STM32L100RCT6 - Ultra-Low-Power ARM Cortex-M3 MCU | STMicroelectronics
부품 번호: STM32L100RCT6 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.3636 | $7.36 |
| 10 | $5.3182 | $53.18 |
| 100 | $4.7045 | $470.45 |
| 500 | $4.5 | $2,250.00 |
| 960 | $4.2955 | $4,123.68 |
STM32L100RCT6 개요
What is an ultra-low-power microcontroller? An ultra-low-power microcontroller is a type of embedded processor designed to minimize energy consumption while maintaining computational capability. It typically integrates multiple low-power modes (such as sleep, stop, and standby) and features like dynamic voltage scaling and clock gating to extend battery life in portable and IoT devices. In the system hierarchy, an ultra-low-power MCU sits at the heart of embedded systems, managing sensors, actuators, and communication interfaces while consuming minimal power, often in the microamp range during standby.
Key features of the STM32L100RCT6 include its ultra-low-power modes: a low-power run mode at 5.1 µA, a sleep mode at 3.4 µA, a stop mode at 1.8 µA, and a standby mode at 0.4 µA (typical values). The device also integrates a 12-bit ADC with up to 16 channels, a 12-bit DAC, and a real-time clock (RTC) with calendar and alarm functions. It supports a wide operating temperature range of -40°C to +85°C, making it suitable for industrial and consumer applications.
Technically, the STM32L100RCT6 is built on ST's low-leakage process technology, which enables its exceptional power efficiency. The Cortex-M3 core includes a memory protection unit (MPU) and supports Thumb-2 instruction set for efficient code density. The device also features a flexible clock tree with multiple internal and external oscillator options, including a 32 kHz RTC oscillator and a 4-32 MHz main crystal oscillator. The integrated DMA controller allows peripheral-to-memory data transfers without CPU intervention, reducing power consumption and improving system throughput.
Typical applications include battery-powered sensor nodes, portable medical devices, smart meters, and industrial control systems. The STM32L100RCT6 is particularly well-suited for applications requiring long battery life, such as wireless sensor networks and wearable devices, where its ultra-low-power modes and fast wake-up times are critical. Its rich peripheral set also enables it to handle complex tasks like data logging, signal processing, and communication protocol implementation.
When designing with this device, it is essential to carefully manage the power supply and decoupling. Use a 100 nF capacitor close to each VDD pin and a 1 µF capacitor on the VDDA pin. Additionally, configure the clock system to use the low-speed internal oscillator (LSI) for the RTC to minimize power consumption in standby mode. Properly configure the GPIO pins to analog mode when unused to reduce leakage current.
드롭인 대체품: STM32L100RCT6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
STM32L162RCT6
✓ 재고 있음
$2.8636 / 개
데이터시트 보기 →STM32L151RCT6
✓ 재고 있음
$3.85 / 개
데이터시트 보기 →STM32L100R8T6
📋 참조 대체품 (카탈로그에 없음)
STM32L100RBT6
📋 참조 대체품 (카탈로그에 없음)
STM32L151R8T6
📋 참조 대체품 (카탈로그에 없음)
