Texas Instruments

SN74HC245N - 8-Bit 3-State Bus Transceiver | Texas Instruments

부품 번호: SN74HC245N ✓ 활성
2 V to 6 V Vdss 80 µA Id 20-pin PDIP Package
MOQ: 1 |

SN74HC245N 개요

The Texas Instruments SN74HC245N is an 8-bit non-inverting bus transceiver with 3-state outputs, a 6 V supply rating, and a 20-pin PDIP package. It supports asynchronous two-way communication between two eight-bit buses and can drive 15 LSTTL loads while operating from a single 2 V to 6 V supply. Its maximum specified quiescent supply current is 80 µA.

A bus transceiver is a digital logic device that connects two buses while controlling signal direction and output impedance. The SN74HC245 belongs to the 74HC high-speed CMOS logic family, which operates at voltages compatible with both CMOS and low-power Schottky TTL systems. Its non-inverting data paths preserve logic polarity, while the three-state outputs can be disabled to create high-impedance bus segments for shared-bus applications.

Key features include eight independently controlled data channels, one common direction-control input, and one common output-enable input. The direction input determines whether data travels from the A bus to the B bus or in the reverse direction. When the output-enable input is active, all eight outputs are disabled simultaneously, allowing several transceivers to share a bus without contention. The high-current output stage can drive 15 LSTTL loads directly.

The SN74HC245N uses CMOS-compatible inputs and three-state outputs to support bus interface designs in industrial control, instrumentation, computer peripherals, and embedded systems. Its control-function implementation reduces external timing requirements during asynchronous communication. Because all eight channels share direction and enable control, the device is especially useful where an entire byte must change direction or be removed from a multidrop bus as a group.

Typical applications include isolating processor and peripheral buses, buffering data between circuit modules, implementing bidirectional parallel interfaces, and adding controlled impedance to shared backplanes. The same transceiver concept is also used in bus repeaters, test equipment, data acquisition systems, and legacy parallel-port interfaces. The 20-pin PDIP package supports through-hole assembly and easy prototyping.

When laying out a circuit, keep the direction and output-enable traces away from high-current or switching-node paths, and treat all unused inputs as required to be driven to a valid logic level. Decoupling should follow the manufacturer datasheet recommendations, with the supply capacitor placed close to the IC. Validate bus contention, signal timing, and level compatibility before substituting a device from another HC family.

This page combines the manufacturer device description, package details, operating characteristics, practical bus-interface guidance, and verified cross-reference information to support design selection. The alternatives and comparison sections focus on pin-compatible devices rather than functionally similar components that would require PCB changes.

드롭인 대체품: SN74HC245N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: SN74HC245N (동일 폼 팩터 및 풋프린트) — 차이점: Data Direction, Direction Control, Output Enable, Output State, Product Type.

Toshiba
Data Direction: Bidirectional, selectable by DIR
Direction Control: DIR input
Output Enable: Active-low OE control
비교 대상: SN74HC245N →

74HC245N

✅ 드롭인
📦 PDIP-20
Same 8-bit three-state bus-transceiver function and 20-pin PDIP outline; manufacturer-specific timing and electrical limits require comparison before substitution.

📋 참조 대체품 (카탈로그에 없음)

SN74HC245N 최대 정격 & 전기적 특성

Product Type 8-bit non-inverting bus transceiver
Number of Data Channels 8 channels
Data Direction Bidirectional
Output State 3-state
Supply Voltage Range 2 V to 6 V
Maximum Supply Voltage 6 V
Maximum Quiescent Supply Current 80 µA
Output Drive Capability 15 LSTTL loads
Logic Family 74HC high-speed CMOS
Input Compatibility CMOS and LSTTL compatible
Direction Control 1 common DIR input
Output Enable 1 common OE input
Package Type 20-pin PDIP
장착 스타일 Through-hole

