STM8AL3L46TCY - 8-Bit 16MHz Automotive MCU, 16KB Flash | STMicroelectronics
부품 번호: STM8AL3L46TCY ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.28 | $2.28 |
| 10 | $2.05 | $20.50 |
| 100 | $1.82 | $182.00 |
| 500 | $1.64 | $820.00 |
| 1,000 | $1.45 | $1,450.00 |
STM8AL3L46TCY 개요
An 8-bit microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable input/output peripherals. The STM8A core is an 8-bit CISC architecture optimized for low power consumption and high code density, making it ideal for cost-sensitive embedded control applications. In the hierarchy of embedded systems, an MCU sits between simple logic ICs and complex application processors, providing a self-contained computing platform for real-time control tasks. The STM8AL3L46TCY belongs to the STM8A family, which is specifically designed for automotive body electronics, sensor interfaces, and battery management systems.
Key features of the STM8AL3L46TCY include an integrated LCD driver supporting up to 4x28 segments, a 12-bit analog-to-digital converter (ADC) with up to 16 channels, and multiple communication interfaces including I2C, SPI, and UART. The device also incorporates a low-power RTC, a watchdog timer, and a brown-out reset circuit. Its ultra-low-power modes, including Halt, Active-Halt, and Wait modes, enable significant battery life extension in portable and automotive applications. The 32-pin LQFP package provides a compact footprint while offering sufficient I/O pins for peripheral integration.
From a technical architecture perspective, the STM8AL3L46TCY utilizes a Harvard architecture with separate instruction and data buses, allowing simultaneous instruction fetch and data access. The CPU core operates at up to 16MHz, delivering 16 MIPS throughput. The Flash memory is programmable in-system via the SWIM (Single Wire Interface Module) debug interface, facilitating firmware updates in the field. The integrated EEPROM provides non-volatile data storage for calibration parameters and system configuration, with endurance of up to 300k write/erase cycles.
Typical applications for the STM8AL3L46TCY include automotive body control modules, smart sensors, battery management systems, and dashboard displays. Its combination of low power consumption, integrated LCD driver, and automotive qualification (AEC-Q100) makes it particularly suitable for in-vehicle infotainment, climate control panels, and tire pressure monitoring systems. The device's robust communication interfaces enable seamless integration with other automotive ECUs via CAN or LIN networks.
When designing with this MCU, careful attention should be paid to power supply decoupling and PCB layout to minimize noise and ensure reliable operation. The SWIM debug interface should be brought out to a test point for programming and debugging. Additionally, the LCD driver requires proper configuration of the contrast control register and external bias resistors to achieve optimal display performance.
드롭인 대체품: STM8AL3L46TCY — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM8AL3L46TCY (동일 폼 팩터 및 풋프린트) — 차이점: Package, Communication Interfaces, Operating Temperature, RAM Size, Supply Voltage Range.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
STM8AL3L46TAY
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM8AL3L48TCY
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM8AL3L46TCY
✅ 드롭인✓ 재고 있음
$1.45 / 개
데이터시트 보기 →STM8AL3L46TAY
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM8AL3L48TCY
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM8AL3L46TCY 최대 정격 & 전기적 특성
| Core Processor | STM8A |
| Core Size | 8-Bit |
| Speed | 16MHz |
| Program Memory Size | 16KB (16K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 2KB |
| EEPROM Size | 1KB |
| Number of I/O | 26 |
| Connectivity | I2C, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, DMA, LCD, POR, PWM, WDT |
| Number of A/D Converters | 1 |
| A/D Converter Resolution | 12-bit |
| Number of A/D Channels | 16 |
| Oscillator Type | Internal |
| Operating Voltage | 1.8V to 3.6V |
| 동작 온도 | -40°C to +125°C |
| 패키지 | 32-LQFP (7x7mm) |
| 실장 유형 | Surface Mount |
| Automotive Qualification | AEC-Q100 |
| RoHS 상태 | Compliant |
STM8AL3L46TCY 핀 구성
| 핀 1 | VDD — Power supply |
| 핀 2 | VSS — Ground |
| 핀 3 | PA0 — General purpose I/O / ADC input |