STM32L151RBT6
📋 참조 대체품 (카탈로그에 없음)
STM32L152RCT6
📋 참조 대체품 (카탈로그에 없음)
LPC1768FBD64
📋 참조 대체품 (카탈로그에 없음)
MSP430F5438AIPZR
📋 참조 대체품 (카탈로그에 없음)
STM32L100RCT6 최대 정격 & 전기적 특성
| Core | ARM Cortex-M3 |
| Max Frequency | 32 MHz |
| Flash Memory | 256 KB |
| SRAM | 16 KB |
| 공급 전압 | 1.8 V to 3.6 V |
| 패키지 | LQFP64 |
| 동작 온도 | -40°C to +85°C |
| Low-Power Run Mode | 5.1 µA (typical) |
| Sleep Mode | 3.4 µA (typical) |
| Stop Mode | 1.8 µA (typical) |
| Standby Mode | 0.4 µA (typical) |
| ADC Resolution | 12-bit |
| ADC Channels | 16 |
| DAC Resolution | 12-bit |
| RTC | Yes (with calendar and alarm) |
| DMA | Yes |
| GPIO Pins | 51 |
| USART | 3 |
| SPI | 2 |
| I2C | 2 |
| Timers | 8 |
STM32L100RCT6 핀 구성
| 핀 1 | VBAT — Backup battery supply for RTC and backup registers |
| 핀 2 | PC13 — GPIO or RTC tamper pin |
| 핀 3 | PC14 — GPIO or OSC32_IN |
| 핀 4 | PC15 — GPIO or OSC32_OUT |
| 핀 5 | PF0 — GPIO or OSC_IN |
| 핀 6 | PF1 — GPIO or OSC_OUT |
| 핀 7 | NRST — Reset pin, active low |
| 핀 8 | VSSA — Analog ground |
| 핀 9 | VDDA — Analog power supply |
| 핀 10 | PA0 — GPIO or ADC input |
| 핀 11 | PA1 — GPIO or ADC input |
| 핀 12 | PA2 — GPIO or USART2_TX |
| 핀 13 | PA3 — GPIO or USART2_RX |
| 핀 14 | PA4 — GPIO or DAC_OUT1 |
| 핀 15 | PA5 — GPIO or DAC_OUT2 |
| 핀 16 | PA6 — GPIO or SPI1_MISO |
| 핀 17 | PA7 — GPIO or SPI1_MOSI |
| 핀 18 | PB0 — GPIO or ADC input |
| 핀 19 | PB1 — GPIO or ADC input |
| 핀 20 | PB2 — GPIO or BOOT1 |
| 핀 21 | PB10 — GPIO or I2C2_SCL |
| 핀 22 | PB11 — GPIO or I2C2_SDA |
| 핀 23 | PB12 — GPIO or SPI2_NSS |
| 핀 24 | PB13 — GPIO or SPI2_SCK |
| 핀 25 | PB14 — GPIO or SPI2_MISO |
| 핀 26 | PB15 — GPIO or SPI2_MOSI |
| 핀 27 | PC6 — GPIO or TIM3_CH1 |
| 핀 28 | PC7 — GPIO or TIM3_CH2 |
| 핀 29 | PC8 — GPIO or TIM3_CH3 |
| 핀 30 | PC9 — GPIO or TIM3_CH4 |
| 핀 31 | PA8 — GPIO or MCO |
| 핀 32 | PA9 — GPIO or USART1_TX |
| 핀 33 | PA10 — GPIO or USART1_RX |
| 핀 34 | PA11 — GPIO or USART1_CTS |
| 핀 35 | PA12 — GPIO or USART1_RTS |
| 핀 36 | PA13 — GPIO or SWDIO |
| 핀 37 | PA14 — GPIO or SWCLK |
| 핀 38 | PA15 — GPIO or JTDI |
| 핀 39 | PB3 — GPIO or JTDO |
| 핀 40 | PB4 — GPIO or NJTRST |
| 핀 41 | PB5 — GPIO or I2C1_SMBA |
| 핀 42 | PB6 — GPIO or I2C1_SCL |
| 핀 43 | PB7 — GPIO or I2C1_SDA |
| 핀 44 | BOOT0 — Boot mode selection |
| 핀 45 | PB8 — GPIO or CAN_RX |
| 핀 46 | PB9 — GPIO or CAN_TX |
| 핀 47 | VSS — Ground |
| 핀 48 | VDD — Power supply |
| 핀 49 | PC10 — GPIO or USART3_TX |
| 핀 50 | PC11 — GPIO or USART3_RX |
| 핀 51 | PC12 — GPIO or USART3_CK |
| 핀 52 | PD2 — GPIO or TIM3_ETR |
| 핀 53 | PB0 — GPIO or ADC input |
| 핀 54 | PB1 — GPIO or ADC input |
| 핀 55 | PB2 — GPIO or BOOT1 |
| 핀 56 | PB10 — GPIO or I2C2_SCL |
| 핀 57 | PB11 — GPIO or I2C2_SDA |
| 핀 58 | PB12 — GPIO or SPI2_NSS |
| 핀 59 | PB13 — GPIO or SPI2_SCK |
| 핀 60 | PB14 — GPIO or SPI2_MISO |
| 핀 61 | PB15 — GPIO or SPI2_MOSI |
| 핀 62 | PC6 — GPIO or TIM3_CH1 |
| 핀 63 | PC7 — GPIO or TIM3_CH2 |
| 핀 64 | PC8 — GPIO or TIM3_CH3 |
일반적인 애플리케이션
STM32L100RCT6 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Nodes, Portable Medical Devices, Smart Meters, Industrial Control Systems, Wearable Devices, Wireless Sensor Networks.
