STM32F410RBT6 - 32-Bit 100MHz Cortex-M4 MCU | STMicroelectronics
부품 번호: STM32F410RBT6 ✓ 활성STM32F410RBT6 개요
A microcontroller is an integrated circuit that contains a processor core, program memory, data memory, peripherals and interface circuitry on one semiconductor device. The STM32F4 family sits within the Arm Cortex-M microcontroller hierarchy, where the STM32F410RBT6 provides a balance of processing performance, memory capacity and power efficiency. Its 100 MHz operating frequency supports responsive control loops, while the Arm Cortex-M4 instruction set provides efficient handling of embedded applications.
The STM32F410RBT6 includes 128KB of flash memory organized as 128K x 8, as identified in the manufacturer and distributor product descriptions. Its 32-bit architecture and 100 MHz maximum clock frequency make it suitable for consumer devices, sensor hubs, industrial control modules and connected embedded products. The device also supports floating-point and DSP-oriented application requirements, matching the STM32F4 positioning for efficient control and signal-processing workloads.
The STM32F410RBT6 is packaged in a 64-LQFP configuration with a 10 x 10 mm outline. LQFP packages provide exposed leads around the perimeter of the package, making them suitable for automated assembly and designs that require a conventional surface-mount footprint. The STM32F410RB product page identifies the STM32F410x8/B devices as Arm Cortex-M4 devices operating at up to 100 MHz, while the DigiKey listing specifies the 64-LQFP package and 128KB flash configuration.
Typical applications include compact industrial controllers, environmental monitoring nodes, wearable and accessory control boards, communication modules, motor-control peripherals and general-purpose embedded control platforms. The combination of 32-bit processing, 128KB flash memory and a 64-pin package provides flexibility for applications requiring multiple I/O functions in a relatively small board area.
Designers should use the manufacturer datasheet pin description table when assigning PCB nets and should verify oscillator, debug, power, reset and peripheral configuration requirements against the exact package variant. Firmware development should also account for the STM32F410 device family's clock, flash-memory and peripheral characteristics rather than assuming compatibility with unrelated STM32 families.
This product page combines manufacturer-device identification, package and memory details with application guidance, comparison fields and practical design considerations. It is intended to help engineers identify the STM32F410RBT6 and determine whether its Cortex-M4 performance, 128KB flash memory and 64-LQFP footprint fit a new embedded-control design.
드롭인 대체품: STM32F410RBT6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청STM32F410RBT6 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Manufacturer | STMicroelectronics |
| Core | Arm Cortex-M4 32-bit RISC |
| 최대 클록 주파수 | 100 MHz |
| Flash Memory | 128KB (128K x 8) |
| 데이터 버스 폭 | 32 bit |
| 패키지 | 64-LQFP (10x10) |
| 장착 스타일 | SMD/SMT |
| Manufacturer Family | STM32F4 series |
| Microcontroller Subfamily | STM32F410x8/B |
| Architecture | Arm Cortex-M4 32-bit RISC |
STM32F410RBT6 64-lqfp (10x10) 핀 구성 가이드
STM32F410RBT6(64-lqfp (10x10) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F410RBT6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F410RBT6 적합 용도: 6 애플리케이션s: Compact Industrial Control Module, Environmental Sensor Hub, Wearable and Accessory Controller, Motor and Motion Control Peripheral, Communication Gateway Module, LED Lighting Control Board.
Compact Industrial Control Module
The STM32F410RBT6 fits compact industrial control modules that require a 100 MHz 32-bit processing core without the memory overhead of a higher-end microcontroller. Its 128KB of on-chip flash provides room for control firmware, state-machine logic and communication routines, while the 64-LQFP package exposes a broad set of GPIO and peripheral resources. A designer can place the MCU beside power conversion, sensing and output-driver circuitry on a small multilayer PCB. The Cortex-M4 instruction set supports efficient digital filtering and real-time control calculations, while the family positioning keeps the design within the STM32F4 ecosystem. Before layout release, verify the exact power pins, oscillator requirements, debug interface and all peripheral assignments against the 64-LQFP package documentation.
추천
Environmental Sensor Hub
The STM32F410RBT6 is appropriate for an environmental sensor hub that must acquire readings from multiple sensors, apply calibration and filtering, and present status through a local serial or network interface. Its 100 MHz Cortex-M4 core provides ample computational headroom for moving averages, threshold logic and sensor compensation, while 128KB of flash can hold application firmware and configuration data. The 64-LQFP format also supports a conventional SMD assembly process and provides more pin options than a small microcontroller package. Keep analog sensor traces separated from switching nodes and route ground returns carefully to prevent measurement noise. The manufacturer pin table and application guidance should determine the final peripheral allocation and decoupling arrangement.
