STM32F405OEY6BTR - 168MHz Cortex-M4 MCU | STMicroelectronics
부품 번호: STM32F405OEY6BTR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
STM32F405OEY6BTR 개요
A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, communication interfaces, timers, and control peripherals. The STM32F405OE belongs to the STM32F4 high-performance embedded family, where the Cortex-M4 core executes control logic while DMA and hardware peripherals move data with limited CPU intervention. This hierarchy places the device between a basic processor and a complete embedded control platform.
Verified features include a 32-bit Arm Cortex-M4 processor, an FPU, DSP instructions, 210 DMIPS, adaptive real-time acceleration, a memory protection unit, and operation up to 168 MHz. The 512 KB Flash configuration provides room for application code and constants. Listed connectivity includes CANbus, I2C, SPI, I2S, UART/USART, USB OTG, IrDA, LINbus, and EBI/EMI, while listed peripherals include DMA, PWM, LCD support, watchdog, brown-out detection, and power-on reset.
The target order code identifies a 90-WLCSP package and an active device. Its high-performance core is appropriate for real-time motor and industrial control, while the broad interface set supports sensors, communications, data acquisition, and external memories. The exact pinout, electrical limits, clock configuration, and memory-map details should be confirmed from the STMicroelectronics STM32F405 family documentation before layout or firmware deployment.
Typical application roles include industrial controllers, connected metering equipment, motor-control boards, embedded automation modules, and IoT edge devices. Designers should plan decoupling and exposed-ball connectivity carefully in the WLCSP footprint, and should use STM32Cube or the supported toolchain to configure clocks, pins, memory, and peripherals.
The most important sourcing consideration is package-specific validation. The available verified data identifies 90-WLCSP, but it does not provide a complete verified list of pin-compatible alternatives or pricing tiers. This page therefore distinguishes confirmed data from missing engineering fields rather than inventing replacement parts or commercial values.
This product record synthesizes the verified STMicroelectronics family information, distributor references, application guidance, and design cautions. It is intended to support engineering selection and procurement review while directing engineers to the manufacturer datasheet for final electrical, pinout, and qualification decisions.
드롭인 대체품: STM32F405OEY6BTR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32F405OEY6BTR (동일 폼 팩터 및 풋프린트) — 차이점: Memory Protection Unit, Product Type, Flash Memory, Adaptive Real-Time Accelerator, Floating-Point Unit.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청STM32F405OEY6BTR 최대 정격 & 전기적 특성
| Product Type | 32-bit embedded microcontroller |
| Core | Arm Cortex-M4 |
| Core Width | 32-bit |
| 최대 클록 주파수 | 168 MHz |
| Flash Memory | 512 KB |
| 패키지 | 90-WLCSP |
| FPU | Present |
| DSP Instructions | Present |
| Adaptive Real-Time Accelerator | Present |
| Memory Protection Unit | Present |
| Connectivity | CANbus, EBI/EMI, I2C, IrDA, LINbus, SPI, UART/USART, USB OTG |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
| Part Status | Active |
| 핀 수 | 90 balls |
| 실장 유형 | Surface mount |
STM32F405OEY6BTR 90-wlcsp 핀 구성 가이드
STM32F405OEY6BTR(90-wlcsp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F405OEY6BTR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F405OEY6BTR 적합 용도: 6 애플리케이션s: Industrial Automation Controller, IoT Edge Device, Motor Control System, Connected Metering Equipment, Data Acquisition and Signal Processing, Embedded Communication Gateway.
Industrial Automation Controller
STM32F405OEY6BTR fits industrial automation control because its Arm Cortex-M4 core operates up to 168 MHz and includes DSP instructions and an FPU for responsive control logic. The verified connectivity list includes CANbus, UART/USART, SPI, and I2C, allowing the controller to connect to sensors, actuators, operator interfaces, and service equipment. DMA and PWM resources can reduce processor involvement in data movement and timing-sensitive outputs. Use the device only after confirming the required voltage range, temperature range, isolation, EMC, and watchdog architecture against the family datasheet.
추천
IoT Edge Device
The STM32F405OEY6BTR is appropriate for an IoT edge controller when local processing must occur close to sensors or actuators. Its 168 MHz Cortex-M4 performance, 512 KB Flash configuration, USB OTG, UART/USART, SPI, and I2C interfaces support connected sensing, protocol handling, and local control. The verified source specifically associates this family with IoT devices and low-power board designs. Before deployment, compare standby and active current, wireless-module power requirements, antenna integration, security configuration, and the exact 90-WLCSP footprint against the product design.
