SI2401-FS - 2400bps V.22bis ISOMODEM | Silicon Labs
부품 번호: SI2401-FS ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.6067 | $2.61 |
| 10 | $2.6067 | $26.07 |
| 100 | $2.6067 | $260.67 |
| 500 | $2.6067 | $1,303.35 |
| 1,000 | $2.6067 | $2,606.70 |
SI2401-FS 개요
An ISOmodem is a modem integrated circuit that combines data modulation, telephone-line signaling, and an analog direct access arrangement. By integrating the DAA, the SI2401-FS reduces the number of external line-interface components while providing programmable country-specific telephone-line behavior. The verified source material identifies the device as a V.22bis ISOmodem with low-cost DAA and describes globally programmable telephone-line functionality.
Key supported rates include 2400 bps V.22bis, 1200 bps V.22, 1200 bps V.23, 1200 bps Bell 212A, 300 bps V.21, and 300 bps Bell 103. Fast connect and V.23 reversing are also identified. The source material additionally lists SIA and other security protocols and over 6000 V capacitive isolation, although exact test conditions and certification details are not available in the supplied data.
Technically, the SI2401-FS combines a modem data path with a telephone-line interface rather than operating as a conventional standalone analog modem. Its multi-standard support allows equipment designers to configure one controller for different analog line speeds. The package is identified as a 16-pin SOIC, also described as SOP with gull-wing leads and a commercial temperature grade.
Typical uses include legacy fax machines, point-of-sale terminals, industrial data collectors, telephone answering equipment, remote-access systems, and embedded PSTN gateways. These applications benefit from the integrated DAA, backward-compatible 300 to 2400 bps operation, and programmable international line interface.
Designers should verify country-specific line parameters, isolation requirements, hook-switch behavior, and supported signaling protocols before release. Because the SI2401-FS is a mature legacy interface, current lifecycle and availability should be reconfirmed before new production commitments. LCSC lists the SI2401-FS as in stock with pricing from $2.6067 as of 2026-10-23.
드롭인 대체품: SI2401-FS — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청SI2401-FS 사양
| Product Type | 2400 bps V.22bis ISOmodem with low-cost DAA |
| Maximum Data Rate | 2400 bps |
| V.22bis Rate | 2400 bps |
| V.22 Rate | 1200 bps |
| V.23 Rate | 1200 bps |
| Bell 212A Rate | 1200 bps |
| V.21 Rate | 300 bps |
| Bell 103 Rate | 300 bps |
| Telephone Interface | Integrated programmable DAA |
| Capacitive Isolation | Over 6000 V |
| Connection Feature | Fast connect |
| V.23 Feature | V.23 reversing |
| Protocol Feature | SIA and other security protocols |
| 패키지 | 16-SOIC |
| Terminal Count | 16 terminals |
| Lead Form | Gull wing |
| Temperature Grade | Commercial |
| 실장 유형 | Surface mount |
SI2401-FS 16-soic 핀 구성 가이드
SI2401-FS(16-soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: SI2401-FS.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
SI2401-FS 적합 용도: 6 애플리케이션s: Legacy Fax and Data Equipment, Industrial Telephone Data Collection, Point-of-Sale Terminal, Remote Monitoring and Telemetry, Telephone Answering and Voice Access Equipment, Instrumentation with Legacy Modem Output.
Legacy Fax and Data Equipment
The SI2401-FS fits legacy fax and synchronous data terminals that must communicate over analog PSTN lines at 300, 1200, or 2400 bps. According to the manufacturer datasheet, its V.22bis, V.22, V.23, V.21, and Bell modem support covers common legacy rates, while the integrated low-cost DAA reduces the external telephone-interface component count. The design should validate country-specific line settings, ring detection, and hook-switch behavior. The principal benefit is reuse of an established 16-SOIC modem architecture; the limitation is that 2400 bps is far below modern broadband data rates and may be blocked by current carriers.
추천
Industrial Telephone Data Collection
The SI2401-FS is applicable to industrial telemetry terminals that collect data through an analog telephone line. Its 2400 bps V.22bis mode offers a practical ceiling for low-volume status, alarm, and configuration traffic, while V.21 and Bell 103 fallback modes can improve compatibility with older endpoints. The integrated programmable DAA is useful where products must support multiple national line networks without a large external analog network. Engineers should still budget for isolation, line protection, and country-specific approvals. Compared with Ethernet or cellular hardware, the SI2401-FS is appropriate only where copper PSTN access remains available and low bandwidth is acceptable.
