PIC32MX320F032H-40V/MR - 32-bit MIPS MCU 32KB Flash 40MHz | Microchip
부품 번호: PIC32MX320F032H-40V/MR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $5.32 | $5.32 |
| 10 | $4.79 | $47.90 |
| 100 | $3.86 | $386.00 |
| 500 | $3.27 | $1,635.00 |
| 1,000 | $2.85 | $2,850.00 |
PIC32MX320F032H-40V/MR 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a range of analog and communication peripherals. The PIC32MX3XX/4XX family uses a 5-stage pipelined MIPS32 M4K core with Harvard architecture, MIPS16e code compression for up to 40 % smaller code size, and a single-cycle hardware multiply/divide unit. PIC32MX MCUs occupy the high-performance tier within Microchip's 32-bit portfolio, above the PIC16 (LV) and dsPIC (LV) controller families in raw application complexity and below the SAM (LV) Cortex-M families in ecosystem positioning.
Key features include 32 KB Flash, 8 KB SRAM, a 10-bit 1.1 Msps ADC with up to 16 channels, USB 2.0 full-speed On-The-Go (OTG), two I²C, two SPI, two UART modules, five 16-bit timers, and a parallel master port (PMP) for external bus interfaces. The device supports 53 digital I/O pins and operates from 2.3 V to 3.6 V. Integrated DMA (8 channels) and a 5-stage pipeline deliver deterministic interrupt response for real-time tasks.
The PIC32MX320F032H is suitable for industrial automation, USB peripherals, consumer electronics, motor control, and human-machine interface (HMI) applications. Design consideration: the part requires a 3.3 V regulator, decoupling per VDD/VSS pair, and proper trace routing for the 50 MHz USB DP/DM differential pair to meet USB 2.0 signal-integrity requirements.
드롭인 대체품: PIC32MX320F032H-40V/MR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MX320F032H-40V/MR (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, Core Architecture, Data Memory (SRAM), Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MX320F032H-40I/MR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX320F032H-40V/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX320F032H-40I/PT
✅ 드롭인✓ 재고 있음
$3.32 / 개
데이터시트 보기 →PIC32MX320F064H-40V/MR
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.85 / 개
데이터시트 보기 →PIC32MX340F128H-40V/MR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC32MX360F512L-40V/MR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC32MX320F032H-40V/MR 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 M4K, 32-bit |
| Core Frequency | 40 MHz (66 DMIPS) |
| Pipeline | 5-stage |
| Flash Program Memory | 32 KB (32K x 8) |
| SRAM Data Memory | 8 KB |
| 공급 전압 | 2.3 V to 3.6 V |
| 동작 온도 | -40 °C to +105 °C (V grade) |
| ADC | 10-bit, 1.1 Msps, up to 16 channels |
| USB | USB 2.0 Full-Speed OTG |
| I²C | 2 modules |
| SPI | 2 modules |
| UART | 2 modules |
| Timers | 5 x 16-bit |
| DMA Channels | 8 |
| Digital I/O Pins | 53 |
| 패키지 | 64-pin VQFN (9x9 mm), MR suffix |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
| Programming Interface | ICSP, JTAG |
PIC32MX320F032H-40V/MR 핀 구성
| 핀 1 | SDA — I2C1 data line (or digital I/O) |
| 핀 2 | RPB0 — Remappable I/O port B bit 0 |
