PIC32MK1024GPK064T-I/PT - 120MHz 32-bit MCU, 1MB Flash, TQFP-64
부품 번호: PIC32MK1024GPK064T-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $9.85 | $9.85 |
| 10 | $8.92 | $89.20 |
| 100 | $7.65 | $765.00 |
| 500 | $6.8 | $3,400.00 |
| 1,000 | $6.1 | $6,100.00 |
| 3,000 | $5.45 | $16,350.00 |
PIC32MK1024GPK064T-I/PT 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and peripheral interfaces (ADC, timers, communication ports, GPIO). The PIC32MK family belongs to the 32-bit microcontroller hierarchy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32MK family. PIC32MK devices bridge the gap between 8/16-bit PIC MCUs and higher-end Cortex-M parts, offering deterministic interrupt response, single-cycle MAC DSP instructions, and DSP-oriented peripheral connectivity.
Key features of the PIC32MK1024GPK064T-I/PT include a 120 MHz MIPS32 microAptiv core with single-cycle MAC, four 12-bit ADC modules providing up to 42 analog inputs at 3.75 MSPS, six UART, four SPI, four I2C, two CAN 2.0B, two USB Full-Speed (Host/Device/OTG), and a 16-bit Parallel Master Port (PMP). It also integrates a crypto engine, RTCC, four 16-bit/32-bit capture/compare timers, and a 32-bit deadman timer for safety-critical control loops. ECC on Flash and RAM improves reliability in electrically noisy industrial environments.
Architecturally, the PIC32MK uses a 5-stage pipeline microAptiv core with DSP ASE support, enabling single-cycle 32x32 MAC operations. The device operates from 2.3V to 3.6V and supports industrial temperature range (-40C to +85C). The 64-pin TQFP package offers generous GPIO (up to 53) plus analog and dedicated peripheral pins, suitable for through-hole or socketed designs.
Typical applications include 3-phase motor control (BLDC, PMSM, FOC), industrial PLC modules, multi-channel data acquisition systems, USB-connected industrial sensors, IIoT edge nodes, and power-conversion digital controllers. The dual USB and dual CAN make it well suited to networked industrial equipment. The two CAN ports allow bridging of independent industrial buses without an external transceiver controller.
A key design consideration is proper decoupling: place 100 nF ceramic capacitors near each VDD/VSS pair and a bulk 4.7-10 uF tantalum or ceramic capacitor on the main supply rail. Designers should also enable the JTAG boundary scan in development and use the built-in crypto engine for secure firmware authentication. The PIC32MK1024GPK064T-I/PT supports MPLAB Harmony v3 and the MPLAB XC32 compiler for software development.
This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: PIC32MK1024GPK064T-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MK1024GPK064T-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Operating Temperature, USB, Package, Core Architecture.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MK1024GPK064-I/PT
✅ 드롭인✓ 재고 있음
$4.89 / 개
데이터시트 보기 →PIC32MK1024GPK064-E/PT
✅ 드롭인✓ 재고 있음
$5.41 / 개
데이터시트 보기 →PIC32MK1024GPK064T-I/PT 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 microAptiv |
| Family | PIC32MK GP |
| CPU Core | 32-bit RISC |
| Operating Frequency | 120 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) with ECC |
| 공급 전압 | 2.3 V to 3.6 V |
| 동작 온도 | -40 C to +85 C (Industrial, I-grade) |
| 패키지 | 64-pin TQFP (PT), 10x10 mm |
| ADC | 12-bit, 3.75 MSPS, up to 42 channels (4 modules) |
| USB | 2x USB 2.0 Full-Speed (Host/Device/OTG) |
| CAN | 2x CAN 2.0B (NO CAN-FD on this variant) |
| UART | 6 |
| SPI | 4 |
| I2C | 4 |
| Parallel Master Port (PMP) | 16-bit |
| Timers | 16/32-bit CCP, 32-bit Deadman Timer |
| 실장 유형 | Surface Mount (gull-wing TQFP) |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
| Tape and Reel Suffix | T (Tape & Reel packing) |
PIC32MK1024GPK064T-I/PT 64-pin tqfp (pt), 10x10 mm 핀 구성 가이드
PIC32MK1024GPK064T-I/PT(64-pin tqfp (pt), 10x10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC32MK1024GPK064T-I/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC32MK1024GPK064T-I/PT 적합 용도: 6 애플리케이션s: 3-Phase Motor Control (BLDC/PMSM), Industrial PLC and IO Modules, Multi-Channel Data Acquisition System, USB Industrial Sensor Hub, IIoT Edge Node with CAN Bridge, Digital Power Conversion Controller.
3-Phase Motor Control (BLDC/PMSM)
The PIC32MK1024GPK064T-I/PT is well suited for 3-phase BLDC and PMSM motor control with field-oriented control (FOC). Its 120 MHz MIPS32 microAptiv core executes single-cycle MAC operations, enabling deterministic FOC loops at 20 kHz PWM switching with sub-microsecond computation. The four 12-bit ADCs at 3.75 MSPS provide simultaneous sampling of three phase currents plus DC-bus voltage with hardware-triggered conversion synchronized to PWM edges. The six PWM pairs with complementary outputs, dead-band generators, and 32-bit deadman timer support safe commutation. Use it with MCP8026 BLDC gate driver or external MOSFET bridge. Pin-compatible alternatives like PIC32MK1024GPK064-I/PT allow easy BOM simplification.
