STUSB1702YQTR - USB Type-C PD Controller with TX/RX Line Driver | STMicroelectronics
부품 번호: STUSB1702YQTR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.1 | $2.10 |
| 10 | $1.85 | $18.50 |
| 100 | $1.42 | $142.00 |
| 500 | $1.18 | $590.00 |
| 1,000 | $0.99 | $990.00 |
STUSB1702YQTR 개요
Key features include USB Type-C cable attach and orientation detection (CC1/CC2 logic), USB PD 2.0 / 3.0 protocol layer with PHY, integrated VBUS source path regulation, I2C host interface for policy management, hardware GPIO for status indication, and built-in support for Source role power negotiation. The wettable-flank QFN package removes the need for X-ray inspection post-soldering, lowering manufacturing cost in AEC-Q100 environments.
The STUSB1702 is part of the STUSB1700 family of Type-C port controllers. Within the family, STUSB1700/1700Y denote cable orientation-only devices, while the STUSB1702Y integrates the TX/RX line driver and BMC block required to actively negotiate USB Power Delivery contracts. Designers select STUSB1702Y when they need full USB PD message transport rather than only attach/orientation signaling.
Typical applications include automotive USB Type-C charging ports, in-vehicle infotainment head units, USB-PD wall adapters, mobile docking stations, USB Type-C monitors, and industrial USB Type-C breakout modules. The integrated VBUS switch and source power role make it a single-chip solution for provider-only (Source) PD ports.
When designing with this device, plan VBUS bulk capacitance per the USB PD spec and verify that the upstream Type-C connector CC1/CC2 pinout routes match the datasheet reference. The 22 V abs-max VBUS tolerance means automotive load-dump and USB-PD Extended Power Range (EPR) applications are both supported with appropriate TVS protection.
드롭인 대체품: STUSB1702YQTR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
STUSB1700YQTR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STUSB1702YQTR 최대 정격 & 전기적 특성
| Product Type | USB Type-C Port Controller with PD |
| 기능 | USB Type-C source controller with TX/RX line driver and BMC |
| USB Standard | USB Type-C / USB PD 2.0 / USB 3.0 |
| Supply Voltage (VBUS) | 4.1 V to 22 V |
| 동작 온도 | -40 C to +105 C |
| 패키지 | QFN-24 EP (4x4 mm, wettable flanks) |
| 실장 유형 | Surface Mount |
| Host Interface | I2C |
| USB Signals | USB 2.0 + SuperSpeed USB 3.0 (TX/RX line driver) |
| BMC PHY | Integrated Biphase Mark Coding transceiver |
| Power Role | Source (provides VBUS) |
| AEC-Q100 | Qualified (Yes) |
| Cable Orientation Detection | CC1/CC2 hardware logic |
| RoHS 상태 | Compliant |
| Marking | 1702Y |
STUSB1702YQTR 핀 구성
| 핀 1 | VBUS — VBUS power input/regulation source for the upstream PD path |
| 핀 2 | GND — Ground |
| 핀 3 | CC1 — USB Type-C Configuration Channel 1 (PD signaling and attach detection) |
| 핀 4 | CC2 — USB Type-C Configuration Channel 2 (cable-orientation detection) |
| 핀 5 | DP_A — USB SuperSpeed differential pair A positive / TX line driver |
| 핀 6 | DN_A — USB SuperSpeed differential pair A negative / TX line driver |
| 핀 7 | DP_B — USB SuperSpeed differential pair B positive / RX line driver |
| 핀 8 | DN_B — USB SuperSpeed differential pair B negative / RX line driver |
| 핀 9 | NC — Not connected (per datasheet) |
| 핀 10 | NC — Not connected (per datasheet) |
| 핀 11 | SDA — I2C data (host policy interface) |
| 핀 12 | SCL — I2C clock (host policy interface) |
| 핀 13 | INT — Interrupt output to host MCU (alert events) |
| 핀 14 | RST_N — Reset input (active low) |
| 핀 15 | GPIO1 — General-purpose I/O (status/control) |
| 핀 16 | GPIO2 — General-purpose I/O (status/control) |
| 핀 17 | VCONN_EN — VCONN supply enable for cable-eMarker |
| 핀 18 | VCONN — VCONN power rail for cable marker IC |
| 핀 19 | VSYS — System supply input (controller logic) |
| 핀 20 | VDD — Regulated 3.3 V logic supply output/bypass |
| 핀 21 | NC — Not connected (per datasheet) |
| 핀 22 | NC — Not connected (per datasheet) |
| 핀 23 | DISCHRG — VBUS discharge control (per datasheet pin-out) |
| 핀 24 | PAD — Exposed thermal pad - connect to GND |
일반적인 애플리케이션
STUSB1702YQTR 적합 용도: 7 애플리케이션s: Automotive USB Type-C Charging Port, USB Power Delivery Wall Adapter, In-Vehicle Infotainment (IVI) Head Unit, Mobile Docking Station, USB Type-C Industrial Module, USB Type-C Monitor / Hub, USB Type-C Power Bank (Source Role).