| 핀 3 | RPB1 — Remappable I/O port B bit 1 |
| 핀 4 | RPB2 — Remappable I/O port B bit 2 (or SCL2) |
| 핀 5 | RPB3 — Remappable I/O port B bit 3 |
| 핀 6 | RPB4 — Remappable I/O port B bit 4 |
| 핀 7 | RPB5 — Remappable I/O port B bit 5 |
| 핀 8 | VSS — Ground |
| 핀 9 | VDD — Positive supply voltage (2.3-3.6V) |
| 핀 10 | RPB6 — Remappable I/O port B bit 6 |
| 핀 11 | RPB7 — Remappable I/O port B bit 7 |
| 핀 12 | RPB8 — Remappable I/O port B bit 8 |
| 핀 13 | RPB9 — Remappable I/O port B bit 9 |
| 핀 14 | RPB10 — Remappable I/O port B bit 10 |
| 핀 15 | RPB11 — Remappable I/O port B bit 11 |
| 핀 16 | VSS — Ground |
| 핀 17 | VDD — Positive supply voltage (2.3-3.6V) |
| 핀 18 | RPB12 — Remappable I/O port B bit 12 |
| 핀 19 | RPB13 — Remappable I/O port B bit 13 |
| 핀 20 | RPB14 — Remappable I/O port B bit 14 |
| 핀 21 | RPB15 — Remappable I/O port B bit 15 |
| 핀 22 | RPC0 — Remappable I/O port C bit 0 |
| 핀 23 | RPC1 — Remappable I/O port C bit 1 |
| 핀 24 | RPC2 — Remappable I/O port C bit 2 |
| 핀 25 | RPC3 — Remappable I/O port C bit 3 |
| 핀 26 | RPC4 — Remappable I/O port C bit 4 |
| 핀 27 | RPC5 — Remappable I/O port C bit 5 |
| 핀 28 | VSS — Ground |
| 핀 29 | VDD — Positive supply voltage (2.3-3.6V) |
| 핀 30 | RPC6 — Remappable I/O port C bit 6 |
| 핀 31 | RPC7 — Remappable I/O port C bit 7 |
| 핀 32 | RPC8 — Remappable I/O port C bit 8 |
| 핀 33 | RPC9 — Remappable I/O port C bit 9 |
| 핀 34 | TMS — JTAG test mode select |
| 핀 35 | TCK — JTAG test clock |
| 핀 36 | TDI — JTAG test data in |
| 핀 37 | TDO — JTAG test data out |
| 핀 38 | VSS — Ground |
| 핀 39 | VDD — Positive supply voltage (2.3-3.6V) |
| 핀 40 | OSC1 — Crystal oscillator input (primary) |
| 핀 41 | OSC2 — Crystal oscillator output (primary) |
| 핀 42 | VSS — Ground |
| 핀 43 | VDD — Positive supply voltage (2.3-3.6V) |
| 핀 44 | RPD0 — Remappable I/O port D bit 0 |
| 핀 45 | RPD1 — Remappable I/O port D bit 1 |
| 핀 46 | RPD2 — Remappable I/O port D bit 2 |
| 핀 47 | RPD3 — Remappable I/O port D bit 3 |
| 핀 48 | RPD4 — Remappable I/O port D bit 4 |
| 핀 49 | RPD5 — Remappable I/O port D bit 5 |
| 핀 50 | RPD6 — Remappable I/O port D bit 6 |
| 핀 51 | RPD7 — Remappable I/O port D bit 7 |
| 핀 52 | RPD8 — Remappable I/O port D bit 8 |
| 핀 53 | RPD9 — Remappable I/O port D bit 9 |
| 핀 54 | RPD10 — Remappable I/O port D bit 10 |
| 핀 55 | RPD11 — Remappable I/O port D bit 11 |
| 핀 56 | VSS — Ground |
| 핀 57 | VDD — Positive supply voltage (2.3-3.6V) |
| 핀 58 | D+/DP — USB D+ (differential data) |
| 핀 59 | D-/DM — USB D- (differential data) |
| 핀 60 | VBUS — USB bus voltage detect |
| 핀 61 | VUSB3V3 — USB internal 3.3V regulator output |
| 핀 62 | RPE0 — Remappable I/O port E bit 0 |
| 핀 63 | RPE1 — Remappable I/O port E bit 1 |
| 핀 64 | RPE2 — Remappable I/O port E bit 2 |
일반적인 애플리케이션
PIC32MX320F032H-40V/MR 적합 용도: 6 애플리케이션s: USB Peripherals and HID Devices, Industrial Sensor Monitoring and Control, Human-Machine Interface (HMI) with LCD, Motor Control and BLDC Drivers, Consumer Electronics with USB Charging, Data Logging and Edge IoT Gateways.
