SN74AHC1G00DBVR - 2-5.5V Single 2-Input NAND Gate | Texas Instruments
부품 번호: SN74AHC1G00DBVR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0.29 | $0.29 |
| 10 | $0.22 | $2.20 |
| 100 | $0.14 | $14.00 |
| 500 | $0.1 | $50.00 |
| 1,000 | $0.07 | $70.00 |
SN74AHC1G00DBVR 개요
A NAND gate is a fundamental digital logic gate that outputs LOW only when all inputs are HIGH. It is a universal gate, meaning any other logic function (AND, OR, NOT, XOR) can be built from NAND gates alone. The SN74AHC1G00 belongs to the AHC (Advanced High-Speed CMOS) logic family, which balances speed and power for battery-powered and portable systems within the broader CMOS logic IC hierarchy.
Key features include a wide 2-V to 5.5-V operating range, a maximum propagation delay of 6.5 ns at 5 V, and maximum quiescent supply current of only 10 uA. Schmitt-trigger action on all inputs provides hysteresis-based noise immunity, allowing slow input edges without false triggering and eliminating external conditioning components. The device delivers ±8 mA output drive at 5 V, compatible with standard CMOS and TTL logic levels.
Fabricated in advanced CMOS technology, the SN74AHC1G00 combines high-speed switching with low static and dynamic power dissipation. Robustness features include latch-up performance exceeding 250 mA per JESD 17 and ESD protection exceeding 2000-V HBM, 200-V MM, and 1000-V CDM ratings per the TI datasheet.
Typical applications include signal gating, logic inversion, clock gating, and interface buffering in consumer electronics, industrial control, and automotive subsystems. The small SOT-23-5 footprint suits wearables, IoT modules, and dense PCBs where board area is at a premium.
Design tip: do not let input voltages exceed VCC, and decouple the VCC pin with a 0.1-uF ceramic capacitor for best noise performance. Pricing shown reflects distributor data as of 2026-08-29.
드롭인 대체품: SN74AHC1G00DBVR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: SN74AHC1G00DBVR (동일 폼 팩터 및 풋프린트) — 차이점: Logic Family, Package, Operating Temperature, Supply Voltage (VCC), Input Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
SN74LVC1G00DBVR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SN74AHC1G86DBVR
⚡ 동일 패키지📋 참조 대체품 (카탈로그에 없음)
NC7SZ00M5X
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$0.07 / 개
데이터시트 보기 →NC7S00M5X
✅ 드롭인✓ 재고 있음
$0.1 / 개
데이터시트 보기 →74LVC1G00GW
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$0.035 / 개
데이터시트 보기 →74VHC1G00
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
SN74AHC1G00DBVR 최대 정격 & 전기적 특성
| Logic Function | 2-Input Positive-NAND Gate |
| Supply Voltage Range | 2 V to 5.5 V |
| Max Propagation Delay | 6.5 ns at 5 V |
| Quiescent Current (Max ICC) | 10 uA |
| Output Drive | ±8 mA at 5 V |
| Input Type | Schmitt Trigger (all inputs) |
| Latch-Up Performance | Exceeds 250 mA per JESD 17 |
| ESD Protection HBM | Exceeds 2000 V |
| ESD Protection MM | Exceeds 200 V |
| ESD Protection CDM | Exceeds 1000 V |
| Logic Family | AHC (Advanced High-Speed CMOS) |
| 패키지 | SOT-23-5 (DBV) |
| 실장 유형 | Surface Mount |
| Number of Channels | 1 |
| RoHS 상태 | Compliant |
SN74AHC1G00DBVR 핀 구성
| 핀 1 | A — Input A |
| 핀 2 | GND — Ground |
| 핀 3 | B — Input B |
| 핀 4 | Y — Output (Y = NOT(A AND B) in positive logic) |
| 핀 5 | VCC — Power supply, 2 V to 5.5 V |
일반적인 애플리케이션
SN74AHC1G00DBVR 적합 용도: 6 애플리케이션s: Signal Gating in Industrial Control, IoT and Wearable Modules, Clock Gating and Power Management, Automotive Subsystems (5-V Logic Glue), Logic Level Combination in Consumer Electronics, Test and Measurement Interface Boards.
Signal Gating in Industrial Control
In industrial control boards, the SN74AHC1G00 gates sensor enable lines and interlock signals where noise immunity is critical. The Schmitt-trigger inputs tolerate slow edges from optocouplers and RC-filtered sensor outputs without false switching, while the 2-5.5 V range supports both legacy 5-V and 3.3-V PLC logic rails. The ±8 mA output drive at 5 V can directly drive LED indicators or optocoupler inputs, and the 10 uA max quiescent current keeps standby power low in always-on monitoring equipment.
