R5F10WLEGFB#30 - 24MHz 64KB LCD MCU | Renesas
부품 번호: R5F10WLEGFB#30 ✓ 활성R5F10WLEGFB#30 개요
A microcontroller is a compact embedded-computing device that combines a processor core, nonvolatile program memory, data memory, peripheral interfaces, and I/O in one integrated circuit. The RL78/L13 family emphasizes low-power operation and LCD-capable designs. Within the product hierarchy, this device is a 16-bit MCU, a microcontroller IC, a semiconductor, and a programmable embedded-control component.
The R5F10WLEGFB#30 provides three methods for generating the voltage required by segment LCD panels: external resistance division, capacitive split, and internal voltage boost. This selection allows a designer to balance display performance, component count, and power consumption according to the panel architecture. Its operating temperature range of -40°C to +105°C supports industrial environments where temperature robustness is important.
The 24 MHz operating speed gives the RL78/L13 core sufficient processing capability for control loops, user-interface management, sensor readings, and peripheral coordination. The 64 KB flash capacity provides on-chip program storage, reducing the need for external program memory in compact control systems. The 64-LFQFP package provides a clearly defined surface-mount footprint for automated assembly and PCB design.
Typical applications include home-appliance displays, measurement instruments, segment-LCD panel control, compact industrial panels, and low-power embedded products. The target device is particularly suitable when a product needs a dedicated segment LCD, broad temperature coverage, and a Renesas RL78/L13 control platform without relying on a high-cost external display controller.
Design the PCB using the manufacturer pin-assignment table, including all power, ground, programming, reset, and LCD connections. Confirm LCD bias, charge-pump, and segment-drive requirements against the selected panel before finalizing the external components. Because the package contains 64 leads, high-density routing and careful decoupling placement are essential for reliable assembly.
This page organizes the product identity, verified technical characteristics, application guidance, datasheet access, and replacement considerations for engineers evaluating the Renesas RL78/L13. It also distinguishes confirmed drop-in alternatives from unverified candidates, helping designers avoid assuming that similar flash size or clock rate alone guarantees PCB and firmware compatibility.
드롭인 대체품: R5F10WLEGFB#30 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청R5F10WLEGFB#30 최대 정격 & 전기적 특성
| Product Type | 16-bit low-power LCD microcontroller |
| Product Series | RL78/L13 |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K × 8 |
| CPU Word Width | 16 bit |
| Display Controller | Integrated segment LCD driver |
| LCD Voltage Generation Method 1 | External resistance division |
| LCD Voltage Generation Method 2 | Capacitive split |
| LCD Voltage Generation Method 3 | Internal voltage boost |
| 패키지 | 64-LFQFP, 10 × 10 mm |
| 핀 수 | 64 pins |
| 실장 유형 | Surface mount |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +105°C |
| Low-Power Consumption | Low-current operation |
| RoHS 상태 | RoHS |
R5F10WLEGFB#30 64-lfqfp, 10 × 10 mm 핀 구성 가이드
R5F10WLEGFB#30(64-lfqfp, 10 × 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: R5F10WLEGFB#30.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
R5F10WLEGFB#30 적합 용도: 6 애플리케이션s: Home Appliance Segment Displays, Measurement Device Displays, Industrial Control Panels, Battery-Powered Instruments, Temperature and Environmental Readouts, Compact Service Equipment.
Home Appliance Segment Displays
The R5F10WLEGFB#30 fits home appliances that combine a segment LCD with local sensing and control functions. Its 24 MHz 16-bit RL78/L13 core can supervise buttons, timers, temperature sensors, relays, and display updates, while 64 KB of flash provides room for application firmware and configuration data. The integrated segment LCD driver supports external resistance division, capacitive split, or internal voltage boost, allowing the display-bias method to match panel requirements. Its -40°C to +105°C rating is useful in kitchen equipment, washing machines, and other appliances that may experience wide ambient-temperature changes.
추천
Measurement Device Displays
The R5F10WLEGFB#30 is well matched to portable measurement instruments that present readings through a segment LCD. The 24 MHz processing speed supports responsive acquisition, filtering, and user-interface logic, while 64 KB flash accommodates firmware, calibration tables, and display formatting. Three LCD voltage-generation options give designers flexibility when matching a panel and minimizing display-related circuitry. The -40°C to +105°C operating range is advantageous for industrial meters and laboratory equipment, although sensor accuracy, reference quality, calibration storage, and interface timing must be designed separately.