| 핀 4 | PA1 — General purpose I/O / ADC input |
| 핀 5 | PA2 — General purpose I/O / ADC input |
| 핀 6 | PA3 — General purpose I/O / ADC input |
| 핀 7 | PA4 — General purpose I/O / ADC input |
| 핀 8 | PA5 — General purpose I/O / ADC input |
| 핀 9 | PA6 — General purpose I/O / ADC input |
| 핀 10 | PA7 — General purpose I/O / ADC input |
| 핀 11 | PB0 — General purpose I/O / SPI MOSI |
| 핀 12 | PB1 — General purpose I/O / SPI MISO |
| 핀 13 | PB2 — General purpose I/O / SPI SCK |
| 핀 14 | PB3 — General purpose I/O / SPI NSS |
| 핀 15 | PB4 — General purpose I/O / I2C SCL |
| 핀 16 | PB5 — General purpose I/O / I2C SDA |
| 핀 17 | PB6 — General purpose I/O / UART TX |
| 핀 18 | PB7 — General purpose I/O / UART RX |
| 핀 19 | PC0 — General purpose I/O / ADC input |
| 핀 20 | PC1 — General purpose I/O / ADC input |
| 핀 21 | PC2 — General purpose I/O / ADC input |
| 핀 22 | PC3 — General purpose I/O / ADC input |
| 핀 23 | PC4 — General purpose I/O / ADC input |
| 핀 24 | PC5 — General purpose I/O / ADC input |
| 핀 25 | PC6 — General purpose I/O / ADC input |
| 핀 26 | PC7 — General purpose I/O / ADC input |
| 핀 27 | PD0 — General purpose I/O / LCD segment |
| 핀 28 | PD1 — General purpose I/O / LCD segment |
| 핀 29 | PD2 — General purpose I/O / LCD segment |
| 핀 30 | PD3 — General purpose I/O / LCD segment |
| 핀 31 | NRST — Reset (active low) |
| 핀 32 | SWIM — Single wire interface module for debug |
일반적인 애플리케이션
STM8AL3L46TCY 적합 용도: 6 애플리케이션s: Automotive Body Control Module, Battery Management System, Smart Sensor Interface, Dashboard Display, Tire Pressure Monitoring System, Industrial Control.
Automotive Body Control Module
The STM8AL3L46TCY is ideal for automotive body control modules (BCMs) that manage lighting, windows, and door locks. Its AEC-Q100 qualification ensures reliable operation in harsh automotive environments, while the integrated LCD driver can directly interface with dashboard displays. The 12-bit ADC and multiple communication interfaces (I2C, SPI, UART) enable seamless integration with sensors and actuators. The ultra-low-power modes extend battery life in standby conditions, critical for always-on automotive systems. The 16MHz core provides sufficient processing power for real-time control loops, and the 16KB Flash is adequate for BCM firmware. The wide operating voltage range (1.8V to 3.6V) accommodates automotive battery voltage variations. The 32-pin LQFP package fits compact PCB layouts, and the SWIM debug interface simplifies firmware development and field updates.
추천
Battery Management System
The STM8AL3L46TCY is well-suited for battery management systems (BMS) in electric vehicles and hybrid vehicles. Its 12-bit ADC with 16 channels can monitor individual cell voltages and temperatures, while the low-power modes ensure minimal battery drain during idle periods. The integrated EEPROM stores calibration data and battery parameters, and the I2C interface connects to external battery monitoring ICs. The AEC-Q100 qualification guarantees reliable operation in the demanding automotive environment. The 16MHz core handles real-time battery state-of-charge calculations, and the 16KB Flash is sufficient for BMS algorithms. The wide operating voltage range (1.8V to 3.6V) allows direct connection to the battery pack, and the compact 32-pin LQFP package fits space-constrained BMS PCBs. The watchdog timer enhances system reliability by resetting the MCU in case of firmware hangs.
추천
Smart Sensor Interface
The STM8AL3L46TCY is an excellent choice for smart sensor interfaces in automotive and industrial applications. Its 12-bit ADC with 16 channels can directly interface with analog sensors, while the I2C and SPI interfaces connect to digital sensors. The ultra-low-power modes enable battery-powered wireless sensor nodes, and the integrated LCD driver can display sensor readings locally. The AEC-Q100 qualification makes it suitable for automotive sensor modules, and the wide operating temperature range (-40°C to +125°C) ensures reliable operation in extreme environments. The 16MHz core processes sensor data in real-time, and the 16KB Flash is sufficient for sensor fusion algorithms. The compact 32-pin LQFP package fits small sensor modules, and the SWIM debug interface simplifies firmware development. The brown-out reset circuit ensures reliable startup and operation.
