PIC24FJ64GA406-I/PT - 32MHz 64KB Flash Microcontroller | Microchip
부품 번호: PIC24FJ64GA406-I/PT ✓ 활성PIC24FJ64GA406-I/PT 개요
A PIC24F microcontroller is a 16-bit embedded controller positioned between simple 8-bit devices and more complex 32-bit processors. It combines program Flash, data RAM, timers, communication peripherals, analog conversion functions, and interrupt-driven control in one integrated circuit. The PIC24FJ64GA406 belongs to Microchip's XLP family, where XLP denotes technology focused on reducing current consumption during active, idle, sleep, and other low-power operating states.
Three headline characteristics define this device: 32 MHz maximum clock speed, 64 KB of Flash memory, and a 64-lead TQFP package. The program memory supports 22K by 24-bit instruction words as identified by Microchip's product-page description. Additional resources include 8 KB of SRAM, a hardware cryptographic module, segmented LCD capability, dual-partition Flash organization, and a broad collection of digital and analog peripherals. The industrial-temperature suffix indicates operation from -40°C to +85°C.
The 16-bit architecture provides more arithmetic and addressing capability than a typical 8-bit control MCU while retaining the resource efficiency expected from an embedded XLP design. Its operating speed supports responsive control loops, communication services, and user-interface handling. Hardware cryptography adds a dedicated security function for systems that require authenticated or encrypted data handling, reducing the amount of software-intensive cryptographic processing required at the application level. Dual-partition Flash is particularly useful where controlled firmware updates and recovery behavior are required.
Typical uses include industrial control panels, battery-powered instruments, segmented-LCD human-interface devices, secure access terminals, metering equipment, and compact embedded controllers. The 64-lead package provides substantially more I/O options than smaller packages, allowing simultaneous LCD operation, communications, sensor acquisition, and actuator control. The combination of XLP low-power features and integrated security also suits portable equipment that spends significant time between user interactions or sensor-sampling events.
When laying out a design, treat every LCD, communications, and general-purpose I/O assignment as a constrained multiplexing decision. Confirm the exact 64-pin electrical connections in the manufacturer pin-description table, provide clean references and decoupling at the supply pins, and validate startup and sleep behavior at the system level. Firmware should also enable clock, peripheral, and power-management features in an order that avoids invalid pin states during reset or upgrade operations.
This product record combines the manufacturer's core specifications with practical application guidance, package information, and same-family replacement context. It supports engineers who need a low-power 16-bit controller with hardware cryptography, 64 KB of Flash, segmented-LCD support, and a 64-lead TQFP footprint without relying on generic MCU selection advice.
드롭인 대체품: PIC24FJ64GA406-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24FJ64GA406-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Core Architecture, Low-Power Technology, Maximum CPU Speed.
PIC24FJ64GA404-I/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC24FJ64GA402-I/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC24FJ64GA410-I/PT
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →PIC24FJ64GA412-I/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC24FJ64GA414-I/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC24FJ64GA406-I/PT 최대 정격 & 전기적 특성
| Product Type | 16-bit XLP flash microcontroller |
| Maximum Operating Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 64 KB Flash (22K x 24-bit words) |
| Program Memory Organization | Dual-partition Flash |
| Data Memory | 8 KB RAM |
| Architecture | 16-bit PIC24F |
| Operating Voltage | 2.0 V to 3.5 V |
| 동작 온도 | -40°C to +85°C |
| 패키지 | 64-lead TQFP, 10 mm x 10 mm |
| 실장 유형 | Surface mount |
| Low-Power Technology | Microchip XLP |
| Security Feature | Integrated cryptographic module |
| Display Support | Segmented LCD support |
| RoHS 상태 | Compliant |
| Maximum Input Frequency | 32 MHz |
| Total Pin Count | 64 pins |
| Qualification Level | Industrial temperature grade |
PIC24FJ64GA406-I/PT 64-lead tqfp, 10 mm x 10 mm 핀 구성 가이드
PIC24FJ64GA406-I/PT(64-lead tqfp, 10 mm x 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC24FJ64GA406-I/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC24FJ64GA406-I/PT 적합 용도: 6 애플리케이션s: Segmented-LCD Industrial Control Panel, Secure Access and Authentication Terminal, Battery-Powered Metering Instrument, Connected Sensor and IoT Controller, Low-Power Data Acquisition Module, Programmable Logic Controller.
Segmented-LCD Industrial Control Panel
The PIC24FJ64GA406-I/PT fits a segmented-LCD control panel because it combines a 16-bit CPU, 64 KB of dual-partition Flash, 8 KB of RAM, and dedicated display-capable I/O in a 64-lead TQFP. The 32 MHz clock provides headroom for debouncing, menu-state processing, sensor filtering, and communications without requiring a separate display controller. Dual-partition Flash can support controlled firmware updates and recovery, while the segmented-LCD interface reduces the component count of a keypad-and-display product. The main design consideration is pin multiplexing: verify every LCD segment, key scan, and communication signal against the 64-pin table before finalizing the PCB.
추천
Secure Access and Authentication Terminal
The PIC24FJ64GA406-I/PT is well suited to an access-control terminal because its integrated cryptographic module adds hardware-assisted security without requiring a separate cryptography processor. The 16-bit architecture and 32 MHz operating frequency can support credential processing, display updates, keypad handling, event logging, and network-message processing concurrently. Its 64 KB of Flash provides useful space for protocol stacks, secure firmware, and dual-partition update logic, while XLP operation can reduce consumption when the terminal waits for user activity. Engineers should treat the cryptographic module as a distinct product feature and review key storage, clocking, and peripheral security requirements in the manufacturer documentation.