추천
Industrial Control Panels
R5F10WLEGFB#30 can serve as the local controller in compact industrial equipment that needs a display, digital inputs, and actuator outputs. Its 24 MHz 16-bit core provides timing margin for control loops and communication tasks, and 64 KB flash avoids a mandatory external program-memory device in moderate applications. The segment LCD driver simplifies direct panel control, while the wide -40°C to +105°C range supports harsh ambient conditions. Engineers should still verify output-drive limits, isolation requirements, ESD protection, grounding, and communication peripheral availability against the complete peripheral specification.
추천
Battery-Powered Instruments
The R5F10WLEGFB#30 is suitable for battery-powered instruments where display operation and standby consumption are important system concerns. Renesas identifies the RL78/L13 as a low-power microcontroller with an integrated segment LCD driver, and the device offers three bias-generation methods for adapting to different panel architectures. The 24 MHz core allows useful processing capability without requiring a high-performance external processor. Power-budget calculations should include MCU active and sleep current, LCD segment drive, pull networks, sensor circuitry, and regulator efficiency; select the display method that produces the best balance of readability and current consumption.
추천
Temperature and Environmental Readouts
R5F10WLEGFB#30 can present temperature, humidity, pressure, or other environmental measurements on a segment LCD. Its 24 MHz core provides enough instruction throughput to combine sensor acquisition, conversion sequencing, filtering, threshold logic, and display updates. The integrated LCD driver reduces the need for a separate display controller, and the available voltage-generation methods support different panel architectures. For accurate environmental products, keep analog sensor paths away from switching and LCD-drive circuitry, follow recommended grounding and decoupling layouts, and verify that the selected LCD and measurement circuits remain stable across the intended operating range.
추천
Compact Service Equipment
The R5F10WLEGFB#30 fits compact service and diagnostic equipment that needs a local status display without a large graphical interface. A segment panel can show mode, error codes, counters, measurements, and service parameters using the MCU's integrated LCD driver. The 24 MHz 16-bit core and 64 KB flash balance processing performance with program-storage requirements, while the -40°C to +105°C range supports varied installation environments. Design the display for fast human-readable updates, keep keypad scanning deterministic, and use the manufacturer's low-power modes when the product spends long periods in standby.
추천
추천 제품 요약
엔지니어링 참조 데이터: R5F10WLEGFB#30 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | Renesas Electronics |
| Package | 64-LFQFP, 10 × 10 mm |
| CPU Architecture | 16-bit RL78/L13 |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K × 8 |
| LCD Controller | Integrated segment LCD driver |
| LCD Voltage Generation | External resistance division, capacitive split, or internal voltage boost |
| Operating Temperature | -40°C to +105°C |
| Mounting Type | Surface mount |
주요 차별점
- Broad selection of LCD bias-generation architectures (vs Generic 64-LFQFP 16-bit MCU)
- High operating temperature coverage (vs Commercial-temperature RL78/L13 variant)
- Integrated flash and segment display control (vs Discrete-display-controller design)
설계 노트
Route the 64-LFQFP footprint directly from the Renesas package drawing and preserve the recommended pin-1 orientation, land pattern, and solder-mask geometry. Place input and decoupling capacitors at their associated power pins with short return paths. Avoid routing display or high-current output traces beneath the MCU unless the layout guidance explicitly permits it, because long shared current paths can increase supply noise and reduce logic margin.
Use the manufacturer LCD reference configuration for the selected segment panel. Confirm whether the panel requires external resistance division, capacitive split, or internal voltage boost, and size associated resistors, capacitors, and charge-pump parts accordingly. Keep LCD-drive and sensitive analog traces separated, minimize loop area around bias-generation components, and connect ground returns using a low-impedance plane that supports both display and core current.
Do not substitute an MCU merely because it has a 64-LFQFP package, 24 MHz clock, and 64 KB flash. Validate every lead against the R5F10WLEGFB#30 pin table, including power, ground, LCD outputs, programming signals, reset, and peripheral functions. Also check startup behavior, memory mapping, interrupt vectors, and clock configuration because these can differ even when headline capacity and frequency values appear similar.
Calculate the complete system power budget across MCU active mode, low-power states, LCD drive, external sensors, communications, and regulator losses. The exact active and standby currents must be taken from the manufacturer electrical-characteristics table for the selected clock and LCD conditions. This prevents an assessment based only on the device's low-power description and helps identify whether additional regulator headroom or a more efficient display-bias method is required.
규정 준수 정보
The commercial listing identifies the exact device as RoHS-compliant. Confirm remaining declarations against current Renesas product documentation.