PIC32MX575F256LT-80I/PT - 32-bit 80MHz MCU 256KB Flash USB CAN | Microchip
부품 번호: PIC32MX575F256LT-80I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.2 | $7.20 |
| 10 | $6.48 | $64.80 |
| 100 | $5.62 | $562.00 |
| 500 | $4.95 | $2,475.00 |
| 1,000 | $4.35 | $4,350.00 |
PIC32MX575F256LT-80I/PT 개요
An MCC product line is a class of high-performance microcontrollers built around the MIPS32 M4K core, designed for embedded applications that require more processing power than 8/16-bit MCUs while retaining peripheral integration. The PIC32MX5/6/7XX family supports USB, CAN, and Ethernet connectivity, suiting industrial, consumer, and automotive subsystems where deterministic interrupt latency and a rich peripheral set are required.
Key features include 256KB Flash (256K x 8), 64KB RAM, 85 I/O pins, and 16-channel 10-bit ADC. The device integrates USB OTG full-speed, one CAN module, SPI, I2C, and UART. DMA, PMP, and a 5-bit RTCC are also present, and the part runs from 2.3V to 3.6V across the industrial -40C to +85C range.
Architecturally the M4K core delivers 1.56 DMIPS/WMC with single-cycle bit-shaded math and hardware multiply/divide, easing protocol parsing and DSP-style loops. Five 16-bit timers/capture/compare and two comparators/PWM modules complement the timers, allowing closed-loop motor and power-conversion control. Code execution is from Flash with a prefetch module that hides Flash access latency.
Typical applications include industrial automation, USB peripherals, automotive CAN nodes, and graphic display HMIs. The wide peripheral mix also suits barcode scanners, point-of-sale terminals, and home medical monitors. The PIC32MX575F256LT-80I/PT is supported by MPLAB X IDE, XC32 compiler, and PICkit 5 debugger.
For power, plan decoupling at each VDD/VSS pair and route the analog AVdd/AVss pair through a ferrite to reduce ADC noise.
This page combines current distributor pricing, drop-in alternatives within the PIC32MX5XX family, and engineering design notes not found in the manufacturer datasheet.
드롭인 대체품: PIC32MX575F256LT-80I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MX575F256LT-80I/PT (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, DMA Channels, Program Memory (Flash), CAN Interface.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MX575F256L-80I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX575F256LT-80I/PF
✅ 드롭인✓ 재고 있음
$4.85 / 개
데이터시트 보기 →PIC32MX675F256L-80I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX564F128LT-I/PT
✅ 드롭인✓ 재고 있음
$4.78 / 개
데이터시트 보기 →PIC32MX575F256L-80V/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX575F256HT-80I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.89 / 개
데이터시트 보기 →PIC32MX575F256LT-80I/PT 최대 정격 & 전기적 특성
| Core | MIPS32 M4K |
| Core Size | 32-Bit |
| Maximum Clock Speed | 80 MHz |
| Program Memory Size | 256 KB (256K x 8) Flash |
| RAM Size | 64 KB (64K x 8) |
| 동작 공급 전압 | 2.3 V to 3.6 V |
| Number of I/O | 85 |
| Connectivity | CAN, I2C, SPI, UART/USART, USB OTG |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| ADC | 16-channel 10-bit |
| 데이터 버스 폭 | 32-bit |
| 동작 온도 | -40 C to +85 C (Industrial) |
| 실장 유형 | Surface Mount |
| 패키지 | 100-TQFP (12x12 mm) |
| RoHS 상태 | Compliant |
| MSL 레벨 | 3 |
| Series | PIC32MX5XX/6XX/7XX |
PIC32MX575F256LT-80I/PT 100-tqfp (12x12 mm) 핀 구성 가이드
PIC32MX575F256LT-80I/PT(100-tqfp (12x12 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC32MX575F256LT-80I/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC32MX575F256LT-80I/PT 적합 용도: 6 애플리케이션s: Industrial Automation Controllers, USB Peripheral Devices, Automotive CAN Nodes, Graphic Display HMIs, Medical Monitoring Devices, Point-of-Sale Terminals.
Industrial Automation Controllers
The PIC32MX575F256LT-80I/PT fits industrial PLC and motor-drive controllers thanks to its 80MHz MIPS32 M4K core delivering 1.56 DMIPS/MHz and the integrated CAN 2.0B module running at 1 Mbit/s for fieldbus comms. The 16-channel 10-bit ADC samples 4-wire sensor inputs at up to 500 ksps, while five 16-bit timers drive PWM outputs for variable-frequency drives. 256KB Flash holds IEC 61131-3 runtime plus custom ladder logic, and 64KB RAM buffers MODBUS and EtherNet/IP packets. Hardware DMA offloads encoder counting from the CPU. The -40C to +85C industrial temperature range supports cabinet-mounted use.
추천
USB Peripheral Devices
The PIC32MX575F256LT-80I/PT's full-speed USB OTG controller makes it a strong fit for USB peripherals such as barcode scanners, HID input devices, and USB-to-CAN bridges. The integrated USB OTG supports device, host, and OTG roles without an external PHY, saving BOM cost. With 256KB Flash and 64KB RAM, the MCU can host USB stacks, vendor class drivers, and dual-role HID + vendor interfaces concurrently. DMA channels manage USB endpoint packets with minimal CPU load. The 12x12mm TQFP-100 footprint fits compact handheld enclosures.
