Microchip Technology

SY89529LZH - 200MHz Spread-Spectrum Clock | Microchip

부품 번호: SY89529LZH ✗ 단종
3.135 V to 3.465 V Vdss 28-pin SOIC Package 200 MHz Speed
MOQ: 1 |

SY89529LZH 개요

The Microchip SY89529LZH is a 3.3 V precision spread-spectrum clock synthesizer that generates a 200 MHz LVPECL output from a 16.66 MHz crystal reference. It is packaged in a 28-pin SOIC and includes a phase-locked loop with programmable spread-spectrum modulation control. The device operates from 3.135 V to 3.465 V and provides LVTTL and LVCMOS-compatible input and output options.

A clock synthesizer is an integrated timing device that converts a stable reference frequency into one or more controlled output frequencies. The SY89529 belongs to the hierarchy of clock and frequency synthesizer ICs, PLL-based clock generators, and timing-control semiconductors. Its spread-spectrum operation varies the output frequency over time, reducing energy concentration at a single clock frequency and helping lower radiated emissions from systems that use the clock as a data source.

Key features include a maximum output frequency of 200 MHz, a PLL architecture, a crystal-based reference input, and LVPECL clock output. The spread-spectrum modulation is adjustable up to 0.5%, while spread-spectrum modulation can provide a 7 dB reduction in EMI. These characteristics make the device useful where both precise edge placement and controlled spectral spreading are required.

The SY89529 uses a PLL to develop a high-frequency clock from the 16.66 MHz crystal source. This architecture permits the synthesizer to produce a much higher output frequency than its reference while maintaining a controlled relationship between input and output edges. The LVPECL output is suited to high-speed digital systems operating on a low-voltage positive-referenced ECL level, whereas the LVTTL and LVCMOS-compatible interfaces broaden the supported logic environment.

Typical uses include processor and communications-clock distribution, high-speed serial links, network interface equipment, and embedded systems requiring reduced electromagnetic emissions. The 200 MHz LVPECL output can feed retimers, serializers, FPGAs, or other clock-domain components. The 28-pin SOIC package permits conventional surface-mount assembly, although careful decoupling and controlled-impedance routing remain essential at 200 MHz.

Designers should follow the manufacturer datasheet for reference-crystal selection, loop-filter recommendations, power-supply sequencing, and output termination. LVPECL outputs generally require an appropriate termination network and compatible biasing arrangement. PCB placement should minimize clock-loop area, keep the crystal path compact, and provide low-impedance ground and power-return paths to limit jitter and radiated emissions.

This product summary consolidates the device specifications, lifecycle status, application guidance, and design considerations engineers need to evaluate the SY89529LZH for spread-spectrum clock generation.

드롭인 대체품: SY89529LZH — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

SY89529LZH 사양

Device Type Precision spread-spectrum clock synthesizer
Supply Voltage Range 3.135 V to 3.465 V
Nominal Supply Voltage 3.3 V
Maximum Output Frequency 200 MHz
Reference Crystal Frequency 16.66 MHz
PLL Yes
Primary Clock Output LVPECL
Logic Compatibility LVTTL and LVCMOS compatible
Maximum Spread-Spectrum Modulation 0.5%
EMI Reduction 7 dB with spread-spectrum modulation
Number of Circuits 1
패키지 28-pin SOIC
Package Width 7.50 mm
실장 유형 Surface mount
Shipping Package Tube
Product Series Precision Edge
Product Status Obsolete

SY89529LZH tube 핀 구성 가이드

SY89529LZH(tube 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

SY89529LZH의 tube 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: SY89529LZH.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

SY89529LZH 적합 용도: 6 애플리케이션s: High-Speed Serial Communications, Processor and FPGA Clock Distribution, Network Interface Equipment, EMI-Controlled Digital Systems, High-Speed Data Conversion and Retiming, Legacy Industrial Control Platforms.

🌐

High-Speed Serial Communications

The SY89529LZH fits high-speed serial communications equipment that needs a stable 200 MHz LVPECL clock while limiting narrowband EMI concentration. Its PLL multiplies a 16.66 MHz crystal reference to the specified 200 MHz output, and spread-spectrum modulation can shift energy across a controlled frequency range with modulation up to 0.5%. Place the output near the serializer or retimer, use the termination network specified in the manufacturer application circuit, and preserve a continuous ground return. Spread-spectrum operation can lower a measured emissions peak by the stated 7 dB under suitable system conditions, although cable, connector, and enclosure resonances still require separate control.

