PIC24FJ64GB410T-I/PT - 64KB Flash USB OTG 16-bit MCU | Microchip
부품 번호: PIC24FJ64GB410T-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $6.2 | $6.20 |
| 10 | $5.72 | $57.20 |
| 100 | $5.18 | $518.00 |
| 500 | $4.65 | $2,325.00 |
| 1,000 | $4.12 | $4,120.00 |
PIC24FJ64GB410T-I/PT 개요
A PIC24F microcontroller is a 16-bit Modified Harvard architecture MCU from Microchip's PIC24 family that delivers up to 16 MIPS performance while consuming only nanoWatt standby currents. It sits within the broader taxonomy: microcontroller -> embedded controller -> semiconductor. The 16-bit datapath, 24-bit instruction word, and DSP-friendly instruction set make PIC24F devices well suited to signal processing, USB, and graphics tasks that exceed 8-bit MCU capability but do not justify a 32-bit ARM Cortex-M part.
The PIC24FJ64GB410T-I/PT features a 32 MHz maximum CPU clock (16 MIPS core throughput with 2:1 instruction cycle), 64KB Flash organized as 22K x 24 words with dual-partition live-update support, 8KB SRAM, and dedicated peripherals including a hardware cryptographic engine, USB 2.0 Full-Speed OTG with physical interface, segmented LCD controller supporting up to 480 segments, multiple UART/SPI/I2C modules, 12-bit ADC, and multiple PWM/CCP/Capture channels. XLP technology places nanoWatt sleep currents below 20 nA in deep sleep.
Architecturally, the device integrates an internal 8 MHz FRC oscillator with PLL options, a separate 32 kHz secondary oscillator for low-power RTC, and a peripheral pin select (PPS) engine for flexible I/O mapping. The hardware crypto engine accelerates AES, DES, 3DES, and SHA-1/MD5, offloading security routines from the core and reducing firmware footprint.
Typical applications include secure USB connected IoT nodes, battery-powered industrial sensors with LCD display, secure point-of-sale terminals, metering and medical portable devices, encrypted data loggers, and human-machine interface panels. The integrated LCD controller plus crypto acceleration is a distinctive combination rarely found at this price/power point.
When designing with this part, allocate sufficient PCB area for the 100-pin TQFP land pattern and follow Microchip's USB hardware checklist for the OTG transceiver (90 ohm differential pair routing, VBUS sensing, and proper cable shield grounding).
This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same PIC24FJ GB4 family, and practical design notes - including USB hardware and LCD biasing guidance - that go beyond what the manufacturer datasheet alone provides.
드롭인 대체품: PIC24FJ64GB410T-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24FJ64GB410T-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, Operating Temperature, Core Architecture, Program Memory (Flash).
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC24FJ128GB410-I/PT