Battery-Powered Sensor Nodes
The STM32L100RCT6 is ideal for battery-powered sensor nodes due to its ultra-low-power modes (standby 0.4 µA) and wide supply voltage range (1.8V-3.6V). In a typical wireless sensor node, the MCU wakes up periodically to read sensors, process data, and transmit via a radio module, then returns to standby. The low-power run mode at 5.1 µA allows continuous sensing with minimal energy consumption. The 12-bit ADC with 16 channels can interface with various analog sensors, while the DMA controller enables efficient data transfer without CPU intervention, further reducing power. The RTC with calendar and alarm functions can schedule wake-ups, ensuring the node spends most of its time in standby. Compared to higher-power MCUs, the STM32L100RCT6 can extend battery life from months to years, making it a preferred choice for environmental monitoring, smart agriculture, and industrial IoT applications.
추천
Portable Medical Devices
The STM32L100RCT6 is well-suited for portable medical devices such as glucose meters, pulse oximeters, and wearable health monitors. Its ultra-low-power operation is critical for battery-powered devices that must operate for extended periods. The 12-bit ADC can accurately digitize signals from biosensors, while the DAC can generate analog outputs for calibration or stimulation. The device's low-power modes allow it to remain in standby between measurements, preserving battery life. The wide operating temperature range (-40°C to +85°C) ensures reliable operation in various environments. The Cortex-M3 core provides sufficient processing power for signal processing algorithms, such as heart rate calculation or blood oxygen saturation estimation. The rich peripheral set, including USART, SPI, and I2C, enables communication with external sensors and displays. The STM32L100RCT6's small LQFP64 package allows for compact PCB designs, essential for wearable devices.
추천
Smart Meters
The STM32L100RCT6 is an excellent choice for smart meters, including electricity, water, and gas meters. These devices require long-term reliability and low power consumption, as they are often battery-powered and expected to operate for years without maintenance. The MCU's ultra-low-power modes, particularly standby at 0.4 µA, ensure minimal energy drain when not actively measuring. The 12-bit ADC can accurately measure analog signals from current and voltage sensors, while the RTC provides accurate time-stamping for usage data. The device's multiple communication interfaces (USART, SPI, I2C) allow connection to communication modules for remote data transmission. The 256 KB Flash memory provides ample space for data logging and firmware updates. The wide operating temperature range ensures reliable operation in outdoor environments. The STM32L100RCT6's low power consumption and robust feature set make it a cost-effective solution for smart metering applications.
추천
Industrial Control Systems
The STM32L100RCT6 is suitable for industrial control systems that require reliable operation in harsh environments. Its wide operating temperature range (-40°C to +85°C) and robust design make it suitable for factory automation, process control, and building automation. The device's multiple timers and PWM outputs can control motors, actuators, and lighting systems. The 12-bit ADC can monitor analog sensors for temperature, pressure, and flow. The USART, SPI, and I2C interfaces enable communication with industrial networks such as Modbus, CAN, and Ethernet (via external transceivers). The Cortex-M3 core provides sufficient processing power for control algorithms and data processing. The low-power modes are beneficial for energy-efficient operation, especially in battery-backed or energy-harvesting systems. The STM32L100RCT6's rich peripheral set and industrial-grade reliability make it a versatile choice for various industrial applications.
