T4080NSE7QTB - QorIQ T4 8-Core 1.8GHz PowerPC MPU | NXP
부품 번호: T4080NSE7QTB ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $950 | $950.00 |
| 10 | $880 | $8,800.00 |
| 50 | $815 | $40,750.00 |
| 100 | $760 | $76,000.00 |
| 500 | $695 | $347,500.00 |
T4080NSE7QTB 개요
A communications processor (CP) is a specialized microprocessor designed for networking and telecom infrastructure where deterministic packet processing, high memory bandwidth, and integrated high-speed serial interfaces replace the general-purpose peripherals found on application processors. Within the broader taxonomy it belongs to the QorIQ family of Power Architecture SoCs, positioned between application processors and pure network ASICs. The T4 line covers 8 to 24 virtual cores in a single pin-compatible package, enabling one PCB design to scale across multiple SKUs.
Key features include 8 hardware threads on 4 physical e6500 cores, dual 10 Gigabit Ethernet controllers, integrated security (crypto enabled), DDR3L memory controller with 1.87 GT/s data rate per the verified distributor datasheet string, and silicon revision 2.0. The e6500 core introduces hardware hypervisor support and out-of-order execution tailored for control-plane and data-plane packet handling.
From an architecture standpoint the device combines the e6500 superscalar core, CoreNet coherency fabric, data path acceleration (DPAA), and SerDes lanes that map directly to networking PHYs. The 1.87 GT/s DDR3L controller supports registered ECC DIMMs, critical for sustained line-rate forwarding on hot packet flows.
Typical applications include enterprise routers, Layer 2/3 switches, network security appliances, LTE baseband offload, and edge compute platforms where deterministic multi-core throughput is required.
When designing with this device, ensure adequate thermal management: the 45x45 mm FCBGA exposes a thermal interface pad for a heatsink or cold plate. Power sequencing and DDR3L termination must follow the QorIQ T4 hardware specification.
This page synthesizes distributor pricing, pin-compatible alternatives, and design considerations not found in the manufacturer datasheet alone.
드롭인 대체품: T4080NSE7QTB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: T4080NSE7QTB (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, Cryptography, Operating Temperature, Package, 10 Gigabit Ethernet.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
T4160NSE7QTB
✅ 드롭인✓ 재고 있음
$640 / 개
데이터시트 보기 →T4240NSE7QTB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
T4081NSE7QTB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
T4161NSE7QTB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
T4241NSE7QTB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
T4080NSE7MQL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
T4080NSE7QTB 최대 정격 & 전기적 특성
| Architecture | PowerPC e6500, 64-bit |
| Core Count | 4 physical cores, 8 hardware threads |
| Maximum Core Frequency | 1.8 GHz |
| DDR Memory Controller | DDR3L up to 1.87 GT/s |
| Ethernet Interfaces | 2x 10 Gigabit Ethernet |
| Cryptography | Enabled (hardware crypto accelerator) |
| 동작 온도 | 0 C to 105 C |
| Silicon Revision | 2.0 |
| 패키지 | 1932-FCPBGA (45x45 mm) |
| 실장 유형 | Surface Mount (BGA) |
| Product Family | QorIQ T4 |
| RoHS 상태 | Compliant |
T4080NSE7QTB 1932-fcpbga (45x45 mm) 핀 구성 가이드
T4080NSE7QTB(1932-fcpbga (45x45 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: T4080NSE7QTB.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
T4080NSE7QTB 적합 용도: 6 애플리케이션s: Enterprise Routers, Layer 2/3 Managed Switches, Network Security Appliances, Wireless Base Station Controllers, Edge Compute Platforms, Telecom Datacenter Switching.
