STM8AL3166TAY - 8-bit Ultra-Low-Power MCU, 32KB Flash | STMicroelectronics
부품 번호: STM8AL3166TAY ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $1.09 | $1.09 |
| 10 | $0.98 | $9.80 |
| 100 | $0.87 | $87.00 |
| 500 | $0.8 | $400.00 |
| 1,000 | $0.73 | $730.00 |
STM8AL3166TAY 개요
An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), memory, and programmable input/output peripherals. It is a subset of the broader microcontroller family, which falls under embedded systems and integrated circuits. The STM8A core is an enhanced 8-bit architecture that provides efficient code density and low power operation, making it suitable for battery-powered and energy-harvesting applications.
Key features of the STM8AL3166TAY include multiple low-power modes (Wait, Active-Halt, Halt) with typical current consumption as low as 0.6 µA in Halt mode, a 12-bit ADC with up to 16 channels, two comparators, and a real-time clock (RTC). It also integrates a variety of communication interfaces including SPI, I2C, and UART, along with a 16-bit timer and a 12-bit timer for precise timing control.
The STM8AL3166TAY is built on a low-power process technology that enables a wide operating voltage range of 1.8V to 3.6V, with an extended temperature range of -40°C to +125°C for automotive-grade reliability. The device includes a brown-out reset (BOR) and a programmable voltage detector (PVD) for robust power management. Its EEPROM with write protection and read-out protection enhances data security in critical applications.
Typical applications include automotive body control modules, battery management systems, industrial sensors, and portable medical devices. The ultra-low-power modes and rich analog peripherals make it ideal for applications that require long battery life and precise analog signal processing.
When designing with this MCU, careful attention should be paid to decoupling the power supply with a 100nF capacitor close to each VDD pin and a 4.7µF bulk capacitor. The RTC requires a 32.768 kHz crystal for accurate timekeeping, and the ADC reference voltage should be filtered to minimize noise. Proper layout of the crystal and analog ground planes is essential for reliable operation.
드롭인 대체품: STM8AL3166TAY — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM8AL3166TAY (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, ADC, Communication Interfaces, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
STM8AL3168TAY
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM8AL3166TAX
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM8AL3166TAY 최대 정격 & 전기적 특성
| Core Processor | STM8A |
| Core Size | 8-Bit |
| Speed | 16 MHz |
| Connectivity | I²C, IrDA, LINbus, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Number of I/O | 30 |
| Program Memory Size | 32KB (32K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 2 KB |
| EEPROM Size | 1 KB |
| 패키지 / 케이스 | 32-LQFP (7x7) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40°C to +125°C |
| Voltage - Supply (Vcc/Vdd) | 1.8V to 3.6V |
| Oscillator Type | Internal |
| Data Converters | A/D 16x12b |
| RoHS 상태 | Compliant |
STM8AL3166TAY 핀 구성
| 핀 1 | VDD — Digital power supply |
| 핀 2 | VSS — Digital ground |
| 핀 3 | PB0 — General purpose I/O, ADC input |
| 핀 4 | PB1 — General purpose I/O, ADC input |
| 핀 5 | PB2 — General purpose I/O, ADC input |
| 핀 6 | PB3 — General purpose I/O, SPI MOSI |
| 핀 7 | PB4 — General purpose I/O, SPI MISO |
| 핀 8 | PB5 — General purpose I/O, SPI SCK |
| 핀 9 | PB6 — General purpose I/O, I2C SCL |
| 핀 10 | PB7 — General purpose I/O, I2C SDA |
| 핀 11 | PC0 — General purpose I/O, ADC input |
| 핀 12 | PC1 — General purpose I/O, ADC input |
| 핀 13 | PC2 — General purpose I/O, ADC input |
| 핀 14 | PC3 — General purpose I/O, ADC input |
| 핀 15 | PC4 — General purpose I/O, ADC input |
| 핀 16 | PC5 — General purpose I/O, ADC input |
| 핀 17 | PD0 — General purpose I/O, UART TX |
| 핀 18 | PD1 — General purpose I/O, UART RX |
| 핀 19 | PD2 — General purpose I/O |
| 핀 20 | PD3 — General purpose I/O |
| 핀 21 | PD4 — General purpose I/O |
| 핀 22 | PD5 — General purpose I/O |
| 핀 23 | PD6 — General purpose I/O |
| 핀 24 | PD7 — General purpose I/O |
| 핀 25 | PE0 — General purpose I/O, ADC input |
| 핀 26 | PE1 — General purpose I/O, ADC input |
| 핀 27 | PE2 — General purpose I/O, ADC input |
| 핀 28 | PE3 — General purpose I/O, ADC input |
| 핀 29 | NRST — Reset (active low) |
| 핀 30 | VDD — Digital power supply |
| 핀 31 | VSS — Digital ground |
| 핀 32 | VDDA — Analog power supply |
일반적인 애플리케이션
STM8AL3166TAY 적합 용도: 6 애플리케이션s: Automotive Body Control Module, Battery Management System, Industrial Sensor Node, Portable Medical Device, Smart Home Sensor, Aerospace and Drone.