🖥️

Processor and FPGA Clock Distribution

The SY89529LZH is appropriate for clock distribution into processor, FPGA, or high-speed ASIC systems operating near the 200 MHz maximum output of the device. A PLL-based design provides a controlled relationship between the 16.66 MHz reference and the generated LVPECL clock, while the adjustable spread-spectrum control can reduce the spectral peak of a repetitive clock. The clock net should use a short, impedance-controlled route with a defined termination arrangement and minimal stubs. Because the output is LVPECL rather than a conventional CMOS clock, the receiving device must support the required levels and termination topology.

🌐

Network Interface Equipment

Network interface equipment can use the SY89529LZH when a common 200 MHz reference clock is needed by multiple high-speed paths and reduced spectral concentration is valuable. The 3.3 V supply requirement and 28-pin SOIC package fit conventional mixed-signal board assembly, while the LVPECL output supports compatible high-speed clock receivers. Engineers should establish a low-impedance distribution topology, isolate the oscillator reference from noisy switching stages, and avoid adding unnecessary branch stubs. EMI reduction depends on the modulation setting, clock amplitude, trace impedance, enclosure seams, and connector filters, so the stated 7 dB improvement should be treated as a device-level characteristic rather than a guaranteed system-level result.

🔧

EMI-Controlled Digital Systems

The SY89529LZH is useful in digital systems where a fixed-frequency clock would create a strong spectral peak in an emissions measurement. Its spread-spectrum modulation control reaches 0.5%, allowing clock energy to spread across nearby frequencies while the PLL maintains a controlled relationship with the 16.66 MHz reference. The device can therefore help reduce emissions sensitivity without abandoning a precise 200 MHz clock. To obtain predictable results, configure the modulation using the manufacturer guidance, preserve a short crystal path, decouple the 3.3 V supply locally, and apply the specified LVPECL termination. System verification should include both time-domain clock-quality checks and spectral emissions measurements.

📺

High-Speed Data Conversion and Retiming

The SY89529LZH can supply a 200 MHz LVPECL reference to high-speed data-conversion, retiming, or serialization paths that require stable edge placement and controlled spectral occupancy. The PLL-based architecture produces the high-rate output from a low-frequency crystal reference, while spread-spectrum modulation offers an additional mechanism for reducing narrowband EMI. The clock should be routed as a controlled-impedance transmission line with the termination arrangement required by the receiver interface. Supply and ground planes must provide low-inductance return paths close to the device, and the reference oscillator area should remain physically separated from switching power stages and high-current output circuitry to minimize jitter coupling.

🏭

Legacy Industrial Control Platforms

The SY89529LZH is suitable for a legacy industrial control platform that still relies on its established 200 MHz LVPECL clock architecture and requires controlled spread-spectrum operation for emissions management. The 3.135 V to 3.465 V operating range and 28-pin SOIC package support repair, qualification, or continuation of an existing board design. Because the device is obsolete, engineers should document whether the application requires an exact replacement, a functional redesign, or a last-time-buy arrangement. Any replacement program must validate clock frequency, LVPECL levels, jitter, spread-spectrum behavior, crystal startup, and electromagnetic-emissions performance rather than relying only on a nominal maximum-frequency comparison.