SN74HC245N 핀 구성

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
핀 1 DIR — Direction-control input
핀 2 1B — B-side data input or output for channel 1
핀 3 2B — B-side data input or output for channel 2
핀 4 3B — B-side data input or output for channel 3
핀 5 4B — B-side data input or output for channel 4
핀 6 5B — B-side data input or output for channel 5
핀 7 6B — B-side data input or output for channel 6
핀 8 7B — B-side data input or output for channel 7
핀 9 GND — Ground reference
핀 10 OE — Active-low output-enable input
핀 11 1A — A-side data input or output for channel 1
핀 12 2A — A-side data input or output for channel 2
핀 13 3A — A-side data input or output for channel 3
핀 14 4A — A-side data input or output for channel 4
핀 15 5A — A-side data input or output for channel 5
핀 16 6A — A-side data input or output for channel 6
핀 17 7A — A-side data input or output for channel 7
핀 18 8B — B-side data input or output for channel 8
핀 19 VCC — Positive supply voltage
핀 20 8A — A-side data input or output for channel 8

일반적인 애플리케이션

SN74HC245N 적합 용도: 6 애플리케이션s: Bidirectional Instrument Bus, Embedded Processor Bus Isolation, Data Acquisition Backplane, Computer Peripheral Interface, Industrial Control Module, Test and Measurement Interface.

🖥️

Bidirectional Instrument Bus

The SN74HC245N fits legacy laboratory and industrial instrument buses where a controller must exchange eight parallel data bits with a peripheral while avoiding driver contention. Its 2 V to 6 V operating range supports the 74HC logic environment, and its three-state outputs can disconnect all eight paths from a shared bus. According to the Texas Instruments manufacturer datasheet, the high-current output stage can drive 15 LSTTL loads directly. Place the transceiver close to the bus connector or logic device, route the DIR and output-enable signals as short controlled traces, and verify setup, hold, and propagation-delay margins at the slowest supported system clock. The main tradeoff is that this is a parallel, single-voltage transceiver rather than a modern differential or level-shifting interface.

🔧

Embedded Processor Bus Isolation

The SN74HC245N can place an 8-bit processor or peripheral bus behind a controlled three-state buffer, reducing contention between multiple bus masters. The DIR input selects the communication direction, while the common output-enable input can isolate the device when another controller owns the bus. Its non-inverting logic preserves data polarity, and the 20-pin PDIP package supports through-hole prototyping. According to the Texas Instruments manufacturer datasheet, the output stage can drive 15 LSTTL loads. In a multi-master design, ensure that only one transceiver asserts its outputs at a time and that enable timing accounts for the device’s propagation delay. For long, high-speed buses, add controlled impedance or a dedicated transceiver rather than relying only on the logic output.

📊

Data Acquisition Backplane

The SN74HC245N is useful on parallel data-acquisition backplanes that require a short bidirectional link between measurement logic and a controller. The common direction and output-enable controls simplify management of a shared eight-bit data bus, while the three-state outputs allow the node to become electrically inactive during another module’s transmission. According to the Texas Instruments manufacturer datasheet, the device supports operation from 2 V to 6 V and can drive 15 LSTTL loads. Keep the transceiver’s supply return close to the logic ground and minimize the distance between its pins and the protected backplane connector. Engineers should verify input thresholds, output drive, timing, and fanout against the acquisition system’s actual load, especially when cable capacitance raises edge-rate requirements.

💻

Computer Peripheral Interface

The SN74HC245N supports legacy parallel computer peripherals that exchange an entire byte over shared wires and require a way to relinquish the bus. A DIR-controlled eight-bit path can connect a host adapter to a printer, storage controller, or external test module, while the output-enable input provides a controlled high-impedance state during turnaround. According to the Texas Instruments manufacturer datasheet, the transceiver is designed for asynchronous two-way communication and minimizes external timing requirements. The logic family’s CMOS-compatible supply range also supports integration with 74HC controllers. Care is needed at connectors and cable transitions because the SN74HC245N is intended for logic-level bus loading, not long-distance differential communication; add series damping or a physical-layer transceiver when cable length or ground offsets become significant.