추천
Industrial PLC and IO Modules
The PIC32MK1024GPK064T-I/PT integrates dual CAN 2.0B and dual USB FS plus 6 UART/4 SPI/4 I2C, making it ideal for industrial PLC remote IO modules and protocol-bridging gateways. Its 42-channel 12-bit ADC at 3.75 MSPS handles multi-channel analog sensor acquisition (temperature, pressure, flow) within a single MCU, eliminating external ADC ASICs. ECC-protected 1 MB Flash supports IEC 61131-3 runtime plus user logic with field-upgrade capability. The crypto engine enables secure boot and authenticated firmware updates for IIoT edge nodes. Pin-compatible /E temperature variant supports up to +125C junction for uncooled cabinet mounting.
추천
Multi-Channel Data Acquisition System
The PIC32MK1024GPK064T-I/PT's four independent 12-bit ADC modules at 3.75 MSPS support up to 42 simultaneous sampling channels, making it ideal for multi-channel DAQ front-ends in process control and vibration monitoring. With 1 MB ECC Flash, raw samples can be buffered and processed with on-chip DSP instructions (single-cycle MAC) for FFT and RMS calculations before forwarding via USB or CAN. The 16-bit Parallel Master Port (PMP) interfaces directly to external SRAM or display controllers for high-throughput buffered capture. Industrial -40C to +85C operation and ECC memory suit harsh factory floor installations.
추천
USB Industrial Sensor Hub
The PIC32MK1024GPK064T-I/PT's dual USB Full-Speed ports (Host + Device, OTG-capable) make it a natural fit for USB-connected industrial sensor hubs that read legacy USB peripherals (scanners, scales, RFID readers) while presenting as a USB device to the host PC. Its 120 MHz core handles USB stack, sensor data parsing, and host protocol conversion concurrently. With 1 MB Flash and ECC, on-board data logging is feasible. The crypto engine authenticates USB communications. ECC RAM mitigates bit-flip errors from sustained high-throughput USB transfers. Pair with USBLC6-2SC6 ESD protection array on DP/DM lines.
추천
IIoT Edge Node with CAN Bridge
The PIC32MK1024GPK064T-I/PT's dual independent CAN 2.0B controllers enable bridging between two industrial CAN networks (e.g., CANopen and DeviceNet) or between CAN and USB/Ethernet uplinks, a common IIoT edge node requirement. Its 120 MHz performance runs CANopen stack, protocol translation, and edge analytics simultaneously. The 1 MB ECC Flash supports over-the-air firmware updates with authenticated boot via the crypto engine. Industrial temperature and ECC memory make it reliable for unattended cabinet installation. Use with MCP2562 transceivers and Microchip's MPLAB Harmony v3 CAN stack.
추천
Digital Power Conversion Controller
The PIC32MK1024GPK064T-I/PT's 120 MHz core with single-cycle MAC and high-resolution PWM peripherals (16-bit with up to 7.5 ns resolution via 120 MHz peripheral clock) suit digital control of switch-mode power supplies, PFC stages, and solar inverters. Its fast 12-bit ADC at 3.75 MSPS supports current-mode control with sub-microsecond feedback loops. ECC Flash and the 32-bit deadman timer improve functional safety for overcurrent/overvoltage protection. ECC RAM prevents silent bit flips that could cause loop instability. Pair with gate drivers like MCP14700 and current-sense amplifiers MCP6C02 for a complete SMPS controller.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MK1024GPK064T-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MK1024GPK064-I/PT | PIC32MK1024GPK064-E/PT | PIC32MK1024GPK064-I/MR |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | QFN-64 - different land pattern |
| Operating Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash | 1 MB ECC | 1 MB ECC | 1 MB ECC | 1 MB ECC |
| Temperature Grade | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) |
| USB | 2x USB FS | 2x USB FS | 2x USB FS | 2x USB FS |
| CAN | 2x CAN 2.0B (no CAN-FD) | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B |
| ADC Channels | 42 (12-bit, 3.75 MSPS) | 42 | 42 | 42 |
| Packing Format | Tape and Reel | Tray | Tray | Tray |
주요 차별점
- Dual independent USB Full-Speed with Host/Device/OTG plus dual CAN 2.0B (vs PIC32MK1024GPD064)
- 42 ADC channels from 4 independent 12-bit ADC modules at 3.75 MSPS (vs PIC32MK1024GPE064)
- ECC-protected Flash and RAM for industrial reliability (vs PIC32MX / PIC32MM series)
설계 노트
Place a 100 nF 0.1 uF X7R ceramic decoupling capacitor as close as possible to each VDD/AVDD pin pair, plus a bulk 4.7-10 uF tantalum or ceramic on the main 3.3V rail. The PIC32MK1024GPK064T-I/PT draws approximately 80 mA at 120 MHz with all peripherals active, so the regulator must sustain peak load without sagging below 2.3V. Use MCP1755 or MIC69502 LDO for clean rail generation.
For TQFP-64 0.5 mm pitch routing, use 0.2 mm (8 mil) traces with 0.2 mm spacing on a 4-layer PCB. The TQFP exposed thermal pad is not present on this package, so thermal dissipation relies entirely on the gull-wing leads to inner-layer copper pours. Keep analog ADC traces short and isolated from PWM switching traces; use a guard ring around the AVSS pin connected to a low-impedance ground pour.
Do not enable JTAG pins as GPIO without configuring FICD register first - the device may become bricked if JTAG is disabled in code without backup. The PIC32MK1024GPK064T-I/PT has two CAN 2.0B ports but no CAN-FD; if you need CAN-FD, choose PIC32MK1024MCM064 instead. Configure ECC on Flash via FSEC and on RAM via CRCCON to detect single-bit errors in electrically noisy industrial environments.
규정 준수 정보
RoHS and REACH compliant per Microchip product page. Lead-free TQFP package. Industrial temperature grade (I) -40C to +85C; choose /E grade for -40C to +125C. Not AEC-Q100 qualified - use AEC-Q100 PIC32MK variants for automotive.
