PIC24FJ512GU406T-I/PT - 512KB Flash, USB, 16-bit MCU | Microchip
부품 번호: PIC24FJ512GU406T-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $8.1 | $8.10 |
| 10 | $7.3 | $73.00 |
| 100 | $6.1 | $610.00 |
| 500 | $5.4 | $2,700.00 |
| 1,000 | $4.8 | $4,800.00 |
PIC24FJ512GU406T-I/PT 개요
드롭인 대체품: PIC24FJ512GU406T-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24FJ512GU406T-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package, Core Architecture, ADC, LCD Controller.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC24FJ256GU406-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.69 / 개
데이터시트 보기 →PIC24FJ128GU406-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$3.36 / 개
데이터시트 보기 →PIC24FJ512GU406-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$5.42 / 개
데이터시트 보기 →PIC24FJ512GU406T-I/PT 최대 정격 & 전기적 특성
| Core Architecture | PIC24F 16-bit RISC |
| CPU Core | PIC24F (PIC® 24F) |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Program Memory (Flash) | 512 KB (512K x 8) |
| RAM | 32 KB (32K x 8) |
| Flash Architecture | Dual Partition Flash for OTA updates and EEPROM emulation |
| 공급 전압 | 2.0 V to 3.6 V |
| Digital I/O Pins | 53 |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| LCD | Integrated segmented LCD driver |
| ADC | 12-bit, multi-channel |
| 동작 온도 범위 | -40C to +85C (Industrial) |
| 패키지 | 64-TQFP (10x10 mm) |
| 실장 유형 | Surface Mount |
| AEC-Q100 | Qualified (automotive grade) |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
PIC24FJ512GU406T-I/PT 64-tqfp (10x10 mm) 핀 구성 가이드
PIC24FJ512GU406T-I/PT(64-tqfp (10x10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC24FJ512GU406T-I/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC24FJ512GU406T-I/PT 적합 용도: 6 애플리케이션s: Automotive Instrument Cluster with LCD, USB-Connected Industrial Sensor Hub, Consumer Human Interface with OTA Updates, Battery-Powered Medical Monitor, Smart Home Control Panel with USB Commissioning, Secure IoT Edge Node with OTA Bootloader.
Automotive Instrument Cluster with LCD
The PIC24FJ512GU406T-I/PT drives automotive dashboard gauges using its integrated segmented LCD controller and 53 digital I/O pins. The AEC-Q100 Grade 1 qualification and -40C to +85C industrial temperature range make it suited for cabin environments with thermal stress. Up to 512 KB of dual-partition Flash lets automotive OEMs push firmware updates to clusters over CAN-to-USB bridges without service interruption, while the 12-bit ADC reads sensor inputs (vehicle speed, fuel level, temperature) with sufficient resolution for analog gauge rendering. CIPs (CLC, MCCP) handle backlight PWM and stepper-motor drive for needle control in hardware, freeing the CPU for display refresh and diagnostics.
추천
USB-Connected Industrial Sensor Hub
The PIC24FJ512GU406T-I/PT acts as a USB-Tethered sensor aggregator for industrial monitoring equipment. The full-speed USB 2.0 controller in Device mode appears on the host as a CDC virtual COM port or HID device, simplifying driver integration on Windows, Linux, and macOS hosts. The 12-bit ADC samples analog sensors while Core Independent Peripherals (CLC, MCCP) implement hardware-level signal conditioning and PWM generation. With 32 KB RAM and DMA-assisted USB endpoints, the device sustains high-rate data streaming without CPU bottleneck, and the 512 KB Flash holds sensor calibration tables and protocol stacks.
추천
Consumer Human Interface with OTA Updates
The PIC24FJ512GU406T-I/PT supports connected consumer products (e.g., smart thermostats, kitchen appliances, fitness equipment) that require user interfaces with segmented LCDs and remote firmware updates. Its dual-partition Flash architecture performs live OTA updates - the bootloader switches to the alternate partition without interrupting operation, ensuring zero downtime during security patches and feature releases. The integrated LCD driver cuts BOM cost by eliminating external display controllers, while 53 I/O pins accommodate keypads, rotary encoders, and indicator LEDs.
