R5F100PJAFA#30 - 32MHz 256KB RL78/G13 MCU | Renesas
부품 번호: R5F100PJAFA#30 ✓ 활성R5F100PJAFA#30 개요
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals on one die. Within the embedded-control hierarchy, the RL78/G13 belongs to the 16-bit MCU family and combines real-time processing with low-power operation. Its operating range of -40°C to +85°C supports industrial and commercial equipment, while a 1.6V to 5.5V supply range allows flexible integration into low-voltage embedded systems.
The RL78/G13 architecture delivers 43.2 DMIPS at 32MHz and includes an on-chip oscillator and data flash. The device is designed for general-purpose applications requiring fast execution, moderate memory capacity, and low standby consumption. Its operating current of 66µA/MHz and STOP-mode current of 230nA are important when the controller spends much of its service cycle waiting for an external event.
Integrated resources reduce the need for external components in appliance controls, industrial controllers, and compact measurement equipment. Renesas describes built-in safety functions that detect illegal hardware operation. The manufacturer also identifies support for household-appliance safety requirements, allowing engineers to evaluate the device for systems where predictable reset behavior and operating-state validation are important.
Typical uses include household appliances, industrial automation equipment, environmental controllers, sensor-conditioning systems, and low-power embedded products. The 256KB flash capacity accommodates larger control programs, while 20KB of RAM supports working data and intermediate calculations. The 100-pin LQFP package provides enough peripheral connections for designs requiring multiple external interfaces.
Designers should confirm pin assignments, peripheral configurations, and clock settings against the RL78/G13 data sheet before layout release. Decoupling, programming access, reset handling, and unused-pin treatment are equally important because firmware and hardware behavior depend on correct board implementation. The 100-pin package also requires careful planning for routing and heat dissipation during assembly.
This product page combines the manufacturer's RL78/G13 product information with distributor technical summaries, package details, a parameter comparison, and practical integration guidance. It is intended to help engineers identify the correct electrical limits, understand the memory and performance envelope, and select a verified replacement before committing to a 100-LQFP PCB design.
드롭인 대체품: R5F100PJAFA#30 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
R5F100PJAFA#10
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
R5F100PJAFA#X0
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
R5F100PJAFA#V0
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
R5F100PJAFA#30 최대 정격 & 전기적 특성
| Product Type | 16-bit microcontroller IC |
| Series | RL78/G13 |
| Maximum CPU Frequency | 32MHz |
| Core Performance | 43.2 DMIPS at 32MHz |
| Flash Memory | 256KB (256K x 8) |
| RAM | 20KB |
| 동작 공급 전압 | 1.6V to 5.5V |
| 동작 온도 | -40°C to +85°C |
| Active CPU Current | 66µA/MHz |
| STOP Mode Current | 230nA |
| 패키지 | 100-LQFP (14mm x 20mm) |
| 핀 수 | 100 pins |
| 실장 유형 | Surface mount |
| On-Chip Oscillator | Yes |
| Safety Feature | Illegal-operation hardware detection function |
| RoHS 상태 | Compliant |
R5F100PJAFA#30 100-lqfp (14mm x 20mm) 핀 구성 가이드
R5F100PJAFA#30(100-lqfp (14mm x 20mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: R5F100PJAFA#30.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
R5F100PJAFA#30 적합 용도: 6 애플리케이션s: Household Appliance Control, Industrial Automation Controller, Sensor Conditioning and Monitoring, Low-Power Embedded System, Communication Equipment, Compact Control Module.
Household Appliance Control
The R5F100PJAFA#30 fits appliance controllers that combine a user interface, motor or heater control, and safety monitoring on one board. Its 256KB of flash can hold a substantial control application, while 20KB of RAM supports state machines, timers, and display buffers. The 32MHz core provides 43.2 DMIPS for responsive task scheduling, and the 1.6V to 5.5V operating range supports low-voltage system rails. Its illegal-operation hardware detection feature can assist controllers that require deterministic fault recognition during startup or unexpected operating conditions.
추천
Industrial Automation Controller
For industrial automation, the R5F100PJAFA#30 provides a useful combination of 43.2 DMIPS performance, 256KB flash, and 20KB RAM in a 100-pin package. The 100 available positions allow designers to connect digital I/O, communications interfaces, and control signals without moving to a very large package. Its -40°C to +85°C operating range covers demanding commercial and industrial environments, while STOP-mode consumption of 230nA supports low-duty-cycle monitoring functions. Firmware should use the on-chip oscillator only when its accuracy meets the control-loop requirements.
추천
Sensor Conditioning and Monitoring
The R5F100PJAFA#30 is suitable for compact sensor-monitoring equipment that must acquire measurements, apply filtering, and report results through local interfaces. Its on-chip A/D converter supports analog measurement tasks, and the 20KB RAM provides space for calibration tables, moving averages, and status information. The 32MHz processing rate allows multiple acquisition and control tasks to coexist with communication handling. Because the device also includes an on-chip data flash, designers can use that resource for nonvolatile configuration or recorded data where its exact capacity and endurance satisfy the application requirements.
