STM32F303VET7 - 72MHz Cortex-M4 512KB MCU | STMicroelectronics
부품 번호: STM32F303VET7 ✓ 활성STM32F303VET7 개요
A microcontroller integrates a processor core, nonvolatile program memory, volatile data memory, peripheral interfaces, and control logic on one semiconductor device. The STM32F303VET7 belongs to STMicroelectronics’ STM32F3 family, where the ARM Cortex-M4 core provides 32-bit instruction execution and floating-point capability. This places the device within the embedded microcontroller hierarchy used for industrial controls, motor-control systems, instrumentation, and consumer equipment.
The headline specifications are a 72 MHz operating frequency, 512 KB of Flash organized as 512K x 8 bits, and a 100-LQFP package. The STM32F303xD/E family combines the Cortex-M4 processor with mixed-signal peripherals intended for applications that demand both control performance and accurate analog measurement. A 3.3 V operating supply supports integration into conventional embedded industrial and commercial equipment.
The STM32F303VET7 is a member of the STM32F303xD/E family, which is based on the high-performance ARM Cortex-M4 32-bit RISC core with an FPU. Its 72 MHz clock capability provides additional compute margin for control loops, communication tasks, and signal-processing workloads compared with lower-frequency general-purpose microcontrollers. The large 512 KB Flash region can accommodate application firmware, configuration data, and boot code while maintaining a compact 100-pin package.
Typical uses include industrial automation, sensor acquisition, motor and power-system control, communication equipment, test and measurement instruments, and compact embedded platforms. The MCU can be positioned as the central controller in a design that reads analog inputs, executes control algorithms, drives external actuators, and communicates with supervisory electronics. Its 3.3 V supply and 72 MHz performance make it especially suitable for industrial signal-chain applications.
Designers should treat the 100-LQFP footprint as a 0.5 mm-pitch package and plan decoupling, programming access, reset behavior, clock configuration, and peripheral routing on the PCB before layout. Because firmware configuration and peripheral requirements vary across STM32F303 designs, verify the exact peripheral assignments, alternate-function mappings, and startup requirements in the manufacturer pin-description and reference-manual tables before releasing production firmware.
This product record combines the official family specifications, package identification, sourcing information, temperature-grade comparison, and practical PCB guidance in one engineering reference. It is intended to help designers evaluate the STM32F303VET7 for 3.3 V embedded systems and determine whether an existing STM32F303 board can be reused without changing its 100-LQFP footprint.
드롭인 대체품: STM32F303VET7 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32F303VET7 (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature Range, Package, RoHS Status.
STM32F303VET6
✅ 드롭인✗ 재고 없음
$3.5 / 개
데이터시트 보기 →STM32F303VET8
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32F303VET7 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | ARM Cortex-M4 with FPU |
| Instruction Set | 32-bit RISC |
| 최대 클록 주파수 | 72 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| 동작 공급 전압 | 2.5 V to 3.3 V |
| 패키지 | 100-LQFP, 14 x 14 mm |
| 핀 수 | 100 pins |
| Product Family | STM32F303xD/E |
| Core Architecture | ARM Cortex-M4 32-bit RISC |
| FPU | Yes |
| ADC Resolution | 12-bit |
| 실장 유형 | Surface mount |
| 동작 온도 범위 | -40°C to +105°C |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
STM32F303VET7 100-lqfp, 14 x 14 mm 핀 구성 가이드
STM32F303VET7(100-lqfp, 14 x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F303VET7.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F303VET7 적합 용도: 6 애플리케이션s: Industrial Sensor Acquisition, Motor and Power-System Control, Test and Measurement Instrumentation, Communication Equipment, Programmable Logic and Control, Audio and Interface Control.
Industrial Sensor Acquisition
The STM32F303VET7 suits industrial sensor-acquisition equipment that must combine real-time control, analog measurement, and local data handling. Its 72 MHz ARM Cortex-M4 processor and FPU provide compute capacity for filtering, calibration, and control calculations, while 512 KB of Flash can hold firmware, configuration tables, and diagnostic logic. In a 3.3 V measurement controller, the MCU can sample sensors, process the results, apply compensation, and forward status to a communications interface. The 100-LQFP package offers access to the family’s mixed-signal resources, although the exact analog pin assignments must be checked in the manufacturer pin-description table. The 105°C upper operating rating provides thermal margin in industrial enclosures when board-level thermal analysis supports that limit.
추천
Motor and Power-System Control
The STM32F303VET7 is appropriate for compact motor-control and power-system controllers where deterministic embedded execution and mixed-signal capability are important. A 72 MHz Cortex-M4 core with an FPU can execute current-control, position-control, or supervisory algorithms while leaving capacity for communications and protection logic. The MCU can coordinate current sensing, gate-command generation, fault detection, and system monitoring from a 2.5 V to 3.3 V digital supply. Its 512 KB of Flash supports a substantial application program and parameter storage. Design teams should use the exact family peripheral mapping to assign timers, analog inputs, and debug signals, and should calculate worst-case junction temperature because power-control products may combine switching losses with limited enclosure cooling.