Enterprise Routers
The T4080NSE7QTB fits enterprise router line cards that need deterministic multi-core packet forwarding without the cost of a T4240. Its 8 hardware threads at 1.8 GHz handle OSPF/BGP route calculation, ACL lookups, and QoS classification concurrently with data-plane acceleration through the QorIQ DPAA engine. The integrated 1.87 GT/s DDR3L controller sustains routing-table walks and ACL fetches without stalling the cores. Compared with the higher-tier T4240 (24 threads), the T4080 saves BOM cost while still delivering four e6500 cores' worth of control-plane capacity in the same 1932-FCBGA footprint. Pair this device with an NXP PHY for SFP+ cages and a switching fabric port for chassis integration.
추천
Layer 2/3 Managed Switches
The T4080NSE7QTB is well matched to managed Layer 2/3 switch control planes where 8 threads handle spanning tree, LLDP, SNMP, and forwarding-table management. Hardware crypto acceleration enables MACsec on inter-switch links without burdening the cores, while the dual 10 Gigabit Ethernet controllers aggregate uplinks directly. The 0-105C thermal envelope accommodates the elevated ambient temperatures inside 1U switch chassis with shared airflow. Designers can migrate to the T4160 or T4240 in the same FCBGA-1932 package when port density or feature load increases, reusing PCB, heatsink, and DDR3L topology.
추천
Network Security Appliances
The T4080NSE7QTB powers next-generation firewall and UTM appliances where hardware-accelerated IPsec/TLS and Deep Packet Inspection run alongside control-plane routing. The crypto-enabled e6500 cores offload AES, 3DES, and SHA workloads at line rate, leaving general-purpose cores free for stateful inspection and threat-signature matching. Two integrated 10GE controllers provide WAN-side and LAN-side aggregation without an external switch. Industrial 0-105C support lets this SoC sit inside sealed appliance chassis with passive heatsinks or low-noise fans. The same FCBGA-1932 footprint lets OEMs offer multiple performance tiers by swapping the silicon without re-spinning the board.
추천
Wireless Base Station Controllers
The T4080NSE7QTB integrates cleanly into LTE and 5G baseband controllers that demand deterministic real-time response alongside packet processing. Its 8 hardware threads handle L1/L2 scheduling, retransmission management, and OAM signaling concurrently, while the DPAA engines accelerate cipher and timing-critical packet paths. The 1.87 GT/s DDR3L controller absorbs the bursty memory accesses typical of HARQ buffers and timing-sync tables. The 1932-FCBGA at 45x45 mm is compatible with the QorIQ T4 pinout, allowing OEMs to share one PCB across small-cell and macro-cell product variants. Crypto-enabled silicon secures backhaul links to the core network.
추천
Edge Compute Platforms
The T4080NSE7QTB powers industrial edge gateways and compute nodes that aggregate sensor data, run local analytics, and forward summaries to the cloud. Eight threads at 1.8 GHz with hardware crypto handle TLS termination, MQTT brokers, and on-device inference prep alongside network I/O. Dual 10 Gigabit Ethernet controllers attach directly to upstream aggregation switches while internal SerDes lanes connect to storage or accelerators. The 0-105C industrial range supports edge cabinets exposed to ambient temperature swings. Using the same FCBGA-1932 as the T4160 and T4240 lets OEMs design one carrier board and scale SKU performance later.
추천
Telecom Datacenter Switching
The T4080NSE7QTB is positioned for telecom-grade top-of-rack switching where deterministic forwarding and carrier-class OAM are required. The QorIQ T4 platform's CoreNet coherency fabric and DPAA offload give line-rate forwarding on 10GE ports while the e6500 cores handle routing-protocol stacks and management agents. The crypto accelerator secures OAM, MPLS, and control-plane traffic without dropping packets. Industrial 0-105C operation and the 1932-FCBGA's thermal pad accept chassis-mounted heatsinks typical of 1U/2U telecom designs. Pin compatibility with T4160 and T4240 lets OEMs tier products by port count without respinning the PCB.
