STM32F723IEK6 - 216MHz Cortex-M7 512KB MCU | STMicroelectronics
부품 번호: STM32F723IEK6 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $12.2762 | $12.28 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
STM32F723IEK6 개요
A microcontroller is a compact embedded-computing semiconductor that integrates a processor core, memory, peripherals, and interfaces into one device. The STM32F7 family belongs to the ARM Cortex-M microcontroller hierarchy, combining real-time control capability with programmable logic, data storage, and communication channels. This makes the STM32F723IEK6 suitable as the central controller in industrial, consumer, communications, audio, and embedded systems.
The verified data identifies a 216 MHz ARM Cortex-M7 core, 32-bit architecture, 512 KB Flash memory, Art Accelerator, L1 cache, and SDRAM support. The 176-UFBGA package provides a dense surface-mount footprint for compact PCB designs, although its fine pitch requires careful PCB layout and inspection. The high operating frequency supports compute-intensive control loops and real-time signal processing, while the FPU accelerates suitable floating-point workloads.
STMicroelectronics positions the STM32F722xx and STM32F723xx devices as high-performance ARM Cortex-M7 products. The STM32F723IEK6 is identified as a 512 Kbyte Flash device with a 216 MHz CPU. Exact RAM capacity, peripheral configuration, voltage limits, temperature ratings, pin functions, and electrical limits were not provided in the verified sources and must be confirmed from the manufacturer datasheet before design release.
Typical design roles include industrial automation, motor and motion control, communications equipment, audio processing, data acquisition, and connected embedded products. In these applications, the MCU can execute control algorithms, manage external memory through supported peripherals, and interface with sensors, actuators, transceivers, and display or communication modules. The exact peripheral set and I/O availability should be checked against the selected package pinout.
For PCB implementation, use a multilayer board with a short ground plane, controlled high-speed routing, and careful decoupling near the supply pins. Because the UFBGA package is not visually leaded, verify pad geometry, assembly process capability, and stencil design against STMicroelectronics package documentation. Do not substitute pin-compatible claims based only on a similar STM32 device name; verify package dimensions, exposed pads, power requirements, pin multiplexing, and firmware support.
This page consolidates the verified STM32F723IEK6 identity, package, memory, processor, and sourcing information with practical design guidance. For a production decision, confirm lifecycle status, current inventory, pricing, and complete electrical and pin-level data through STMicroelectronics and authorized distributors.
드롭인 대체품: STM32F723IEK6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
STM32F723ZEI6
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F723IEK6 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M7 microcontroller |
| CPU Core | ARM Cortex-M7 |
| Maximum CPU Frequency | 216 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 |
| DSP Capability | High-performance and DSP with FPU |
| Floating-Point Unit | FPU |
| Art Accelerator | Supported |
| L1 Cache | Supported |
| SDRAM Support | Supported |
| 패키지 | 176-UFBGA |
| Package Dimensions | 10 mm x 10 mm |
| 실장 유형 | Surface Mount |
| Operating Voltage | 1.8 V, 2.5 V, or 3.3 V |
STM32F723IEK6 10 mm x 10 mm 핀 구성 가이드
STM32F723IEK6(10 mm x 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F723IEK6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F723IEK6 적합 용도: 6 애플리케이션s: Industrial Automation Controller, Audio Signal Processing, Motor and Motion Control, Communications Gateway, Data Acquisition System, Embedded Graphical and HMI System.
Industrial Automation Controller
The STM32F723IEK6 fits industrial automation control when a design needs a fast 216 MHz ARM Cortex-M7 core and floating-point processing for real-time calculations. Its verified FPU and DSP capability can accelerate filtering, control, and motion-related algorithms, while SDRAM support can help when working data exceeds internal memory. Use it as the central controller for sensor acquisition, actuator sequencing, and communications management, but confirm the industrial temperature rating, supply limits, and exact peripheral set in the manufacturer documentation.
