PIC32MX575F256LT-80V/PT - 80MHz 256KB Flash 32-bit MCU | Microchip
부품 번호: PIC32MX575F256LT-80V/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.85 | $7.85 |
| 10 | $7.2 | $72.00 |
| 100 | $6.45 | $645.00 |
| 500 | $5.7 | $2,850.00 |
| 1,000 | $5.05 | $5,050.00 |
PIC32MX575F256LT-80V/PT 개요
A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and integrated peripherals including ADCs, timers, and communication controllers. The PIC32MX5XX/6XX/7XX family sits in the hierarchy as: microcontroller -> embedded computing -> semiconductor, and bridges 8-bit PIC16/PIC18 simplicity with 32-bit performance, targeting USB/CAN-enabled industrial, medical, and consumer devices.
Key features of the PIC32MX575F256LT-80V/PT include 83 general-purpose I/O lines, 16-channel 10-bit ADC at 1 Msps, multiple DMA channels for low-CPU-overhead data movement, hardware RTCC, 5 timer/counter modules, and peripheral pin select (PPS) for flexible signal routing. The "V" suffix denotes the V-temp grade of -40C to +105C operation, suitable for industrial environments; the "T" denotes tape-and-reel packaging; and the "/PT" denotes the 100-pin TQFP package.
Architecturally, the PIC32MX575 uses the MIPS32 M4K core with 5-stage pipeline, single-cycle multiply, and hardware divide. It supports 32-bit instructions and 32-bit data paths while remaining code-compatible with legacy 16-bit PIC instruction extensions. The M4K core combined with tightly-coupled DMA offloads data transfers from the CPU for deterministic latency.
Typical applications include USB peripherals (HID, CDC, mass storage), CAN-connected industrial nodes, motor control (BLDC, stepper, servo), graphical HMI with external LCD controllers, and sensor data acquisition. The integrated USB-OTG and CAN make it especially suitable for industrial automation, medical instrumentation, and automotive body/comfort subsystems.
When designing with this part, mind the 2.3V-3.6V supply range and ensure decoupling caps are placed per the datasheet. PPS requires careful pin mapping during firmware bring-up; verify PPS assignments in code review to avoid silent peripheral failures. This page consolidates distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet.
드롭인 대체품: PIC32MX575F256LT-80V/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MX575F256LT-80V/PT (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, DMA Channels, CAN, Core Architecture.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MX575F256L-80V/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX575F256LT-80I/PT
✅ 드롭인✓ 재고 있음
$4.35 / 개
데이터시트 보기 →PIC32MX575F256LT-80V/BG
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$6.84 / 개
데이터시트 보기 →PIC32MX575F256LT-80V/PF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$5.65 / 개
데이터시트 보기 →PIC32MX575F256L-80I/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC32MX575F256L-80I/PF
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC32MX575F256L-80I/BG
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$6.12 / 개
데이터시트 보기 →PIC32MX575F256L-80V/PF
✅ 드롭인✓ 재고 있음
$6.55 / 개
데이터시트 보기 →PIC32MX575F256LT-80V/PT 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 M4K |
| 데이터 버스 폭 | 32-bit |
| Maximum CPU Speed | 80 MHz |
| Program Memory (Flash) | 256 KB |
| Data SRAM | 64 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Operating Temperature Range (V grade) | -40 C to +105 C |
| 패키지 | 100-pin TQFP (12x12 mm) |
| 실장 유형 | Surface Mount |
| General Purpose I/O | 83 |
| ADC | 10-bit, 16-channel, 1 Msps |
| Communication Interfaces | USB-OTG, CAN, UART, I2C, SPI |
| DMA Channels | Yes (multiple) |
| Timer/Counter Modules | 5 |
| Peripheral Pin Select (PPS) | Yes |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
PIC32MX575F256LT-80V/PT 100-pin tqfp (12x12 mm) 핀 구성 가이드
PIC32MX575F256LT-80V/PT(100-pin tqfp (12x12 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC32MX575F256LT-80V/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC32MX575F256LT-80V/PT 적합 용도: 6 애플리케이션s: USB Industrial Sensor Hub, CAN-Connected Motor Controller, Medical Point-of-Care Device, Automotive Body Control Module, Graphical HMI with External LCD, USB Data Acquisition Module.
USB Industrial Sensor Hub
The PIC32MX575F256LT-80V/PT's integrated USB-OTG full-speed controller and 83 GPIO make it ideal for industrial USB sensor hubs. The 256 KB Flash supports USB stack plus application code; the 80 MHz MIPS M4K core handles enumeration and data transfer with low CPU overhead. Placed as the bridge between upstream USB host and downstream I2C/SPI sensors, with the 10-bit ADC at 1 Msps handling analog sensor channels.