USB Peripherals and HID Devices
The PIC32MX320F032H-40V/MR's integrated USB 2.0 Full-Speed OTG controller with internal transceiver and 1.5 kΩ pull-up makes it ideal for USB peripherals such as HID-class devices, USB-to-serial bridges, and USB audio class (UAC) speakers/microphones. The 40 MHz MIPS M4K core delivers 66 DMIPS, sufficient to process USB isochronous audio streams at 48 kHz sample rate with minimal CPU load. For typical USB mouse or keyboard designs, the MCU handles HID report generation, button debouncing, and LED indicators while consuming < 30 mA from the USB VBUS rail. Place the USB DP/DM traces as a 90 Ω differential pair with the required 50 MHz clock crystal for stable full-speed operation.
추천
Industrial Sensor Monitoring and Control
With 53 digital I/O pins, an 8-channel DMA, and a 10-bit 1.1 Msps ADC capable of 16 inputs, the PIC32MX320F032H-40V/MR fits industrial sensor monitoring applications including PLC I/O expansion, multi-channel thermocouple reading, and 4-20 mA signal acquisition. The -40 °C to +105 °C V-grade temperature range supports factory-floor deployment in unconditioned enclosures. The 5-stage MIPS pipeline with deterministic interrupt response handles real-time control loops at < 1 ms latency, and the parallel master port (PMP) enables fast external bus access to FPGA co-processors or graphics LCDs. Two UART, two SPI, and two I²C provide the multi-protocol bridging typical of sensor hub applications.
추천
Human-Machine Interface (HMI) with LCD
The PIC32MX320F032H-40V/MR integrates a parallel master port (PMP) that drives graphical LCDs (TFT 320x240) and character LCDs directly, with DMA support to refresh the frame buffer without CPU intervention. The 53 I/O pins support both the 8/16-bit PMP bus plus a 4x4 keypad matrix and 4 PWM channels for brightness. Combined with USB OTG for firmware updates and a 40 MHz core for menu responsiveness, the part fits low-cost HMI panels used in appliances, building automation keypads, and small industrial operator panels. The PIC32MX3725 (256KB) family members scale up for richer UIs.
추천
Motor Control and BLDC Drivers
The PIC32MX320F032H-40V/MR provides 5 x 16-bit timers, 8 DMA channels, and 53 I/O pins - sufficient to control a 3-phase BLDC motor with sensorless or Hall-sensor feedback. The 5-stage MIPS core and hardware multiply/divide unit deliver the deterministic interrupt response needed for 20 kHz PWM switching frequency with low jitter, and the 1.1 Msps ADC samples back-EMF and current-sense signals at > 100 ksps for sensorless FOC algorithms. Combined with the -40 to +105 °C V-grade temperature range, the MCU is appropriate for under-hood automotive pumps and small industrial BLDC drives.
추천
Consumer Electronics with USB Charging
The PIC32MX320F032H-40V/MR's USB OTG controller with battery charger detection (BC1.1/2.0) enables USB-powered devices such as portable speakers, charging docks, and USB hubs. The 32 KB Flash is enough for firmware implementing USB CDC, HID, and BCD classes, while the 8 KB SRAM buffers audio data at 48 kHz. The V-grade temperature range (-40 to +105 °C) is more than sufficient for indoor consumer products. For battery-powered applications, the MCU's low-power sleep modes (< 50 µA typical) extend battery life.
