S25FL064P0XMFB003 - 64-Mbit Quad SPI NOR | Infineon
부품 번호: S25FL064P0XMFB003 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0.1057 | $0.11 |
| 10 | $0.1057 | $1.06 |
| 100 | $0.1057 | $10.57 |
| 500 | $0.1057 | $52.85 |
| 1,000 | $0.1057 | $105.70 |
S25FL064P0XMFB003 개요
A serial NOR flash memory is a nonvolatile semiconductor memory device that retains stored data when power is removed. Unlike EEPROM, this device is optimized for repeated read operations and provides a compact SPI interface with optional four-lane data transfer. Its place in the memory hierarchy is below external storage such as NAND flash or disks, while its electrical density, random-access behavior, and low-latency read interface make it suitable for firmware and code execution from external flash.
The S25FL064P0XMFB003 combines a 64-Mbit capacity with a 3.0 V operating class, 64-kB sector organization, and 256-byte page size. The datasheet information identifies four-kB sub-sectors within the top or bottom sectors, which can support finer selective erase workflows. Its Quad I/O interface increases transfer bandwidth compared with a single-data-line SPI connection, provided the host controller, PCB routing, and firmware support the corresponding command set.
Typical applications include automotive embedded controllers, industrial equipment, consumer electronics, network appliances, and systems requiring durable nonvolatile storage for firmware, calibration data, logs, or asset records. The device can be used for code and data storage when the host processor lacks sufficient internal flash, and its sector structure allows updates at useful erase granularity rather than rewriting an entire device.
Designers should verify supply voltage, command compatibility, timing, and erase endurance against the host requirements before committing a layout. The supplied data identifies the S25FL064P family as retired and recommends S25FL064L as the factory migration path, so new production designs should evaluate that superseding family before using this older device.
드롭인 대체품: S25FL064P0XMFB003 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
S25FL064P0XMFA003
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
S25FL064P0XNFI003
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
S25FL064P0XMFB003 최대 정격 & 전기적 특성
| 메모리 유형 | Serial NOR Flash Memory |
| Memory Density | 64 Mbit |
| Operating Voltage | 3.0 V to 3.6 V |
| 인터페이스 | SPI with Quad I/O |
| 최대 클록 주파수 | 104 MHz |
| Quad I/O Maximum Frequency | 80 MHz |
| Sector Organization | 128 uniform 64-kB sectors |
| Page Size | 256 bytes |
| Sub-sector Size | 4 kB |
| Erase Endurance | 100,000 cycles |
| Process Technology | 90 nm MirrorBit |
| 패키지 | 16-SOIC |
| 핀 수 | 16 pins |
| Data Input | SI (Serial Input) |
| Data Output | SO (Serial Output) |
| Read and Write Voltage | 3.0 V to 3.6 V |
| Single Power Supply Operation | Supported |
| Lifecycle Recommendation | S25FL064L supersedes S25FL064P |
S25FL064P0XMFB003 16-soic 핀 구성 가이드
S25FL064P0XMFB003(16-soic 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: S25FL064P0XMFB003.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
S25FL064P0XMFB003 적합 용도: 6 애플리케이션s: Automotive Embedded Firmware Storage, Industrial Controller Configuration Storage, Consumer Device Firmware Update, Network Appliance Boot and Asset Storage, Security and Access-Control Data Storage, Instrumentation and Measurement Embedded Systems.
Automotive Embedded Firmware Storage
The S25FL064P0XMFB003 is suitable for legacy automotive embedded platforms that need nonvolatile firmware storage beside a host controller. Its 64-Mbit density, 64-kB erase sectors, 256-byte page organization, and 100,000-cycle endurance provide a practical structure for controlled code updates. The device should be paired with a host SPI controller that supports the required command set and timing. Because the supplied distributor listing mentions automotive, AEC-Q100, and FL-P associations, qualification documentation for the exact orderable part must still be confirmed before production use.
