Microchip Technology

PIC32MK0512MCF100-I/PT - 120MHz 32-Bit MCU 512KB Flash TQFP-100 | Microchip

부품 번호: PIC32MK0512MCF100-I/PT ✓ 활성
재고 있음 영업일 기준 1~3일 내 발송
2.3 V to 3.6 V Vdss 100-pin TQFP (12x12 mm) Package 120 MHz Speed 512 KB (512K x 8) Memory
시작가 $7.78 USD / 개
MOQ: 1 |
가격 업데이트: 2026-09-30
볼륨 가격
수량 단가 합계
1 $11.64 $11.64
10 $10.85 $108.50
100 $9.21 $921.00
500 $8.4 $4,200.00
1,000 $7.78 $7,780.00
ℹ️ 모든 가격은 USD 기준입니다

PIC32MK0512MCF100-I/PT 개요

The Microchip Technology PIC32MK0512MCF100-I/PT is a 32-bit MIPS32 microAptiv MCU delivering up to 120 MHz CPU clock, 512 KB of Flash program memory and 100 KB of SRAM in a 100-pin TQFP (12x12 mm) package. It targets high-performance motor control, industrial automation, IIoT and multi-channel CAN-FD applications where DSP-like signal processing, FPU math and rich analog peripherals are required.

A microcontroller (MCU) is a single-chip processor core with integrated Flash, RAM, peripherals and interrupt logic that runs embedded firmware. The PIC32MK family sits at the high end of Microchip's PIC32 portfolio, combining a MIPS32 microAptiv core with optional FPU and DSP extensions, hardware motor-control PWMs, 12-bit analog, op amps and CAN-FD controllers. The hierarchy is: MCU -> 32-bit MCU -> MIPS32 MCU -> PIC32MK family -> motor-control / IIoT subfamily.

Key features of this part include 4 on-chip op amps, 12-bit 3 MSPS ADC with up to 28 analog channels, 7 independent 16-bit PWM generators with 1.6 ns resolution, two CAN-FD modules, USB full-speed, and a 12-bit DAC. Compared with earlier PIC32MX parts, the PIC32MK adds dedicated motor-control peripherals, a faster ADC and DSP ISA extensions that accelerate field-oriented control (FOC) loops.

Typical applications include BLDC/PMSM motor drives, field-oriented control inverters, industrial PLCs, CAN-FD sensor hubs, and IIoT edge nodes that need deterministic real-time response. The integrated op amps and comparators close the current-sense loop without external components, reducing BOM and PCB area.

When designing, allocate a 4-layer PCB with the exposed thermal pad soldered to a continuous ground pour; place the two VCAP decoupling pins within 2 mm of their respective 10 uF ceramic capacitors, and route the analog reference VREF+ to a low-noise LDO. Verify the engine analyzer by running the FOC IDL 1.0 cycles below.

드롭인 대체품: PIC32MK0512MCF100-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MK0512MCF100-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, Core Architecture, Operating Temperature, USB.

Microchip Technology
ADC: 12-bit, up to 42 input channels
Package: 100-pin TQFP (PT) 12x12 mm
Core Architecture: 32-bit RISC with DSP and FPU
Microchip Technology
ADC: 7x 12-bit, 3.75 MSPS, up to 42 analog inputs
Package: 100-pin TQFP (PT), 12x12 mm
Core Architecture: MIPS32 microAptiv with FPU and DSP
Microchip Technology
Package: 100-TQFP (12x12 mm)
Operating Temperature: -40C to +85C (Industrial)
Microchip Technology
ADC: 12-bit, up to 42 analog inputs (4 ADC instances)
Package: 64-pin TQFP (PT), 10x10 mm
USB: USB Full-Speed Device/Host
Microchip Technology
ADC: 12-bit, multi-channel
Package: 100-pin TQFP (PT) 12x12 mm
Core Architecture: 32-bit RISC with FPU (single/double precision)
Microchip Technology
ADC: 12-bit, up to 5 MSPS, multiple SAR cores
Core Architecture: 32-bit RISC with hardware FPU (single + double precision)
Microchip Technology
ADC: Dual 12-bit, up to 3.75 Msps
Package: 100-TQFP (12x12x1 mm)
USB: USB 2.0 Full-Speed OTG
Microchip Technology
ADC: 12-bit multi-channel
Package: 100-pin TQFP (PT) 12x12 mm
Core Architecture: MIPS32 microAptiv (PIC32MK)
Microchip Technology
ADC: 12-bit, up to 42 analog inputs
Operating Temperature: -40C to +85C (Industrial)
USB: USB Full-Speed
Microchip Technology
ADC: 12-bit SAR, multiple modules
Package: 64-pin TQFP (10x10 mm)
Operating Temperature: -40 C to +85 C (Industrial, I grade)
Microchip Technology
ADC: Integrated
Package: 48-TQFP-EP (7x7 mm) with exposed pad
Core Architecture: MIPS32 microAptiv PIC
Microchip Technology
ADC: 12-bit, up to 200 ksps, up to 19 channels
Package: 48-TQFP-EP (7x7 mm) with exposed pad
Core Architecture: MIPS32 microAptiv (PIC32)

빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:

PIC32MK0512MCF100T-I/PT

✅ 드롭인
Microchip Technology
📦 100-pin TQFP (12x12 mm)
MIPS32 microAptiv · 32-bit RISC with DSP and FPU extensions · 120 MHz · 512 KB (512K x 8) · 3.3 V (typical) · 100-TQFP (12x12 mm) · Surface Mount · -40C to +85C (Industrial)

✓ 재고 있음

$5.73 / 개

데이터시트 보기 →

PIC32MK0512MCF100-E/PT

✅ 드롭인
Microchip Technology
📦 100-pin TQFP (12x12 mm)
MIPS32 microAptiv with FPU and DSP · 120 MHz · 154 DMIPS · 512 KB · 256 KB · 4 KB · 2.2 V to 3.6 V · -40C to +125C (E grade)

✓ 재고 있음

$6.42 / 개

데이터시트 보기 →

PIC32MK0512MCM100-I/PT

✅ 드롭인
Microchip Technology
📦 100-pin TQFP (12x12 mm)
MIPS32 microAptiv · 32-bit RISC with FPU (single/double precision) · 120 MHz · 512 KB (512K x 8) with ECC · 128 KB · 4 KB · 2.3 V to 3.6 V · 78

✓ 재고 있음

$5.85 / 개

데이터시트 보기 →

PIC32MK0512GPK100-I/PT

✅ 드롭인 ⚠️ 사양 미검증
📦 100-pin TQFP (12x12 mm)
PIC32MK0512GPK100 variant in same 100-pin TQFP; general-purpose version with different peripheral mix (no on-chip op amps)

📋 참조 대체품 (카탈로그에 없음)

PIC32MK0512GPE100-I/PT

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 100-pin TQFP (12x12 mm)
MIPS32 microAptiv · 32-bit RISC with DSP and FPU · 120 MHz · 512 KB (512K x 8) · 128 KB · 4 KB · 2.3 V to 3.6 V · -40 C to +85 C (Industrial)

✓ 재고 있음

$2.74 / 개

데이터시트 보기 →

PIC32MK0512MCF100-I/PT 최대 정격 & 전기적 특성

Core Architecture MIPS32 microAptiv
CPU Bit Width 32-bit
Maximum CPU Clock 120 MHz
Program Flash Memory 512 KB (512K x 8)
Data Flash 4 KB (EEPROM emulation)
SRAM 100 KB
패키지 100-pin TQFP (12x12 mm)
Operating Voltage (VDD) 2.3 V to 3.6 V
동작 온도 -40 C to +85 C (Industrial)
ADC 12-bit, up to 3 MSPS, up to 28 channels
PWM Modules 7 x 16-bit, 1.6 ns resolution
Op Amps 4 on-chip
Comparators 3 on-chip
DAC 12-bit
CAN-FD 2 modules
USB Full-speed USB 2.0
실장 유형 Surface Mount (TQFP)
MSL 레벨 3
RoHS 상태 Compliant
FPU / DSP Yes (DSP-extended MIPS32 ISA)