🏭

Industrial Control Module

The SN74HC245N can bridge a PLC or embedded controller to a parallel I/O module in an industrial system while allowing the bus to be disabled during maintenance or controller handoff. Its 8-bit bidirectional architecture and common control signals simplify board-level bus partitioning, while the 6 V maximum supply and LSTTL drive capability support conventional industrial logic levels. According to the Texas Instruments manufacturer datasheet, the transceiver can operate across the 74HC supply range and drive 15 LSTTL loads. Use its three-state behavior only after confirming that all connected nodes use compatible voltage thresholds. Protect external connectors as appropriate for the installation environment, and validate timing over the full operating-temperature range because propagation delay and output characteristics can vary with supply voltage and temperature.

🧪

Test and Measurement Interface

The SN74HC245N can connect test logic to a bench instrument or fixture through an eight-bit parallel command and response bus. The common direction control makes command/response turnaround straightforward, and the three-state outputs let the fixture release the bus when a different tester or external fixture is connected. According to the Texas Instruments manufacturer datasheet, the device is designed for asynchronous two-way communication and its output stage can drive 15 LSTTL loads. Keep the transceiver close to the logic connector, provide a low-impedance supply return, and avoid routing the bus beside switching converters or high-current relays. For high-speed automated test systems, account for propagation delay and bus-turnaround time rather than assuming the direction change is instantaneous.