추천
Low-Power Embedded System
The R5F100PJAFA#30 supports low-power embedded designs that alternate between active processing and long standby intervals. Its CPU operating current of 66µA/MHz allows useful processing capacity without requiring a high clock rate, and its STOP-mode current of 230nA is appropriate for systems that wake periodically to inspect sensors or service a communications link. The 1.6V minimum operating voltage also allows direct integration with low-voltage energy-harvesting front ends after appropriate regulation. System-level power measurements should include pull networks, external sensors, and peripherals outside the MCU.
추천
Communication Equipment
The R5F100PJAFA#30 can serve as the control processor in communication equipment requiring a mix of protocol handling, local status monitoring, and user configuration. Its 256KB flash provides room for protocol stacks and configuration data, while the 32MHz core and 43.2 DMIPS rating support responsive packet handling and interrupt-driven I/O. The broad 100-LQFP pin count can accommodate multiple serial interfaces, indicators, and control signals. Designers should budget pin multiplexing, interrupt priorities, and firmware RAM carefully because communications buffers can consume a substantial portion of the 20KB available.
추천
Compact Control Module
The R5F100PJAFA#30 is suitable for compact embedded modules that consolidate general-purpose control into a single device. Its 100-LQFP package exposes a broad set of I/O while retaining a 14mm by 20mm footprint, allowing more connection options than a small leaded package. The internal oscillator reduces the component count in designs that do not require exceptional timing accuracy. For battery-backed equipment, firmware can exploit STOP mode between work intervals and retain configuration in data flash. Production designs should confirm programming access and provide a reliable recovery path for firmware updates.
추천
추천 제품 요약
엔지니어링 참조 데이터: R5F100PJAFA#30 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | R5F100PJAFA#10 | R5F100PJAFA#X0 | R5F100PJAFA#V0 |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 100-LQFP (14mm x 20mm) | 100-LQFP (14mm x 20mm) | 100-LQFP (14mm x 20mm) | 100-LQFP (14mm x 20mm) |
| Series | RL78/G13 | RL78/G13 | RL78/G13 | RL78/G13 |
| Maximum CPU Frequency | 32MHz | 32MHz | 32MHz | 32MHz |
| Flash Memory | 256KB | 256KB | 256KB | 256KB |
| RAM | 20KB | 20KB | 20KB | 20KB |
| Operating Supply Voltage | 1.6V to 5.5V | 1.6V to 5.5V | 1.6V to 5.5V | 1.6V to 5.5V |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
| Core Performance | 43.2 DMIPS at 32MHz | 43.2 DMIPS at 32MHz | 43.2 DMIPS at 32MHz | 43.2 DMIPS at 32MHz |
| STOP Mode Current | 230nA | 230nA | 230nA | 230nA |
주요 차별점
- Manufacturer-designated same-family replacement path (vs R5F100PJAFA#10)
- Substantial program and working memory (vs R5F100LEAFA#10)
- Low-power stop operation for duty-cycled equipment (vs R5F100FGAFP#10)
- Broad temperature range and package integration (vs R5F100PJAFA#X0)
설계 노트
Treat the 100-LQFP layout as a fine-pitch assembly task. Follow the land pattern and pin-1 orientation in the Renesas package drawing, route the programming interface for tool access, and preserve courtyard clearance for the component leads and clip. Because there is no exposed thermal pad on this package, heat removal depends primarily on copper connected to ground pins and through-board convection; route multiple ground pins to a low-impedance plane where the pin assignment permits.
Design the supply network for the 1.6V to 5.5V operating range and place local decoupling close to the device supply pins. Estimate the average and peak current from the 66µA/MHz CPU figure only as an initial CPU budget; add peripherals, I/O loading, flash activity, external pull networks, and communication circuits. Validate startup behavior at the minimum voltage and ensure the regulator has adequate transient response before relying on the on-chip resources for load switches or supervisory functions.
Separate sensitive measurement and communication routes from switching-node and high-current traces to reduce coupling into the microcontroller. Keep the on-chip oscillator and supporting components away from noisy power stages, maintain short return paths for ground pins, and use a continuous ground reference beneath signal routes. If the design needs a crystal, follow the manufacturer's recommended grounding and placement arrangement even though the MCU includes an internal oscillator.
Do not substitute an RL78 MCU solely because it uses a 100-LQFP package. Verify pin names, power pins, analog channels, timer functions, serial interfaces, interrupt sources, option bytes, and programming signals before replacing the R5F100PJAFA#30. Firmware that relies on register layouts, peripheral addresses, or safety behavior must also be checked. For the documented same-family transition to R5F100PJAFA#10, review the current Renesas ordering information for any suffix-specific qualification or delivery conditions.
Use the 100-pin package's distributed ground connections to lower die-to-board thermal resistance and maintain copper area around the device. A 100-LQFP package has a relatively large exposed footprint but no stated exposed thermal pad, so package-specific thermal data should guide the final copper and airflow design. Validate worst-case processor activity, ambient temperature, and nearby heat sources at the system level rather than assuming the operating-temperature range alone guarantees comfortable junction margin.
규정 준수 정보
The product listing identifies the device as RoHS compliant. No additional REACH, halogen-free, conflict-minerals, or automotive qualification declaration is stated.