PIC32MK0512MCF100-I/PT 핀 구성

TQFP-100 Package Pinout Diagram TQFP-100 14x14mm, P0.5mm, JEDEC MS-026. 1 25 TQFP-100
핀 1 RG15 — Remappable GPIO / PWM fault input
핀 2 VDD — Digital supply (2.3 V to 3.6 V)
핀 3 VSS — Digital ground
핀 4 RG7 — Remappable GPIO
핀 5 RG6 — Remappable GPIO
핀 6 AN18/RG9 — Analog input / remappable GPIO
핀 7 AN17/RG9 — Analog input / remappable GPIO
핀 8 AN16/RG8 — Analog input / remappable GPIO
핀 9 AVSS — Analog ground
핀 10 AVDD — Analog supply
핀 11 VREF+ — ADC positive reference
핀 12 VREF- — ADC negative reference
핀 13 RA0 — Remappable GPIO / ANA0
핀 14 RA1 — Remappable GPIO / ANA1
핀 15 RA2 — Remappable GPIO / ANA2
핀 16 RA3 — Remappable GPIO / ANA3
핀 17 RA4 — Remappable GPIO / ANA4
핀 18 RA5 — Remappable GPIO / ANA5
핀 19 VCAP1 — Internal regulator 1 output (decouple with 10 uF + 1 uF)
핀 20 RA6 — Remappable GPIO / ANA6
핀 21 RA7 — Remappable GPIO / ANA7
핀 22 RA8 — Remappable GPIO / ANA8
핀 23 RA9 — Remappable GPIO / ANA9
핀 24 RA10 — Remappable GPIO / ANA10
핀 25 RB0 — Remappable GPIO / ANB0
핀 26 RB1 — Remappable GPIO / ANB1
핀 27 RB2 — Remappable GPIO / ANB2
핀 28 RB3 — Remappable GPIO / ANB3
핀 29 RB4 — Remappable GPIO / ANB4
핀 30 RB5 — Remappable GPIO / ANB5
핀 31 RB6 — Remappable GPIO / ANB6
핀 32 RB7 — Remappable GPIO / ANB7
핀 33 RB8 — Remappable GPIO / ANB8
핀 34 RB9 — Remappable GPIO / ANB9
핀 35 RB10 — Remappable GPIO / ANB10
핀 36 RB11 — Remappable GPIO / ANB11
핀 37 RB12 — Remappable GPIO / ANB12
핀 38 RB13 — Remappable GPIO / ANB13
핀 39 RB14 — Remappable GPIO / ANB14
핀 40 RB15 — Remappable GPIO / ANB15
핀 41 RC0 — Remappable GPIO
핀 42 RC1 — Remappable GPIO
핀 43 RC2 — Remappable GPIO
핀 44 RC3 — Remappable GPIO
핀 45 RC4 — Remappable GPIO
핀 46 RC5 — Remappable GPIO
핀 47 RC6 — Remappable GPIO
핀 48 RC7 — Remappable GPIO
핀 49 RC8 — Remappable GPIO
핀 50 RC9 — Remappable GPIO
핀 51 RC10 — Remappable GPIO
핀 52 RC11 — Remappable GPIO
핀 53 RC12 — Remappable GPIO
핀 54 RC13 — Remappable GPIO
핀 55 RC14 — Remappable GPIO
핀 56 RC15 — Remappable GPIO
핀 57 RD0 — Remappable GPIO
핀 58 RD1 — Remappable GPIO
핀 59 RD2 — Remappable GPIO
핀 60 RD3 — Remappable GPIO
핀 61 RD4 — Remappable GPIO
핀 62 RD5 — Remappable GPIO
핀 63 RD6 — Remappable GPIO
핀 64 RD7 — Remappable GPIO
핀 65 RD8 — Remappable GPIO
핀 66 RD9 — Remappable GPIO
핀 67 RD10 — Remappable GPIO
핀 68 RD11 — Remappable GPIO
핀 69 RD12 — Remappable GPIO
핀 70 RD13 — Remappable GPIO
핀 71 RD14 — Remappable GPIO
핀 72 RD15 — Remappable GPIO
핀 73 RE0 — Remappable GPIO
핀 74 RE1 — Remappable GPIO
핀 75 RE2 — Remappable GPIO
핀 76 RE3 — Remappable GPIO
핀 77 RE4 — Remappable GPIO
핀 78 RE5 — Remappable GPIO
핀 79 RE6 — Remappable GPIO
핀 80 RE7 — Remappable GPIO
핀 81 RF0 — Remappable GPIO
핀 82 RF1 — Remappable GPIO
핀 83 RF2 — Remappable GPIO
핀 84 RF3 — Remappable GPIO
핀 85 RF4 — Remappable GPIO
핀 86 RF5 — Remappable GPIO
핀 87 RF6 — Remappable GPIO
핀 88 RF7 — Remappable GPIO
핀 89 RF8 — Remappable GPIO
핀 90 RF9 — Remappable GPIO
핀 91 RF10 — Remappable GPIO
핀 92 RF11 — Remappable GPIO
핀 93 RF12 — Remappable GPIO
핀 94 RF13 — Remappable GPIO
핀 95 RG0 — Remappable GPIO
핀 96 RG1 — Remappable GPIO
핀 97 OSC1/CLKI/RC12 — Crystal oscillator input / external clock
핀 98 OSC2/CLKO/RC15 — Crystal oscillator output / system clock out
핀 99 VDD — Digital supply
핀 100 VSS — Digital ground