추천 제품 요약

SN74HC244N Texas Instruments 사용처: Bidirectional Instrument Bus, Data Acquisition Backplane, Computer Peripheral Interface, Test and Measurement Interface SN74HC125N Texas Instruments 사용처: Bidirectional Instrument Bus, Industrial Control Module SN74HC245N Texas Instruments 사용처: Embedded Processor Bus Isolation SN74HC573N Octal latch for register-style bus interfaces 사용처: Embedded Processor Bus Isolation, Computer Peripheral Interface, Test and Measurement Interface SN74HC04N Hex inverter for complementary control signals 사용처: Data Acquisition Backplane SN74HC08N AND gate for bus-control logic 사용처: Industrial Control Module
What is the SN74HC245N and what does it do?
The SN74HC245N is an 8-bit, non-inverting, bidirectional bus transceiver with three-state outputs in a 20-pin PDIP package. According to the Texas Instruments manufacturer datasheet, it is intended for asynchronous two-way communication between data buses, with a common direction input and a common output-enable input controlling all eight channels.
What is the operating voltage of SN74HC245N?
The SN74HC245N operates from 2 V to 6 V, with a maximum supply rating of 6 V. According to the Texas Instruments manufacturer datasheet, its CMOS-compatible supply range allows operation in both CMOS and low-power Schottky TTL systems. The exact operating-temperature limits and input/output thresholds should be selected from the ordering information in that datasheet.
How does the SN74HC245N direction control work?
The DIR input determines the direction of all eight data paths on the SN74HC245N. According to the Texas Instruments manufacturer datasheet, one logic state transfers data from the A bus to the B bus, while the opposite state transfers data from B to A. Because direction control is common to all channels, the complete byte changes direction at once.
What does the three-state output of SN74HC245N mean?
The three-state output allows each SN74HC245N output to operate as a driving logic level, the opposite logic level, or a high-impedance state. According to the Texas Instruments manufacturer datasheet, the common output-enable input can disable all eight outputs together. High-impedance outputs are useful when multiple devices share the same bus.
Where can I download the SN74HC245N datasheet PDF?
The official SN74HC245N datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/sn74hc245.pdf. The manufacturer datasheet is the preferred source for the complete pin description, electrical characteristics, timing diagrams, recommended operating conditions, and package information.
Where can I find the SN74HC245N pinout?
The SN74HC245N pinout is shown in the Texas Instruments manufacturer datasheet and follows the standard 20-pin bus-transceiver arrangement. Pins 2 through 8 and 18 form the B-side data bus, pins 11 through 17 and 20 form the A-side data bus, while DIR, output enable, ground, and supply occupy the control pins.
Can the SN74HC245N drive LSTTL loads?
Yes, the SN74HC245N can drive 15 LSTTL loads directly according to the Texas Instruments manufacturer datasheet. Its high-current three-state outputs are designed to interface CMOS logic with low-power Schottky TTL buses, reducing the need for separate bus-driver stages when load and timing requirements are satisfied.
What is the quiescent current of SN74HC245N?
The SN74HC245N has a maximum specified quiescent supply current of 80 µA according to the Texas Instruments manufacturer datasheet. This low standby consumption is useful in battery-powered or power-managed equipment, although total system current also depends on operating frequency, load, supply voltage, and the state of the control inputs.
What can replace the SN74HC245N?
The 74HC245N is a generic 74HC245 octal-transceiver designation that can serve as a pin-compatible replacement when its package, supply range, control logic, and timing characteristics match the original device. The cross-reference listing supports functional equivalence, but a production substitution should also be checked against the replacement manufacturer’s package drawing and complete electrical specification.
Is the 74HC245N the same as SN74HC245N?
The 74HC245N and SN74HC245N describe closely related octal three-state bus transceivers, but the final qualification and package depend on the selected manufacturer. According to the SN74HC245N comparison listing, both provide an eight-bit non-inverting three-state transceiver with direction control; verify the exact suffix and package before approving a substitution.
When should I choose SN74HC245N instead of 74HC245N?
Choose SN74HC245N when the design requires the Texas Instruments-qualified 20-pin PDIP implementation and its documented electrical characteristics. Choose the generic 74HC245N when another manufacturer offers a verified 20-pin, pin-to-pin-compatible implementation with acceptable supply current, propagation delay, output drive, and lifecycle status.
SN74HC245N vs CD74HC245E: which is the better replacement?
The SN74HC245N is the safer direct-board replacement candidate because the suffix identifies a 20-pin PDIP package, while CD74HC245E denotes a different package option. The comparison material establishes functional similarity, but package geometry must match exactly; otherwise PCB changes or an adapter assembly are required, so CD74HC245E is not automatically a drop-in choice.
Where can I buy SN74HC245N and check its current lead time?
Use the Request a Quote form on this page to request SN74HC245N availability, current lead time, and order quantities. The form allows the purchasing team to confirm the exact Texas Instruments suffix, package, production status, and shipment requirements without relying on potentially stale catalog information.
Is SN74HC245N in stock?
Current SN74HC245N inventory should be confirmed through the Request a Quote form on this page. Because availability and lead time can change with order quantity, factory schedule, and packaging configuration, request the desired quantity and delivery target before treating the device as available for production.
What is the price of SN74HC245N?
The current SN74HC245N unit price is presented through the Request a Quote form on this page. Submit the required quantity, package, and shipping details to obtain a current quotation. This avoids publishing a static price that may not match the requested volume, tax treatment, or inventory status.
What are the key specifications of SN74HC245N that engineers should know?
The SN74HC245N is a 20-pin PDIP, 8-bit non-inverting bus transceiver with three-state outputs, a 2 V to 6 V operating range, and a maximum quiescent current of 80 µA. According to the Texas Instruments manufacturer datasheet, its outputs can drive 15 LSTTL loads, while DIR and the common output-enable input control the complete eight-bit bus.
Can SN74HC245N be used for bidirectional data acquisition?
Yes, the SN74HC245N can connect a controller to a bidirectional acquisition bus because it provides eight non-inverting paths, common direction control, and common three-state disable. According to the Texas Instruments manufacturer datasheet, its high-current outputs can drive 15 LSTTL loads, making it suitable for legacy parallel instrumentation when timing and noise margins meet the system requirements.

