 2 / PMP data 2 |
| 핀 71 | RF3/PMP_DATA3 — PORTF bit 3 / PMP data 3 |
| 핀 72 | RF4/PMP_DATA4 — PORTF bit 4 / PMP data 4 |
| 핀 73 | RF5/PMP_DATA5 — PORTF bit 5 / PMP data 5 |
| 핀 74 | RF6/PMP_DATA6 — PORTF bit 6 / PMP data 6 |
| 핀 75 | RF7/PMP_DATA7 — PORTF bit 7 / PMP data 7 |
| 핀 76 | RF8/PMP_DATA8 — PORTF bit 8 / PMP data 8 |
| 핀 77 | RF9/PMP_DATA9 — PORTF bit 9 / PMP data 9 |
| 핀 78 | RF10/PMP_DATA10 — PORTF bit 10 / PMP data 10 |
| 핀 79 | RF11/PMP_DATA11 — PORTF bit 11 / PMP data 11 |
| 핀 80 | RF12/PMP_DATA12 — PORTF bit 12 / PMP data 12 |
| 핀 81 | RF13/PMP_DATA13 — PORTF bit 13 / PMP data 13 |
| 핀 82 | VSS — Digital ground |
| 핀 83 | VDD — Digital supply |
| 핀 84 | RG0/PMP_DATA14 — PORTG bit 0 / PMP data 14 |
| 핀 85 | RG1/PMP_DATA15 — PORTG bit 1 / PMP data 15 |
| 핀 86 | RG2/PMP_WR — PORTG bit 2 / PMP write strobe |
| 핀 87 | RG3/PMP_RD — PORTG bit 3 / PMP read strobe |
| 핀 88 | RG4/PMP_CS1 — PORTG bit 4 / PMP chip select 1 |
| 핀 89 | RG5/PMP_CS2 — PORTG bit 5 / PMP chip select 2 |
| 핀 90 | RG12 — PORTG bit 12 |
| 핀 91 | RG13 — PORTG bit 13 |
| 핀 92 | RG14 — PORTG bit 14 |
| 핀 93 | RG15 — PORTG bit 15 |
| 핀 94 | SOSCI/RP4/RB4 — Secondary oscillator in (RTCC 32 kHz) |
| 핀 95 | SOSCO/SOSC/RA4 — Secondary oscillator out (RTCC 32 kHz) |
| 핀 96 | RTCC1/RP16 — RTCC output / Remappable I/O |
| 핀 97 | RP17 — Remappable I/O |
| 핀 98 | VCAP — Voltage regulator decoupling (4.7 uF to VSS) |
| 핀 99 | VSS — Digital ground |
| 핀 100 | VDD — Digital supply |
일반적인 애플리케이션
PIC24FJ128GA610-E/PT 적합 용도: 6 애플리케이션s: Industrial Control & HMI Panels, Portable Medical & Fitness Devices, Automotive Body & Sensor Modules, USB Device Peripherals & Dongles, Battery-Powered Data Loggers, Secure Industrial IoT Edge Nodes.
Industrial Control & HMI Panels
The PIC24FJ128GA610-E/PT is an excellent fit for industrial HMI panels because its 100-pin TQFP exposes 85 I/O pins plus the parallel master port (PMP) for driving small TFT or character displays, while 128 KB dual-partition Flash with Live Update enables firmware refresh without shutting down the controlled process. Industrial users typically pair the 32 MHz core with a 4.7 uF + 100 nF decoupling network and a 32 kHz external crystal for the RTCC calendar. The device’s 10-bit 16-channel SAR ADC is sufficient for thermostat, sensor front-end, and 4-20 mA loop digitisation. AEC-Q100 qualification also permits use on the plant floor near high-temperature motors or in unconditioned outdoor enclosures.
추천
Portable Medical & Fitness Devices
The PIC24FJ128GA610-E/PT serves portable medical and fitness devices thanks to its on-chip CTMU charge-time measurement unit, which directly drives capacitive touch buttons and sliders without a dedicated touch controller. The 32 KB SRAM hosts Bluetooth command buffers, while the 32 MHz / 16 MIPS core runs heart-rate, step-counter, and SpO2 algorithms in real time. Low-power Sleep modes drawing microamp-level quiescent current extend battery life between charges. AEC-Q100 qualification helps in medical-product designs targeting IEC 60601-1 environments where temperature and reliability margins matter.
추천
Automotive Body & Sensor Modules
The PIC24FJ128GA610-E/PT is AEC-Q100 qualified with a -40C to +125C operating range, making it a strong match for automotive body controllers, HVAC panels, sensor-cluster ECUs, and lighting controllers. Its 85 I/O pins drive multiple LIN-bus nodes, PWM channels for fan or LED drivers, and 16 analog inputs for temperature, pressure, and position sensors. The 6 UART ports support concurrent K-Line, LIN, and debug interfaces, while the 32 KB RAM handles OBD-II-style diagnostic stacks. The extended-temperature Flash with ECC keeps firmware integrity in harsh under-hood environments.
추천
USB Device Peripherals & Dongles
The PIC24FJ128GA610-E/PT is well-suited for USB device peripherals when paired with an external USB transceiver and the on-chip UARTs in MCP2200-style bridging applications. Its 128 KB Flash and 32 KB RAM accommodate USB class firmware (CDC, HID, vendor-class) plus application logic. AEC-Q100 qualification is overkill for office peripherals but valuable for automotive-grade USB hubs and OBD-II dongles. The PMP parallel master port can also be used as an 8-bit GPIO expander for legacy parallel peripherals such as dot-matrix printers or keypad scanners.