추천
CAN-Connected Motor Controller
The PIC32MX575F256LT-80V/PT combines an integrated CAN controller with 5 timer/counter modules and DMA, suiting BLDC and stepper motor control. The 80 MHz core drives FOC algorithms while CAN bus handles real-time command exchange; the 16-channel 10-bit ADC samples back-EMF and current sensing. V-temp grade (-40C to +105C) supports industrial motor enclosures.
추천
Medical Point-of-Care Device
The PIC32MX575F256LT-80V/PT fits medical point-of-care instruments requiring USB connectivity for data upload, plus deterministic ADC sampling for diagnostic sensors. The 256 KB Flash enables USB CDC/HID stacks alongside application logic; PPS allows flexible PCB routing on dense medical boards. The integrated DMA offloads ADC-to-memory transfers for accurate signal acquisition.
추천
Automotive Body Control Module
The PIC32MX575F256LT-80V/PT's CAN interface, V-temp grade, and 83 GPIO suit body control modules for lighting, mirrors, and comfort subsystems. The 64 KB SRAM handles CAN message buffering and PWM generation for LED drivers; the 5 timers generate PWM outputs for motors and dimming. V-temp (-40C to +105C) supports cabin and engine-bay-adjacent environments.
추천
Graphical HMI with External LCD
The PIC32MX575F256LT-80V/PT drives graphical HMIs through SPI or parallel interfaces to external LCD controllers, leveraging 80 MHz throughput for smooth UI rendering. The 256 KB Flash stores UI assets and fonts; PPS allows flexible mapping of display control signals. Multiple DMA channels manage background refresh without CPU intervention, supporting up to 320x240 QVGA panels.
추천
USB Data Acquisition Module
The PIC32MX575F256LT-80V/PT is well-suited for USB-connected data acquisition modules where the 16-channel 10-bit ADC at 1 Msps handles multi-channel analog input. The integrated USB-OTG streams acquisition data to a host PC; DMA channels transfer ADC samples to USB endpoints with minimal CPU load. V-temp grade supports industrial test and measurement environments.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MX575F256LT-80V/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MX575F256L-80V/PT | PIC32MX575F256LT-80I/PT | PIC32MX575F256LT-80V/BG | PIC32MX575F256L-80V/PF |
|---|---|---|---|---|---|
| Package | TQFP-100 (PT, 12x12 mm) | TQFP-100 (PT) - same | TQFP-100 (PT) - same | TQFP-100 (PT) - same | TQFP-100 (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Architecture | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit |
| Maximum CPU Speed | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash / SRAM | 256 KB / 64 KB | 256 KB / 64 KB | 256 KB / 64 KB | 256 KB / 64 KB | 256 KB / 64 KB |
| Temperature Grade | V (-40C to +105C) | V (-40C to +105C) | I (-40C to +85C) | V (-40C to +105C) | V (-40C to +105C) |
| Packaging Format | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tray |
| Integrated USB-OTG | Yes | Yes | Yes | Yes | Yes |
| Integrated CAN | Yes | Yes | Yes | Yes | Yes |
주요 차별점
- V-temp grade operation up to +105C (vs PIC32MX575F256LT-80I/PT)
- Tape-and-reel packaging for SMT production (vs PIC32MX575F256L-80V/PT)
- Pin-compatible upgrade path to PIC32MX570 family (vs PIC32MX570F512LT-V/PT)
설계 노트
Decouple all VDD/AVDD pins with 100 nF ceramic caps placed as close to the pins as possible (per Microchip datasheet DS60001156K). Add a single 10 uF bulk tantalum or ceramic cap on each major supply rail. The PIC32MX575 has multiple VDD pins; missing any one can cause intermittent resets or ADC accuracy degradation. Place an LC or ferrite bead on analog AVDD to isolate from digital switching noise.
Peripheral Pin Select (PPS) mapping must be configured in firmware before using remappable digital peripherals. A peripheral assigned to an unmapped pin will appear silent - no error, no output. Always declare PPS mappings at startup and verify them in code review. Also note that analog functions bypass PPS and must be wired to dedicated analog pins.
The 100-pin TQFP has a 0.4 mm pitch requiring careful PCB layout. Use 4-layer stack-up with continuous ground plane under the MCU to provide reference for high-speed signals and thermal dissipation. USB D+/D- traces must be 90 ohm differential with matched length; route over an unbroken ground plane to maintain impedance.
The 80 MHz system clock generates harmonics up to 400+ MHz. Keep clock traces short and shielded with ground vias. If using external crystal, place the load caps within 3 mm of the OSC1/OSC2 pins and keep the crystal case grounded. Avoid routing high-speed signals (USB, SPI at >10 MHz) under the MCU or near the ADC inputs.
규정 준수 정보
RoHS and REACH compliance per Microchip product page; AEC-Q100 qualification status not stated in available data; halogen-free status unknown from verified data.