추천
Data Logging and Edge IoT Gateways
The PIC32MX320F032H-40V/MR combines 32 KB Flash for application firmware, 8 KB SRAM for buffering, and 8 DMA channels for parallel sensor sampling - a useful base for edge IoT data-acquisition gateways. The 10-bit ADC samples analog sensors (temperature, pressure, light), the two UARTs handle RS-485/RS-232 sensor buses, and the SPI/I²C connect to digital sensors. Firmware stores data logs in external EEPROM via I²C and reports summaries via USB to a host. For battery-powered edge nodes, the low-power sleep mode combined with RTC timer wake-up enables multi-month battery life on 2x AA cells.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MX320F032H-40V/MR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MX320F032H-40I/MR | PIC32MX320F032H-40V/PT | PIC32MX320F032H-40I/PT | PIC32MX320F064H-40V/MR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-VQFN (9x9 mm) | 64-VQFN (9x9 mm) - same | 64-TQFP - same die, different footprint | 64-TQFP - same die, different footprint | 64-VQFN (9x9 mm) - same |
| Flash | 32 KB | 32 KB | 32 KB | 32 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Core Frequency | 40 MHz (66 DMIPS) | 40 MHz (66 DMIPS) | 40 MHz (66 DMIPS) | 40 MHz (66 DMIPS) | 40 MHz (66 DMIPS) |
| Operating Temperature | -40 °C to +105 °C (V grade) | -40 °C to +85 °C (I grade) | -40 °C to +105 °C (V grade) | -40 °C to +85 °C (I grade) | -40 °C to +105 °C (V grade) |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG |
| ADC | 10-bit, 16 ch, 1.1 Msps | 10-bit, 16 ch, 1.1 Msps | 10-bit, 16 ch, 1.1 Msps | 10-bit, 16 ch, 1.1 Msps | 10-bit, 16 ch, 1.1 Msps |
주요 차별점
- Highest temperature grade for industrial deployment (vs PIC32MX320F032H-40I/MR)
- VQFN-64 footprint for compact designs (vs PIC32MX320F032H-40V/PT)
- Migration path available to higher-memory VQFN-64 variants (vs PIC32MX320F064H-40V/MR)
설계 노트
The PIC32MX320F032H-40V/MR requires a clean 3.3 V supply (2.3-3.6 V range). Place a 100 nF decoupling capacitor on each VDD/VSS pin pair, plus a single 10 µF bulk capacitor near the IC. Use a low-noise LDO such as the Microchip MCP1700-3302E (250 mA, 1.6 µVrms) - the MCU's ADC accuracy is sensitive to supply ripple. For USB applications, the internal 3.3 V USB regulator (VUSB3V3 pin) requires a 4.7 µF external capacitor; do not load this pin with external circuitry.
The 64-VQFN (9x9 mm) package has an exposed thermal pad (EP) on the underside that MUST be soldered to a ground copper pad of at least the same size for mechanical reliability and thermal dissipation. The EP pin should be tied directly to the ground plane with multiple thermal vias (0.25 mm²) to a ground layer for best heat dissipation - the part typically dissipates < 100 mW at 40 MHz full load. VQFN packages are more difficult to rework than TQFP; plan accordingly for prototypes.
Common pitfalls: (1) Forgetting to tie the VBUS pin to 5 V even in self-powered USB designs - VBUS detection is required by USB spec. (2) Failing to configure the JTAG pins as digital I/O when JTAG is unused - the JTAG controller takes precedence on reset, locking the pins until unlocked. (3) Not enabling the internal FRC postscaler at the right PLL multiplier when moving from 8 MHz FRC to 40 MHz SYSCLK - the PLL loop filter requires 10 µs lock time. (4) Placing the 50 MHz USB reference clock crystal too far from the MCU - the trace length must be < 5 mm to avoid jitter.
USB 2.0 Full-Speed signal-integrity: route D+/DP and D-/DM as a 90 Ω differential pair with controlled impedance, length-matched within 2 mm, and kept away from noisy digital traces. Add a 90 Ω common-mode choke (e.g., Murata DLW21SN) on each line near the connector to suppress EMI. The DP/DM pads should have a 50 Ω termination to ground through a ferrite bead for common-mode filtering. Avoid right-angle bends; use 45-degree bends or arcs.
규정 준수 정보
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - for AEC-Q100 automotive, consider the PIC32MX1xx/2xx family. Operating temperature V grade (-40 to +105 °C) suitable for industrial applications.