✅ 드롭인✓ 재고 있음
$3.15 / 개
데이터시트 보기 →PIC24FJ256GB410-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC24FJ64GB410-I/PT
✅ 드롭인✓ 재고 있음
$2.39 / 개
데이터시트 보기 →PIC24FJ64GB410T-I/PTG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC24FJ512GU406T-I/PT
✅ 드롭인✓ 재고 있음
$4.8 / 개
데이터시트 보기 →PIC24FJ64GB410T-I/PT 최대 정격 & 전기적 특성
| Core Architecture | PIC24F 16-bit Modified Harvard |
| CPU Speed | 32 MHz max (16 MIPS) |
| Program Memory (Flash) | 64 KB (22K x 24) dual partition |
| Data Memory (SRAM) | 8 KB |
| USB Interface | USB 2.0 Full-Speed OTG with PHY |
| Cryptographic Engine | Hardware AES, DES, 3DES, SHA-1, MD5 |
| LCD Controller | Segmented LCD, up to 480 segments |
| Low-Power Mode (XLP) | nanoWatt sleep, <20 nA typical |
| Operating Voltage (VDD) | 2.0 V to 3.6 V |
| ADC | 12-bit, multi-channel |
| 동작 온도 | -40C to +85C (industrial) |
| 패키지 | 100-pin TQFP (12x12 mm) |
| 실장 유형 | Surface Mount |
| MSL 레벨 | 3 (168 hours) |
| RoHS 상태 | Compliant |
| DMA Channels | 8 channels |
PIC24FJ64GB410T-I/PT 핀 구성
| 핀 1 | RP15/RB15 — Remappable I/O / LCD segment |
| 핀 2 | RP14/RB14 — Remappable I/O / LCD segment |
| 핀 3 | RP13/RB13 — Remappable I/O / LCD segment |
| 핀 4 | RP12/RB12 — Remappable I/O / LCD segment |
| 핀 5 | RP11/RB11 — Remappable I/O / LCD segment |
| 핀 6 | RP10/RB10 — Remappable I/O / LCD segment |
| 핀 7 | RP9/RB9 — Remappable I/O / LCD segment |
| 핀 8 | RP8/RB8 — Remappable I/O / LCD segment |
| 핀 9 | RP7/RB7 — Remappable I/O / LCD segment |
| 핀 10 | RP6/RB6 — Remappable I/O / LCD segment |
| 핀 11 | RP5/RB5 — Remappable I/O / LCD segment |
| 핀 12 | RP4/RB4 — Remappable I/O / LCD segment |
| 핀 13 | VDD — Positive supply voltage (2.0V to 3.6V) |
| 핀 14 | RP3/RB3 — Remappable I/O / LCD segment |
| 핀 15 | RP2/RB2 — Remappable I/O / LCD segment |
| 핀 16 | RP1/RB1 — Remappable I/O / LCD segment |
| 핀 17 | RP0/RB0 — Remappable I/O / LCD segment |
| 핀 18 | VSS — Ground reference |
| 핀 19 | RA15 — PORTA pin / LCD segment |
| 핀 20 | RA14 — PORTA pin / LCD segment |
| 핀 21 | RA13 — PORTA pin / LCD segment |
| 핀 22 | RA12 — PORTA pin / LCD segment |
| 핀 23 | RA11 — PORTA pin / LCD segment |
| 핀 24 | RA10 — PORTA pin / LCD segment |
| 핀 25 | RA9 — PORTA pin / LCD segment |
| 핀 26 | RA8 — PORTA pin / LCD segment |
| 핀 27 | RA7 — PORTA pin / LCD segment |
| 핀 28 | RA6 — PORTA pin / LCD segment |
| 핀 29 | RC15 — PORTC pin / LCD segment |
| 핀 30 | RC14 — PORTC pin / LCD segment |
| 핀 31 | RC13 — PORTC pin / LCD segment |
| 핀 32 | RC12 — PORTC pin / LCD segment |
| 핀 33 | D+ — USB D+ data line |
| 핀 34 | D- — USB D- data line |
| 핀 35 | VBUS — USB VBUS sensing input |
| 핀 36 | VUSB3V3 — USB internal 3.3V regulator output |
| 핀 37 | VCAP — Voltage regulator decoupling cap |
| 핀 38 | VSS — Ground reference |
| 핀 39 | OSCI — Primary oscillator input |
