STMicroelectronics

STM32L433VCT3 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics

부품 번호: STM32L433VCT3 ✓ 활성
100-lead LQFP, 14 mm x 14 mm Package 80 MHz Speed 256 KB Memory
MOQ: 1 |

STM32L433VCT3 개요

STMicroelectronics STM32L433VCT3 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with integrated FPU, operating at up to 80 MHz and delivering 100 DMIPS in a 100-lead LQFP package. It provides 256 KB of embedded Flash memory, 64 KB of SRAM, USB full-speed connectivity, an LCD controller, and support for an external switched-mode power supply. The STM32L433VC family combines low-power operation with the processing capability needed for compact control, sensing, communication, and human-interface applications.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one package. In the system hierarchy, the STM32L433VCT3 belongs to the Arm Cortex-M4 class of 32-bit embedded microcontrollers within the broader MCU and embedded-processing market. Its FPU accelerates floating-point calculations in control loops and signal-processing routines, while its USB and display interfaces reduce the need for separate peripheral devices.

Key features include an Arm Cortex-M4 core operating up to 80 MHz, 100 DMIPS performance, 256 KB of Flash, 64 KB of SRAM, and a 100-pin LQFP package. The USB full-speed interface supports direct peripheral connectivity, while the LCD controller is useful for segment or graphical display systems. Low-power modes and external SMPS support are central to the family’s suitability for battery-powered and energy-conscious equipment.

The STM32L433VC architecture combines a high-performance Cortex-M4 core with peripherals intended for low-power embedded control. Its 100-pin package exposes more I/O and interface options than smaller STM32L4 variants, allowing designers to integrate USB, display control, communications, and multiple sensors without changing the footprint. The product family supports 256 KB of Flash for firmware and boot code, with 64 KB of SRAM available for application data and working memory.

Typical uses include industrial sensor controllers, USB-connected data-acquisition equipment, compact medical or laboratory instruments, display-oriented human-interface modules, wearable accessories, and low-power embedded gateways. The LCD controller and USB interface are especially useful when a product requires local visual feedback and direct computer connectivity while maintaining a small board area.

PCB design should preserve the LQFP-100 footprint and route decoupling and power-supply connections according to the manufacturer’s pin and layout guidance. USB routing requires controlled impedance and a correctly designed connector and protection network. Firmware selection should use STM32CubeMX or STM32CubeIDE to configure clocks, memory, USB, GPIO, and low-power behavior, and every exposed signal should be checked against the final pin-assignment plan.

This product overview combines the manufacturer’s MCU specifications with practical guidance for package reuse, power management, firmware setup, and qualification of candidate replacements. It also distinguishes exact published characteristics from parameters that an engineer must confirm in the device datasheet before schematic release or production procurement.

드롭인 대체품: STM32L433VCT3 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

STM32L452VCT3

✅ 드롭인 ⚠️ 사양 미검증
📦 100-lead LQFP
Shares the 100-pin LQFP footprint and 256 KB Flash class, but maximum core frequency is 100 MHz versus 80 MHz (+25%); peripheral and pin functions require revalidation.

📋 참조 대체품 (카탈로그에 없음)

STM32L476VCT3

✅ 드롭인 ⚠️ 사양 미검증
📦 100-lead LQFP
Shares the 100-pin LQFP footprint and Cortex-M4 architecture, but the STM32L476 family provides a different Flash-memory configuration and peripheral set from the STM32L433VC target.

📋 참조 대체품 (카탈로그에 없음)

STM32L486VCT3

✅ 드롭인 ⚠️ 사양 미검증
📦 100-lead LQFP
Shares the 100-pin LQFP footprint and Cortex-M4 architecture, but differs from the target in Flash capacity, performance features, and selected peripheral configuration.

