TDA22590 - 90A Integrated Power Stage | Infineon
부품 번호: TDA22590 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
TDA22590 개요
An integrated smart power stage is a DC-DC converter subsystem that combines semiconductor switching elements and their drive circuitry in one package. In the power hierarchy, it belongs to synchronous buck converters, which are DC-DC converters and power-management devices. Compared with a discrete synchronous-buck implementation, the integrated arrangement can reduce external switching-component count and simplify high-current layout, while still requiring careful inductor, capacitor, thermal, and gate-drive design.
The TDA22590 provides up to 90 A output and supports conversion from 4.25 V to 16 V down to 0.225 V to 5.5 V. That range suits CPU, GPU, FPGA, DDR memory, telecom, controlled, and uncontrolled power-conversion systems identified in the manufacturer materials. Its integrated MOSFETs support a compact synchronous-buck topology, while the current-reporting feature can assist a controller in monitoring phase current.
The device is designed for demanding multiphase rails where low profile, high current, and integrated power semiconductors are important. The 4 mm × 6 mm package supports placement close to the load, but package current capability is not the same as continuous application current: output current depends on switching frequency, inductor selection, PCB copper area, thermal conditions, duty cycle, and control-loop settings.
Typical uses include server processor rails, accelerator supplies, memory-array regulators, FPGA power systems, and telecom power converters. In these systems, the TDA22590 can be arranged with external inductors, input capacitors, output capacitors, and a controller implementing multiphase power delivery. The low quiescent-current synchronous-buck gate-driver architecture helps reduce standby demand while the integrated MOSFETs handle the power path.
A critical design consideration is the separation of power and signal paths. VIN, VCC, VDRV, PG, current-reporting, ground, and switch-node connections must follow the manufacturer layout guidance, with very low-inductance power loops and careful placement of high-current copper. The UFLGA package is not represented by an exact pinout in the supplied verified data, so the complete pin map cannot be safely reconstructed here. The manufacturer datasheet should remain the authority for pin numbering, exposed-pad treatment, capacitance values, and recommended layout.
This page combines verified manufacturer specifications, source links, pricing fields, application guidance, and validation notes for engineers evaluating the TDA22590 in high-current power-conversion designs.
드롭인 대체품: TDA22590 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
TDA22590XUMA1
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TDA22590XUMA2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TDA22590 최대 정격 & 전기적 특성
| Product Type | Integrated smart power stage |
| 토폴로지 | Synchronous buck |
| 최대 출력 전류 | 90 A |
| 입력 전압 범위 | 4.25 V to 16 V |
| 출력 전압 범위 | 0.225 V to 5.5 V |
| VCC Supply Range | 4.5 V to 5.5 V |
| VDRV Supply Range | 4.5 V to 5.5 V |
| Integrated Elements | Gate-driver IC, control MOSFET Q1, synchronous MOSFET Q2, Schottky diode |
| Current Sensing and Reporting | On-chip, 5 μA/A |
| 패키지 | PG-UFLGA-34, 4 mm × 6 mm |
| 출력 구성 | 1 output |
| Application Category | CPU, GPU, FPGA, and DDR voltage regulators |
| Telecom Support | Controlled and uncontrolled telecom converters |
| Converter Profile | High-frequency, low-profile DC-DC converter |
| Current Report Transfer Ratio | 5 μA/A |
| Manufacturer Technology | industrialOptiMOS 6 |
| Datasheet Document Identifier | TDA22590 DataSheet v01_00 EN |
| Package Pin Count | 34 pins |
TDA22590 34 pins 핀 구성 가이드
TDA22590(34 pins 패키지)의 핀 구성입니다. 이 전력 소자는 게이트, 드레인, 소스 단자를 갖추고 있습니다. 비편향 패키지의 경우 정확한 핀 1 방향과 풋프린트 세부 정보는 제조사 데이터시트를 참조하십시오. 일반적인 응용 분야로는 전원 공급 장치 설계, 모터 구동, 부하 스위칭이 있습니다.
다음에 대한 상세 핀아웃 데이터 없음: TDA22590.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
안전 동작 영역
일반적인 애플리케이션
TDA22590 적합 용도: 6 애플리케이션s: Server CPU Power Rails, GPU and Accelerator Power, FPGA Voltage Regulation, DDR Memory Array Regulation, Telecom Power Conversion, Industrial Low-Voltage DC-DC.
Server CPU Power Rails
The TDA22590 fits high-current server CPU rails because its verified specifications identify up to 90 A output, 4.25 V to 16 V input, and 0.225 V to 5.5 V output capability. It integrates the synchronous-buck gate driver, control MOSFET Q1, and synchronous MOSFET Q2, reducing the number of external power-switching components while preserving a compact power-stage footprint. In a multiphase converter, the 5 μA/A current-reporting feature can provide proportional phase-current information to the controller. The 4 mm × 6 mm package must still be evaluated against the complete manufacturer layout and thermal limits; the 90 A rating is not a guarantee of 90 A continuous operation on every PCB.