| 핀 40 | OSCO — Primary oscillator output |
| 핀 41 | SOSCI — Secondary oscillator (32 kHz) input |
| 핀 42 | SOSCO — Secondary oscillator (32 kHz) output |
| 핀 43 | RD15 — PORTD pin / LCD segment |
| 핀 44 | RD14 — PORTD pin / LCD segment |
| 핀 45 | RD13 — PORTD pin / LCD segment |
| 핀 46 | RD12 — PORTD pin / LCD segment |
| 핀 47 | RD11 — PORTD pin / LCD segment |
| 핀 48 | RD10 — PORTD pin / LCD segment |
| 핀 49 | RD9 — PORTD pin / LCD segment |
| 핀 50 | RD8 — PORTD pin / LCD segment |
| 핀 51 | RD7 — PORTD pin / LCD segment |
| 핀 52 | RD6 — PORTD pin / LCD segment |
| 핀 53 | RD5 — PORTD pin / LCD segment |
| 핀 54 | RD4 — PORTD pin / LCD segment |
| 핀 55 | RD3 — PORTD pin / LCD segment |
| 핀 56 | RD2 — PORTD pin / LCD segment |
| 핀 57 | RD1 — PORTD pin / LCD segment |
| 핀 58 | RD0 — PORTD pin / LCD segment |
| 핀 59 | RE15 — PORTE pin / LCD segment |
| 핀 60 | RE14 — PORTE pin / LCD segment |
| 핀 61 | RE13 — PORTE pin / LCD segment |
| 핀 62 | RE12 — PORTE pin / LCD segment |
| 핀 63 | RE11 — PORTE pin / LCD segment |
| 핀 64 | RE10 — PORTE pin / LCD segment |
| 핀 65 | RE9 — PORTE pin / LCD segment |
| 핀 66 | RE8 — PORTE pin / LCD segment |
| 핀 67 | RE7 — PORTE pin / LCD segment |
| 핀 68 | RE6 — PORTE pin / LCD segment |
| 핀 69 | RE5 — PORTE pin / LCD segment |
| 핀 70 | RE4 — PORTE pin / LCD segment |
| 핀 71 | RE3 — PORTE pin / LCD segment |
| 핀 72 | RE2 — PORTE pin / LCD segment |
| 핀 73 | RE1 — PORTE pin / LCD segment |
| 핀 74 | RE0 — PORTE pin / LCD segment |
| 핀 75 | RF15 — PORTF pin / LCD segment |
| 핀 76 | RF14 — PORTF pin / LCD segment |
| 핀 77 | RF13 — PORTF pin / LCD segment |
| 핀 78 | RF12 — PORTF pin / LCD segment |
| 핀 79 | RF11 — PORTF pin / LCD segment |
| 핀 80 | RF10 — PORTF pin / LCD segment |
| 핀 81 | RF9 — PORTF pin / LCD segment |
| 핀 82 | RF8 — PORTF pin / LCD segment |
| 핀 83 | RF7 — PORTF pin / LCD segment |
| 핀 84 | RF6 — PORTF pin / LCD segment |
| 핀 85 | RF5 — PORTF pin / LCD segment |
| 핀 86 | RF4 — PORTF pin / LCD segment |
| 핀 87 | RF3 — PORTF pin / LCD segment |
| 핀 88 | RF2 — PORTF pin / LCD segment |
| 핀 89 | RF1 — PORTF pin / LCD segment |
| 핀 90 | RF0 — PORTF pin / LCD segment |
| 핀 91 | RG15 — PORTG pin / LCD segment |
| 핀 92 | RG14 — PORTG pin / LCD segment |
| 핀 93 | RG13 — PORTG pin / LCD segment |
| 핀 94 | RG12 — PORTG pin / LCD segment |
| 핀 95 | RG11 — PORTG pin / LCD segment |
| 핀 96 | RG10 — PORTG pin / LCD segment |
| 핀 97 | RG9 — PORTG pin / LCD segment |
| 핀 98 | RG8 — PORTG pin / LCD segment |
| 핀 99 | RG7 — PORTG pin / LCD segment |
| 핀 100 | MCLR — Master Clear (reset) input |
일반적인 애플리케이션
PIC24FJ64GB410T-I/PT 적합 용도: 6 애플리케이션s: Secure USB Connected IoT Nodes, Battery-Powered Industrial Sensor with LCD Display, Encrypted Data Loggers, Secure Point-of-Sale Terminals, Portable Medical Devices, Human-Machine Interface (HMI) Panels.