📋 참조 대체품 (카탈로그에 없음)

STM32L433VCT3 최대 정격 & 전기적 특성

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M4 with FPU
Maximum Core Frequency 80 MHz
Peak Performance 100 DMIPS
Architecture 32-bit RISC
Embedded Flash Memory 256 KB
Flash Organization 256K x 8 bits
SRAM 64 KB
USB Interface USB full-speed
Display Controller LCD controller
External SMPS Supported
패키지 100-lead LQFP, 14 mm x 14 mm
실장 유형 Surface mount
Communication Interfaces USB FS; additional UART, SPI, and I2C interfaces per family datasheet

STM32L433VCT3 100-lead lqfp, 14 mm x 14 mm 핀 구성 가이드

STM32L433VCT3(100-lead lqfp, 14 mm x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

STM32L433VCT3의 100-lead lqfp, 14 mm x 14 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: STM32L433VCT3.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

STM32L433VCT3 적합 용도: 6 애플리케이션s: Industrial Sensor Controller, USB Data-Acquisition Module, Medical and Laboratory Instrument, Display-Based Human Interface, Low-Power IoT Gateway, Portable Measurement and Logging Device.

🏭

Industrial Sensor Controller

The STM32L433VCT3 fits industrial sensor controllers that combine multiple sensing inputs with a low-power 80 MHz Cortex-M4 processor. Its 256 KB of Flash and 64 KB of SRAM provide room for sampling, filtering, calibration, and communications firmware, while the 100-pin LQFP package exposes a broad selection of GPIO and peripheral connections. The MCU can coordinate analog and digital sensors, apply scaling, detect thresholds, and communicate results over USB or a serial interface. Low-power modes are important when the controller operates from a limited energy source. During implementation, configure unused pins for their intended analog, clock, or debug functions, provide local decoupling at every supply pin, and measure wake-up behavior over the full operating-temperature range.

🖥️

USB Data-Acquisition Module

The STM32L433VCT3 is suitable for a compact USB data-acquisition module that transfers measurements to a host computer. Its USB full-speed interface removes the need for a separate USB controller, and the 80 MHz Cortex-M4 core can execute signal conditioning, digital filtering, and protocol handling while the FPU supports floating-point calculations. With 256 KB of Flash and 64 KB of SRAM, the device can host firmware, descriptors, calibration tables, and sample buffers. A practical implementation should place USB routing on a controlled-impedance trace, include the connector’s required protection and common-mode network, and configure packet sizes and clocks for the intended transfer rate. Firmware should also distinguish bus-powered enumeration from applications that require a separate external supply.

💊

Medical and Laboratory Instrument

The STM32L433VCT3 can serve as the control MCU in a medical or laboratory instrument that combines acquisition, display control, and host communications. The 100-pin LQFP package provides more I/O than compact STM32L4 variants, allowing the design to connect sensors, buttons, indicators, and communication peripherals while retaining the family’s low-power characteristics. Its Cortex-M4 FPU supports control calculations at up to 80 MHz, and USB full-speed can provide a direct connection for configuration or data export. Because safety and measurement requirements vary by application, the MCU itself does not establish regulatory compliance; developers must apply suitable risk controls, isolation, calibration, and verification. Firmware and hardware should be separated from clinical claims through documented validation and traceability.

📺

Display-Based Human Interface

The STM32L433VCT3 fits human-interface modules that combine an LCD with buttons, rotary encoders, indicators, and configuration connectivity. Its integrated LCD controller reduces the component count of compact display products, while the 100-pin package provides ample GPIO for display control and user input. At 80 MHz, the Cortex-M4 core can update a graphical interface, debounce controls, manage local menus, and supervise sensors without a separate display controller. The design should allocate pins from the manufacturer’s alternate-function tables rather than assuming that every LCD signal is available on every package. Display timing, contrast, backlight control, and ESD protection should be designed for the selected panel. Low-power modes can reduce standby consumption when the interface is not being viewed, provided wake-up sources and state retention are configured correctly.

🧩

Low-Power IoT Gateway

The STM32L433VCT3 can act as the local controller in a low-power IoT gateway that gathers sensor data, performs local processing, and forwards information through USB or a serial link. Its ultra-low-power STM32L4 architecture is well suited to intermittently powered installations, and the Cortex-M4 core provides more than enough performance for protocol handling, filtering, and local state management. The 256 KB of Flash supports an embedded update mechanism, while 64 KB of SRAM accommodates network and sensor buffers. Designers should enable only the peripherals needed for the duty cycle, configure clocks to balance response time and current consumption, and use the external SMPS option when it provides an efficiency benefit. Wireless communication should be added as a separate certified module rather than assumed to be integrated into this MCU.

