STM32G071RBI6 - 64MHz Cortex-M0+ 128KB MCU | STMicroelectronics
부품 번호: STM32G071RBI6 ✓ 활성STM32G071RBI6 개요
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces on one package. The STM32G0 family occupies the entry level of the STM32 portfolio and combines an Arm Cortex-M0+ architecture with low-cost integration and a broad set of embedded peripherals. It is positioned between simple fixed-function controllers and higher-performance microcontrollers requiring greater memory or peripheral bandwidth.
The STM32G071RBI6 combines a 64 MHz Arm Cortex-M0+ core with 128 KB of flash and 36 KB of RAM. The 64-UFBGA package provides a dense mounting option for space-constrained products, while its 32-bit architecture supports efficient control logic, digital interfaces, and moderate protocol handling. Its package and memory configuration suit applications that need more programmability than a basic logic device without requiring a high-end Cortex-M processor.
The STM32G0 series is designed for mainstream embedded applications, including industrial controls, consumer products, sensor nodes, connected equipment, and compact automation modules. A 64 MHz clock provides useful processing margin for protocol servicing, control-loop execution, and human-interface logic. The STM32G071RB product family is specifically described by STMicroelectronics as a mainstream Cortex-M0+ microcontroller family operating up to 64 MHz.
Compact BGA assembly requires careful PCB layout, thermal management, and assembly-process control. Use the manufacturer pinout, land-pattern, and recommended PCB design guidance when assigning signals and planning escape routing. Confirm the exact peripheral configuration, electrical limits, programming method, and package details in the manufacturer datasheet before releasing a production design.
드롭인 대체품: STM32G071RBI6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청STM32G071RBI6 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Manufacturer | STMicroelectronics |
| Product Series | STM32G0 |
| Processor Core | Arm Cortex-M0+ |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 |
| RAM | 36 KB |
| Core Configuration | Single core |
| 패키지 | 64-UFBGA (5 mm x 5 mm) |
| 실장 유형 | Surface mount |
| Product Positioning | Mainstream microcontroller |
STM32G071RBI6 64-ufbga (5 mm x 5 mm) 핀 구성 가이드
STM32G071RBI6(64-ufbga (5 mm x 5 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32G071RBI6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32G071RBI6 적합 용도: 6 애플리케이션s: Compact Industrial Control Modules, Industrial Sensor Hubs, Consumer Device Accessories, Connected Equipment and IoT Nodes, Motor and Actuator Control, LED Lighting and Display Control.
Compact Industrial Control Modules
The STM32G071RBI6 fits compact industrial-control modules that combine digital I/O, local sensing, actuator control, and communications. Its 64 MHz Arm Cortex-M0+ core provides processing margin for deterministic control tasks, while 128 KB of flash accommodates application firmware and 36 KB of RAM supports working buffers. The 5 mm by 5 mm 64-UFBGA package reduces board footprint compared with leaded packages. For a production design, verify the required timers, communication peripherals, operating temperature, supply range, and isolation conditions in the manufacturer documentation.
추천
Industrial Sensor Hubs
The STM32G071RBI6 is suitable for a compact sensor hub that samples multiple inputs and conditions their data before forwarding it over a serial or network interface. The 128 KB of flash provides room for drivers, protocol stacks, and application logic, while the 36 KB RAM can accommodate sampled data and protocol buffers. Its Cortex-M0+ architecture supports efficient 32-bit processing at up to 64 MHz. Confirm ADC performance, timer channels, interface availability, sensor timing, and low-power behavior against the manufacturer datasheet before fixing the system architecture.
추천
Consumer Device Accessories
The STM32G071RBI6 can serve as the primary controller in compact consumer accessories that combine buttons, indicators, status sensing, and a communications link. Its small 64-UFBGA package supports dense board layouts, and the 64 MHz processor is well matched to real-time control and lightweight protocol tasks. The 128 KB flash and 36 KB RAM provide a practical balance for embedded features without an external memory device. Validate EMC, ESD, standby behavior, accessory interfaces, and production-programming requirements in the relevant STMicroelectronics documentation.
