PIC24HJ32GP302-I/MM - 40 MIPS 16-Bit MCU | Microchip
부품 번호: PIC24HJ32GP302-I/MM ✓ 활성PIC24HJ32GP302-I/MM 개요
A PIC24H microcontroller belongs to the 16-bit embedded microcontroller family within the broader microcontroller and embedded-processing hierarchy. Its Harvard-style architecture, high instruction throughput and integrated analog and timing resources make it suitable for motor control, industrial monitoring, instrumentation and real-time signal-processing designs. Microchip identifies the PIC24H family as pin compatible with selected dsPIC33F devices, giving designers a path to reuse familiar board-level arrangements.
The device provides 32 KB of Flash memory, 21 I/O ports and 40 MIPS execution speed. Its analog feature set includes advanced analog peripherals, while three 16-bit timer/counter modules can be paired to form a 32-bit timer. Two output-capture channels and dedicated comparison functions support precise event timing, waveform measurement and feedback-control loops. The 3.0 V to 3.6 V operating-supply range makes the controller appropriate for regulated 3.3 V embedded systems.
The 28-lead QFN-S package supports compact PCB layouts but requires careful thermal-pad and solder-joint design. Because the package has a bottom thermal pad and fine-pitch leads, assembly process controls, pad geometry, stencil apertures and reflow profiles materially affect yield and thermal performance. For industrial designs, the -I grade designation identifies the industrial-temperature ordering option for the exact device.
Typical uses include digital motor-control loops, power-factor-correction and inverter control, industrial sensor acquisition, communications equipment, audio and control subsystems, and compact factory-automation nodes. The combination of 40 MIPS throughput, three 16-bit timers and advanced analog peripherals allows one device to execute control calculations while monitoring analog signals and timing external events.
Designers should allocate decoupling close to the power pins, connect the exposed pad according to the package land pattern, and verify every peripheral assignment against the complete device pin-description table. This page combines manufacturer specifications, practical integration guidance, package details and engineering-oriented comparisons to support component selection and PCB planning.
드롭인 대체품: PIC24HJ32GP302-I/MM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24HJ32GP302-I/MM (동일 폼 팩터 및 풋프린트) — 차이점: Package, Program Memory, Core Architecture, Operating Temperature, Timers.
PIC24HJ32GP302-H/MM
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC24HJ32GP302-E/MM
✅ 드롭인가격 문의
데이터시트 보기 →PIC24HJ32GP302T-I/MM
✅ 드롭인가격 문의
데이터시트 보기 →PIC24HJ32GP202-I/MM
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →PIC24HJ32GP202-H/MM
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC24HJ32GP202-E/MM
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →PIC24HJ32GP302-I/MM 최대 정격 & 전기적 특성
| Product Type | 16-bit Flash microcontroller |
| Product Family | PIC24H |
| Maximum Instruction Throughput | 40 MIPS |
| Program Memory | 32 KB Flash (11K x 24 words) |
| I/O Port Count | 21 ports |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Timer/Counter Count | 3 x 16-bit timer/counter |
| Combined Timer Configuration | Up to 32-bit operation by pairing two 16-bit timers |
| Output Capture Channels | 2 |
| Architecture | PIC24H 16-bit architecture |
| 패키지 | 28-lead QFN-S (6 x 6 mm) |
| 실장 유형 | Surface mount |
| Temperature Grade | Industrial grade |
| 수명 주기 상태 | Active |
PIC24HJ32GP302-I/MM 28-lead qfn-s (6 x 6 mm) 핀 구성 가이드
PIC24HJ32GP302-I/MM(28-lead qfn-s (6 x 6 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC24HJ32GP302-I/MM.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC24HJ32GP302-I/MM 적합 용도: 6 애플리케이션s: Industrial Motor Control, Power Conversion and Inverter Control, Industrial Sensor Acquisition, Factory Automation and Control Nodes, Precision Timing and Event Capture, Embedded Instrumentation.
Industrial Motor Control
The PIC24HJ32GP302-I/MM fits compact industrial motor-control nodes because its 40 MIPS throughput supports rapid control-loop calculations while three 16-bit timer/counter modules provide precise timing references. Two timer channels can be paired for 32-bit counting, and two output-capture channels support feedback capture from sensors or drive stages. The 3.0 V to 3.6 V operating range also aligns with regulated 3.3 V controller platforms. Designers should allocate the exposed pad for heat dissipation and verify that the selected timer, comparator and conversion resources satisfy the motor-control timing plan.
추천
Power Conversion and Inverter Control
The PIC24HJ32GP302-I/MM is suitable for digital power-conversion control because 40 MIPS execution provides computational headroom for current-loop and duty-cycle calculations. Its three 16-bit timers support independent PWM, timing and periodic-control functions, while the integrated analog resources can support feedback monitoring. The device operates from 3.0 V to 3.6 V, matching common 3.3 V gate-driver and digital-control environments. Before committing to the controller, verify startup sequencing, analog reference limits and the exact exposed-pad footprint on the production PCB.