추천
추천 제품 요약
엔지니어링 참조 데이터: T4080NSE7QTB — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | T4160NSE7QTB | T4240NSE7QTB | T4081NSE7QTB | T4161NSE7QTB | T4241NSE7QTB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1932-FCPBGA (45x45) | 1932-FCPBGA (45x45) - same | 1932-FCPBGA (45x45) - same | 1932-FCPBGA (45x45) - same | 1932-FCPBGA (45x45) - same | 1932-FCPBGA (45x45) - same |
| Core Count (physical) | 4 e6500 cores | 8 e6500 cores | 12 e6500 cores | 4 e6500 cores (low power) | 8 e6500 cores (low power) | 12 e6500 cores (low power) |
| Hardware Threads | 8 | 16 | 24 | 8 | 16 | 24 |
| Core Frequency | Up to 1.8 GHz | Up to 1.8 GHz | Up to 1.8 GHz | Up to 1.8 GHz (low power) | Up to 1.8 GHz (low power) | Up to 1.8 GHz (low power) |
| DDR3L Controller Speed | 1.87 GT/s | 1.87 GT/s | 1.87 GT/s | 1.87 GT/s | 1.87 GT/s | 1.87 GT/s |
| Hardware Crypto | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled |
| 10 Gigabit Ethernet | 2x 10GE | 2x 10GE | 2x 10GE | 2x 10GE | 2x 10GE | 2x 10GE |
| Operating Temperature | 0 C to 105 C | 0 C to 105 C | 0 C to 105 C | 0 C to 105 C | 0 C to 105 C | 0 C to 105 C |
| Power Profile | Standard | Standard | Standard | Low-power | Low-power | Low-power |
주요 차별점
- Pin-compatible scaling across the QorIQ T4 family (vs T4240NSE7QTB)
- Standard power variant of the T4 platform (vs T4081NSE7QTB)
- Hardware crypto engine enabled (vs Non-crypto SKUs in QorIQ family)
설계 노트
The T4080NSE7QTB is housed in a 1932-ball FCBGA at 45x45 mm and requires a thermal interface on the top of the package to dissipate the QorIQ T4 family TDP. At 0-105C junction operation, designers must size a heatsink or cold plate so that the junction-to-ambient thermal resistance keeps Tj below 105C at worst-case ambient. Forced airflow is typically required in 1U networking chassis; sealed industrial boxes should use a low-profile copper heatsink bonded with a high-conductivity TIM.
The 1932-FCBGA at 45x45 mm demands a high-layer-count PCB (typically 12 to 16 layers) with controlled-impedance routing for DDR3L, SerDes, and 10GE lanes. Use the NXP-supplied footprint and BSDL files directly; do not attempt to recreate the ball map by hand. The DDR3L fly-by topology must follow the QorIQ T4 hardware specification exactly to meet the 1.87 GT/s target. Decoupling capacitors should be placed as close as possible to each BGA power/ground ball cluster.
Power sequencing must follow the QorIQ T4 reference: core voltage before SerDes voltage, with proper monotonic ramp rates. Reverse sequencing or excessive inrush can latch-up the SoC. Additionally, do not assume silicon revision 2.0 is interchangeable with earlier revisions in software - some errata workarounds differ, and the bootloader must match the revision printed on the part. Verify the silicon revision at incoming inspection before flashing firmware.
Keep SerDes lanes (10GE, PCIe, SATA, SRIO) length-matched within the tolerance specified by the QorIQ T4 hardware spec; otherwise link training will fail. Route high-speed differential pairs over a continuous ground reference, with via stubs minimized or back-drilled. Maintain at least 4-layer separation between SerDes and noisy digital regions, and stitch the ground plane aggressively around the BGA to control return-path discontinuities.
규정 준수 정보
RoHS compliance per Mouser, DigiKey, and PCB Electronics listings verified 2026-10-17. REACH and halogen-free status not stated in distributor data - request from NXP for SVHC declaration.