추천
Connected Equipment and IoT Nodes
The STM32G071RBI6 supports compact connected-equipment nodes that gather local information and manage communications through UART, SPI, or another interface available in the final device configuration. Its 64 MHz Cortex-M0+ core can service protocol tasks alongside control logic, and 128 KB of flash provides useful firmware capacity for networking and application code. The dense 64-UFBGA package helps reduce equipment size. Check the exact peripheral mix, clock-tree requirements, communication timing, antenna integration, and low-power modes in the manufacturer datasheet.
추천
Motor and Actuator Control
The STM32G071RBI6 can serve as a compact controller for low- to medium-complexity motor and actuator systems requiring digital command processing, timing, and feedback handling. The 64 MHz Cortex-M0+ core provides a responsive control platform, while the 128 KB flash and 36 KB RAM support motion logic and buffers. The small package can shorten board routing in tightly packaged assemblies. Verify timer resolution, PWM outputs, encoder interfaces, required control-loop performance, fault handling, and thermal conditions before applying it to a safety-relevant or high-current design.
추천
LED Lighting and Display Control
The STM32G071RBI6 is appropriate for LED-lighting controllers or compact display modules that require sequencing, button management, status reporting, and communication with a higher-level controller. Its 128 KB flash can store lighting patterns and control firmware, while 36 KB RAM is sufficient for many buffered update and communication workloads. The 5 mm by 5 mm UFBGA package assists with compact lamp and display electronics. Verify PWM resolution, timer availability, display-interface requirements, dimming behavior, and current-driver timing before production release.
추천
엔지니어링 참조 데이터: STM32G071RBI6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 64-UFBGA (5 mm x 5 mm) |
| Brand | STMicroelectronics |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 128 KB |
| RAM | 36 KB |
| Architecture | 32-bit RISC |
| Core Configuration | Single core |
주요 차별점
- Dense 64-UFBGA implementation (vs STM32G071CBT3TR)
- Mainstream Cortex-M0+ performance (vs STM32G071CBT3TR)
- Purpose-built embedded memory balance (vs Generic low-power microcontroller options)
설계 노트
Base the PCB on the exact 64-UFBGA land pattern and escape-routing design in the manufacturer package documentation. Place required bypass capacitors close to their associated supply pins and keep high-speed clock and communications routes away from noisy power-conversion paths. Confirm every pad, ball assignment, and assembly orientation for the STM32G071RBI6 ordering code before fabrication.
Assess thermal performance using the package thermal data, PCB copper area, via pattern, ambient temperature, and actual switching activity. Estimated: P_DISSIPATION equals the average internal device dissipation, while junction temperature depends on that dissipation and the assembled thermal resistance; obtain the numerical values from the manufacturer datasheet before sizing copper or cooling. Avoid assuming that the compact UFBGA package can dissipate unrestricted power.
Do not infer drop-in compatibility from a shared STM32G071 family name. The RB order-code field identifies the 64-pin package, while other STM32G071 variants may use different pin counts, packages, memory capacities, temperature grades, or peripheral configurations. For a replacement, compare the exact ball map, supply pins, debug pins, oscillator pins, communications pins, exposed-pad requirements, and clock limits.
Determine supply-current demand from the manufacturer operating-mode tables using the selected clock, peripherals, GPIO loading, and temperature. Estimated: average regulator current equals the arithmetic mean of operating and quiescent currents over the applicable duty cycle. Apply startup, transient, decoupling, and brownout requirements from the manufacturer electrical-characteristics documentation rather than relying on a generic 3.3 V assumption.
규정 준수 정보
The product listing identifies STMicroelectronics, the STM32G071RBI6 ordering code, 128 KB flash, and the 64-UFBGA package. Exact-ordering-code environmental and material compliance declarations should be obtained from STMicroelectronics.