추천
Dashboard Display
The STM8AL3L46TCY is ideal for dashboard displays in automotive vehicles. Its integrated LCD driver supports up to 4x28 segments, enabling direct connection to a segmented LCD without external driver ICs. The 16MHz core handles display refresh and user input processing, while the UART interface communicates with the main ECU. The AEC-Q100 qualification ensures reliable operation in the automotive environment, and the wide operating temperature range (-40°C to +125°C) accommodates extreme cabin temperatures. The ultra-low-power modes extend battery life when the vehicle is off, and the 16KB Flash is sufficient for display firmware. The compact 32-pin LQFP package fits behind the dashboard, and the SWIM debug interface simplifies firmware updates. The brown-out reset circuit ensures reliable startup when the ignition is turned on.
추천
Tire Pressure Monitoring System
The STM8AL3L46TCY is well-suited for tire pressure monitoring systems (TPMS) in automotive vehicles. Its ultra-low-power modes enable battery-powered operation for years, and the 12-bit ADC can interface with pressure sensors. The integrated EEPROM stores calibration data and sensor IDs, and the UART interface communicates with the vehicle's central TPMS receiver. The AEC-Q100 qualification ensures reliable operation in the harsh tire environment, and the wide operating temperature range (-40°C to +125°C) accommodates extreme temperatures. The 16MHz core processes pressure data in real-time, and the 16KB Flash is sufficient for TPMS firmware. The compact 32-pin LQFP package fits inside the tire pressure sensor module, and the SWIM debug interface simplifies firmware development. The watchdog timer enhances system reliability.
추천
Industrial Control
The STM8AL3L46TCY is suitable for industrial control applications such as motor control, process control, and automation. Its 12-bit ADC with 16 channels can interface with various sensors, and the PWM outputs can drive motors and actuators. The I2C, SPI, and UART interfaces enable communication with other industrial devices. The wide operating voltage range (1.8V to 3.6V) accommodates various power supplies, and the extended temperature range (-40°C to +125°C) ensures reliable operation in industrial environments. The 16MHz core handles real-time control loops, and the 16KB Flash is sufficient for control algorithms. The compact 32-pin LQFP package fits industrial PCBs, and the SWIM debug interface simplifies firmware development. The brown-out reset circuit ensures reliable startup and operation.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM8AL3L46TCY — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM8AL3L46TAY | STM8AL3L48TCY |
|---|---|---|---|
| Package | 32-LQFP (7x7mm) | 32-LQFP (7x7mm) | 32-LQFP (7x7mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | STM8A | STM8A | STM8A |
| Speed | 16MHz | 16MHz | 16MHz |
| Flash Memory | 16KB | 16KB | 32KB |
| RAM | 2KB | 2KB | 2KB |
| EEPROM | 1KB | 1KB | 1KB |
| ADC Resolution | 12-bit | 12-bit | 12-bit |
| LCD Driver | Yes (4x28) | Yes (4x28) | Yes (4x28) |
| Automotive Grade | AEC-Q100 | AEC-Q100 | AEC-Q100 |
주요 차별점
- Integrated LCD driver supporting up to 4x28 segments (vs STM8AL3L46TAY)
- AEC-Q100 automotive qualification (vs STM8AL3L46TAY)
- Ultra-low-power modes for battery-powered applications (vs STM8AL3L46TAY)
설계 노트
The STM8AL3L46TCY operates from 1.8V to 3.6V. Use a 100nF ceramic capacitor close to each VDD pin and a 4.7uF bulk capacitor for decoupling. For battery-powered applications, consider using the low-power modes (Halt, Active-Halt, Wait) to extend battery life. Ensure the power supply can handle the peak current during Flash programming or LCD switching.
For the 32-pin LQFP package, ensure proper PCB layout with a solid ground plane. Place decoupling capacitors as close to the VDD pins as possible. For the SWIM debug interface, keep the trace short and add a series resistor (e.g., 1kΩ) to protect against ESD. For the LCD driver, route the segment and common lines away from high-speed digital signals to minimize noise.
When using the integrated LCD driver, ensure the contrast control register is configured correctly and external bias resistors are placed as specified in the datasheet. Do not exceed the absolute maximum ratings for VDD (4.0V) or the I/O pins. For the ADC, use a stable reference voltage and consider adding a filter capacitor on the VREF pin. The brown-out reset circuit should be enabled to ensure reliable startup.
규정 준수 정보
AEC-Q100 qualified per STMicroelectronics product page. RoHS compliant per distributor listings.