추천
Industrial Controller Configuration Storage
Use the S25FL064P0XMFB003 in an industrial controller when calibration constants, serial records, diagnostic flags, and configuration data must survive power loss. Its 128 uniform 64-kB sectors permit organized erase blocks, while the 4-kB sub-sectors in the top or bottom sector provide finer update granularity where the device command set allows it. The 3.0 V to 3.6 V supply range simplifies integration with compatible embedded logic, but designers must validate timing, reset behavior, write protection, and power-fail recovery.
추천
Consumer Device Firmware Update
The device can retain firmware and update metadata in a consumer product whose main controller lacks sufficient internal memory. SPI read access supports code execution from external NOR flash, while Quad I/O can increase transfer bandwidth when the controller and PCB support four-lane signaling. A robust update routine should verify erased regions before programming, protect critical boot sectors, and retain a valid recovery image during power loss. The retired-family status means new consumer products should generally use the recommended S25FL064L migration path.
추천
Network Appliance Boot and Asset Storage
S25FL064P0XMFB003 can serve as a compact nonvolatile storage element in a network appliance for boot code, configuration snapshots, device identity, and operational records. Its NOR architecture favors random reads and repeated access patterns, while the 64-Mbit capacity is sufficient for moderate firmware and data partitions. The design must account for sector wear if counters or logs are updated frequently, and it should use a power-fail-safe update journal so interrupted programming does not destroy the only valid configuration.
추천
Security and Access-Control Data Storage
The memory can hold device certificates, key-related metadata, access-control records, or audit events in systems where nonvolatile integrity is important. Its sector-level erase architecture allows a designer to isolate frequently updated audit data from protected boot regions, subject to the exact command and protection behavior documented by the manufacturer. Encryption and authentication remain host responsibilities; flash endurance and program/erase latency should be considered when records are written frequently. Use read locks or equivalent protection features only after verifying their exact support in the device documentation.
추천
Instrumentation and Measurement Embedded Systems
The S25FL064P0XMFB003 is suitable for embedded instrumentation that stores firmware, calibration tables, event logs, and operating parameters. Its fast serial read path helps the host controller execute or inspect code efficiently, while the 3.0 V operating class can fit systems designed around compatible low-voltage logic. For long product lifetimes, engineers should evaluate the retired-family status and the endurance budget for frequently changed calibration areas. Layout should minimize coupling between flash signals and sensitive analog or high-current power sections.
추천
엔지니어링 참조 데이터: S25FL064P0XMFB003 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | S25FL064P0XMFA003 | S25FL064P0XNFI003 |
|---|---|---|---|
| Memory Type | Serial NOR Flash Memory | Quad SPI flash | SPI/Quad I/O flash |
| Memory Density | 64 Mbit | 64 Mbit | 64 Mbit |
| Package | 16-SOIC | 16-SOIC | 8-WSON (6x8) |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
주요 차별점
- Manufacturer-recommended migration direction (vs S25FL064L)
- Legacy density and interface alignment (vs S25FL064P0XMFA003)
- Established documented endurance (vs S25FL064P0XNFI003)
설계 노트
Route SPI and Quad I/O signals from the host controller to the flash with short, controlled traces and a continuous ground reference. Keep the memory close to the controller, avoid unnecessary stubs, and maintain the voltage and timing limits defined by the manufacturer datasheet. Because Quad I/O uses multiple data lines, inspect signal integrity across all four lanes rather than assuming the single SI/SO path is representative.
Provide a stable 3.0 V to 3.6 V supply within the device specifications and place local bypass capacitance close to the flash power and ground pins. Validate startup, reset, and power-fail behavior in the host system. Program and erase operations can temporarily alter the supply current and bus activity, so power sequencing and decoupling should be verified on hardware rather than inferred only from the nominal interface rating.
Do not confuse the 104 MHz distributor listing with a universal 104 MHz Quad I/O limit; the supplied manufacturer information states Quad I/O operation up to 80 MHz. Also confirm the exact package before ordering, since one related MPN is listed in an 8-WSON package rather than the target 16-SOIC package. The target family is retired, so production planning should include S25FL064L migration review and legacy-stock risk assessment.
규정 준수 정보
The supplied search results mention automotive and AEC-Q100 associations for an FL-P listing, but they do not provide a complete compliance declaration for the exact orderable MPN. Compliance fields remain unknown rather than inferred.