추천
Wearable Devices
The STM32L100RCT6 is ideal for wearable devices such as fitness trackers, smartwatches, and health monitors. Its ultra-low-power consumption is essential for devices that are worn continuously and rely on small batteries. The standby current of 0.4 µA allows the device to remain in sleep mode for extended periods, waking up only to process sensor data or user interactions. The 12-bit ADC can interface with accelerometers, gyroscopes, and heart-rate sensors. The DAC can generate audio signals for alerts or feedback. The device's small LQFP64 package enables compact and lightweight designs. The Cortex-M3 core provides enough processing power for real-time sensor fusion and activity recognition algorithms. The multiple communication interfaces (I2C, SPI, USART) allow connection to Bluetooth Low Energy modules for smartphone connectivity. The STM32L100RCT6's combination of low power, small size, and rich peripherals makes it a popular choice for wearable technology.
추천
Wireless Sensor Networks
The STM32L100RCT6 is well-suited for wireless sensor networks (WSNs) where nodes are deployed in remote locations and must operate on battery power for years. Its ultra-low-power modes, including standby at 0.4 µA, are critical for maximizing battery life. The device can wake up periodically to read sensors, process data, and transmit via a radio module, then return to sleep. The 12-bit ADC with 16 channels can interface with various sensors, while the DMA controller enables efficient data transfer without CPU intervention, reducing power consumption. The RTC can schedule wake-ups, ensuring precise timing for data collection. The device's multiple communication interfaces (USART, SPI, I2C) allow connection to various radio modules, such as LoRa, Zigbee, or sub-GHz transceivers. The 256 KB Flash memory provides ample space for data logging and over-the-air updates. The STM32L100RCT6's low power consumption and robust feature set make it an excellent choice for WSN applications.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32L100RCT6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32L151RCT6 | STM32L100R8T6 | STM32L100RBT6 | STM32L151R8T6 | STM32L151RBT6 | STM32L152RCT6 | STM32L162RCT6 | LPC1768FBD64 |
|---|---|---|---|---|---|---|---|---|---|
| Package | LQFP64 | LQFP64 | LQFP64 | LQFP64 | LQFP64 | LQFP64 | LQFP64 | LQFP64 | LQFP64 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | NXP Semiconductors |
| Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Max Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 100 MHz |
| Flash Memory | 256 KB | 256 KB | 64 KB | 128 KB | 64 KB | 128 KB | 256 KB | 256 KB | 512 KB |
| SRAM | 16 KB | 16 KB | 8 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 64 KB |
| Standby Current | 0.4 µA | 0.4 µA | 0.4 µA | 0.4 µA | 0.4 µA | 0.4 µA | 0.4 µA | 0.4 µA | 2.5 µA |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| DAC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | None |
주요 차별점
- Ultra-low standby current of 0.4 µA (vs LPC1768FBD64)
- Integrated 12-bit DAC (vs LPC1768FBD64)
- Pin-compatible with higher-performance STM32L1 family (vs STM32L151RCT6)
설계 노트
For optimal power consumption, use the low-speed internal oscillator (LSI) for the RTC and configure unused GPIOs to analog mode to reduce leakage. In standby mode, ensure all I/Os are properly configured to avoid floating inputs. Use the PWR_EnterSTANDBYMode function to enter standby, and configure wake-up sources such as the RTC alarm or external interrupts. The typical standby current is 0.4 µA, but this can increase if GPIOs are not properly set. Refer to the STM32L100xx datasheet and application note AN3193 for detailed low-power design guidelines.
Place a 100 nF decoupling capacitor close to each VDD pin and a 1 µF capacitor on the VDDA pin. Use a ground plane to minimize noise and ensure stable operation. For the crystal oscillator, place the crystal and load capacitors as close as possible to the OSC_IN and OSC_OUT pins, and keep the trace lengths short to reduce parasitic capacitance. Follow the layout recommendations in the STM32L100xx datasheet and application note AN2867 for oscillator design.
Avoid exceeding the absolute maximum ratings, particularly the supply voltage (VDD) which must not exceed 3.6V. Ensure the BOOT0 pin is properly configured to select the correct boot mode; a floating BOOT0 can cause unexpected boot behavior. When using the ADC, ensure the VDDA pin is properly decoupled and the reference voltage is stable. Also, be aware that the STM32L100RCT6 does not have a true EEPROM; if you need non-volatile data storage, consider using the STM32L151RCT6 which includes a true EEPROM.
규정 준수 정보
RoHS and REACH compliant per STMicroelectronics product page. Not AEC-Q100 qualified. Halogen-free status not specified in provided data.