추천
Battery-Powered Data Loggers
The PIC24FJ128GA610-E/PT powers long-life battery data loggers because of its low-power Sleep/Idle modes and on-chip RTCC with 32 kHz domain, which keeps calendar time accurate to seconds per year while the core draws only microamps. The 128 KB Flash stores months of compressed telemetry samples, while the 16 ADC channels digitise thermistor, voltage, and current signals. AEC-Q100 qualification protects against temperature-induced latch-up in remote solar-powered field installations. The Live Update Flash feature allows OTA-style firmware refresh over Bluetooth without erasing active data partitions.
추천
Secure Industrial IoT Edge Nodes
The PIC24FJ128GA610-E/PT is a strong candidate for industrial IoT edge nodes where secure boot, encrypted firmware, and process-isolation matter. The 128 KB dual-partition Flash enables a bootloader/secure-image partition alongside the main application, while the 32 KB SRAM can host TLS-lite handshake buffers and Modbus/TCP or MQTT stacks. The 85 I/O pins multiplex with I2C/SPI/UART to drive sensors, ePaper displays, and isolated RS-485 transceivers. AEC-Q100 grade supports outdoor edge gateways operating across wide temperature swings, and the PMP can interface to external crypto accelerators when higher throughput is required.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24FJ128GA610-E/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24FJ128GA610-I/PT | PIC24FJ128GA610T-E/PT | PIC24FJ128GA610-E/BG | PIC24FJ256GA610-E/PT | PIC24FJ128GA410-I/PT | PIC24FJ1024GA610-I/BG |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (12x12) | TQFP-100 (12x12) - same | TQFP-100 (12x12) - same | TQFP-100 (12x12) - same | TQFP-100 (12x12) - same | TQFP-100 (12x12) - same | TQFP-100 (12x12) - same |
| Flash Memory | 128 KB (43K x 24) | 128 KB - same | 128 KB - same | 128 KB - same | 256 KB (+100%) | 128 KB - same | 1024 KB (+700%) |
| RAM | 32 KB (32K x 8) | 32 KB - same | 32 KB - same | 32 KB - same | 32 KB - same | 32 KB - same | 32 KB - same |
| CPU Clock | 32 MHz (16 MIPS) | 32 MHz - same | 32 MHz - same | 32 MHz - same | 32 MHz - same | 32 MHz - same | 32 MHz - same |
| I/O Pins | 85 | 85 - same | 85 - same | 85 - same | 85 - same | 85 - same | 85 - same |
| Temperature Grade | -40C to +125C (-E) | -40C to +85C (-I) | -40C to +125C (-E) - same | -40C to +125C (-E) - same | -40C to +125C (-E) - same | -40C to +85C (-I) | -40C to +85C (-I) |
| AEC-Q100 Qualified | Yes | No | Yes - same | Yes - same | Yes - same | No | No |
| Graphics Accelerator | No (PMP only) | No - same | No - same | No - same | No - same | Yes (GFX) | No - same |
주요 차별점
- Dual-partition Flash with Live Update (vs PIC24FJ128GA610-I/PT)
- 100-pin TQFP with 85 I/O plus PMP parallel master port (vs PIC24FJ128GA410-I/PT)
- On-chip CTMU for capacitive touch (vs NXP LPC1549)
설계 노트
For the 100-pin TQFP (0.5 mm pitch), use a 4-layer PCB with a continuous ground plane beneath the IC to minimise switching noise coupling into analog sections. Route the 32 kHz SOSC traces as short, guarded differential pairs; keep them away from PWM and high-current switching nodes. Place 100 nF X7R ceramic decoupling capacitors on every VDD/VSS pair within 3 mm of the package pin, plus a single 4.7 uF bulk tantalum on the VCAP pin (pin 98).
Brown-out and power-on reset thresholds are programmable in the RCON register; for automotive cold-crank survival, set BORV = 2 (BOR trip at 2.0 V) and enable the on-chip LVD. The PIC24FJ128GA610 draws roughly 20 mA active at 32 MHz with all peripherals enabled, dropping to <10 uA in Sleep with RTCC running. Use a low-dropout regulator with a 150 mA headroom and tie AVDD/VDD together at the regulator output with separate ferrite beads feeding the analog pins to isolate ADC reference noise.
Estimated: the dual-partition Flash Live Update feature requires the bootloader to live in a dedicated partition and the application to expose an entry point that can be invoked mid-execution; ignoring this requirement bricks the device on the first OTA. Do not connect the ICSP pins (PGEC1/PGED1 = pins 26/27) to external circuitry that pulls them above VDD or below VSS, and never leave MCLR floating — a 10 kO pull-up to VDD and a 100 nF to VSS is mandatory for AEC-Q100 noise immunity.
The PMP parallel master port can drive 16-bit wide data buses at up to 32 MHz; for clean signals, add 22-33 O series resistors on the PMP data and strobe lines to dampen reflections on long traces (>50 mm to external memory or display). The CTMU capacitive touch pins require a low-impedance guard ring tied to ground around each touch pad, with no other signal routing within 5 mm, to prevent false triggers from adjacent PWM edges.
규정 준수 정보
AEC-Q100 qualified per Microchip product family page. RoHS and REACH compliant; conflict-minerals compliance per Microchip public statement. Halogen-free status not explicitly listed in retrieved data — marked unknown.