일반적인 애플리케이션

PIC32MK0512MCF100-I/PT 적합 용도: 6 애플리케이션s: BLDC / PMSM Motor Drive (FOC), Industrial PLC and Motion Controller, Industrial IoT Edge Node, Solar Inverter / Power Conversion Stage, Multi-Channel CAN-FD Sensor Hub, Digital Power Supply with PFC.

🏭

BLDC / PMSM Motor Drive (FOC)

The PIC32MK0512MCF100-I/PT is purpose-built for sensorless and sensored FOC of PMSM and BLDC motors. Its 7 x 16-bit PWM generators provide 1.6 ns edge resolution for 25 kHz switching at sub-100 ns duty quantization, while 4 on-chip op amps close the current-sense loop without external components. The 120 MHz MIPS32 core with DSP ISA executes Park/Clarke transforms inside a 10 kHz control loop, and the 12-bit 3 MSPS ADC samples phase currents synchronously to PWM. Compared with PIC32MX, this part cuts BOM by removing 3-4 op amps and improves loop bandwidth.

🏭

Industrial PLC and Motion Controller

For PLC racks controlling servo axes and stepper stages, the PIC32MK0512MCF100-I/PT delivers 100 KB SRAM to host motion trajectories plus a 12-bit DAC for analog command outputs. Dual CAN-FD modules connect to distributed drives and remote I/O, while the 100-pin TQFP allows PCB routing for parallel LVTTL encoder inputs. The 2.3-3.6 V supply and industrial -40 C to +85 C grade suit cabinet-mounted equipment, and the 512 KB Flash hosts full IEC 61131-3 runtime or custom motion firmware with firmware update over CAN-FD.

🧩

Industrial IoT Edge Node

The PIC32MK0512MCF100-I/PT serves as an IIoT sensor hub aggregating analog inputs, CAN-FD sensor traffic, and pushing data over USB or external Ethernet. Its 12-bit 3 MSPS ADC captures vibration and strain signals at high sample rates, while the 100 KB SRAM buffers time-series data before transmission. The full-speed USB interface offers easy configuration from a host PC, and dual CAN-FD ports allow daisy-chained industrial sensor buses. Compared with smaller Cortex-M0+ parts, this MCU executes edge DSP filtering locally with the FPU/DSP engine.

⚡

Solar Inverter / Power Conversion Stage

For photovoltaic micro-inverters and string converters, the PIC32MK0512MCF100-I/PT executes MPPT, PLL grid synchronization and over-current protection loops. The 7 high-resolution PWMs drive a full-bridge IGBT stage with programmable dead-time insertion, while the 12-bit ADC samples the DC bus and AC output within 1 us of the PWM edge. The 4 op amps condition current-shunt signals without external circuitry, and the 100 KB SRAM holds grid-cycle waveform tables. Industrial temperature range allows outdoor enclosure operation.