추천
Audio Signal Processing
The 216 MHz Cortex-M7 core and FPU make STM32F723IEK6 a reasonable candidate for audio DSP, including real-time filtering, mixing, decoding, or effect processing. SDRAM support can support larger sample buffers when external memory is fitted, although the verified data does not specify the exact audio peripherals or memory bandwidth. The design must confirm codec interfaces, sample-rate requirements, clocking, DMA behavior, and pin availability before selecting the MCU.
추천
Motor and Motion Control
STM32F723IEK6 can serve in motor-control and motion-control systems where deterministic control-loop execution benefits from a 216 MHz Cortex-M7 core and FPU. The processor can combine sensor feedback, mathematical transforms, and actuator commands in one embedded platform. The supplied data does not verify PWM channels, timer resolution, encoder interfaces, or analog front ends, so these functions must be checked against the complete STM32F723IE datasheet and the selected 176-UFBGA pinout.
추천
Communications Gateway
The STM32F723IEK6 can be evaluated for communications gateways because its 216 MHz core provides substantial processing headroom for protocol handling, buffering, and management tasks. SDRAM support may benefit designs that need external working memory for packet queues or data staging. The verified material does not enumerate Ethernet, USB, CAN, or other interface availability, so the design must confirm the required communication peripherals and their pin multiplexing in the manufacturer documentation.
추천
Data Acquisition System
STM32F723IEK6 is suitable for applications needing high-speed embedded data handling, including sensor aggregation, buffering, and real-time filtering. The 216 MHz Cortex-M7 core provides processing margin for control and communication tasks, while the verified SDRAM support offers a path to larger external working-memory configurations. Exact ADC resolution, conversion speed, DMA channels, timer inputs, and analog supply requirements are not included in the verified data and must be checked before schematic approval.
추천
Embedded Graphical and HMI System
The STM32F723IEK6 can be considered for compact human-machine interfaces when the design benefits from a high-performance Cortex-M7 core and external memory support. The 216 MHz processing rate can manage control logic, communication, and display-related tasks, while the 176-UFBGA package helps preserve board area. The verified data does not confirm LCD or graphics peripherals, external display interfaces, or package pin availability, so HMI suitability depends on the complete peripheral and memory configuration.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F723IEK6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32F723ZEI6 | STM32F765ZIT7 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
주요 차별점
- High-performance Cortex-M7 processing (vs STM32F103RCY6CTR)
- 512 KB Flash configuration (vs STM32F723ZEI6)
- FPU, Art Accelerator, L1 cache, and SDRAM support (vs STM32F103RCY6CTR)
- Compact 176-UFBGA integration (vs STM32F765ZIT7)
설계 노트
STM32F723IEK6 uses a 176-UFBGA package, so the PCB land pattern must be taken directly from the STMicroelectronics package drawing. Keep power and ground connections short, use a continuous ground reference, and place decoupling capacitors close to the relevant supply balls. Verify ball numbering, exposed-pad requirements, solder-mask definition, and assembly stencil data before releasing artwork.
At 216 MHz, routing discipline is important even though the supplied data does not specify every high-speed interface. Avoid long uncontrolled traces, provide continuous return paths, and separate clocks and sensitive analog signals from noisy switching routes. Use the manufacturer timing, impedance, and reference-circuit guidance rather than relying on generic WLCSP or BGA assumptions.
Do not treat STM32F723ZEI6, STM32F765ZIT7, or a similarly named STM32 device as a substitute without checking the exact package, pinout, power architecture, memory map, clock tree, and peripheral configuration. The verified cross-reference results do not establish pin-compatible drop-in replacements. In addition, the complete 176-ball pinout and electrical limits are not present in the supplied data and must be taken from official STMicroelectronics documentation.
Validate thermal performance at the maximum intended clock, supply voltage, and ambient temperature. The verified sources identify a 216 MHz Cortex-M7 core but do not provide junction-temperature limits, package thermal resistance, or power dissipation figures. Use the manufacturer datasheet and measured or estimated board-level thermal data; any calculated temperature rise must be labeled as an estimate rather than a device specification.
규정 준수 정보
The supplied verified sources do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-mineral status. Obtain current STMicroelectronics compliance documentation for the exact orderable MPN and package.