추천
Point-of-Sale Terminal
The SI2401-FS can support a legacy point-of-sale terminal that performs dial-out transactions through an analog telephone network. V.22bis provides the highest verified data rate of 2400 bps, and the lower Bell and V-series modes allow fallback during degraded connections. Its integrated DAA can shorten the analog line-interface design compared with a discrete modem arrangement. The implementation must include correct off-hook and line-state handling and must be tested across the intended telephone networks. This is most appropriate for installed or long-life equipment where PSTN service is contractually available; new retail deployments normally favor Ethernet or cellular connectivity.
추천
Remote Monitoring and Telemetry
The SI2401-FS supports legacy remote-monitoring installations that periodically transmit alarms and readings over analog telephone lines. The selectable 300 bps and 1200 bps modes can improve robustness on marginal connections, while the 2400 bps V.22bis mode reduces transfer time when line quality permits. Its programmable DAA is particularly relevant to equipment intended for multiple countries. System designers should use the datasheet to verify line-voltage, ring, and hook-switch requirements and should isolate the telephone network from low-voltage logic. The SI2401-FS is a bridge to installed PSTN infrastructure, not a replacement for modern low-power cellular modules.
추천
Telephone Answering and Voice Access Equipment
The SI2401-FS can provide the data-modem path in older telephone answering, remote-access, or dual-function terminal designs that combine voice-line handling with low-speed data communication. Its integrated direct access arrangement shares the telephone-line interface, and V.21 or Bell 103 fallback supports older infrastructure. The design must account for simultaneous voice and data behavior, ring detection, and line-state inputs; exact implementation details require the complete manufacturer datasheet. Because this IC is a 2400 bps-class legacy interface, it offers limited throughput compared with V.34 or broadband solutions, but it can be economical for long-lived equipment.
추천
Instrumentation with Legacy Modem Output
The SI2401-FS fits older laboratory or field instruments that must export measurements through a 300 to 2400 bps telephone modem. The multiple Bell and V-series standards increase the chance of communicating with legacy test systems, and the integrated DAA simplifies the line-side implementation. Instrument designers should reserve enough I/O for modem status, ring, and hook control and verify that analog isolation meets the target telephone-network requirements. This approach remains useful for installed equipment, but modern instruments typically offer Ethernet, USB, or wireless interfaces for higher throughput and simpler site deployment.
추천
추천 제품 요약
엔지니어링 참조 데이터: SI2401-FS — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
설계 노트
Do not treat related SI2401 family members as drop-in replacements without checking the complete pinout and electrical tables. The supplied search results call SI2401-FSR and SI2404-D-FS or SI2404-D-FSR functional equivalents, but they provide no verified pin mapping. Confirm package, pin names, supply voltage, interface timing, and DAA behavior directly from each candidate datasheet before revising a PCB.
Preserve the manufacturer reference-layout guidance for the integrated DAA and telephone-line nodes. Keep the line-side section physically separated from low-level logic, use the shortest practical isolation path, and avoid routing sensitive analog or digital signals beneath isolation and line-interface components. Although the exact PCB stack-up and creepage requirements are unavailable in the supplied excerpts, national telephone-network and safety rules must govern final spacing.
Validate the telephone-line interface and logic supplies across off-hook, on-hook, ring, and fault states before production. The source excerpts confirm an integrated DAA and over 6000 V capacitive isolation but do not provide supply voltage, current, or regulator recommendations, so those values must come from the full manufacturer datasheet. Do not infer that the isolation rating is a complete substitute for application-level surge protection.
Confirm the exact country approvals and operating line parameters for the finished product. The supplied material mentions FCC, China, JATE, and other protocols, but it does not provide certificate identifiers or current status. A modem IC compliance statement does not automatically qualify the complete telephone terminal, so obtain the applicable approval requirements for every country where the equipment will be sold.
규정 준수 정보
The supplied SI2401-FS material references FCC, China, JATE, and other protocols, but it does not provide verified RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for this exact MPN.