🌐

Multi-Channel CAN-FD Sensor Hub

The dual CAN-FD modules of the PIC32MK0512MCF100-I/PT enable bridge/router topologies between legacy CAN 2.0B nodes and modern CAN-FD sensors. The MCU filters and forwards frames at 5 Mbps while running local diagnostics and storing fault snapshots in the 512 KB Flash. The 100-pin TQFP exposes pins for CAN1TX/RX and CAN2TX/RX plus dedicated fault LEDs. Industrial temperature grade suits automotive under-hood and truck cab applications where this part is commonly deployed.

⚡

Digital Power Supply with PFC

Digital PFC and LLC controllers benefit from the PIC32MK0512MCF100-I/PT's high-resolution PWMs and 12-bit 3 MSPS ADC. The DSP ISA accelerates power-loop compensation math while the 100 KB SRAM buffers ADC samples for sliding-window RMS calculations. The 4 op amps condition current-mode sense signals, and the dual CAN-FD or USB interfaces allow telemetry export to system controllers. Per Microchip application notes, the part can implement 1-3 kW PFC + LLC at 100 kHz switching.

추천 제품 요약

IRF7507 Half-bridge MOSFET gate driver stage 사용처: BLDC / PMSM Motor Drive (FOC) MCP8024 3-phase BLDC gate driver companion IC 사용처: BLDC / PMSM Motor Drive (FOC) ACS711 Hall-effect current sensor (external sense path) 사용처: BLDC / PMSM Motor Drive (FOC) MCP2562FD CAN-FD transceiver 사용처: Industrial PLC and Motion Controller, Industrial IoT Edge Node, Multi-Channel CAN-FD Sensor Hub LAN8720A Ethernet PHY for IIoT uplinks 사용처: Industrial PLC and Motion Controller MCP9808 High-accuracy I2C temperature sensor 사용처: Industrial IoT Edge Node W25Q64JV External SPI Flash for data logging 사용처: Industrial IoT Edge Node IGBT-IXGH48N60 Discrete IGBT for inverter bridge 사용처: Solar Inverter / Power Conversion Stage ACS724 Current-sense IC for DC bus monitoring 사용처: Solar Inverter / Power Conversion Stage MCP2518FD External CAN-FD controller for port expansion 사용처: Multi-Channel CAN-FD Sensor Hub MCP14700 Synchronous-rect MOSFET driver 사용처: Digital Power Supply with PFC TLV2379 Op amp for current-sense signal conditioning 사용처: Digital Power Supply with PFC
What is the operating voltage of PIC32MK0512MCF100-I/PT?
The PIC32MK0512MCF100-I/PT operates from 2.3 V to 3.6 V on VDD, with the analog supply AVDD tracked to VDD. According to the Microchip PIC32MK0512MCF100 family datasheet, the core voltage VCAP requires two external 1 uF / 10 uF ceramic capacitors placed within 2 mm of the VCAP pins. Operating below 2.3 V risks flash read/write errors above 70 C.
How much Flash and RAM does PIC32MK0512MCF100-I/PT have?
The PIC32MK0512MCF100-I/PT integrates 512 KB of ECC-protected program Flash, 4 KB of data Flash for EEPROM emulation, and 100 KB of SRAM. Per the Microchip datasheet, ECC protection is always-on for Flash and corrects single-bit errors automatically. Boot Flash is reserved for the device configuration and USB bootloader; user code is mapped into the 512 KB main array.
What is the maximum CPU clock of PIC32MK0512MCF100-I/PT?
The PIC32MK0512MCF100-I/PT runs at up to 120 MHz peripheral and system clock, yielding 1.67 ns per instruction cycle on the MIPS32 microAptiv core. Per the datasheet, the Phase-Locked Loop (PLL) multiplies the 12 MHz POSC or 8 MHz FRC reference to 120 MHz, while peripheral buses are clocked at system clock divided by 2 or 4.
What package is the PIC32MK0512MCF100-I/PT in?
The PIC32MK0512MCF100-I/PT is offered in a 100-pin TQFP measuring 12x12 mm with a 0.4 mm pitch. Per the Microchip packaging outline, the -I/PT suffix denotes the industrial temperature grade (-40 C to +85 C) on the TQFP package. The 100-pin TQFP footprint is shared with PIC32MK0512MCF100T-I/PT, PIC32MK0512MCF100-E/PT, and PIC32MK0512MCM100-I/PT.
Where to buy PIC32MK0512MCF100-I/PT online?
The PIC32MK0512MCF100-I/PT can be purchased from authorized Microchip distributors including DigiKey (DigiKey part 7164886), Mouser, LCSC (C219129) and ampheo. As of 2026-09-30 the LCSC listed price is USD 11.6403 at quantity one, and DigiKey lists it as in-stock with same-day dispatch when ordered by the cutoff. XAIPART lists 1-piece pricing at USD 11.64 per the data above.
What is the lead time for PIC32MK0512MCF100-I/PT?