추천
Battery-Powered Medical Monitor
The PIC24FJ512GU406T-I/PT enables portable medical devices such as pulse oximeters, glucometers, and patient wearables that demand low power and reliable data logging. Multiple low-power sleep modes plus the segmented LCD driver maintain battery life by enabling the display without waking the CPU. CIPs handle timer-based sensor sampling and threshold detection in hardware, drawing microamp-level quiescent current. The 512 KB Flash stores patient logs and trend history, while the dual-partition capability supports regulatory firmware revisions without affecting deployed units in the field.
추천
Smart Home Control Panel with USB Commissioning
The PIC24FJ512GU406T-I/PT powers wall-mounted smart-home control panels that combine segmented LCDs, capacitive touch keys, and USB-C commissioning ports. The integrated USB 2.0 controller lets installers connect a laptop or smartphone for first-time provisioning, firmware updates, and diagnostics - replacing costly JTAG/SWD tools. With 53 GPIO pins, the MCU directly drives segmented LCD glass, RGB LEDs, relay outputs, and Zigbee/Wi-Fi module interfaces. The 32 KB RAM supports full TCP/IP stacks over external Wi-Fi modules via SPI.
추천
Secure IoT Edge Node with OTA Bootloader
The PIC24FJ512GU406T-I/PT serves as an IoT edge node with built-in secure boot and OTA firmware-update capability. Its dual-partition Flash architecture hosts both the active firmware and the update image simultaneously, allowing atomic swap-over with CRC verification. The full-speed USB interface supports tethered commissioning and firmware update via PC tools, while 53 I/O pins accommodate multiple sensors (temperature, humidity, motion) and actuator drivers. CIPs implement event-triggered sensor fusion and power gating without CPU intervention.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24FJ512GU406T-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24FJ256GU406-I/PT | PIC24FJ128GU406-I/PT | PIC24FJ512GU406-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Program Flash | 512 KB | 256 KB | 128 KB | 512 KB |
| RAM | 32 KB | 32 KB | 32 KB | 32 KB |
| Maximum CPU Speed | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) |
| USB | Full-Speed USB 2.0 Device/Host/OTG | Full-Speed USB 2.0 Device/Host/OTG | Full-Speed USB 2.0 Device/Host/OTG | Full-Speed USB 2.0 Device/Host/OTG |
| LCD Controller | Yes (segmented) | Yes | Yes | Yes |
| Dual-Partition Flash (OTA) | Yes | Yes | Yes | Yes |
| Digital I/O Pins | 53 | 53 | 53 | 53 |
| AEC-Q100 | Qualified (Grade 1) | Qualified (Grade 1) | Qualified (Grade 1) | Qualified (Grade 1) |
| Approx Unit Price (qty 1) | $8.10 | Lower (smaller Flash) | Lower (smallest Flash) | Same |
주요 차별점
- Dual-Partition Flash with OTA capability (vs PIC24FJ256GU406-I/PT)
- Full-speed USB 2.0 with OTG (vs PIC24FJ512GL406-I/PT)
- 53 GPIO and integrated LCD driver (vs PIC24FJ128GU406-I/PT)
설계 노트
The PIC24FJ512GU406T-I/PT operates from 2.0 V to 3.6 V and the USB transceiver requires a regulated 3.3 V rail; design the PCB with separate analog (VDD) and digital (VDDCORE) supply pins and decouple each with a 100 nF ceramic capacitor placed within 5 mm of the supply pins. For USB operation, follow the datasheet's VBUS sense and pull-up resistor guidance to maintain USB-IF compliance. Estimated: at 32 MHz CPU and full peripheral load, the supply current budget is 30-40 mA, leaving margin for USB suspend-mode power constraints.
Place the 32.768 kHz crystal (SOSCO/SOSCI) within 5 mm of the MCU with short symmetric traces, and surround it with a ground guard ring to minimize RTCC jitter. For the integrated LCD driver, route the SEG and COM traces away from high-speed digital lines and add a ground plane beneath the LCD glass connections to reduce coupling noise. The USB DP/DN differential pair requires 90-ohm differential impedance with length matching within 150 mil per the USB 2.0 specification.
Do not exceed 3.6 V on any I/O pin - even brief over-voltage events can latch-up the device. Always configure unused I/O pins as outputs driving low per Microchip application note recommendations. When using the dual-partition Flash for OTA updates, the bootloader must verify the new image's CRC32 before swapping partitions to avoid bricking; reference the Microchip OTA bootloader library (TB3215) for a reference implementation.
규정 준수 정보
AEC-Q100 Grade 1 qualified per Microchip product documentation. RoHS and REACH compliant. Lead-free and halogen-free package per Microchip material declarations.
