R5F10PPGLFB#H5 - 32MHz 16-Bit Automotive MCU | Renesas
부품 번호: R5F10PPGLFB#H5 ✓ 활성R5F10PPGLFB#H5 개요
An automotive microcontroller is a semiconductor controller that executes embedded firmware, monitors sensors, controls actuators, and manages communication between electronic systems. The RL78/F14 series extends from the RL78 core into a low-power 16-bit platform designed for automotive electronics. This hierarchy places the R5F10PPGLFB#H5 in the MCU, embedded-controller, and automotive-electronics domains while combining application-specific communication and timing resources.
The R5F10PPGLFB#H5 provides a 128 KB flash memory area, a 32 MHz maximum clock, and a 16-bit CPU architecture. Its integrated CAN and LIN modules support vehicle-network communication, while specialized timer and comparator resources support motor-control and BLDC applications. The 100-pin LFQFP package provides enough peripheral connections for automotive body, chassis, and compact motor-control designs without relying on a large leaded package.
Renesas positions the RL78/F14 family for low-consumption automotive applications and identifies functional-safety features associated with BLDC motor control. The architecture is intended to combine control-loop responsiveness with efficient operation in systems where low standby consumption and deterministic peripheral behavior are important. The 32 MHz operating rate supports firmware execution and real-time control tasks while the 16-bit RL78 instruction set provides an efficient balance between processing capability and resource consumption.
Typical applications include automotive CAN and LIN nodes, BLDC motor controllers, actuator modules, body-control units, sensor interfaces, and compact electronic control units. The integrated communication modules reduce the need for separate interface devices, while the package pin count allows multiple timers, serial channels, and external sensors to be connected. In a motor-control design, timer outputs can generate drive waveforms and the comparator can support feedback protection when the circuit is configured for that function.
PCB implementation requires careful assignment of the 100 exposed package pins according to the manufacturer pin-description table. Decoupling should follow the datasheet recommendations, while unused inputs and outputs should be terminated according to the electrical-characteristics guidance. The 14 mm by 14 mm footprint also requires thermal review when the operating environment or switching losses are high.
This product page combines the exact R5F10PPGLFB#H5 identity with family-level electrical details, drop-in replacement analysis, package guidance, and application-oriented design notes. It helps engineers distinguish the H5 automotive ordering option from related RL78/F14 devices before beginning schematic capture, PCB layout, firmware planning, and sourcing.
드롭인 대체품: R5F10PPGLFB#H5 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
R5F10PPGLFB#X5
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
R5F10PGGLFB#H5
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
R5F10PLGLFB#H5
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
R5F10PPGLFB#H5 최대 정격 & 전기적 특성
| Product Type | 16-bit automotive microcontroller |
| Series | RL78/F14 |
| Maximum CPU Frequency | 32 MHz |
| CPU Word Length | 16 bit |
| Flash Memory | 128 KB |
| Program Memory Organization | 128K x 8 bit |
| 패키지 | 100-pin LFQFP |
| Package Body Size | 14 mm x 14 mm |
| 실장 유형 | Surface mount |
| CAN Interface | Integrated CAN module |
| LIN Interface | Integrated LIN module |
| Motor-Control Support | BLDC motor control supported |
| Comparator | Integrated comparator |
| Timer Resource | Timer RD supported |
R5F10PPGLFB#H5 14 mm x 14 mm 핀 구성 가이드
R5F10PPGLFB#H5(14 mm x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: R5F10PPGLFB#H5.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
R5F10PPGLFB#H5 적합 용도: 6 애플리케이션s: Automotive CAN Control Node, BLDC Motor Controller, LIN Body-Control Module, Automotive Sensor Interface, Actuator and Relay Control, Low-Power Automotive Sub-Controller.
Automotive CAN Control Node
The R5F10PPGLFB#H5 fits an automotive CAN control node that combines protocol handling, periodic sensing, and local actuator control in one 32 MHz microcontroller. Its integrated CAN module reduces the need for a separate communications controller, while the 128 KB flash area accommodates application firmware, diagnostics, and configuration data. The 100-pin LFQFP also provides access to multiple timers, serial interfaces, and I/O. Design the transceiver interface, reference clock, decoupling, and wake-up paths according to the Renesas manufacturer datasheet.
추천
BLDC Motor Controller
The R5F10PPGLFB#H5 is suited to compact BLDC motor-control modules because the RL78/F14 family supports timer RD, comparator resources, and automotive functional-safety-oriented functions. Its 16-bit core at up to 32 MHz provides control-loop execution capacity, while 128 KB of flash can hold motor algorithms, position tables, and diagnostic routines. The 100-pin LFQFP allows timer outputs, sensor inputs, communications, and protection signals to be routed on one controller board. Validate PWM timing, fault shutdown, current sensing, and thermal limits in the final motor-drive design.
추천
LIN Body-Control Module
The R5F10PPGLFB#H5 can serve as the central controller in a LIN-connected body module where switches, lamps, door positions, and environmental inputs must be monitored. Its integrated LIN module supports communication with distributed vehicle nodes, while the 32 MHz 16-bit processor handles debouncing, diagnostics, and application logic. The 128 KB flash capacity is useful for firmware revisions, configuration tables, and diagnostic routines. Use the manufacturer pin and electrical-characteristics documentation to assign the LIN interface, I/O, reset behavior, and clock requirements.