추천
IoT and Wearable Modules
Battery-powered IoT nodes and wearables benefit from the SN74AHC1G00's 10 uA maximum ICC and tiny SOT-23-5 footprint of roughly 2.9 x 2.8 mm. It handles wake-up logic, button debouncing assisted by Schmitt inputs, and power-rail gating between the MCU and sensors. The 2 V minimum supply supports operation from a discharged lithium cell through a regulator down to 2.5 V, and the 6.5 ns propagation delay keeps wake latency negligible. Single-gate packaging minimizes board area in dense sensor-module layouts.
추천
Clock Gating and Power Management
The SN74AHC1G00 is widely used to gate clocks to peripherals in power-sensitive systems: one input carries the clock, the other an enable signal, so Y goes HIGH (clock disabled) whenever the enable is LOW. The 6.5 ns max tpd at 5 V limits added clock skew, and Schmitt-trigger inputs clean up slowly ramping enable signals from supervisor ICs or RC power-on circuits. Low dynamic power in the AHC CMOS process keeps gated-clock dissipation negligible compared with the peripheral being switched off.
추천
Automotive Subsystems (5-V Logic Glue)
In non-safety automotive modules such as body controllers and sensor hubs, the SN74AHC1G00 provides 5-V glue logic with robust ESD protection exceeding 2000-V HBM and latch-up performance above 250 mA per JESD 17. It gates fault signals, inverts sensor polarities, and combines enable conditions for actuators. For new automotive designs requiring AEC-Q100 qualification, TI offers qualified single-gate logic such as the SN74LVC1G17QDBVRQ1 family within the same small-package ecosystem.
추천
Logic Level Combination in Consumer Electronics
Consumer products such as set-top boxes, appliances, and audio accessories use the SN74AHC1G00 to combine push-button, IR-receiver, and microcontroller outputs into a single control signal. Schmitt-trigger inputs accept slow RC-filtered button signals directly, eliminating debounce comparators. The 3.3-V operation matches typical MCU GPIO levels, while the ±8 mA drive can blink a status LED. Its low cost (well under $0.10 in volume as of 2026-08-29) makes single-gate glue logic a trivial BOM addition.
추천
Test and Measurement Interface Boards
On test-fixture and instrumentation interface boards, the SN74AHC1G00 combines trigger and arm signals, inverts polarity of instrument outputs, and gates counter/timer inputs. The 6.5 ns max propagation delay at 5 V preserves trigger timing accuracy, and the 2000-V HBM ESD rating helps survive connector-transient exposure during fixture handling. Schmitt-trigger inputs condition slowly rising trigger signals from phototransistor or comparator outputs, ensuring one clean output edge per trigger event on dense patch-panel designs.
추천
추천 제품 요약
엔지니어링 참조 데이터: SN74AHC1G00DBVR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | SN74LVC1G00DBVR | NC7SZ00M5X | 74LVC1G00GW |
|---|---|---|---|---|
| Package | SOT-23-5 (DBV) | SOT-23-5 (DBV) - same | SOT-23-5 - same | SOT-23-5 - same |
| Brand | Texas Instruments | Texas Instruments | onsemi | Nexperia |
| Supply Voltage Range | 2 V to 5.5 V | 1.65 V to 5.5 V | 1.65 V to 5.5 V | 1.65 V to 5.5 V |
| Logic Function | 2-Input NAND | 2-Input NAND | 2-Input NAND | 2-Input NAND |
| Schmitt Trigger Inputs | Yes | No | No | No |
주요 차별점
- Schmitt-trigger inputs on all inputs (vs SN74LVC1G00DBVR)
- Wide 2-5.5 V supply range (vs NC7SZ00M5X)
- Robust ESD and latch-up ratings (vs 74LVC1G00GW)
설계 노트
Decouple the VCC pin with a 0.1-uF ceramic capacitor placed within 2 mm of pin 5. During output transitions the CMOS stage draws dynamic shoot-through current; without local decoupling this creates supply bounce that can couple into nearby analog circuitry. The 10 uA static ICC is negligible, but dynamic power scales as C x V^2 x f, so at 5 V and high toggle rates keep trace capacitance low.
Never let an input voltage exceed VCC - the AHC input structure lacks the overvoltage tolerance of the LVC family, and inputs above VCC can forward-bias protection structures and cause latch-up. When translating from a 5-V domain into a 3.3-V-supplied gate, use a level translator such as the SN74LVC1T45DCKR instead of direct connection.
Exploit the Schmitt-trigger inputs: slow edges from optocouplers, RC power-on circuits, or long cables can connect directly without a separate buffer. However, keep PCB traces between a Schmitt input and its source short when in a noisy environment - hysteresis rejects slow noise, not high-frequency ringing near the threshold. Terminate long lines and add a small series resistor (22-33 ohm) at output Y when driving heavy capacitive loads.
규정 준수 정보
RoHS compliant per TI product page. AEC-Q100 qualification not indicated for this standard part; see TI Q1 single-gate logic for automotive-qualified options.