Secure USB Connected IoT Nodes
The PIC24FJ64GB410T-I/PT is an ideal core for secure USB-connected IoT nodes because it integrates a hardware cryptographic engine (AES, DES, 3DES, SHA-1, MD5) alongside a Full-Speed USB 2.0 OTG transceiver with on-chip PHY. The 32 MHz PIC24F core delivers 16 MIPS which is sufficient to maintain a USB device stack while offloading cryptographic primitives to dedicated hardware, eliminating the need for an external crypto IC and reducing BOM cost. XLP technology places deep-sleep current below 20 nA, so a USB-attached sensor can wake on USB VBUS or an interrupt, transmit encrypted data, and return to nanoWatt standby within microseconds. Designers can implement composite USB device classes (CDC + HID + vendor-specific) within the 64KB dual-partition Flash, enabling live firmware update with rollback safety. Example reference design: Microchip AN1166 (USB CDC) plus AN1231 (AES acceleration).
추천
Battery-Powered Industrial Sensor with LCD Display
The PIC24FJ64GB410T-I/PT is well-matched to battery-powered industrial sensors with built-in segmented LCD readouts because its on-chip segmented LCD controller drives up to 480 segments (60 pins x 8 commons) without requiring an external charge-pump driver. Combined with XLP technology that places nanoWatt sleep current below 20 nA typical and a wake-up latency under 1 ms from the 32 kHz secondary oscillator, a sensor can run for years on 2x AA cells while displaying measurement values locally. The 12-bit ADC with DMA support, 100-pin TQFP package allowing generous analog pin assignments, and 2.0-3.6 V VDD range covering unregulated battery rails all contribute to a compact analog-front-end design. Compared to discrete LCD driver + microcontroller solutions, the GB410T reduces board area by 40% and eliminates inter-IC noise coupling. Reference design: Microchip AN1267 (LCD fundamentals).
추천
Encrypted Data Loggers
Encrypted data loggers for regulatory or HIPAA applications benefit from the PIC24FJ64GB410T-I/PT's hardware crypto engine which accelerates AES-128/AES-256 in hardware, offloading the security stack from the CPU and freeing the 16 MIPS core to handle sampling, filtering, and SD card management. The dual-partition 64KB Flash allows secure firmware update with rollback, while the 8KB SRAM buffers multi-channel sensor data before encryption and storage. USB OTG enables direct mass-storage class export to a host PC without an external bridge IC. Power consumption during active logging is well under 10 mA at 3.3 V, making the part viable for portable loggers running from small Li-Ion packs. The PIC24FJ64GB410 family is recommended over 32-bit ARM Cortex-M alternatives when cost and BOM simplicity matter more than peak CPU throughput.
추천
Secure Point-of-Sale Terminals
Secure point-of-sale terminals benefit from the PIC24FJ64GB410T-I/PT's PCI-DSS-friendly hardware crypto accelerator, USB OTG for PIN-pad or NFC reader attachment, and segmented LCD driver for the customer-facing display. AES hardware acceleration performs transactional encryption at rates exceeding 200 KB/s at 32 MHz, easily meeting EMV and PCI performance requirements. The dual-partition Flash architecture allows PCI firmware to be patched in the field while maintaining a signed golden image. Compared to a host-PC-based POS, an embedded GB410T-based terminal lowers total cost of ownership by eliminating moving parts and the OS attack surface. The TQFP-100 package supports thermal management in enclosed POS housings, and the 2.0-3.6 V VDD range accommodates unregulated 3.6 V Li-Ion supplies.
추천
Portable Medical Devices
Portable medical devices such as glucose meters, pulse oximeters, and ambulatory monitors benefit from the PIC24FJ64GB410T-I/PT's low-power XLP modes (sub-1 uA in sleep), integrated 12-bit ADC for sensor digitization, USB OTG for data sync to a host PC or smartphone, and segmented LCD driver for the patient-facing display. The hardware crypto engine secures patient data at rest and during transfer, meeting HIPAA transmission requirements without a separate secure element. The 32 MHz performance is sufficient for running application code, USB CDC class drivers, and AES encryption simultaneously. The 100-pin TQFP package supports analog pin assignments for multiple sensor channels while leaving digital I/O for pushbuttons, beeper drivers, and external SPI peripherals. Operating temperature range of -40C to +85C supports both clinical and home-health environments.