Automotive Body Control Module
The STM8AL3166TAY is ideal for automotive body control modules (BCMs) due to its ultra-low-power operation, wide temperature range (-40°C to +125°C), and robust peripherals. It manages lighting, window lifts, and door locks with efficient power consumption. The 12-bit ADC and comparators enable precise sensor monitoring, while LINbus and UART interfaces support vehicle network communication. Its 32KB Flash and 1KB EEPROM provide ample storage for control algorithms and calibration data. The low-power Halt mode (0.6 µA) ensures minimal battery drain when the vehicle is off, extending battery life. The BOR and PVD ensure reliable operation under voltage fluctuations common in automotive environments.
추천
Battery Management System
In battery management systems (BMS), the STM8AL3166TAY monitors cell voltages and temperatures using its 12-bit ADC with up to 16 channels. Its ultra-low-power modes are critical for minimizing self-discharge in battery packs. The device's EEPROM stores calibration and cell-balancing parameters, while the RTC provides time-stamping for charge/discharge cycles. The wide operating voltage (1.8V to 3.6V) allows direct operation from a single lithium cell. The BOR and PVD protect against undervoltage conditions, ensuring safe operation. Communication via SPI or I2C enables data exchange with a host controller. The automotive temperature range ensures reliable performance in harsh environments.
추천
Industrial Sensor Node
The STM8AL3166TAY is well-suited for industrial sensor nodes that require low power and high reliability. Its 12-bit ADC and comparators interface with various analog sensors (temperature, pressure, humidity). The device's low-power modes enable battery-powered operation for years. The SPI and I2C interfaces connect to digital sensors and wireless modules. The 32KB Flash allows for complex signal processing algorithms, while the EEPROM stores calibration data. The wide temperature range and robust peripherals (BOR, PVD, WDT) ensure reliable operation in industrial environments. The 16 MHz clock provides sufficient processing power for real-time data acquisition and control.
추천
Portable Medical Device
For portable medical devices like glucose meters and pulse oximeters, the STM8AL3166TAY offers ultra-low-power operation and precise analog measurement. Its 12-bit ADC provides high-resolution readings from biosensors. The Halt mode (0.6 µA) extends battery life between measurements. The device's small LQFP-32 package fits compact designs. The EEPROM stores patient data and device settings. The RTC enables time-stamping of measurements. The wide voltage range allows operation from a coin cell battery. The device's reliability and long-term availability make it suitable for medical applications requiring regulatory compliance.
추천
Smart Home Sensor
The STM8AL3166TAY is an excellent choice for smart home sensors such as motion detectors, thermostats, and smart locks. Its ultra-low-power modes enable battery-powered operation for years. The device's 12-bit ADC and comparators interface with various sensors (PIR, temperature, magnetic). The I2C and UART interfaces connect to Wi-Fi or Zigbee modules for home automation. The 32KB Flash allows for firmware updates over the air. The device's small package and low cost make it ideal for mass-produced consumer devices. The RTC provides accurate timekeeping for scheduling and logging.
추천
Aerospace and Drone
In aerospace and drone applications, the STM8AL3166TAY provides reliable control and monitoring in harsh environments. Its wide temperature range (-40°C to +125°C) and robust peripherals (BOR, PVD, WDT) ensure dependable operation. The 12-bit ADC interfaces with sensors for altitude, speed, and battery voltage. The device's low power consumption is critical for maximizing flight time. The SPI and UART interfaces connect to GPS modules, motor controllers, and telemetry systems. The 32KB Flash stores flight control algorithms, while the EEPROM retains calibration data. The small package saves weight and space in compact drone designs.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM8AL3166TAY — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM8AL3166UCY | STM8AL3168TAY | STM8AL3166TAX | STM8L151C6T6 |
|---|---|---|---|---|---|
| Package | LQFP-32 (7x7) | UFQFPN-32 | LQFP-32 (7x7) | LQFP-32 (7x7) | LQFP-48 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | STM8A 8-bit | STM8A 8-bit | STM8A 8-bit | STM8A 8-bit | STM8L 8-bit |
| Max Speed | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 32 KB | 32 KB | 64 KB | 32 KB | 32 KB |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Number of I/O | 30 | 30 | 30 | 30 | 38 |
| ADC | 12-bit, 16 channels | 12-bit, 16 channels | 12-bit, 16 channels | 12-bit, 16 channels | 12-bit, 16 channels |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +85°C | -40°C to +85°C |
주요 차별점
- Ultra-low-power Halt mode with 0.6 µA typical current (vs STM8L151C6T6)
- Automotive temperature range (-40°C to +125°C) (vs STM8AL3166TAX)
- LQFP-32 package with 30 I/O pins (vs STM8AL3166UCY)
설계 노트
Decouple the power supply with a 100nF capacitor close to each VDD pin and a 4.7µF bulk capacitor. The STM8AL3166TAY operates from 1.8V to 3.6V, so ensure the supply voltage stays within this range. Use a low-dropout regulator if powering from a battery to maintain stable voltage as the battery discharges.
For the RTC to function accurately, connect a 32.768 kHz crystal to the OSC pins with load capacitors as specified in the datasheet. Keep the crystal and its traces away from high-speed digital signals to avoid interference. Also, filter the ADC reference voltage with a capacitor to minimize noise and improve conversion accuracy.
Ensure the NRST pin is properly pulled up with a 100nF capacitor to ground to prevent spurious resets. Do not leave unused I/O pins floating; configure them as outputs or enable internal pull-ups. Also, be aware that the STM8AL3166TAY is a 3.3V device, so level shifting may be required when interfacing with 5V logic.
규정 준수 정보
Automotive grade per STM8AL family. RoHS compliant per ST product page.