추천
Motor Control System
STM32F405OEY6BTR can serve as the supervisory or real-time control MCU in a motor-control board. The Cortex-M4 core with DSP instructions and an FPU supports numerical control algorithms, while PWM and DMA resources help coordinate timing-critical operations. CANbus, UART/USART, and other serial interfaces can connect motor drives to supervisory controls or diagnostics. The verified application listing explicitly includes motor control. Confirm timer assignments, PWM resolution, analog front-end requirements, current limits, thermal performance, and fault-safe shutdown behavior in the manufacturer documentation before layout release.
추천
Connected Metering Equipment
STM32F405OEY6BTR is well matched to metering equipment that must acquire, process, and communicate local measurements. Its listed EBI/EMI, SPI, I2C, UART/USART, and CANbus resources can connect analog front ends, memory, sensors, and remote communications. The 512 KB Flash capacity provides a defined code-storage starting point, while DMA and the 168 MHz core can support time-critical acquisition and filtering. Validate the required measurement accuracy, ADC and timer resources, calibration strategy, communication protocol, and power budget against the verified family documentation.
추천
Data Acquisition and Signal Processing
STM32F405OEY6BTR can support compact signal-processing and data-acquisition nodes because its Cortex-M4 core reaches 168 MHz and provides DSP instructions plus an FPU. Listed DMA, SPI, I2S, UART/USART, and USB OTG interfaces create useful paths for sensors, converters, storage, and host connectivity. The adaptive real-time accelerator is also identified as a family feature and may help Flash-based execution in suitable designs. Confirm interrupt latency, DMA channel assignments, ADC characteristics, input bandwidth, memory availability, and deterministic timing before claiming application performance.
추천
Embedded Communication Gateway
STM32F405OEY6BTR can form the central MCU of an embedded communication gateway when multiple serial interfaces and moderate local processing are needed. The verified feature list includes CANbus, USB OTG, UART/USART, SPI, I2C, IrDA, LINbus, and EBI/EMI, while DMA can offload transfers from the 168 MHz core. This combination suits protocol conversion, local routing, and supervisory control. Engineering review should confirm buffer strategy, interrupt priorities, electrical transients, connector protection, firmware update method, and the exact pin multiplexing required by the 90-WLCSP package.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F405OEY6BTR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | STMicroelectronics |
| Package | 90-WLCSP |
| Core | Arm Cortex-M4 |
| Maximum Clock Frequency | 168 MHz |
| Flash Memory | 512 KB |
| Connectivity | CANbus, I2C, SPI, UART/USART, USB OTG |
| Peripherals | DMA, I2S, LCD, POR, PWM, WDT |
| Lifecycle Status | Active |
주요 차별점
- High-performance Cortex-M4 integration (vs STM32L151VBH6)
- Broad verified connectivity set (vs STM32F413VGH6)
- Defined Flash and package identity (vs STM32F405VGT6TR)
설계 노트
The verified package is 90-WLCSP, so the PCB layout should be treated as a fine-pitch assembly task rather than a conventional leaded or large-outline design. Confirm the official package drawing, ball map, land pattern, solder-mask definition, paste stencil, and assembly process before release. Keep decoupling and any exposed thermal or ground-ball connections aligned with the manufacturer recommendations; the supplied data does not include the complete pin mapping or recommended capacitor values.
Validate the complete power tree and signal-level limits from the STM32F405 family documentation before connecting external buses or sensors. The supplied data confirms a 168 MHz Cortex-M4 device with USB OTG, CANbus, and multiple serial interfaces, but it does not specify supply voltage, current limits, pin tolerances, or power sequencing. Use local decoupling and transient protection appropriate to the actual design, and verify every external interface against the electrical limits rather than relying on generic MCU assumptions.
Do not treat a related STM32 MPN as a drop-in replacement without checking the package, pin assignment, memory, peripheral multiplexing, and electrical limits. The supplied evidence identifies STM32F405OEY6BTR as 90-WLCSP with 512 KB Flash, while the cross-reference results did not establish a verified compatible replacement. Firmware startup, clock settings, peripheral instances, and pin multiplexing also require device-specific validation; a successful package fit alone is not sufficient.
규정 준수 정보
The supplied verified data identifies an active STMicroelectronics microcontroller and an industrial, IoT, automation, motor-control, metering, and low-power application context. It does not provide explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification claims.