추천
Human-Machine Interface (HMI) Panels
The PIC24FJ64GB410T-I/PT is well-suited for low-cost human-machine interface panels because its segmented LCD controller drives up to 480 segments (larger displays), USB OTG provides field-update connectivity to a host PC, and the 16 MIPS performance is sufficient for menu navigation, debouncing, and rotary-encoder processing. Compared to mid-range ARM Cortex-M0 designs that require an external LCD driver, the GB410T delivers a single-chip HMI solution in 100-pin TQFP. The dual-partition 64KB Flash allows field-upgradeable menu trees and localization tables, while the crypto engine protects vendor proprietary UI assets from unauthorized copying. For panels that do not need crypto, the PIC24FJ64GA410-I/PT offers a cost-down alternative in the same package.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24FJ64GB410T-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24FJ128GB410-I/PT | PIC24FJ256GB410-I/PT | PIC24FJ64GB410-I/PT | PIC24FJ64GB410T-I/PTG | PIC24FJ512GU406T-I/PT |
|---|---|---|---|---|---|---|
| Package | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash | 64 KB | 128 KB | 256 KB | 64 KB | 64 KB | 512 KB |
| RAM | 8 KB | 8 KB | 16 KB | 8 KB | 8 KB | 32 KB |
| CPU Speed | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) |
| Hardware Crypto | Yes (AES/DES/SHA-1/MD5) | Yes | Yes | Yes | Yes | No |
| Segmented LCD | Yes (up to 480 segs) | Yes | Yes | Yes | Yes | No |
| USB OTG | Yes (FS w/ PHY) | Yes | Yes | Yes | Yes | Yes |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| Approx. Price (qty 100) | USD 5.18 | USD 5.85 | USD 7.20 | USD 5.18 | USD 5.18 | USD 7.50 |
주요 차별점
- Integrated hardware crypto engine plus segmented LCD in same TQFP-100 (vs PIC24FJ64GA410-I/PT)
- Cost-optimized 64KB Flash variant in PIC24F GB4 family (vs PIC24FJ128GB410-I/PT)
- USB OTG with on-chip PHY in TQFP-100 (vs STM32L052C8T6)
설계 노트
Decouple each VDD/VSS pair with a 100 nF ceramic capacitor placed within 4 mm of the pins; add a single 4.7 uF bulk capacitor near the main VDD pin (pin 13). For battery operation, the on-chip 1.8V regulator requires a 10 uF capacitor on VCAP (pin 37). Estimated: with USB disabled and deep-sleep mode entered, average current at 3.3V is approximately 20 nA - sufficient for 5+ year operation on 2x AA cells.
The USB D+ (pin 33) and D- (pin 34) lines must be routed as a 90 ohm differential pair with trace length matching to within 2 mm. Place VBUS sense (pin 35) trace away from switching nodes and add a 100 nF cap to ground on VUSB3V3 (pin 36). The 32 kHz crystal traces (SOSCI/SOSCO) should be short and surrounded by a ground pour to minimize noise coupling into the low-power oscillator.
When using the segmented LCD controller, ensure the LCD bias network (typically 4.7 uF + 1 nF per common line) is placed within 8 mm of the COM pins. Avoid routing digital signals directly beneath the LCD segment traces to reduce crosstalk. The hardware crypto engine operates independently of the CPU core - ensure firmware uses the dedicated SFRs (CRYCON, CRYDAT) and not bit-banged I/O to maximize throughput.
Do not leave MCLR (pin 100) floating - always tie through a 10 kohm pull-up to VDD. The dual-partition Flash requires the FSEC and FBSLIM configuration bits to be set before live firmware updates will work; Microchip application note AN1157 covers the boot loader reference implementation. Avoid driving the LCD segment pins as outputs in firmware - the segment pins share GPIO mapping and conflict will permanently damage the display driver.
규정 준수 정보
RoHS and REACH compliant per Microchip product page; industrial temperature grade only (-40C to +85C); AEC-Q100 not qualified. For automotive applications use the PIC24FJ...GB410-E variant which supports extended temperature ranges.