추천 제품 요약

SY89529LZH Microchip Technology 사용처: High-Speed Serial Communications, Processor and FPGA Clock Distribution, Network Interface Equipment, EMI-Controlled Digital Systems, High-Speed Data Conversion and Retiming, Legacy Industrial Control Platforms SY89529 Related precision clock synthesizer family 사용처: High-Speed Serial Communications, Processor and FPGA Clock Distribution, Network Interface Equipment, EMI-Controlled Digital Systems, High-Speed Data Conversion and Retiming, Legacy Industrial Control Platforms
What is the SY89529LZH clock synthesizer?
The SY89529LZH is a 3.3 V precision spread-spectrum clock synthesizer that generates a 200 MHz LVPECL clock from a 16.66 MHz crystal reference. According to the Micrel Semiconductor datasheet, the device uses a PLL and includes adjustable spread-spectrum modulation up to 0.5%. It is intended for high-speed systems requiring precise edge placement, controlled spectral spreading, and reduced radiated EMI.
What are the key specifications of SY89529LZH that engineers should know?
The SY89529LZH combines a 200 MHz maximum output frequency, 3.3 V operation, PLL-based frequency multiplication, and LVPECL output in a 28-pin SOIC. The Micrel Semiconductor datasheet also identifies a 16.66 MHz crystal reference, spread-spectrum modulation up to 0.5%, and a stated 7 dB EMI reduction. These are the central parameters for clocking, board-layout, and signal-integrity assessments.
Where can I download the SY89529LZH datasheet PDF?
The official SY89529LZH datasheet PDF is available from Microchip Technology at the device-document link listed on this page. The document describes the 3.3 V precision spread-spectrum clock synthesizer, including its PLL, 200 MHz LVPECL output, spread-spectrum controls, and recommended application information. Use the manufacturer PDF as the controlling reference for pin functions, electrical limits, and circuit recommendations.
Where can I find the SY89529LZH pinout?
The SY89529LZH pinout is shown in the official Micrel Semiconductor datasheet on this page. The component uses a 28-pin SOIC package, so assignments must be made against that package rather than a generic SOIC outline. Follow the pin-description table and application examples when assigning crystal, power, ground, feedback, and LVPECL output connections on the PCB.
Is the SY89529LZH suitable for EMI-sensitive communications equipment?
Yes, the SY89529LZH is suitable when a system benefits from controlled spread-spectrum clocking. The Micrel Semiconductor datasheet specifies spread-spectrum modulation up to 0.5% and a 7 dB EMI reduction, while retaining a 200 MHz LVPECL output. Actual emissions performance still depends on clock amplitude, termination, trace geometry, connector design, and the enclosure around the finished equipment.
How does spread-spectrum modulation help the SY89529LZH reduce EMI?
Spread-spectrum modulation reduces EMI by shifting clock energy across a range of frequencies instead of concentrating it at one narrow frequency. The Micrel Semiconductor datasheet identifies adjustable modulation up to 0.5% and a 7 dB reduction in EMI. The technique can lower narrowband emissions peaks, but it does not eliminate the need for controlled-impedance routing, proper termination, filtering, or shielding.
What crystal frequency does the SY89529LZH use?
The SY89529LZH uses a 16.66 MHz crystal reference to support generation of its 200 MHz LVPECL output. The Micrel Semiconductor datasheet describes the device as a low-cost 16.66 MHz crystal-based precision clock synthesizer. Crystal load, ESR, drive level, and layout requirements should be checked against the manufacturer guidance before production release.
What is the difference between LVPECL and LVTTL clock outputs?
LVPECL uses a low-voltage positive-referenced emitter-coupled logic interface, while LVTTL and LVCMOS use conventional CMOS-compatible voltage levels. The SY89529LZH is identified primarily as an LVPECL clock generator with LVTTL and LVCMOS-compatible interfaces. The correct output termination and receiver thresholds must be selected from the circuit described in the manufacturer datasheet.
When should I choose the SY89529LZH over a conventional fixed-frequency clock?
Choose the SY89529LZH when the design requires both a high-frequency clock and adjustable spread-spectrum modulation. Its 200 MHz LVPECL output and stated 7 dB EMI reduction are more relevant to emissions-sensitive serial links and communications equipment than a basic fixed-frequency oscillator. If only one static frequency is needed, the PLL and spread-spectrum features add unnecessary complexity.
Is the SY89529LZH the same as SY89529LTH?
The SY89529LZH and SY89529LTH belong to the same SY89529 device family and are listed with the same clock-synthesizer category, packaging information, and obsolete product status. Their order-code suffix differences primarily concern how the device is supplied rather than introducing a different clock frequency. Verify the exact ordering code, package form, and assembly requirements before treating one as a substitution for the other.
What is the best drop-in replacement for the SY89529LZH?
No independently verified drop-in replacement for the SY89529LZH is established by the available cross-reference information. The SY89529LTH and tape-and-reel ordering variants identify related order codes, but they do not provide enough verified differentiation to serve as substantive engineering alternatives. Because the original part is obsolete, use the manufacturer cross-reference service or contact XAIPART through the Request a Quote form for an application-specific sourcing review.
Where can I buy the obsolete SY89529LZH?
Use the Request a Quote form on this page to ask about availability, sourcing conditions, and lead time for the obsolete SY89529LZH. Because the device is listed as obsolete, a standard in-stock listing should not be assumed. Include the target quantity, required package form, and whether an approved or documented alternate is acceptable when submitting the request.
What is the current price of the SY89529LZH?
The current commercial terms for the obsolete SY89529LZH are handled through the Request a Quote form on this page. Pricing for an obsolete clock synthesizer can depend on quantity, package form, condition, traceability, and remaining-market inventory. Submit the required quantity and application details so the sourcing request can reflect the exact part rather than a generic clock-generator listing.
What is the lead time for the SY89529LZH?
The lead time for the obsolete SY89529LZH should be confirmed through the Request a Quote form on this page. Lifecycle status and general market availability do not by themselves establish a shippable quantity or delivery date. State the required order quantity, acceptable package form, and target schedule when requesting a quotation and current lead-time confirmation.
Is the SY89529LZH still active or discontinued?
The SY89529LZH is listed as obsolete. Cross-reference information identifies the related SY89529LZH and SY89529LTH entries as obsolete, while the manufacturer continues to provide the device datasheet for engineering reference and legacy-support review. New designs should therefore confirm replacement feasibility before committing to this part.

