THS1007CDA - 10-Bit 6 MSPS Quad ADC | Texas Instruments
부품 번호: THS1007CDA ✓ 활성THS1007CDA 개요
An ADC is an interface IC that converts an analog voltage into a digital code for processing, measurement, or control. A simultaneous-sampling ADC captures all four channels during the same conversion interval, allowing phase, gain, timing, and vibration signals to be compared without the timing offset introduced by sequential multiplexers. Within the product hierarchy, the THS1007CDA is an ADC, a data-conversion IC, and a semiconductor.
The principal features include 10-bit resolution, four analog inputs, simultaneous sampling, and a 6 MSPS conversion rate. Its parallel interface supports direct connection with digital signal processors and microprocessors, while automatic channel scanning helps reduce control overhead in multichannel systems. The manufacturer also identifies internal reference voltages of 1.5 V and 3.5 V and permits an external reference when tighter DC accuracy or temperature-drift control is required.
The converter uses a proprietary sampling architecture and a pipelined conversion process. Four analog inputs are sampled simultaneously, and the resulting digital values are presented through the parallel data interface. This architecture is useful when preserving relative timing among channels matters more than using the highest conversion rate available from a multiplexed converter. Because the part is specified for a 4.75 V to 5.25 V supply, system designers should account for the voltage relationship among the analog inputs, digital interface levels, reference voltage, and supply rails.
Typical uses include industrial process monitoring, vibration analysis, motor and drive diagnostics, instrumentation, communications equipment, and multichannel data-acquisition systems. Simultaneous sampling is particularly valuable in vibration monitoring, where phase differences between sensors can reveal imbalance, misalignment, or mechanical resonance. The parallel bus is also appropriate for systems whose processor reads complete conversion frames rather than using a serial ADC.
For a robust design, follow the pin-description table and application circuit in the manufacturer datasheet, place analog and digital return paths carefully, and account for acquisition time, reference accuracy, input bandwidth, and digital-interface timing. The TSSOP package provides a compact surface-mount solution, but its exposed thermal behavior and the converter's operating range should be checked against the system temperature requirements.
드롭인 대체품: THS1007CDA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: THS1007CDA (동일 폼 팩터 및 풋프린트) — 차이점: Package Type.
THS1007IDA
✅ 드롭인가격 문의
데이터시트 보기 →THS1007CDA 최대 정격 & 전기적 특성
| Converter Type | 10-bit pipelined ADC |
| Analog Input Channels | 4 channels |
| Sampling Architecture | Simultaneous sampling |
| Conversion Rate | 6 MSPS |
| 분해능 | 10 bit |
| Output Interface | Parallel DSP/microprocessor interface |
| Analog Supply Voltage | 4.75 V to 5.25 V |
| Internal Reference Voltage 1 | 1.5 V |
| Internal Reference Voltage 2 | 3.5 V |
| External Reference Support | Yes |
| Channel Auto-Scan | Supported |
| Commercial Operating Temperature | 0°C to 70°C |
| Industrial Operating Temperature | -40°C to 85°C |
| Package Type | TSSOP-32 |
| Terminal Count | 32 terminals |
| Package Shape | Rectangular gull-wing |
| 실장 유형 | Surface mount |
| Power-Supply Voltage | 4.75 V to 5.25 V |
THS1007CDA rectangular gull-wing 핀 구성 가이드
THS1007CDA(rectangular gull-wing 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: THS1007CDA.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
THS1007CDA 적합 용도: 6 애플리케이션s: Industrial Process Monitoring, Vibration and Condition Monitoring, Motor Drive Diagnostics, Communication Receiver Front End, Precision Instrumentation, Data Acquisition Systems.
Industrial Process Monitoring
The THS1007CDA suits multichannel industrial monitoring because it captures four analog signals simultaneously at a 6 MSPS conversion rate and resolves each channel to 10 bits. Place the four sensors on separate analog inputs and read complete frames through the parallel DSP or microprocessor interface. Simultaneous sampling prevents channel skew from being confused with real process timing, while automatic channel scanning can simplify repetitive acquisition sequences. The 4.75 V to 5.25 V supply requirement should be coordinated with sensor excitation, analog signal conditioning, and the downstream processor.
추천
Vibration and Condition Monitoring
The THS1007CDA is well suited to simultaneous vibration measurement because four sensor channels can be sampled during each 6 MSPS conversion interval. This timing relationship helps engineers compare phase and amplitude between accelerometers mounted at different machine locations. The 10-bit resolution provides 1,024 digital codes per conversion, while the parallel interface supports efficient frame transfer into a DSP or microprocessor. Apply suitable input protection and analog filtering before the converter when machinery transients or out-of-band vibration content could exceed the intended input range.