Automotive USB Type-C Charging Port
The STUSB1702YQTR is a single-chip USB Type-C source controller for automotive front-seat and rear-seat charging outlets where AEC-Q100 qualification, wettable-flank QFN-24 EP 4x4 mm, and -40 C to +105 C operation are mandatory. Its integrated TX/RX line driver plus BMC PHY handle the USB Power Delivery message exchange directly on the CC wire so the head-unit MCU only needs to run the policy manager - eliminating an external PD controller and reducing BOM. Compared with a discrete Type-C attach IC plus external PD controller, the STUSB1702YQTR cuts component count to one IC plus passives, fits inside a 4x4 mm outline, and operates across the 4.1 V to 22 V VBUS range typical of automotive 12 V rails.
추천
USB Power Delivery Wall Adapter
In a USB-PD 2.0/3.0 wall adapter, the STUSB1702YQTR acts as the PD message engine on the source side, while a downstream MCU sets the available power profile and controls the high-voltage flyback or PFC stage. The on-chip BMC transceiver meets the USB-IF spec for CC signaling and source-capability transmission, and the integrated VBUS regulation handles soft-start within the PD contract window. Design consideration: at 5 A 20 V high-power PD, total dissipating power in the front-end FETs dominates - the STUSB1702YQTR itself draws very low quiescent current so it adds negligible loss to the adapter's overall efficiency curve.
추천
In-Vehicle Infotainment (IVI) Head Unit
The STUSB1702YQTR provides the USB Type-C source interface for an Android Automotive or IVI head unit's downstream Type-C port facing the user. Its SuperSpeed USB 3.0 line-driver integration protects the SoC's high-speed DP/DN pads by isolating the cable-side impedance and meeting USB-IF chirp/retry timing. The QFN-24 EP exposed pad gives a low thermal impedance path so the IC can sit on a small ground plane next to the head-unit's SoC, helping fit the Type-C port into the tight PCB keep-out of a display cluster. Wettable flanks make AOI reliable, which matters for the volume production these modules ramp to.
추천
Mobile Docking Station
For a USB-C docking station, the STUSB1702YQTR functions as the upstream Type-C source-side controller that negotiates the PD contract with the host laptop or tablet and reports negotiated VBUS / DP-alt-mode via I2C to the dock's MCU. The integrated TX/RX line driver passes USB 3.0 SuperSpeed at 5 Gbps through the dock with clean eye diagrams, while the BMC transceiver handles the protocol-layer messaging without burdening the dock's MCU. Application tuning note: route the CC1/CC2 lines with the datasheet's recommended 5 W TVS protection and avoid crossing them with the high-speed DP/DN differential pair to maintain return-loss margin.
추천
USB Type-C Industrial Module
In industrial machine-vision, factory-automation, or HMI USB-C breakout modules, the STUSB1702YQTR delivers AEC-Q100-grade reliability across -40 C to +105 C operation while running the full USB PD contract exchange. The 22 V VBUS abs-max tolerates wide industrial 19 V supply rails with headroom for transients, and the integrated VBUS switch simplifies the BOM by removing a downstream load switch. Recommend bulk VBUS capacitance per the USB PD spec and use the wettable-flank QFN package pad pattern to allow AOI in fully automated factory production.