엔지니어링 참조 데이터: SY89529LZH — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the SY89529LZH when an existing or new high-speed design specifically requires a 200 MHz LVPECL clock, a PLL-based relationship to a 16.66 MHz crystal reference, and adjustable spread-spectrum modulation. It is especially relevant to communications, networking, and high-speed digital platforms where reducing narrowband clock energy can assist system-level EMI control. Do not select it for a basic low-frequency timing requirement, a conventional CMOS clock application, or a design that cannot support LVPECL levels and termination. Because the device is obsolete, use it where continuity with an established circuit is more important than a current product roadmap. For new platform development, verify whether an actively supported clock generator offers the required frequency, jitter, logic levels, spread-spectrum range, package availability, and lifecycle support without carrying legacy architecture constraints.

대체품과의 비교

파라미터 이 제품
Brand Microchip Technology
Package 28-pin SOIC
Device Type Precision spread-spectrum clock synthesizer
Supply Voltage Range 3.135 V to 3.465 V
Maximum Output Frequency 200 MHz
Reference Input 16.66 MHz crystal
Output Logic LVPECL
PLL Yes
Maximum Spread-Spectrum Modulation 0.5%
Product Status Obsolete

주요 차별점

  • Combines a 200 MHz output with adjustable spread-spectrum modulation (vs Conventional fixed-frequency 200 MHz clock)
  • Provides a stated EMI reduction in spread-spectrum operation (vs Fixed-frequency oscillator without spectral spreading)
  • Uses a PLL architecture with a low-frequency crystal reference (vs Direct fixed-frequency oscillator)

설계 노트

Keep the 16.66 MHz crystal, its load components, and the associated SY89529LZH pins physically short and away from high-current switching nodes. Follow the manufacturer application circuit for the crystal load capacitance and grounding arrangement. A compact oscillator loop reduces susceptibility to noise pickup, parasitic capacitance, and startup problems. Preserve a continuous ground reference beneath the clock section so reference jitter and spur performance are not degraded by return-path discontinuities.

Treat the 200 MHz LVPECL output as a controlled-impedance clock network and apply the termination arrangement specified in the manufacturer datasheet. Avoid long stubs, test pads without defined treatment, and unnecessary branch loads. Keep the clock route away from noisy analog inputs and switching-node copper, and verify rise time, ringing, jitter, and receiver compatibility on the assembled board. Spread-spectrum modulation reduces spectral concentration but does not correct a poor physical clock topology.

Provide a low-impedance 3.3 V supply and place the required bypass capacitors close to the power and ground pins using short, wide connections. Estimate the regulator dissipation with P = (VIN − VOUT) × IOUT before committing to the layout, because an LDO requires headroom and dissipates the voltage-drop difference as heat. Use the manufacturer maximum ratings for current and operating temperature, and confirm package thermal performance under the maximum expected clock load.

Validate the completed system with both conducted and radiated emissions measurements because the specified 7 dB EMI reduction is not a guarantee for every board or enclosure. Document the spread-spectrum modulation setting, clock amplitude, termination, and operating mode used during testing. Compare results with the same design operating at fixed frequency to quantify the system-level benefit and check that no new discrete emissions line appears within protected bands.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance declarations are not stated in the available manufacturer document text. Review the current Microchip product-material declarations before using the part in a regulated design.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

SY89529LZH datasheet SY89529LZH pinout SY89529LZH datasheet pdf SY89529LZH specifications SY89529LZH equivalent SY89529LZH replacement SY89529LZH price SY89529LZH stock Microchip SY89529LZH SY89529 200MHz clock synthesizer SY89529LZH SOIC-28 footprint SY89529LZH spread spectrum clock SY89529LZH vs SY89529LTH SY89529LZH LVPECL output

관련 부품 & 용어

Microchip Technology Micrel Semiconductor SY89529LZH SY89529 SY89529LTH precision spread-spectrum clock synthesizer clock synthesizer frequency synthesizer PLL phase-locked loop LVPECL LVTTL LVCMOS 16.66 MHz crystal 200 MHz clock spread-spectrum modulation EMI reduction 28-pin SOIC surface-mount package clock distribution high-speed serial communications jitter clock termination RoHS REACH AEC-Q100
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기