📱

Portable Measurement and Logging Device

The STM32L433VCT3 is appropriate for a portable measurement and logging device that must process sensor inputs while limiting energy use. The 80 MHz Cortex-M4 core can run sampling routines, filters, and logging algorithms, and its FPU handles floating-point transformations without requiring a higher-power application processor. The 256 KB of Flash and 64 KB of SRAM support embedded code and working buffers, while USB full-speed enables direct transfer of captured data to a computer. For portable operation, the regulator should be selected for both quiescent current and transient response, and the PCB should separate sensitive analog paths from digital and USB return currents. Storage interfaces, battery monitoring, and real-time timestamps must be validated during wake-up and data-loss scenarios to ensure that logging remains deterministic.

What are the key specifications of STM32L433VCT3 that engineers should know?
The STM32L433VCT3 combines an Arm Cortex-M4 core with FPU, up to 80 MHz operation, 100 DMIPS performance, 256 KB of Flash, 64 KB of SRAM, USB full-speed, an LCD controller, and a 100-pin LQFP package. According to the STMicroelectronics STM32L433xx datasheet, it is an ultra-low-power MCU family designed for embedded control and connected low-power products. These resources make it suitable for data acquisition, human-interface controllers, sensor nodes, and USB-connected equipment requiring more I/O than smaller STM32L4 packages.
What is the operating voltage of STM32L433VCT3?
The STM32L433VCT3 operates from a low-voltage supply compatible with its STM32L4 low-power architecture. The manufacturer datasheet defines the exact supply range and regulator configurations, which must be checked for the selected clock and peripheral configuration. For a production design, follow the recommended operating and shutdown supply limits and ensure every supply pin receives the voltage required by the selected power architecture.
What can replace STM32L433VCT3?
A valid replacement should use the same 100-pin LQFP footprint and provide compatible power, clock, debug, USB, and GPIO assignments. Same-family STM32L4 devices with 256 KB of Flash and an Arm Cortex-M4 core are the closest engineering candidates, but firmware and peripheral differences still require review. Use STM32CubeMX to compare pin allocation and peripheral configuration before approving a substitution, and confirm all electrical limits directly in the candidate manufacturer’s datasheet.
Is STM32L433VCT3 the same as STM32L476VCT6?
No. The STM32L433VCT3 is a 256 KB Flash member of the STM32L433VC family, while the STM32L476VCT6 belongs to a different STM32L4 device family and may provide substantially more Flash memory. Both use Arm Cortex-M4 technology, but differing memories, peripherals, clock trees, and package details prevent them from being treated as automatically interchangeable. A board-level redesign or a complete firmware and qualification review is required.
Where can I download the STM32L433VCT3 datasheet PDF?
Download the STM32L433xx datasheet PDF from the official STMicroelectronics resource link listed on this page. The document covers the Cortex-M4 MCU with FPU, 100 DMIPS performance, up to 256 KB of Flash, 64 KB of SRAM, USB full-speed, LCD support, and external SMPS functions. Because STM32L433VC ordering codes differ mainly in package and temperature options, use the ordering-information section to confirm that every temperature grade and pin configuration matches the PCB design.
Where can I find the STM32L433VCT3 pinout?
The STM32L433VCT3 pinout is defined in the pin-description and package drawings in the official STM32L433xx datasheet. The device uses a 100-lead LQFP package, so assign every power, ground, reset, clock, debug, USB, LCD, and GPIO connection using the manufacturer’s numbered package drawing. Do not infer pin positions from a generic 100-pin symbol because alternate functions and supply pins are specific to this device.
STM32L433VCT3 vs STM32L452VCT3 - which is better for a USB sensor controller?
The STM32L433VCT3 is the better match when the design specifically requires the STM32L433VC feature set, including its LCD controller and 256 KB of Flash allocation. The STM32L452VCT3 offers a different STM32L4 feature mix and may require firmware, peripheral, and pin-level revalidation even though both use Cortex-M4 technology and a comparable 100-pin package. For either device, confirm USB descriptor support, clock configuration, low-power behavior, and peripheral pin assignments before selecting the final MCU.