추천
Motor Drive Diagnostics
The THS1007CDA can acquire current, voltage, or position-related feedback from four channels at the same sampling instant for motor-drive diagnostics. Simultaneous sampling is valuable when the controller must compare phase relationships between feedback quantities rather than merely sample them one after another. A 6 MSPS rate and 10-bit resolution support rapid capture of transient behavior, while the parallel interface allows frames to be transferred efficiently to a control processor. The design must preserve signal integrity between the power stage, analog front end, converter, and digital control system.
추천
Communication Receiver Front End
The THS1007CDA can form part of a communications receiver front end when four received or mixed analog channels require consistent timing. Its 10-bit conversion resolution and 6 MSPS sampling rate are appropriate for intermediate-frequency, envelope, or demodulation measurements where the selected bandwidth falls within the converter's acquisition capability. The parallel output supports direct processing by a DSP, while simultaneous sampling helps preserve relative phase between channels. Reference selection remains important because internal 1.5 V or 3.5 V references or an external reference affect DC accuracy and drift.
추천
Precision Instrumentation
The THS1007CDA is appropriate for instruments that acquire several analog quantities, such as a sensor bridge, a reference measurement, a temperature channel, and a calibration signal. Four simultaneous samples make the resulting data easier to compare than a multiplexed sequence, and the 6 MSPS rate provides ample timing margin for many measurement systems. An external reference can be selected when calibration accuracy and temperature drift are more important than using the internal 1.5 V or 3.5 V references. Follow the manufacturer input-conditioning and acquisition-time guidance.
추천
Data Acquisition Systems
The THS1007CDA provides a compact four-channel acquisition section for a parallel-bus data-acquisition system. Each conversion produces simultaneous samples that can be stored and processed as a coherent frame, while the 6 MSPS rate supports higher throughput than many slow-resolution multiplexed converters. The 32-pin TSSOP package limits board area, and automatic channel scanning can assist repetitive operation. The parallel interface requires careful bus timing and signal-integrity layout, particularly when data lines connect to a processor operating at a different clock rate.
추천
추천 제품 요약
엔지니어링 참조 데이터: THS1007CDA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | THS1007IDA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | TSSOP-32 | TSSOP-32 |
| Resolution | 10 bit | 10 bit |
| Conversion Rate | 6 MSPS | 6 MSPS |
| Analog Input Channels | 4 channels | 4 channels |
| Sampling Method | Simultaneous sampling | Simultaneous sampling |
| Operating Temperature | 0°C to 70°C | -40°C to 85°C |
| Power-Supply Voltage | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Output Interface | Parallel DSP/microprocessor interface | Parallel DSP/microprocessor interface |
| Automatic Channel Scan | Supported | Supported |
주요 차별점
- Maintains simultaneous four-channel sampling (vs THS1007IDA)
- Commercial temperature characterization (vs THS1007IDA)
- Parallel processor-oriented interface (vs THS1007IDA)
설계 노트
Route the parallel data bus with continuous references to ground and match its length where practical. Keep analog input traces away from the digital output bus, especially the clock and data lines that switch during acquisition. Place input filtering, reference decoupling, and analog circuitry close to the TSSOP-32 device. Use a solid ground plane and provide a low-impedance return for the converter rather than routing analog and digital return currents through a narrow shared path.
Check acquisition time, input bandwidth, source impedance, and conversion timing together; adequate resolution does not guarantee that a high-impedance sensor can charge the sampling network quickly enough. Add the recommended bypass capacitors at the supply and reference pins, and use an external reference when the measurement requires better DC accuracy or lower temperature drift than the internal 1.5 V and 3.5 V references provide.
Do not assume that identical functions guarantee identical timing on a mixed commercial and industrial design. The THS1007CDA and THS1007IDA are both described as 10-bit, 6 MSPS, four-channel simultaneous-sampling converters, but their temperature ranges differ. Before using THS1007IDA as a drop-in replacement, verify the complete pin assignments, reference behavior, control timing, acquisition sequence, and worst-case performance in the manufacturer documentation.
The TSSOP-32 package dissipates converter power as a function of supply voltage, conversion activity, digital output loading, and ambient temperature. Evaluate the operating temperature against the commercial 0°C to 70°C limit for THS1007C or the industrial -40°C to 85°C range for THS1007IDA. Provide sensible copper around the package and avoid placing the converter next to a heat source that pushes the junction temperature beyond the device rating.
규정 준수 정보
Compliance status requires confirmation from the manufacturer product page or current declaration documents.