추천
Automotive Sensor Interface
The R5F10PPGLFB#H5 is appropriate for a sensor-hub or signal-conditioning module that gathers digital and analog automotive inputs, validates them, and reports results over CAN or LIN. Its 32 MHz execution rate supports responsive filtering and diagnostics, while the integrated communication modules create a direct path between sensing and vehicle networks. The 100-pin LFQFP provides sufficient external connections for multiple sensors, switches, and fault inputs. Confirm the exact ADC characteristics, comparator configuration, input thresholds, and required external components in the manufacturer datasheet.
추천
Actuator and Relay Control
The R5F10PPGLFB#H5 fits actuator-control electronics that must interpret inputs, apply diagnostic rules, and safely command relays, solenoids, or motor elements. The 16-bit RL78 architecture and 32 MHz clock support deterministic control and communication tasks, while the 128 KB flash area can retain state-machine code and lookup data. Its integrated CAN, LIN, timer, and comparator resources reduce external component count. The design should include output-driver protection, default-safe states, debouncing, and fault reporting based on the final load characteristics.
추천
Low-Power Automotive Sub-Controller
The R5F10PPGLFB#H5 is suitable for a low-power automotive sub-controller that periodically wakes to process sensor data and then returns to a low-consumption state. Renesas positions the RL78/F14 family around low power consumption, making it relevant to distributed modules where long inactive periods are common. The device combines 128 KB flash, integrated CAN and LIN, timers, and a comparator within a 100-pin LFQFP. Actual standby and active-current budgets must be calculated from the selected clock mode, peripheral state, and temperature condition in the manufacturer electrical characteristics.
추천
추천 제품 요약
엔지니어링 참조 데이터: R5F10PPGLFB#H5 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | R5F10PPGLFB#X5 | R5F10PGGLFB#H5 | R5F10PLGLFB#H5 |
|---|---|---|---|---|
| Manufacturer | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 100-LFQFP (14x14 mm) | 100-LFQFP (14x14 mm) | 100-LFQFP (14x14 mm) | 100-LFQFP (14x14 mm) |
| Series | RL78/F14 | RL78/F13/F14 | RL78/F14 | RL78/F14 |
| CPU Word Length | 16 bit | 16 bit | 16 bit | 16 bit |
| Ordering Suffix | H5 automotive option | X5 option | H5 option | H5 option |
| CAN Interface | Integrated CAN module | Integrated CAN module | Integrated CAN module | Integrated CAN module |
| LIN Interface | Integrated LIN module | Integrated LIN module | Integrated LIN module | Integrated LIN module |
| BLDC Motor-Control Support | Supported | Supported | Supported | Supported |
| Comparator | Integrated | Integrated | Integrated | Integrated |
| Timer Resource | Timer RD | Timer RD | Timer RD | Timer RD |
주요 차별점
- Automotive H5 ordering configuration (vs R5F10PPGLFB#X5)
- Larger confirmed flash option than the PL family branch (vs R5F10PLGLFB#H5)
- Automotive communication integration (vs R5F10PGGLFB#H5)
- Full 100-pin peripheral access (vs R5F10PPGLFB#X5)
설계 노트
Use the 100-pin LFQFP land pattern and pin table from the Renesas manufacturer datasheet when assigning signals. Place required decoupling capacitors adjacent to their associated supply pins, keep the high-current return path compact, and route communication interfaces away from switching nodes. Because the package is only 14 mm by 14 mm, verify pad clearance, solder mask dams, and assembly-capable trace widths with the PCB fabrication rules before layout release.
Do not treat R5F10PPGLFB#H5 as interchangeable with R5F10PPGLFB#X5 solely because both use the LFB package. Compare the ordering suffix, operating-temperature range, automotive qualification, flash organization, peripheral configuration, and lifecycle requirements. Likewise, confirm the PG and PL flash-density options before using them in an existing H5 design. A mechanical footprint match does not establish software, qualification, or electrical compatibility.
Establish the active and standby power budget from the Renesas electrical-characteristics table using the actual clock source, peripheral activity, temperature, and output load. The RL78/F14 family emphasizes low power consumption, but CAN, LIN, timers, comparator, and flash operation each affect system demand. Disable unused peripherals in firmware, select the required stop mode, and test wake-up timing because automotive body modules often combine long sleep intervals with strict communication-response requirements.
Keep the CAN and LIN routing controlled and provide the interface layout recommended by Renesas and the selected automotive transceiver. Match clock and trace geometry where the manufacturer application guidance specifies them, provide clean return paths, and isolate analog or sensor inputs from switching outputs. For BLDC motor control, keep PWM routing separated from sensitive feedback and place current-sense conditioning close to the controller-side analog input to reduce switching-node coupling.
The 100-LFQFP package provides substantial perimeter connectivity for automotive control systems, but its thermal performance depends on the PCB copper available beneath and around the device. Estimate junction temperature using the package thermal data, actual ambient temperature, switching activity, and PCB construction. Check that adjacent regulators, power drivers, and processors do not create a local hot area, and verify the assembly process against the package terminal and soldering requirements.
규정 준수 정보
Renesas identifies the H5 ordering option for automotive applications. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements require confirmation in the current manufacturer product or environmental-material documentation.