STM32L433VCT3 vs STM32L476VCT3 - which one should I choose?
Choose the STM32L433VCT3 when its 256 KB of Flash, 64 KB of SRAM, LCD controller, USB interface, and external SMPS support match the product without requiring additional program memory. Choose the STM32L476VCT3 when its different memory capacity and feature set are justified by the application. The higher-memory device is not automatically a drop-in upgrade because boot configuration, peripherals, and firmware assumptions must be reviewed against the official documentation.
When should I choose STM32L433VCT3 over another STM32L4 microcontroller?
Choose the STM32L433VCT3 when a design needs up to 80 MHz Cortex-M4 performance, 256 KB of Flash, 64 KB of SRAM, USB full-speed, LCD control, and a relatively pin-rich 100-pin LQFP package. A smaller STM32L4 package is preferable when only a few I/O pins are needed, while a higher-memory model is preferable when firmware or image storage exceeds 256 KB. The key selection criterion is matching memory, peripherals, package, and low-power requirements rather than choosing solely by core frequency.
Is STM32L433VCT3 suitable for battery-powered industrial sensors?
The STM32L433VCT3 is suitable for battery-powered industrial sensors because the STM32L433VC family is designed for ultra-low-power operation and includes low-power operating modes. Its USB and LCD capabilities can support configuration, diagnostics, and local status functions, although those interfaces should remain disabled when the device is operating from a constrained energy budget. Select capacitors, regulators, and external sensors for low leakage, then validate sleep current, wake time, and analog accuracy under the final operating environment.
Where to buy STM32L433VCT3 online?
Use the Request a Quote form on this page to request STM32L433VCT3 availability, current lead time, and the exact orderable MPN. Quote requests should identify the required package, quantity, and delivery location so that the correct 100-pin LQFP variant can be confirmed. STMicroelectronics also operates an official online store for this device, but production users should verify authorized-channel traceability and supply continuity for their planned build volume.
What is the price of STM32L433VCT3?
Current unit pricing for STM32L433VCT3 depends on order quantity, packaging, lead time, and market conditions, so it should be obtained through the Request a Quote form on this page. Submit the required quantity, delivery destination, and target date for a current quotation. The quote should be accepted only after confirming that the line item is the exact STM32L433VCT3 ordering code rather than a related STM32L433VC package or temperature grade.
What is the lead time for STM32L433VCT3?
The current lead time for STM32L433VCT3 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, assembly requirements, and supply conditions, so a quotation provides a more useful commitment than a generic catalog statement. Include the requested delivery schedule and annual usage with the request, and confirm whether the manufacturer or authorized channel can schedule segmented deliveries if a complete shipment is not immediately available.
Is STM32L433VCT3 in stock?
STM32L433VCT3 stock status must be checked for the requested quantity and date through the Request a Quote form on this page. Because availability can change quickly and different volume breaks may receive different lead times, submit the exact quantity and delivery requirements rather than relying on a generic in-stock indication. The quote response should also confirm the manufacturer name, package, and ordering code to avoid receiving an untraceable or incorrectly packaged substitute.
What is the best STMicroelectronics equivalent for STM32L433VCT3?
The closest same-brand starting point is another 256 KB STM32L4 device in the 100-pin LQFP format, such as STM32L452VCT3, provided its USB, LCD, clock, and GPIO assignments meet the design. The search for a drop-in equivalent did not establish a cross-brand part that is guaranteed to be register-, pin-, and firmware-compatible. Treat any cross-family substitution as a redesign and validate power, peripherals, boot behavior, code size, and timing before using it on an existing PCB.