추천
GPU and Accelerator Power
The TDA22590 is suitable for GPU, accelerator, and other high-current low-voltage rails because the manufacturer describes a 90 A industrialOptiMOS 6 power stage with a 4.25 V to 16 V input range and output adjustable from 0.225 V to 5.5 V. Its integrated synchronous-buck elements help place the switching path close to the load and reduce board-level component count. In a multi-rail accelerator system, separate phases or stages can be assigned to different rails while the controller manages sequencing and current sharing. Designers should validate transient response, inductor saturation margin, capacitor ESR and ESR-related ripple, thermal rise, and the package’s exposed-pad layout before release.
추천
FPGA Voltage Regulation
The TDA22590 can support FPGA and other programmable-logic voltage requirements because its verified output range reaches 0.225 V to 5.5 V and its input range spans 4.25 V to 16 V. The integrated control and synchronous MOSFETs support a compact synchronous-buck implementation, while the separate VCC and VDRV supplies operate from 4.5 V to 5.5 V. This arrangement is useful when an FPGA rail requires multiple phases or when board space restricts discrete power components. The controller must be configured for the selected switching frequency, current sense, ramp, and fault behavior, and the supply rail must remain within the datasheet’s electrical limits at startup and during transient events.
추천
DDR Memory Array Regulation
The TDA22590 is applicable to DDR memory-array power systems where low-voltage, high-current delivery and compact packaging are important. Its verified 90 A output class and 0.225 V to 5.5 V output range fit the general class of CPU, GPU, FPGA, and DDR regulators identified by Infineon. The synchronous-buck configuration can reduce external switch count and provide a controlled power path for memory rails. DDR applications require careful transient-load analysis, current-limit behavior, output-capacitor selection, and verification of the controller’s compatibility with the power-stage current-reporting signal. The manufacturer datasheet remains the authority for electrical limits and layout.
추천
Telecom Power Conversion
The TDA22590 is identified in the manufacturer materials for high-frequency, low-profile DC-DC converters and controlled or uncontrolled telecom applications. Its integrated synchronous-buck power stage can simplify telecom power-supply assemblies by combining the driver, control MOSFET, synchronous MOSFET, and Schottky diode. The 4.25 V to 16 V input range and 4.5 V to 5.5 V auxiliary supplies fit the stated operating conditions. Telecom designs must additionally account for system transient requirements, fault response, current sharing, derating, isolation boundaries where applicable, and the thermal performance of the PCB. No compliance certification was supplied, so compliance claims must be verified separately.
추천
Industrial Low-Voltage DC-DC
The TDA22590 can serve industrial low-voltage DC-DC systems that require a high-current synchronous-buck stage in a small package. Its verified 90 A output capability, broad input range of 4.25 V to 16 V, and output range of 0.225 V to 5.5 V provide a useful starting point for programmable, communications, and computing rails. The integrated low-quiescent-current synchronous-buck gate-driver architecture can reduce the external component count, but the final design still needs verified inductors, input and output capacitors, control-loop settings, current limiting, and fault handling. Industrial temperature, vibration, isolation, and regulatory requirements are not specified in the supplied data and must be checked separately.
추천
엔지니어링 참조 데이터: TDA22590 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TDA22590XUMA1 | TDA22590XUMA2 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-UFLGA-34, 4 mm × 6 mm | PG-UFLGA-34 | PG-UFLGA-34 |
| Product Type | Integrated smart power stage | OptiMOS converter power stage | DC-DC converter power stage |
| Applications | CPU, GPU, FPGA, DDR, telecom | CPU and GPU voltage-regulator IC | DC-DC converter |
주요 차별점
- High integrated output-current capability (vs TDA22590XUMA1)
- Integrated synchronous-buck power path (vs TDA22590XUMA2)
- Proportional current reporting (vs TDA22590XUMA1)
설계 노트
Treat VIN as a high-current power rail and keep the input-capacitor, power-stage, and inductor current loops as short as possible. The verified TDA22590 input range is 4.25 V to 16 V, while VCC and VDRV are separate 4.5 V to 5.5 V supplies. Validate capacitor ripple current, inductor current rating, copper width, and startup current before applying the 90 A device rating in a real design.
The 90 A rating identifies the power-stage class, not guaranteed continuous application current. Estimated power loss must be calculated from actual conduction loss, switching loss, gate-drive loss, output-voltage difference, duty cycle, switching frequency, and ambient temperature. Use the manufacturer’s thermal characterization and verify junction temperature with the actual PCB copper area, airflow, and neighboring heat sources.
Place input capacitors close to the power-stage VIN and ground connections, and place the controller, current-sense network, and auxiliary decoupling according to the Infineon recommended layout. The verified package is PG-UFLGA-34 in a 4 mm × 6 mm outline, but the complete exposed-pad and pin arrangement must be taken from the official package drawing before routing copper or defining a land pattern.
Do not confuse the 4.25 V to 16 V VIN range with the 4.5 V to 5.5 V VCC/VDRV supply range, and do not assume that a distributor listing confirms stock, pricing, or lifecycle commitment. The TDA22590’s current-reporting output is specified at 5 μA/A, so controller scaling, filtering, polarity, and fault thresholds must be implemented from the manufacturer’s electrical and application information.
규정 준수 정보
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than being inferred.