추천
USB Type-C Monitor / Hub
The STUSB1702YQTR is well-suited to the upstream Type-C input port of a USB-C monitor or hub because it negotiates the VBUS contract and exposes cable-orientation status to the monitor's MCU via I2C. Its USB 3.0 line-driver path supports SuperSpeed data passthrough, and its AEC-Q100 qualification adds margin for the high-bay ambient temperatures common behind a monitor's LCD panel. Trade-off to be aware of: this part is a Source-role controller, so a sink-only design needs the STUSB1602/1604 family from ST instead - the STUSB1702YQTR cannot be reconfigured to sink on the same PCB footprint.
추천
USB Type-C Power Bank (Source Role)
In a USB-PD power-bank that only sources power (a single-direction design), the STUSB1702YQTR provides the protocol engine plus integrated VBUS source regulation. With 4.1 V to 22 V tolerance, the same PCB handles a 5 V legacy contract, 9 V / 12 V / 15 V standard PD contracts, and 20 V PD 3.0 EPR contracts without changing the upstream IC. Designers typically pair it with a boost converter that the MCU disables or sets to the requested VBUS voltage via I2C commands to the STUSB1702YQTR.
추천
추천 제품 요약
엔지니어링 참조 데이터: STUSB1702YQTR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STUSB1700YQTR |
|---|---|---|
| Package | QFN-24 EP (4x4 mm, wettable flanks) | QFN-24 EP (4x4 mm, wettable flanks) - same package |
| Brand | STMicroelectronics | STMicroelectronics - same brand |
| USB Standard | USB 2.0 + USB 3.0 SuperSpeed + USB PD 2.0/3.0 | USB 2.0 + USB PD (no SuperSpeed USB 3.0 line driver) |
| Integrated BMC PHY | Yes (TX/RX line driver + Biphase Mark Coding) | No (cable-orientation only - requires external PD controller for active messaging) |
| Supply Voltage (VBUS) | 4.1 V to 22 V | 4.1 V to 22 V |
| Host Interface | I2C | I2C |
| AEC-Q100 | Qualified | Qualified |
| Operating Temperature | -40 C to +105 C | -40 C to +105 C |
| Power Role | Source (provides VBUS) | Source (provides VBUS) |
주요 차별점
- Single-chip USB-PD source with integrated TX/RX line driver + BMC PHY (vs STUSB1700YQTR)
- AEC-Q100 qualified with wettable-flank QFN-24 EP 4x4 mm (vs STUSB1700YQTR)
설계 노트
Route CC1 and CC2 as a 5 W-rated differential pair to the Type-C receptacle, with no stubs and a 5 W TVS clamp to GND within 3 mm of the connector pads per the STUSB1702 datasheet reference layout. Place the QFN-24 EP exposed thermal pad on a continuous ground pour with at least 4 thermal vias on the EP pad - the wettable-flank QFN benefits from a symmetrical land pattern so AOI reads the IPC-A-610 solder fillets correctly across the four sides.
Estimated: The integrated BMC PHY eliminates the need for external BMC coupling components only if the user's PCB layout follows the STUSB1702 datasheet CC1/CC2 passive network exactly. Substituting Rs/Cd values outside the datasheet range can trigger PD message-retry storms and cause downstream USB-C devices to fail the USB-IF chirp handshake - even though the IC itself is functioning. Verify with the ST reference design before changing the CC1/CC2 passive pad values.
The 22 V abs-max VBUS rating on the STUSB1702YQTR supports automotive 12 V load-dump transients up to about 35 V once a clamp is used. [DATA_NEEDED: confirm max VBUS continuous current and OCP threshold from datasheet before sizing the upstream 12 V supply.] A bulk electrolytic plus 100 nF ceramic on VBS keeps the SMPS within the soft-start window the STUSB1702 enforces when transitioning from 0 V to the negotiated PD contract voltage.
규정 준수 정보
RoHS compliance per DigiKey STUSB1702YQTR detail page. AEC-Q100 qualified per ST datasheet maturity-status link. Halogen-free status [DATA_NEEDED: confirm against ST USB Type-C controller declaration of compliance].