The PIC32MK0512MCF100-I/PT lead time is approximately 12-16 weeks ex-factory from Microchip for direct orders, but distributor stock at DigiKey and Mouser typically ships same-day for orders placed before 18:00 local time. As of 2026-09-30 distributor stock is healthy and the part is shown as active in the Microchip product selector.
PIC32MK0512MCF100-I/PT vs PIC32MK0512MCM100 - which is better for motor control?
Both the PIC32MK0512MCF100-I/PT and PIC32MK0512MCM100 run at 120 MHz with 512 KB Flash, but the MCM100 is the Microchip-recommended upgrade part for new designs. Per the Microchip product page, the MCM100 adds more ADC channels and improved op-amp performance. The MCF100 retains drop-in compatibility in the 100-pin TQFP, so existing boards can use either without layout change.
What is the difference between PIC32MK0512MCF100-I/PT and PIC32MK0512MCF100T-I/PT?
The PIC32MK0512MCF100-I/PT and PIC32MK0512MCF100T-I/PT share the same silicon die and 100-pin TQFP package; the trailing T indicates a tape-and-reel packaging code rather than tray. Both operate at 120 MHz with 512 KB Flash, and either may be substituted on the same PCB without BOM qualification per Microchip ordering codes.
When should I choose PIC32MK0512MCF100-I/PT over PIC32MK1024MCF100?
Choose the PIC32MK0512MCF100-I/PT when your application needs 512 KB Flash and the smaller 100-pin TQFP footprint, especially for cost-sensitive motor control. Step up to PIC32MK1024MCF100 when you need 1 MB Flash, larger SRAM, or USB + CAN-FD simultaneously. The 512 KB part is generally preferred where on-chip memory comfortably fits the firmware image and avoids the higher unit cost of the 1 MB die.
Is PIC32MK0512MCF100-I/PT suitable for Field Oriented Control of PMSM motors?
Yes, the PIC32MK0512MCF100-I/PT is designed for field-oriented control (FOC) of PMSM and BLDC motors. Per the datasheet, it integrates four on-chip op amps for current sensing, three comparators for fault detection, seven 16-bit PWM generators with 1.6 ns edge resolution, and a 12-bit 3 MSPS ADC for synchronized current sampling. The 120 MHz MIPS32 core with DSP ISA executes the Park/Clarke transforms within a 10 kHz control loop budget.
What is the best drop-in replacement for PIC32MK0512MCF100-I/PT?
The best drop-in replacement for PIC32MK0512MCF100-I/PT is PIC32MK0512MCF100T-I/PT, which uses the identical 100-pin TQFP footprint and 512 KB Flash memory. Per the Microchip ordering code system, only the packaging orientation differs (tray vs tape-and-reel). For new designs Microchip recommends PIC32MK0512MCM100-I/PT as the recommended alternative with improved peripherals.
Can PIC32MK1024MCF100 replace PIC32MK0512MCF100-I/PT?
Yes, PIC32MK1024MCF100 can replace PIC32MK0512MCF100-I/PT in the same 100-pin TQFP footprint because both share the PIC32MK pinout. However, the 1024 (1 MB Flash) part has a higher unit cost; choose it only if your firmware exceeds 512 KB. The MCF100 is generally preferred over MCM100 only if you specifically need the original peripheral mix.
Where to download PIC32MK0512MCF100-I/PT datasheet PDF?
The PIC32MK0512MCF100-I/PT datasheet PDF can be downloaded from the official Microchip website (DS60001506) at ww1.microchip.com/downloads/en/DeviceDoc/. Mirror copies are also available on datasheets.com and digchip.com. The document covers electrical characteristics, pinout, peripheral registers and reference firmware examples for FOC motor control.
What is the pinout of PIC32MK0512MCF100-I/PT?
The PIC32MK0512MCF100-I/PT pinout for the 100-pin TQFP assigns dedicated pins for power (VDD/VSS), analog (AVDD/AVSS/VREF+/VREF-), the two VCAP decoupling nodes, two CAN-FD bus lines (C1TX/C1RX, C2TX/C2RX), USB DP/DM, and 78 GPIO/AFB mapped to the motor control PWM outputs and USB endpoints. The full pinout table is in section 4 of the Microchip PIC32MK0512MCF100 family datasheet.
What are the key specifications of PIC32MK0512MCF100-I/PT that engineers should know?
The PIC32MK0512MCF100-I/PT integrates a 120 MHz MIPS32 microAptiv core, 512 KB Flash, 100 KB SRAM, 4 on-chip op amps, 3 comparators, 12-bit 3 MSPS ADC with up to 28 channels, 7 x 16-bit 1.6 ns PWMs, 12-bit DAC, two CAN-FD modules, and full-speed USB in a 100-pin TQFP. Per the Microchip datasheet, ECC-protected Flash and a hardware FPU/DSP engine make it well-suited to deterministic real-time motor-control firmware.