추천
Wearable and Accessory Controller
The STM32F410RBT6 can serve as the central controller in a compact wearable accessory or personal-device module where a low-pin-count surface-mount package and local firmware storage are important. The 100 MHz Arm Cortex-M4 core supports responsive user-interface logic, haptic control, power-state management and communication protocol handling, while 128KB of flash accommodates application code and update logic. Its LQFP-64 package offers enough peripheral connectivity for sensors, buttons, indicators and external transceivers without requiring a very fine-pitch ball-grid array. Board-area and power-efficiency requirements should still be evaluated against the complete device electrical characteristics. Confirm package orientation, exposed programming headers and low-power mode behavior before committing the PCB layout.
추천
Motor and Motion Control Peripheral
The STM32F410RBT6 fits a dedicated motor or motion-control peripheral built around timers, digital position feedback and external driver devices. Its Cortex-M4 core operates up to 100 MHz, giving designers room for control-loop calculations alongside communications and supervisory logic. The 128KB flash capacity supports firmware for motion profiles, fault handling and configurable behavior. Because the MCU does not directly perform high-power motor switching, it should operate alongside a suitable gate driver or power stage, with careful partitioning between sensitive control signals and noisy switching nodes. Use the manufacturer timer and pin-assignment documentation to select alternate-function mappings, and validate timing, output polarity and fault handling on prototype hardware.
추천
Communication Gateway Module
The STM32F410RBT6 is well suited to a compact communication gateway that converts a local serial interface into another network protocol, performs buffering and handles device management commands. Its 100 MHz Cortex-M4 core can execute protocol state machines concurrently, while 128KB of flash provides space for networking, configuration and update logic. The 64-LQFP package gives the board designer access to a broad peripheral selection and supports standard automated assembly. Implement the module with separate transceiver circuits and controlled impedance routing where required by the physical protocol. Confirm the exact USART, SPI or other peripheral resources and alternate-function pins from the STM32F410 documentation, then test protocol timing at the intended clock configuration.
추천
LED Lighting Control Board
The STM32F410RBT6 can be used in an LED lighting control board for dimming, scene selection, status indication and communication with a master controller. Its 100 MHz 32-bit core provides more processing capability than a simple logic device while retaining a compact 64-LQFP footprint. Firmware can implement smooth dimming profiles, thermal-policy coordination, fault detection and remote command handling within the available 128KB program memory. External driver circuits should perform the actual LED current regulation, while the MCU supplies control signals and monitors status. Keep high-current LED return paths away from sensitive control traces and follow the manufacturer pin table when assigning timer outputs for accurate pulse-width modulation.
추천
엔지니어링 참조 데이터: STM32F410RBT6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | STMicroelectronics |
| Package | 64-LQFP (10x10) |
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Maximum Clock Frequency | 100 MHz |
| Flash Memory | 128KB (128K x 8) |
| Data Bus Width | 32 bit |
| Mounting Style | SMD/SMT |
| Core | Arm Cortex-M4 32-bit RISC |
| Manufacturer Family | STM32F4 series |
주요 차별점
- 100 MHz 32-bit Cortex-M4 processing performance (vs STM32F302RET6)
- On-chip flash sized for embedded control firmware (vs STM32L496RGT6)
- Direct match to a 64-LQFP 10 x 10 mm footprint (vs STM32F410RB)
설계 노트
Use the STM32F410RB package drawing to establish the 64-LQFP footprint, including lead width, pitch, toe length and pin-1 orientation. Place required decoupling capacitors immediately beside their associated supply pins and provide a low-impedance return path for each supply connection. Avoid routing high-speed or switching signals beneath the MCU where return currents would couple into sensitive internal reference or oscillator paths.
Treat the supply network as a complete design rather than a set of isolated capacitors. Confirm every power and ground pin, the permitted input range and the manufacturer’s recommended input and output capacitance from the official datasheet. Keep the regulator output impedance and board layout consistent with the transient current expected from the STM32F4 peripherals. Validate startup and brownout behavior across the intended voltage range before production release.
Plan oscillator, debug and communication pins before finalizing component placement. Keep oscillator traces short, maintain the recommended ground reference beneath the oscillator network and route SWD signals away from noisy power-conversion stages. Use the manufacturer alternate-function tables to confirm that peripheral signals are assigned to pins that support the required timer, serial or debug function in the exact 64-LQFP variant.
Do not assume that every STM32F4 device has the same peripheral set, clock tree, memory organization or startup sequence as the STM32F410RBT6. The family name alone is not enough for pin-compatible substitution. Review the exact ordering code, package drawing, pin table and reference manual, then run peripheral, interrupt and low-power tests on the intended board revision.
규정 준수 정보
The product listing identifies STMicroelectronics and the STM32F4 family but does not state the requested compliance statuses. Confirm RoHS, REACH, lead-free, halogen-free and conflict-minerals documentation for the exact ordering code before regulatory submission.