추천
Industrial Sensor Acquisition
The PIC24HJ32GP302-I/MM can act as the supervisory controller in an industrial sensor-acquisition node, combining 21 I/O ports with advanced analog resources and 40 MIPS of control throughput. The 32 KB Flash capacity supports application firmware, while the timer and output-capture blocks improve measurement timing for repetitive sensor measurements. Its 3.3 V operating range simplifies integration with industrial transducers that use compatible signal-conditioning rails. Check the device-specific analog input limits and pin assignments in the manufacturer datasheet when designing multiplexed input channels.
추천
Factory Automation and Control Nodes
The PIC24HJ32GP302-I/MM suits compact factory-automation nodes that must combine real-time control, local I/O and analog monitoring in one package. Its 40 MIPS rate allows the MCU to execute communication handling and deterministic control tasks concurrently, while 21 I/O ports connect sensors, indicators and actuators. The industrial-grade suffix supports designs intended for extended commercial environments, subject to confirmation of the exact temperature limits. Keep sensitive analog traces away from switching nodes and route the package thermal pad as specified in the land pattern.
추천
Precision Timing and Event Capture
The PIC24HJ32GP302-I/MM is well suited to measurement systems requiring precise event capture and periodic timing. Two output-capture channels can measure pulse timing or external events, while three 16-bit timer/counter modules can provide independent periods, compare events and, when paired, 32-bit counting. The 40 MIPS instruction rate leaves processing capacity for filtering and communication beyond the timing functions. Validate timer clock sources, input thresholds and interrupt priorities in the device configuration, since package placement can affect sensitive timing traces.
추천
Embedded Instrumentation
The PIC24HJ32GP302-I/MM can serve as the control and measurement processor in compact embedded instrumentation. Its 32 KB Flash memory accommodates firmware, and 40 MIPS throughput supports signal conditioning calculations, calibration logic and user-interface updates. The advanced analog feature set and two output-capture channels broaden its use beyond simple digital acquisition. Because the QFN-S package is compact and thermally sensitive, provide continuous copper beneath the exposed pad and place input and decoupling capacitors according to the manufacturer layout guidance.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24HJ32GP302-I/MM — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24HJ32GP302-H/MM | PIC24HJ32GP302-E/MM | PIC24HJ32GP302T-I/MM | PIC24HJ32GP202-I/MM | PIC24HJ32GP202-H/MM |
|---|---|---|---|---|---|---|
| Package | 28-lead QFN-S (6 x 6 mm) | 28-lead QFN-S (6 x 6 mm) | 28-lead QFN-S (6 x 6 mm) | 28-lead QFN-S (6 x 6 mm) | 28-lead QFN-S (6 x 6 mm) | 28-lead QFN-S (6 x 6 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | PIC24H 16-bit | PIC24H 16-bit | PIC24H 16-bit | PIC24H 16-bit | PIC24H 16-bit | PIC24H 16-bit |
| Maximum Instruction Throughput | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Flash Program Memory | 32 KB (11K x 24 words) | 32 KB | 32 KB | 32 KB (11K x 24 words) | 32 KB | 32 KB |
| Supply Voltage Range | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
주요 차별점
- Higher timing integration within the same package (vs PIC24HJ32GP202-I/MM)
- Exact core configuration with flexible shipment format (vs PIC24HJ32GP302T-I/MM)
- Temperature-grade flexibility for environmental requirements (vs PIC24HJ32GP302-H/MM)
- Compact integration of control and advanced analog resources (vs PIC24HJ32GP202-E/MM)
설계 노트
The 28-lead QFN-S package requires attention to the exposed thermal pad and copper spreading. Follow the Microchip Technology land pattern and connect the exposed pad to the appropriate ground or thermal structure specified in the package documentation. Keep the area beneath the device uninterrupted where possible, use multiple thermal vias only where recommended, and avoid placing heat-generating components directly beneath the MCU. Validate the final junction-temperature margin with the PCB's actual copper geometry.
Place all decoupling capacitors close to their corresponding power pins, with the shortest possible ground-return path and no unnecessary loop area. Route sensitive analog inputs away from PWM, motor-drive and communication outputs. Because the QFN-S leads are fine pitch and relatively short, assembly stencil apertures, solder-paste volume and reflow profile should be qualified for the selected board finish. Validate pin assignments using the complete manufacturer pin-description table rather than relying on an approximate 28-pin diagram.
Do not treat the -I, -H, -E and T suffixes as interchangeable without checking their meanings. Temperature-grade suffixes affect the permissible environmental range, while the T suffix changes shipment packaging. Also verify the exact SRAM allocation, peripheral availability and alternate-function mapping for the selected device. A board can use the same QFN-S outline while still requiring software, BOM or qualification changes when moving between ordering codes.
Use separate return paths for analog and digital ground connections where the reference design recommends a joined ground-plane strategy. Keep the MCU clock and high-speed communication traces short, avoid routing them beneath noisy power stages, and provide clean references around analog inputs. The three timer channels can create fast-switching nodes even when the MCU operates from a quiet 3.3 V rail, so separate the timing outputs physically from precision analog traces to reduce crosstalk.
규정 준수 정보
The manufacturer product page identifies the PIC24HJ32GP302 as active. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free and conflict-minerals declarations require confirmation from the relevant manufacturer compliance documentation.