추천
Test and Measurement Instrumentation
The STM32F303VET7 can serve as the control processor in compact test and measurement instruments that need sequencing, signal processing, and user-interface coordination. Its 72 MHz Cortex-M4 core with FPU handles acquisition routines and numerical processing, while 512 KB of Flash provides room for embedded firmware, calibration data, and instrument control logic. The device can operate alongside external converters and amplifiers on a 3.3 V rail, issue commands, analyze captured data, and drive a local display or communications port. Its 100-LQFP package provides a manageable surface-mount option for multi-board instruments, but high-accuracy analog design still depends on careful reference grounding, isolation, filtering, and analog-versus-digital layout separation. The 105°C rating is useful in warm laboratory equipment when the calculated junction temperature remains compliant.
추천
Communication Equipment
The STM32F303VET7 fits communication equipment in which protocol handling, supervisory logic, and real-time control must operate from one compact microcontroller. The 72 MHz ARM Cortex-M4 core provides useful processing margin for framing, checksums, buffer management, diagnostics, and background control tasks, and the 512 KB Flash supports embedded firmware plus communication tables. At a 3.3 V rail, the MCU can coordinate a UART, SPI, CAN, or Ethernet PHY interface where those resources are enabled in the selected device configuration. A 100-LQFP package gives the designer access to a broad pin set without moving to a very large fine-pitch footprint. Firmware validation should include interrupt latency, peripheral instance availability, clock-tree settings, and bootloader behavior. Use the Request a Quote form for current sourcing of the exact ordering code.
추천
Programmable Logic and Control
The STM32F303VET7 can be used in programmable logic and machine-control modules that combine deterministic sequencing with communications and analog I/O. The 72 MHz Cortex-M4 processor is capable of executing state machines, motion or process logic, and diagnostic routines, while the FPU accelerates common mathematical operations. Its 512 KB of Flash is suitable for application firmware and configuration logic, and the 2.5 V to 3.3 V operating range integrates with conventional embedded electronics. Designers can use the 100-LQFP package for accessible assembly and inspection while retaining access to the STM32F303 family’s timers, communication interfaces, and mixed-signal functions. Final signal assignment must follow the manufacturer pin table, and boot or firmware migration should be tested before deployment because exact suffix and peripheral population determine behavior.
추천
Audio and Interface Control
The STM32F303VET7 can support audio and general interface-control products where a compact MCU must coordinate signal routing, configuration, communications, and protection. Its 72 MHz Cortex-M4 core with an FPU provides enough throughput for control processing and time-sensitive interface management, while the 512 KB Flash area supports application firmware and interface configuration. At a 3.3 V supply, the controller can supervise converters, amplifiers, user controls, and external communication transceivers. The 100-LQFP package offers sufficient pins for a conventional mixed-signal controller board and remains inspectable after assembly. Designers should separate sensitive analog paths from switching and high-current sections, maintain defined ground returns, and use the manufacturer pin-description table for every alternate function. The 105°C maximum rating provides useful enclosure margin where thermal calculations support it.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F303VET7 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32F303VET6 | STM32F303VET8 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) |
| Purchase Channel | Request a Quote on this page | Request a Quote on this page | Request a Quote on this page |
주요 차별점
- Higher temperature rating than the -6 suffix (vs STM32F303VET6)
- 72 MHz Cortex-M4 processing with an FPU (vs STM32F303VET6)
- Direct 100-LQFP footprint reuse (vs STM32F303VET6)
설계 노트
Treat the STM32F303VET7 as a 100-lead, 0.5 mm-pitch LQFP device and use the official package drawing to establish the land pattern, solder-mask clearance, and courtyard. Place decoupling capacitors close to the corresponding power pins and route each capacitor ground directly to the associated ground plane. Confirm every signal assignment against the STM32F303xD/E pin-description table because alternate functions and debug assignments constrain the usable I/O map.
Calculate the worst-case junction temperature from processor activity, peripheral loading, supply voltage, local heating, and the PCB thermal path rather than relying only on ambient temperature. The STM32F303VET7 is specified for operation up to 105°C, but that limit does not guarantee adequate margin in every enclosure. Use copper spreading where practical, preserve ventilation paths, and account for temperature rise from adjacent regulators, power stages, and switching components before production release.
Separate analog inputs, reference grounds, and high-speed digital or switching paths on the PCB. Use a continuous ground plane with carefully controlled return paths, keep clock and sensitive analog traces short, and place external filtering or protection close to the associated pins. Validate the final layout for the peripherals enabled in the exact firmware configuration, and check reset, clock, boot, and debug behavior during power sequencing before production firmware is released.
규정 준수 정보
The manufacturer product page and distributor results do not state the requested compliance statuses. No lead-free, halogen-free, conflict-minerals, RoHS, REACH, or AEC-Q100 claim is made.