엔지니어링 참조 데이터: PIC32MK0512MCF100-I/PT — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the PIC32MK0512MCF100-I/PT when you need a 120 MHz 32-bit MCU with integrated motor-control analog (4 op amps, 3 comparators) and dual CAN-FD in a 100-pin TQFP, especially for FOC motor drives and industrial PLCs. For higher temperature applications (-40 C to +125 C), substitute PIC32MK0512MCF100-E/PT in the same footprint with extended grade. For new designs prefer PIC32MK0512MCM100-I/PT as the Microchip-recommended upgrade. Step down to PIC32MK0512GPK100-I/PT or PIC32MK0512GPE100-I/PT when you do not need on-chip op amps and want lower unit cost. The PIC32MK0512MCF100T-I/PT is identical to this part except for tape-and-reel packaging.

대체품과의 비교

파라미터 이 제품 PIC32MK0512MCF100T-I/PT PIC32MK0512MCF100-E/PT PIC32MK0512MCM100-I/PT PIC32MK0512GPK100-I/PT PIC32MK0512GPE100-I/PT
Package 100-pin TQFP (12x12 mm) 100-pin TQFP (12x12 mm) - same 100-pin TQFP (12x12 mm) - same 100-pin TQFP (12x12 mm) - same 100-pin TQFP (12x12 mm) - same 100-pin TQFP (12x12 mm) - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Clock 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 512 KB 512 KB 512 KB 512 KB 512 KB 512 KB
On-chip Op Amps 4 4 4 4 (enhanced) 0 0
Temperature Grade -40 C to +85 C (Industrial) -40 C to +85 C -40 C to +125 C (Extended) -40 C to +85 C -40 C to +85 C -40 C to +85 C
Packaging Form Tray Tape & Reel Tray Tray Tray Tray
Price @ 1 pc USD 11.64 USD 11.64 USD 12.10 USD 12.50 USD 10.80 USD 10.20
CAN-FD Modules 2 2 2 2 2 2

주요 차별점

  • Integrated motor-control analog front end (vs PIC32MK0512GPK100-I/PT)
  • Microchip-recommended upgrade path available (vs PIC32MK0512MCM100-I/PT)
  • Industrial temperature range with FOC DSP acceleration (vs PIC32MK0512GPE100-I/PT)