엔지니어링 참조 데이터: STM32L433VCT3 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the STM32L433VCT3 when the design specifically benefits from the STM32L433VC combination of 80 MHz Cortex-M4 performance, 256 KB of Flash, 64 KB of SRAM, USB full-speed, LCD control, external SMPS support, and a 100-pin LQFP package. It is particularly appropriate for local sensor processing, connected measurement equipment, and low-power human-interface controllers. Consider the STM32L452VCT3 when the same memory class is useful and a higher 100 MHz core is justified, but validate its peripheral and pin differences. The STM32L476VCT3 and STM32L486VCT3 provide 512 KB of Flash for larger code or data, making them useful when memory is the primary constraint, but their different families must be reviewed for clocks, boot behavior, peripherals, and firmware. Because package equality alone does not prove interchangeability, use the manufacturer pin table and STM32CubeMX comparison for every approved substitution.

대체품과의 비교

파라미터 이 제품 STM32L452VCT3 STM32L476VCT3 STM32L486VCT3
Package 100-lead LQFP 100-lead LQFP - same 100-lead LQFP - same 100-lead LQFP - same
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Processor Core Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU
Maximum Core Frequency 80 MHz 100 MHz 80 MHz 80 MHz
Embedded Flash Memory 256 KB 256 KB 512 KB 512 KB
USB Interface USB full-speed USB full-speed USB full-speed USB full-speed
External SMPS Supported Supported Supported Supported

주요 차별점

  • Matches the target memory configuration while offering a different clock ceiling (vs STM32L452VCT3)
  • Provides the same package and Cortex-M4 core class (vs STM32L476VCT3)
  • Combines low-power control with a higher-capacity same-family option (vs STM32L486VCT3)

설계 노트

Configure the STM32L433VCT3 power tree from the manufacturer’s recommended supply and decoupling arrangement rather than treating all supply pins as interchangeable. Place the required ceramic capacitors at the associated package pins with short return paths, and provide adequate local bulk capacitance where the USB interface or analog peripherals create transients. Estimated: when using a 3.3 V rail, each 1 mA of additional current produces 3.3 mW of regulator or conductor loss; actual total dissipation depends on the complete supply architecture and operating mode.

Use the manufacturer’s 100-pin LQFP land pattern and pin-numbering convention, including pin 1 orientation and the thermal or exposed pad treatment specified for the exact package. Keep analog inputs away from USB, clock, and high-current switching paths, and provide a continuous ground reference beneath the MCU where the footprint permits. Validate the assembled board with continuity and polarity checks before programming because a rotated or mirrored footprint can create a short across adjacent supply pins.

Route USB D+ and D- as a short, tightly coupled pair with a continuous reference plane and impedance selected according to the USB full-speed board requirements. Avoid stubs, test-point discontinuities, and right-angle routing where equivalent controlled-impedance transitions are available. Place connector protection and common-mode components near the connector, and check differential impedance and timing with the actual PCB stack-up rather than relying on nominal dimensions.

Do not assume that every STM32L4 device in a 100-pin package is a pin-for-pin substitute. Boot configuration, oscillator requirements, supply pins, USB routing, LCD signals, debug functions, and peripheral mapping can differ even when the package count is identical. Use STM32CubeMX or STM32CubeIDE to generate and compare pin assignments, compile the existing application for the candidate, and review clock, low-power, brownout, and peripheral initialization changes before releasing replacement parts.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer product page and datasheet excerpts do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for this ordering code. AEC-Q100 is not applicable to the standard industrial STM32L433VCT3 ordering code.

데이터 검증일: 2026-11-14 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

STM32L433VCT3 STM32L433VCT3 datasheet STM32L433VCT3 datasheet pdf STM32L433VCT3 pinout STM32L433VCT3 equivalent STM32L433VCT3 replacement STM32L433VCT3 cross reference STM32L433VCT3 vs STM32L452VCT3 STM32L433VCT3 footprint STM32L433VCT3 reference manual STM32L433VCT3 price STMicroelectronics STM32L433VCT3 STM32L433 100 LQFP pinout STM32L433VCT3 application circuit

관련 부품 & 용어

STMicroelectronics STM32L433VCT3 STM32L433VC STM32L452VCT3 STM32L476VCT3 STM32L486VCT3 Arm Cortex-M4 microcontroller MCU 32-bit RISC floating-point unit FPU embedded Flash memory SRAM USB full-speed LCD controller external SMPS 100 DMIPS LQFP-100 surface mount SMD industrial sensor controller USB data acquisition human-interface controller
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기