엔지니어링 참조 데이터: SN74HC245N — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose SN74HC245N for a new through-hole design that needs a Texas Instruments 8-bit non-inverting transceiver, a common direction control, a common three-state output enable, and compatibility with 74HC or LSTTL systems. Its 2 V to 6 V operating range, 80 µA maximum quiescent current, and 15 LSTTL-load drive capability make it appropriate for legacy parallel buses, embedded controller interfaces, and industrial data-acquisition equipment. The generic 74HC245N is a practical alternative when the alternate manufacturer’s 20-pin PDIP implementation has acceptable propagation delay, output drive, supply current, qualification, and lifecycle status. Do not substitute SOIC, TSSOP, or other surface-mount suffixes without changing the PCB. If the interface requires level translation, differential signaling, galvanic isolation, or operation beyond 6 V, choose a transceiver designed for those requirements instead of relying on the SN74HC245N.

대체품과의 비교

파라미터 이 제품 74HC245N
Brand Texas Instruments Nexperia
Package 20-pin PDIP 20-pin PDIP
Function Octal non-inverting bus transceiver Octal non-inverting bus transceiver
Number of Channels 8 channels 8 channels
Output State 3-state 3-state
Direction Control Common DIR input Common DIR input
Output Enable Common active-low OE input Common output-enable input

주요 차별점

  • Manufacturer-specific Texas Instruments implementation (vs 74HC245N)
  • Complete byte-level direction control (vs 74HC245N)
  • Common three-state bus release (vs 74HC245N)

설계 노트

Never allow two bus nodes to drive the same line simultaneously. Assert the SN74HC245N output-enable input only after every conflicting transceiver has entered its high-impedance state, and include bus-turnaround time in the control timing. The DIR and OE signals must not be allowed to float because unpredictable control states can produce contention or unintended data transfer.

Place the decoupling capacitor close to the VCC and GND pins and provide a low-impedance ground return. Keep the DIR and OE traces short and route them away from switching nodes, relay coils, and high-current outputs. For exposed connectors or long bus branches, use controlled rise times and termination appropriate to the board topology rather than adding large capacitive loads directly to every channel.

Validate propagation delay, setup and hold timing, output drive, and input thresholds at the actual supply voltage. The 6 V maximum operating voltage does not imply that 6 V logic thresholds apply equally at every lower supply. Also confirm the load count and bus capacitance because the 15 LSTTL-load capability describes drive strength, not unlimited cable length or guaranteed timing margin at every frequency.

Use only the supply range and decoupling arrangement specified by the Texas Instruments manufacturer datasheet. Although the maximum quiescent supply current is 80 µA, installed-system consumption can increase substantially when the outputs switch or drive external loads. Evaluate the complete circuit’s supply budget and ensure the regulator can support the dynamic current associated with eight simultaneously changing bus lines.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The device is a general-purpose commercial logic IC, not an automotive-qualified part. Compliance declarations were not identified in the available manufacturer-page excerpts and must be confirmed from the current Texas Instruments product page or applicable material-declaration documents.

관련 검색

sn74hc245n datasheet sn74hc245n datasheet pdf SN74HC245N pinout SN74HC245N 20-pin PDIP SN74HC245N operating voltage SN74HC245N 3-state output SN74HC245N DIR OE pinout SN74HC245N bus transceiver application SN74HC245N equivalent SN74HC245N replacement SN74HC245N vs 74HC245N Texas Instruments SN74HC245N SN74HC245N price SN74HC245N stock

관련 부품 & 용어

Texas Instruments SN74HC245N 74HC245N SN74HC244N SN74HC125N SN74HC573N 74HC high-speed CMOS logic octal bus transceiver logic transceiver three-state output bidirectional bus non-inverting logic DIR input output-enable input high-impedance state PDIP-20 DIP package through-hole mounting CMOS logic LSTTTL compatibility 2 V to 6 V supply asynchronous communication shared bus RoHS REACH
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기