추천
Automotive CAN Nodes
The PIC32MX575F256LT-80I/PT powers automotive CAN nodes such as body controllers, HVAC panels, and instrument clusters via its integrated CAN 2.0B module and 85 GPIO lines for switches, LEDs, and relay drivers. The 80MHz core processes OBD-II and UDS stacks within 256KB Flash, while 64KB RAM buffers diagnostic messages. Hardware acceptance filters reduce CAN interrupt load. The industrial -40C to +85C operating range covers cabin and under-hood-cowl mounting. CAN bit times up to 1 Mbit/s suit CAN-FD transitional designs.
추천
Graphic Display HMIs
The PIC32MX575F256LT-80I/PT drives small TFT LCD graphic HMIs in appliances, point-of-sale terminals, and industrial control panels via its Parallel Master Port (PMP) interface, DMA, and 80MHz CPU throughput. 256KB Flash stores menu assets, fonts, and UI logic, while 64KB RAM holds framebuffers up to 320x240 at 16-bit color. SPI and I2C peripherals expand to touch controllers and EEPROMs. Five 16-bit timers manage backlight PWM and key-scan cycles. The 85 GPIO drive character LCDs directly when PMP is not used.
추천
Medical Monitoring Devices
The PIC32MX575F256LT-80I/PT fits portable medical monitoring devices such as pulse oximeters, blood-pressure cuffs, and home-care hubs thanks to its 16-channel 10-bit ADC for sensor front-ends, USB OTG for charging and data sync, and 80MHz MIPS core for signal processing. 256KB Flash holds FDA-validated firmware, while 64KB RAM buffers waveform data before Bluetooth/USB upload. The 2.3V-3.6V range supports direct Li-ion battery operation. Hardware DMA keeps ADC sample streams moving without CPU intervention.
추천
Point-of-Sale Terminals
The PIC32MX575F256LT-80I/PT's decision engine in compact point-of-sale terminals with credit card readers, thermal heads, and Ethernet backhaul. Per Lin (2024). USB OTG + CAN + 80MHz handle card encryption and dual-NIC stacks. 256KB Flash and 64KB RAM fit TLS, mag-stripe, and EMV libraries. The 85 GPIO drive keypads, displays, and thermal printers via PMP. Industrial -40C to +85C supports retail freezers and outdoor kiosks.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MX575F256LT-80I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MX575F256L-80I/PT | PIC32MX575F256LT-80I/PF | PIC32MX675F256L-80I/PT | PIC32MX564F128LT-I/PT | PIC32MX575F256L-80V/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (12x12 mm) | 100-TQFP (12x12 mm) - same | 100-TQFP (14x14 mm) - same silicon, larger pkg | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same |
| Flash | 256 KB | 256 KB | 256 KB | 256 KB | 128 KB (-50%) | 256 KB |
| RAM | 64 KB | 64 KB | 64 KB | 64 KB | 32 KB (-50%) | 64 KB |
| Core Speed | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| USB OTG | Yes (FS) | Yes (FS) | Yes (FS) | Yes (FS) | Yes (FS) | Yes (FS) |
| CAN | 1x CAN 2.0B | 1x CAN 2.0B | 1x CAN 2.0B | 1x CAN 2.0B | 1x CAN 2.0B | 1x CAN 2.0B |
| Ethernet | No | No | No | Yes (10/100 MAC) | No | No |
| Temperature Range | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +105C (V) |
주요 차별점
- Tape-and-reel packaging for high-volume SMT assembly (vs PIC32MX575F256L-80I/PT (tray))
- Compact 12x12mm TQFP-100 package saves PCB area (vs PIC32MX575F256LT-80I/PF (14x14mm TQFP-100))
- Full PIC32MX575 superset compatibility with /675 Ethernet option (vs PIC32MX675F256L-80I/PT)
설계 노트
Place 100nF ceramic bypass caps at every VDD/VSS pin pair, with additional 10uF bulk caps at the analog AVDD/AVSS rails. Route AVSS directly to a clean ground island to keep ADC noise below 1 LSB. Brown-out reset (BOR) is enabled by default to prevent corrupted Flash writes below 2.3V.
Route the 80MHz MIPS32 clock trace over a continuous ground plane, keep clock trace to <25mm, and series-terminate the 8MHz crystal load capacitors close to the OSC1/OSC2 pins. Place the USB D+/D- pair as a 90-ohm differential microstrip and route parallel within 0.15mm tolerance to meet USB 2.0 FS signal-integrity.
The PIC32MX575F256L family requires a 4-cycle Flash prefetch wait state at 80MHz - failure to enable this in the system register (CHECON<PFMWAIT>) causes subtle code-fetch errors. Also configure the peripheral bus divider (CHECON<PBDIV>) at the system frequency / 4 default for peripheral access at 20MHz. Missing these settings is the #1 cause of 'works in debugger but not standalone' issues.
Use separate analog and digital ground islands with a single-point tie at the MCU AVSS pin. Keep ADC traces away from switching power and PWM traces by at least 3mm. Place the 32.768kHz secondary oscillator (SOSC) load caps close to SOSCI/SOSCO. Use guard rings around the analog AVSS connection to suppress digital switching noise injection.
규정 준수 정보
RoHS compliant per Microchip product page. Industrial temperature grade - not AEC-Q100 qualified; choose /V (extended temp) variants for harsh thermal environments. Lead-free reflow profile per JEDEC J-STD-020.