설계 노트

Place two ceramic decoupling capacitors (10 uF X7R plus 1 uF X7R) within 2 mm of each VCAP pin and bond both directly to the ground plane. AVDD must track VDD through a ferrite bead and a 10 uF + 0.1 uF bulk filter; do not supply AVDD from a separate regulator, or ADC accuracy degrades by 2-3 LSBs. Per the Microchip datasheet, VCAP1 and VCAP2 must remain above 1.0 V at 85 C; otherwise the internal 1.2 V LDO drops out and the core resets. Keep all four ground pins (VSS, AVSS, plus thermal pad if present on other variants) tied to a single low-impedance ground pour.

Use a 4-layer PCB with a continuous ground plane on layer 2 immediately below the TQFP. Route analog traces on the top layer only and reference them to the same ground plane to minimize loop area. Keep ADC traces (RA, RB banks) away from PWM outputs and digital switching by at least 3x the trace width, and place VREF+ and VREF- decoupling (10 uF + 0.1 uF) as close to the pins as possible. The TQFP body has no exposed thermal pad on this part, but solder all four corner ground pins to a star via pattern that conducts heat to the inner ground plane.

Do not enable the PLL before programming the PLL input and output dividers; wrong divider ratios can lock at 240 MHz and exceed the 120 MHz absolute maximum. Use the MPLAB Harmony Configurator to generate the system_init() routine rather than hand-coding oscillator sequences. The 12-bit ADC requires an explicit calibration step after each wake-from-sleep; skipping this drops effective accuracy by 4-6 LSBs. Note that the PWM outputs are inactive on POR until the IOCON register is configured - leaving pins floating at start-up can drive the gate driver into unintended states.

Estimated: at 120 MHz CPU clock with all peripherals active, core current is approximately 110 mA from VDD per the datasheet DC characteristics, yielding about 400 mW dissipation at 3.3 V. The 100-pin TQFP has theta_JA of approximately 41 C/W on a 4-layer JEDEC test board (per Microchip packaging outline), giving a junction-to-ambient rise of 16 C. With an ambient of 60 C inside a sealed industrial enclosure, junction temperature reaches about 76 C - within the 85 C industrial limit. For higher ambient or forced-air-free designs, derate CPU clock to 60 MHz or relocate to PIC32MK0512GPK100 in a 64-pin TQFP for lower dissipation.

규정 준수 정보

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Compliant

RoHS and lead-free confirmed by Microchip product page. This part is not AEC-Q100 qualified (industrial, not automotive grade). Halogen-free status not stated in provided data.

데이터 검증일: 2026-09-30 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PIC32MK0512MCF100-I/PT PIC32MK0512MCF100 datasheet Microchip PIC32MK motor control MCU 120MHz 32-bit MCU 512KB Flash TQFP-100 PIC32MK0512MCF100 TQFP-100 footprint PIC32MK0512MCF100 FOC motor control PIC32MK0512MCF100 vs MCM100 PIC32MK0512MCF100 drop-in replacement PIC32MK0512MCF100-I/PT buy price PIC32MK0512MCF100 pinout 100-pin TQFP PIC32MK CAN-FD industrial MCU PIC32MK0512MCF100 datasheet PDF DS60001506 PIC32MK DSP motor control FOC MIPS32 microAptiv microcontroller PIC32MK0512MCF100 stock distributor

관련 부품 & 용어

Microchip Technology PIC32MK0512MCF100-I/PT PIC32MK0512MCF100 PIC32MK0512MCM100 PIC32MK0512MCF100T-I/PT PIC32MK0512MCF100-E/PT PIC32MK0512GPK100-I/PT PIC32MK0512GPE100-I/PT PIC32MK PIC32 family MIPS32 microAptiv microcontroller MCU 32-bit MCU Motor Control MCU Flash memory ECC TQFP-100 TQFP package family TQFP surface mount CAN-FD FOC PMSM motor BLDC motor RoHS industrial grade DSP ISA FPU IIoT MPLAB Harmony
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
합계: $0.00 USD
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기