추천
Battery-Powered Metering Instrument
For a battery-powered metering instrument, the PIC24FJ64GA406-I/PT combines XLP low-power operation with enough processing capability for sensor acquisition, calibration, display presentation, and data logging. Its 32 MHz maximum frequency allows software to perform filtering and protocol handling efficiently during active measurement intervals, while low-power modes can reduce consumption between samples. The 8 KB of RAM supports transient data buffers, and 64 KB of Flash accommodates measurement algorithms, calibration tables, and two firmware images. A successful low-power design must align the MCU wake source, LCD duty cycle, sensor supply state, and communications activity rather than relying on sleep mode alone.
추천
Connected Sensor and IoT Controller
The PIC24FJ64GA406-I/PT can act as the central controller in a compact IoT sensor node that must process multiple inputs while keeping energy use low. Its 16-bit instruction set and 32 MHz clock support protocol handling, sensor fusion, threshold logic, and local status reporting, and the 64-lead TQFP provides ample pins for sensors, actuators, serial links, and indicators. Dual-partition Flash is useful for staged remote updates, while hardware cryptography can protect authentication or command traffic. The design should assign communications pins with attention to peripheral multiplexing, use pull-up or pull-down resistors where required, and validate the radio or sensor's sleep timing against the MCU's active and idle modes.
추천
Low-Power Data Acquisition Module
The PIC24FJ64GA406-I/PT is appropriate for a low-power data-acquisition module because it provides 32 MHz processing, 64 KB of program memory, and 8 KB of SRAM while supporting XLP power management. Engineers can use the processing capacity for sampling control, digital filtering, calibration, and packet preparation instead of offloading routine work to a higher-power processor. The segmented-LCD capability can support a local operator display without a separate display controller. For accurate measurements, analog and digital resources must be assigned according to the exact 64-pin configuration, and firmware should disable unused peripherals and return the device to a defined low-power state after each acquisition cycle.
추천
Programmable Logic Controller
The PIC24FJ64GA406-I/PT can serve as the control processor in a compact programmable logic controller for building controls, industrial monitoring, or equipment interfaces. Its 16-bit architecture and 32 MHz maximum frequency provide responsive digital I/O handling, timing, event logging, and serial communications, while the 64-lead TQFP exposes more I/O than small-outline alternatives. The 64 KB dual-partition Flash is advantageous for maintaining operating firmware and a protected recovery image. A robust design should isolate noisy power and signal paths, define safe reset states for every output, and use the exact manufacturer peripheral mapping to avoid conflicts between communications, timers, and general-purpose I/O.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24FJ64GA406-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24FJ64GA404-I/PT | PIC24FJ64GA402-I/PT | PIC24FJ64GA410-I/PT | PIC24FJ64GA412-I/PT | PIC24FJ64GA414-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-lead TQFP, 10 mm x 10 mm | 64-lead TQFP | 64-lead TQFP | 64-lead TQFP | 64-lead TQFP | 64-lead TQFP |
| CPU Architecture | 16-bit PIC24F | 16-bit PIC24F | 16-bit PIC24F | 16-bit PIC24F | 16-bit PIC24F | 16-bit PIC24F |
| Maximum Operating Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Low-Power Technology | XLP | XLP | XLP | XLP | XLP | XLP |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
주요 차별점
- Integrated cryptographic hardware (vs PIC24FJ64GA402-I/PT)
- Same-footprint 32 MHz and 64 KB Flash resource levels (vs PIC24FJ64GA410-I/PT)
- Dual-partition Flash for controlled firmware management (vs PIC24FJ64GA414-I/PT)
- 64-lead TQFP integration (vs PIC24FJ64GA406-I/MR)
설계 노트
Confirm the complete power-supply plan against the 2.0 V to 3.5 V family operating range before assigning external peripherals. Place decoupling capacitance at each supply connection shown in the manufacturer pin table, keep the return path short, and avoid routing high-current LCD or actuator loads through narrow supply traces. Because XLP performance depends on valid clock and peripheral states, measure both active current and the selected sleep-mode current on the finished board rather than relying only on nominal MCU figures.
Reserve all 64 package positions in the PCB footprint even if the initial design uses a subset of functions. Assign LCD segments, serial interfaces, timers, and general-purpose I/O from the exact PIC24FJ64GA406 pin-description table, and mark alternate functions explicitly in schematic review. This prevents a late peripheral reassignment from forcing a board respin. Pay particular attention to programming, reset, and clock pins because their required external networks constrain where adjacent signal-routing components can be placed.
Do not treat dual-partition Flash as automatic protection against a failed update. Implement a bootloader or application policy that validates the image, confirms the inactive partition, and leaves a recoverable path if programming is interrupted. Keep cryptographic keys and sensitive operations separate from ordinary application code, and confirm that any selected GA-series substitute provides the exact cryptographic and LCD functions used by the firmware.
Keep communication routing away from LCD drive paths, switching nodes, and high-current outputs. When the 32 MHz system clock drives a high-speed serial interface, route the source and destination according to the timing requirements of the selected peripheral and provide the specified termination. Grounding and decoupling should be evaluated together because a low-power controller can still produce unreliable measurements or communications when return-current paths share noisy supply traces.
규정 준수 정보
The component listing identifies the exact MPN as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified.